I need to extract the credit card expiration date from a cell. For example
1111 1111 1111 1111 1/17 code 1111
I was able to get the /17 using =MID(C77,FIND("/",C77),4)
However, I can't get the "1" before the /.
I have a database which holds a field for people's credit card numbers. When I try to import them into excel it removes the last number and replaces it with a 0. So if I have credit card number 123456789123456 it will show as 1.23456E+15. Then when i format it as a number is shows as 123456789123450.
View 11 Replies View RelatedI have a userform capturing Credit Card Numbers for Visa, Master, Amex and Diners as part of a payment tracking system and would like to check that the entered Card Number is valid before processing the payment through a third-party website to minimize to number of error / invalid card messages.
I suspect there is some kind of checksum built into the cardnr. Any tips on how to check for the validity would be appreciated, including links to relevant sites.
this question is related to an earlier question of mine: [url]
I wonder if there is a possibility of the expiration date is in a cell, and that the file is not self-exclude, either block until just change the date in the cell.
Code:
Private Sub Workbook_Open()'If Date
I have an excel program that I want to set an expiration date on it, such as 30 days from the first time it's opened. After 30 days, activeworkbook.close
View 13 Replies View RelatedI have looked through your forums the last few hours. I have found similar code to what I'm looking for... but not quite.
I have a date in B2 (10-May-07)
I have an expiration date in C2 (10-May-08)
I want D3 to show months to expiration first (in this case 7)
Then I want it to highlight in yellow 90 days out
Then I want it to highlight in orange 60 days out
Then I want it to highlight in red 30 days out
I use Excel 2007, however I want the code to work with 2003.
I have a macro which has a digital certificate. When the macro runs i want to somehow readin the expiration date of the certificate and make sure its still valid before running the macro.
View 6 Replies View RelatedI am charged with building a predictive model that can find items in a hospital inventory that will expire before they are used. The idea is simple: if I use an item every week, this item has an expiration date of 50 weeks from now, and I have 60 on the shelf, then I will likely expire 10 of the items.
The complexity is that there are multiple expiration dates. So, I want be able to look down a list of 3000 items, find the multiple entries of expiration dates, and isolate them based on criteria (select, for example, the first chronologically expiration date).
I have created a qualification tracking spreadsheet to track when qualifications are coming due. Each cell may have a different date based on when that employee initially got that qualification. I want the cell that the initial qualification date is typed in to turn "red" after 180days, "orange" after 120 days and "yellow" after 90 days. I have a formula that does close to what I need, but it changes the cell next to it in color.
That code is as follows: =AND(A1<>"",Today()>=A1+90,B1="")
I have attached the sheet, what I am trying to do. Basically columns B-E and rows 2-35 are the ones that need the formatting.
Streiffs_Weapons_Warfare_Qual Tracker.xls
I'm trying to use the COUNTIFS function & have run into trouble because the 2nd criteria is a date. Typically I would just set the range & then put "01/01/2014" if I was looking for all of the January 1, 2014 cells. However in this spreadsheet my source data contains the date with the time. (01/01/2014 11:27:39 AM). Becasue the time is included in the cell, the function returns no results when I set teh date.
I tried to use a wild card "01/01/2014*" which I thought would bypass the time but it still retuns no results. Is there a way to use a windcard with a date cell?
In cell A1 i have a drop-down list.
In this list are the following:
London [S] (14/02/2013)
Rome [W] (23/10/2013)
Tokyo [W] (17/01/2014)
Berlin [A] (24/02/2014)
...and so on...
In cell B1 I would like to extract the currently selected city name and the [?] (e.g. "London [S]")
In cell C1 i would like to extract the currently selected date (e.g. (14/02/2013)
I've had a question which i can't solved cause of poor knowledge. Example of my issue: cel A1 are filled with a lotnumber like 107610618. as 107=year 2007 61=code of product 06=month 18=runnumber. in cel B1 i would like to have a few characters of that lotnumber visible. all that i want to show in cel B1 = month & year example 0607. Then when this is done in cel C1 i would like to convert this characters into june-07.
View 6 Replies View RelatedI have a sheet which details specific card numbers in Column A, and the date and place of transaction in the Column B. This very long list contains multiple entries for each card number. What I would like to do is use Sheet2 to list each card number and the number of times it appears in the list.
View 4 Replies View Relatedi have data in column A and i want extract to column B only the date from this data. Date start on diferent position.
ex:
col. A
1 text text 10.10.1998 text
2 text10.12.2001
3 10.12.2004
4 10.12.2005 text text
i want this result
col. B
1 10.10.1998
2 10.12.2001
3 10.12.2004
4 10.12.2005
i try solution from other thread, but it doesnt works for me.
I have a date as 1/1/11 format in a date-formatted cell A1 for example. I want to extract the month in MM format, i.e. January, or "1" is extracted as "01", etc and just place it into A2.
So far, I've found an option to use format function in VBA and "MM", but I'm not familiar with VBA yet.
In Cell A1 Value is: 20070322_023047_002035_1112223333
above code is like Date(YYYYMMDD)_Time(HHMMSS)_Agent#_Phone#
I want result As per Following:
In Cell B1: 03/22/2007 Date(MM/DD/YYYY)
In Cell C1: 02:30:47 Time([HH]:MM:SS)
In cell D1: 002035
In cell E1: 111-222-3333
Trying to extract data from Column C which contains date and time and number
example :
column c cell contains
<html><b>04/12/13 00:44 - text:</b><br>Event xxxxxxxx, yyyyyyy assigned. <br>Reference ID associated with event. ID: 123456<br><br></html>
need to extract and paste in Cloumn D
04/12/13 00:44
and column E to contain
123456
note : <html><b>04/12/13 00:44 - ( <html><b> and event. ID: is constant in all my cells)
I get one report.xls workbook by FTP. This book contain date and time in cell A14 in sheet1. e.g. 30-04-2006 19:38:00
I need to have macro to extract only time and paste it to cell A56 in same sheet. How can I do that. The date format is 30-04-2006 19:38:00 and it may be 05/05/2006 7:15 am. Or it could be any type of date format. Please send me how can I work with different date and time format to extract the only time and paste to other cell.
I need a macro that searches through column F(amount). If it finds a negative amount(a credit note), it should search through column A(client ID), look for the same client and deduct the amount from the oldest invoice of this client. Then it should delete the whole line of the credit note.
If it doesn't find the same client, it should not adjust anything.
If the negative amount is a cancellation(all records with the invoice number 9999999), it should not adjust anything.
If the amount of the oldest invoice is smaller than the credit note, it should deduct down to 0 and deduct the rest of the credit note from the second oldest invoice.
I have attached a sample file : makro credit note.xlsx‎
I have been trying to write a macro but its getting very complicated and im just getting confused. I need to look through a long list of data and see if there is a comparable figure. e.g if there is £350 at branch A for supplier X, i need to know if there is also a credit of £350 at branch A for the same supplier..
The problem is that the comparable figure could be above or below the original figure. Then i will delete both these lines from the list. I have tried to do this but have got cofused by so many if and else formulas.
Why doesn't a three column formula work?
Column C is Credit, D is Debit, E is Balance
I put the following formula in the Balance column
=E21+C22-D22
where the first term refers to cell immediately above. In other words, this formula takes the prior balance, adds a credit if any, subtracts a debit, if any, and gives a new balance.
The formula worked on the cell I put it in. It will not work when I copy and pasted it into the cell below the first one. Error I get is circular reference.
I am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
i have several styles to handle mentioned under different rows separately.
all the styles have their various raw materials inward date mentioned under different column of their respective rows from column Q to Y
now i need to 1. extract the latest date of any particular raw material which can be in any of column from Q to y columns ACCORDING TO DIFFERENT STYLES IN A Particular row automatically that is AC
Extract data with differing date formats that I need to convert to something consistent that I can format as a date.
This is an example of data.... all with general format at the moment.
2/28/2013 2:48:53 PM
1/16/2013 10:48:50 AM
12/17/2012 11:59:49 AM
I have used this formula to extract the date portion, but I can't get this to then format as date. How do I convert this to the julian date, so I can then apply a date format?
=LEFT(G9,SEARCH("/",G9)+7)
(The day portion of this date always has a leading zero).
I have two questions regarding date format and hope you can provide input.
1) say 01/01/2010 displays as Jan-10 and i need a new column to state it as JAN. What function should i use to achieve it?
2) i need to state the difference between first day and last day of the month. What function should i use to achieve it?
I work in a HR department and I'm trying to create a spreadsheet to track the amount of extra-duty hours each worker has. For every extra hour they work today, they can use this hour next time.
Screen Shot 2014-03-31 at 9.25.22 pm.png
This is my current spreadsheetCredit hours means hours added to their 'account'.Debit means hours taken out.Hours will expire in X days if not utilised.Right now, each worker has their own spreadsheet in the same workbook.I have about 25 workers.Is this the best way to manage this?How can I create a 'bank account' system to track their hours?
hourstracking.xlsx
I have a large document control register and it is updated daily and posted to a cloud for many people to access. It is very time consuming to constantly jump in and out and highlight and unhighlight as many things as there are and keeping track of which items that need to be unhighlighted. The thing I'm trying to figure out is if there is a formula for this...If i change any cell in a row I want the row to highlight itself entirely, but after 24 hours I want the highlight to expire. Is there a formula or function I can use to make this happen?
View 4 Replies View RelatedI have a vba code for an excel spreadsheet that lets me know when a particular persons' certification is about to expire (within 31 days). However what I cannot figure out is how to make this work with more than one expiration date ( additional columns containing other certification dates). I keep getting errors when trying to add additional columns to check ( I do admit that my VBA coding is atrocious at best).
Ultimately what I would like to achieve is a list of names with expiration dates alongside popping up when opening, but maybe I am asking too much?
I need to set up a conditional formatting formula to show when a certificate of approval is within 90 days of expiring and when it actually has expired.
The conditional formatting is in column A and the expiration date is in column I.
I am new at excel and have very limited experience. I have a employee training database, with employees (in column A2:A54) and the certification names (in row A1:AS1) that I must generate a monthly report on employees that are expiring within the current month. The cells are already conditionally formatted to change colors for one month prior to expiration date, current month of expiration date, and past the expiration date.
I am manually gathering the data then adding it to another sheet. In the mist of trying to gather data, I am missing and/or overlooking information. I wanted to know if there is a way to automatically generate a report based on the expiration dates that would pull the employees name and which certification is expiring or expired, preferable both. I have tried reading threads and applying advanced filters but due to the number of certifications it is not functional to do it this way.
I have attached a sample of the spreadsheet : ETD.xlsx‎