I'm trying to write a macro that will look at a table of data, and if column J is blank, it will delete the entire row and shift the data up. Also, if there is a "C" in column C, it will delete that entire row as well. I tried the code below, but for some reason it is not deleting all of the rows that it should. Is there some kind of problem with the code that I'm not catching? It looks like it should work perfectly...
View 9 RepliesI'm sure this is simple code, but...
I have a data table with over 20,000 rows that refreshes each day. I need to run a bit of code when it refreshes that says if the value in column R is 2, then delete that row.
I need to delete rows that are blank, 0, or contain errors (#REF, #N/A, etc). My problem is that once in a while, an error will show up in a singe cell of a row that I need to keep so a simple deletion of only errors/blanks/0 will not work for me.
The two cells I need to check for errors, blanks, and 0's are D and E. There can be an #N/A in col D and a 0 in col E or both D and E can have errors. Blanks will occur in all cells of the row.
I have tried to use the code below but it doesn't do anything, but it also doesn't give me an error.
Code:
Sub DeleteAll()
Windows("Template.xls").Activate
Dim r As Long
For r = 2 To 36500
If Range("D" & r).Value = "#N/A" And Range("E" & r).Value = "#N/A" Then
Range("D" & r).EntireRow.Delete = True
[code].....
I found a useful resource on the web that gives a macro that deletes rows when the cells within a SINGLE column are identical. [url]
Does anyone know of a macro that can do more than that, one that will delete rows if ALL cells within ALL columns are identical?
For example, the macro should delete row 4 of the attached spreadsheet. It should leave row #2 there because it's the orginal row. But the duplicate row #4 should be deleted. The macro should leave row #5 there because not all columns are identical for that row.
I am having trouble coming up with an algorithm for deleting columns, based on a certain set of criteria. Heres the issue, all the columns have a "1" the top of column . If that column has a cell number that's greater than or equal to 0.90 or less than or equal to -0.90 then that column gets deleted, if it just has a "1" then the row doesn't get deleted. Very complicated set of criteria.
View 6 Replies View RelatedMy data in excel looks like this:
A B C D
Visit_Date Day_of_the_VisitHousing_Tour_TimeNumber_in_Party
3/22/2012 0:00Thursday 12:00 P.M. 2
3/22/2012 0:00Thursday 12:00 P.M. 4
3/22/2012 0:00Thursday 12:00 P.M. 1
3/22/2012 0:00Thursday Not Requested 2
3/22/2012 0:00Thursday 12:00 P.M. 3
3/22/2012 0:00Thursday 12:00 P.M. 3
3/22/2012 0:00Thursday 12:00 P.M. 4
3/22/2012 0:00Thursday Not Requested 1
3/22/2012 0:00Thursday 12:00 P.M. 2
3/23/2012 0:00Friday Not Requested 2
3/23/2012 0:00Friday Not Requested 5
What I'd like to be able to do is if Column A,B, and C are the same to sum column D. So, for example, I would like the data above to look like this:
A B C D
Visit_Date Day_of_the_VisitHousing_Tour_TimeNumber_in_Party
3/22/2012 0:00Thursday 12:00 P.M. 7
3/22/2012 0:00Thursday Not Requested 3
3/22/2012 0:00Thursday 12:00 P.M. 12
3/23/2012 0:00Friday Not Requested 7
I work with a spreadsheet every week to input values and subtotal them. These values change constantly and instead of going through and manually deleting each row in a 100+ row spreadsheet to be able to import into another program, I'm looking for an quicker way to keep my data in order but consolidate by getting rid of only the rows where both column A and B are blank.
Here's an example of what I'm working with:
5
10
15
20
50
2
4
6
8
20
This is what I need the final product to look like:
5
10
15
20
50
2
4
6
8
20
So I would like to quickly delete rows 2, 5, and 11. All of the other answers I've found only show how to delete rows based on empty cells in only 1 column. How can I quickly delete the rows where both columns are empty?
two things on the attached sheet.
First problem: in column B, I have a formula based on contents of column A. However, the limitations of 7 nested IFs leaves me with errors - I need 3 more IFs. Is there a way around that?
Second problem: I need to show the row of the first (earliest time in column A) and the last (latest hour in column A) record for each name. I've been sorting by name and time, then manually deleteing the rows I don't need. I know there's a better way, but I can't find it!
I have a spreadsheet with hundreds of rows. Columns C and D contain either TRUE or FALSE. I want to be able to automatically delete the rows where both columns are FALSE.
View 1 Replies View RelatedI am having trouble with the .SpecialCells(xlCellTypeBlanks)
What I need to do is for a macro to first go through a range ("G8:G50"), Add a 0 value to any blank cell.
Then I want the macro to delete the entire row for any of the cells that have a value of 0 in that range of "G8:G50"
Will excel allow text to be permanently be positioned in a specific cell even if rows or columns are added?
View 6 Replies View RelatedUsing the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
I have a column with dates (dd.mm.yy) and I have a column with names. Moreover, several dates and names are repeated. What is needed, is to delete all the rows in which the difference between dates is smaller than 1825 days (5years) for the same name. (Namely, if I have three rows 01.01.1996 - "A"; 01.01.2002 - "A" ; 01.01.2005 - "A" I want all the rows with "A" to be deleted)
View 5 Replies View RelatedI run a daily report that contains material usage and I copy that into a workbook designed for Data Analysis. I only keep a years worth of usage in the workbook so I need part of my macro to look at todays date and delete anything that is older than a year.
View 4 Replies View RelatedI would like to delete rows in a worksheet based on a value of a cell within that row. The worksheet will not always have the same number of rows. I will be looking at the value of each cell in column "AD", which is a date, and if it is not equal to 00/00/0000 then I want to delete that row.
View 7 Replies View RelatedI have the following data
Ticket NumberOriginSectorDescFB DataPax NameClassPointO CCRegionDestin
976533060397MAADXB-DFWCDHJKL3SD RAJESHFirstDFW---
976533060397MAALIT-DFWCDHJKL3SD RAJESHFirstDFW---
976533060397MAADFW-DXBCDHJKL3SD RAJESHFirstDXBUS--
976533060397MAADFW-LITCDHJKL3SD RAJESHFirstLITUS--
976533060397MAADXB-NBOCDHJKL3SD RAJESHFirstNBO--NBO
976533060397MAANBO-DXBCDHJKL3SD RAJESHFirstDXB---
976533060398MAADXB-DFWCDHJKL3SD RAJESHFirstDFW---
976533060398MAALIT-DFWCDHJKL3SD RAJESHFirstDFW---
976533060398MAADFW-DXBCDHJKL3SD RAJESHFirstDXBUS--
976533060398MAADFW-LITCDHJKL3SD RAJESHFirstLITUS--
976533060398MAADXB-NBOCDHJKL3SD RAJESHFirstNBO--NBO
976533060398MAANBO-DXBCDHJKL3SD RAJESHFirstDXB---
I need to delete rows based on following conditions, If,
Ticket number, origin, FB Data, Desc, pax name is same i need to delete all rows except the Row which has Destin filled in. In the above example I need rows only with NBO
Result should be as follows,
Ticket NumberOriginSectorDescFB DataPax NameClassPointO CCRegionDestin
976533060397MAADXB-NBOCDHJKL3SD RAJESHFirstNBO--NBO
976533060398MAADXB-NBOCDHJKL3SD RAJESHFirstNBO--NBO
I need one more criteria to be tested the above result. IF,
origin, FB Data, Desc, pax name is same and ticket no is A1+1 i need to delete the second row
Final result should be
Ticket NumberOriginSectorDescFB DataPax NameClassPointO CCRegionDestin
976533060397MAADXB-NBOCDHJKL3SD RAJESHFirstNBO--NBO
This is the final code needed...
Col G = Product #
Col H = Description
if Col H ( description ) has 'CVP' or "CO2" or 'CKN' = delete row
unless....
Col G is 617367, 858556, or 882949 then keep that row..
I have this excel file where I every day have over 10.000 rows. I have 2 sheets, one called "Data" and once called "Include list".
The Data sheet contains a list of all of our customers and their customer IDs. The Include list sheet should contain the Customer ids which I want to keep in the Data sheet.
So what I have done is to loop through the Data sheet. If you are in the Include list sheet you should not be deleted fromt he Data sheet. If you are not then the row should be deleted.
I have actually done this and it works but the problem is it take a lot of time to run. I tested in earlier today and I had to break it after 20 minutes which is way too long for our users to wait.
This is the code I wrote:
Sub Include()
Dim FindString As String
Dim Rng As Range
Dim RowNr As String
Dim Lookup_x As String
Application.ScreenUpdating = False
[Code] ........
So my question is, is there any other way to speed this process up? The ScreenUpdating part I have tried but it didnt really speed it up as much.
I have a data dump. I download everyday with 200 rows and 20 columns. I need to remove any rows where there is no value in either columns C or D. Is there a quick way to do this?
View 7 Replies View RelatedI have a very large spreadsheet (>10,000 rows) of data. I did Conditional Formatting based on duplicate values for the serial numbers column (B) and then sorted to "Put Selected Cell Color on top". Next I did a sort by the Last Scan Date column M (Oldest to New). The date/time format appears as follows
I used the following macro to delete rows with duplicate serial numbers but retain the row that has the newest time stamp. When I run my macro it's doing the opposite where it deletes rows with the newest time stamp and retains the oldest time stamp.
Code:
Sub Test()
'for Macro to Delete Duplicate Rows and Retain Unique Value
Dim LR As Long
[Code].....
I'm trying to come up with a macro that can delete an entire column based on formatting of the cells. Basically what I have is a range of cells, and if all cells in a particular column have no fill color, then delete the entire column.
View 9 Replies View RelatedI am looking for some code that will use A,B,C as filters to find duplicate cells, and if duplicate found, there should be deleted the duplicated row (but not only the row from a,b,c column, but the whole 8 cells from that row - A,B,C,D,E,F,G,H).
As filter I would like to be used A,B,C columns.
EXAMPLE:
BEFORE
A B C D E F G H
Kristijan Markovski 26,2,1992 1389 Prilep Prilep Mice Kozar1 1
Kristijan Markovski 26,2,1992 1389 Prilep Prilep Mice Kozar01 1
Kristijan Markovski 26,2,1992 1389 Prilep Prilep Mice Kozar001 1
Bojan Smileski 5,2,1992 1356 Prilep Prilep Borka Taleski 1
AFTER
A B C D E F G H
Kristijan Markovski 26,2,1992 1389 Prilep Prilep Mice Kozar1 1
Bojan Smileski 5,2,1992 1356 Prilep Prilep Borka Taleski 1
I'm using Conditional Formatting for an entire column to check the value of each cell and compare it to the value of a cell in the same row but a different column. (Cell Value equals =$D2) It works great until I insert or delete a cell in the formatted column. The reference does not change as one would expect. I've played around with formulae such as =$D2<>$P2 but the reference only changes for the P2, not the D2. I've also tried using =CELL("contents", ADDRESS(Row(),4)) but this causes excel to complain.
View 3 Replies View RelatedI'm trying to get Excel to delete entire rows based on the conditional formating i'm using.
Basically, I want to get rid of all the rows that are of a certain color (let's say green, InteriorColor = 4). I've already come up with a way to delete rows based on color, but I have to take into account the Conditional formating i'm using.
Here's what I already have:
I run a match formula which returns the row numbers of items i need to delete - at the moment, when a match is found, it will say "Match found, delete row 4" for example. Since multiple matches, potentially into the hundreds could be found - is there a way that i could run a script to delete the rows automatically when a match is found? So instead of putting the above "match found, please delete row 4" into an adjacent cell, could we just delete row 4? & then move onto the next row where a match is found?
View 9 Replies View RelatedI need some assistance with the code below. I have a userform that has a listbox with 2 columns of information. When there is a match between the value in the listbox and the value in the cell for a given row, that row is deleted. I thought this was very straightforward, but i'm not getting this to work right...
Private Sub cmdDelete_Click()
Dim Val2 As String
Dim Val3 As String
Dim doit As Long
Dim roww As Long
Dim LastRow As Long
Val2 = ListBox1.List(ListBox1.ListIndex, 0)
Val3 = ListBox1.List(ListBox1.ListIndex, 1)
doit = MsgBox("Confirm that you want to delete the entry", vbOKCancel)
If doit = vbOK Then
I have a worksheet. Column A contains employee name, column B contains the date of the first day of the week's holidays they are booked for, i.e. 06/12/08 means they start their holiday for one week starting 06/12/08. That's probably really obvious, sorry.
Once a week I update the vacation list. I want to write a VBA code that looks at the date in Column B and deletes the entire row if it has occured. I'd like to use a value in C1 as the reference so if that cell has 06/15/08 in it then the code would delete every row where the date is prior to 06/15/08.
I have a worksheet ( adage inventory ) and I am trying to clean up some un-needed rows.
I need this deleting of rows based on a couple of variables.
I need to keep any row that Col F has the text "QCCONTROL"
and
I need to keep any row that COL N has the text "HOLD"
and
I need to keep any row that COL N has the text "REJECTED".
Sub Delete_OK_Lots()
lr = Sheets("adage inventory").Cells(Rows.Count, "A").End(xlUp).Row
For x = lr To 2 Step -1
If Sheets("adage inventory").Cells(x, "N") "HOLD" Or Sheets("adage inventory").Cells(x, "N") "REJECTED" Or Sheets("adage inventory").Cells(x, "F") "QCCONTROL" Then
Sheets("adage inventory").Rows(x).EntireRow.Delete
End If
Next x
End Sub
I have 11 names, one name in each cell, in one row. I want to be able to delete a row if there are more than 3 names in that row that have the same font colour, eg red. Would have to be a loop type macro to check all of the rows on the one worksheet.
View 9 Replies View RelatedI have a column that has different SIC codes in it (00045, 00046, etc). I would like to set up a macro or filter that would take cells in this column and delete each row that contains a certain code that I don't want.
Example, I want to delete all the rows with SIC codes that have 00345, 00873, 00145, etc in a particular cell. I would like a macro that would look at each cell in the column and delete the rows that I don't want.