I am working with about 50,000 rows of data and am trying to delete all of the rows where there is a zero in Column G. I tried to use an autofilter and copy the data to another worksheet but excel gives me an error message saying that it "cannot create or use the data range reference because it is too complex". If I use a loop to delete the rows, it takes upwards of ten minutes because of the amount of data.
View 2 Replies
I have some code which looks for the word "Out" in column "L" and hides the row if it finds it. This is running from row 24 to 160 and takes about a minute to run. I've tried two different solutions, neither really quicker than the other.
View 3 Replies View RelatedI have VBA code that attempts to delete an entire row from my worksheet:
Code:
Cells(3,1).Select
Selection.EntireRow.Delete
This works fine on small data sets, but on larger data sets it gives me the error message, "Excel cannot complete this task with available resources". This happens even when I try to do the deletion manually (without VBA code). Clearly, the code itself is not the problem.
My document has about 250,000 rows and 2,500 columns. While this is big, it is significantly smaller than Excel's documented limit of 1,048,576 rows and 16,384 columns.
I am using Excel 2007. My computer has 2GB of RAM but even when I try it on a computer which has 8GB of RAM it gives me the same error. If I "ClearContents" instead of "Delete" it works fine. For my purposes, however, deletion is entirely necessary.
I'm using Excel 2003. The sumif function will not allow me to ignore hidden rows in my data set that have been autofiltered. I tried using the following formula and it worked:
=SUMPRODUCT(SUBTOTAL(3,OFFSET(CopiedB!$I$2:$I$65000,ROW(CopiedB!$I$2:$I$65000)-ROW(CopiedB!$I$2),0,1)),--(CopiedB!$A$2:$A$65000=$A22),CopiedB!$I$2:$I$65000)
The problem I am having is that the sumproduct and offset funtions used to ignore hidden rows are considered "volatile" and force a recalculation. Moreover, I have this fomula pasted 100+ times and this dramatically slows things down even when I turn autocalculate off. Is there another way to accomplish a sumif with a user defined custom function in VB? I really need to have the ability to do a sumif that ignores hidden rows and is not dramatically slow.
However I have a subject at uni that requires me to create a series of regression models, histograms, correlation matrices etc.
For part of the assignment, i have to run 4 regressions (one for men & one for women) with dependent variable as average wages, and independent as bfast 1,2,3 and dinner 1,2,3 (all of which are dummy variables) (0 for male and 1 for female).
The second two regressions are exactly the same, except average wages must be transformed into log which i have already done.
I dont know how to differentiate the regression models into male and female (if possible). We must also include residuals and residual plots.
I keep getting an error that says non-numeric data, the other says input range must be a contiguous reference.
How do I delete filtered rows without deleting the hidden rows in excel 2010?
View 8 Replies View RelatedI have a macro which is copying data from several worksheets into one consolidation worksheet. When determining where to paste the data into the consolidation sheet, the macro includes some logic to find the last row that has data in it (using e.Range("A65536").End(xlUp).Row, where "e" is a variable holding the name of the consolidation worksheet).
Once all the data is on the consolidation worksheet, I have a second worksheet with formulas that link to the consolidation sheet. The issue I have is that the first step of my consolidation macro deletes all data on the consolidation sheet to ensure that no data is double-counted). I am deleting the data with logic that simply deletes all rows from 3 to 65536. Once these rows are deleted, Excel returns a #REF! error on my second worksheet which is linking back to this data.
Rather than deleting the rows on the consolidation sheet, I have tried using the Clear and/or ClearContents commands instead. This works (i.e., my formulas no longer error out), but results in the consolidation macro running very slowly (~15 minutes, compared to
The first code hides everything just fine based on the date in A1. When I change it to the second code to delete instead of hide it is leaving a bunch of rows that the 1st code hides. Both codes have the same search criteria.
Code:
For Each cell In Range("B8:B5000") If cell.Value Range("A1").Value Then cell.EntireRow.Hidden = True
Next cell
Code:
For Each cell In Range("B8:B5000") If cell.Value Range("A1").Value Then cell.EntireRow.Delete
Next cell
I have the following codes to delete all blank rows in column A
Dim lastrow As Long
lastrow = Sheet1.Range("A" & Rows.Count).End(xlUp).Row
MsgBox lastrow
With Sheet1
For t = 1 To lastrow
If Cells(t, 1) = "" Then
Rows(t).Delete
End If
Next t
End With
End Sub
Although it is working , it is not deleting all the blank rows at once, I have to keep pressing on the macro button running the macro several times, until all blank rows are completely deleted.
We have created a macro that basically looks for rows that contain an "H" and hides the row if it does.
Users can add new rows throughtout the year to this spreadsheet. and based on certain criteria, an H or U will be placed in a hidden column which the macro looks at and hides any row it finds an H.
The user has to click on the button that has the macro assigned to it once they have finished working on the spreadsheet.
The problem we're finding is that for users who insert/delete rows, once they click the button it takes up to 15 seconds to run through macro (which is ok). However, users who haven't added or deleted any rows and who click the button, they have to wait upto 5 minutes (which isn't ok) for the macro ro run.
We can't figure out why the macro takes longer to run when no changes have been made?
I got a code to delete all rows in the sheet which contain the word "DETAILS" but I now want to delete all the rows that do not contain the word "DETAILS"
My code if needed is:
Sub Find_details()
Dim rng As Range
Dim what As String
what = "DETAILS"
Do
Set rng = ActiveSheet.UsedRange.Find(what)
If rng Is Nothing Then
Exit Do
Else
Rows(rng.Row).Delete
End If
Loop
End Sub
How to highlight rows or data if data repeat in complete row.
View 3 Replies View RelatedSay I have a method that iterates through a bunch of Sheets. I check the name of every sheet, if it starts with "Data", I need to make everything between A4 and AZ500 empty (either by clearing cells or deleting rows doesn't matter how, as long as the result is an empty sheet below A4).
View 2 Replies View RelatedI have an excel spreadsheet that contains about 1000 rows and about 25 columns. The file contains employee information, name, id, cost center, department, title, FTE...etc. Column E contains the cost center which is a 7 digit number (i.e. 8001234). Within the 1000 rows of data there somewhere to 70 cost centers. I would like to delete all rows where a cost center does not match a list of 13 cost centers. I'm thinking I need some kind of array where I type in the 13 cost centers in the code, but I'm unsure of the syntax within VBA.
Also, the second step of the code I'm looking for is to delete all columns except for Column B, E, J and L. Those, by the way are Name, Cost Center, Job Title and FTE.
I want to delete all rows in the column of the ActiveCell when the ActiveCell.value < 0.01. Could you tell me why the code below doesn't work? It deletes the right rows but keeps looping without stopping
Sub DeleteZeros()
Dim Col As Long
Dim StopRow As Long
Col = ActiveCell.Column
StopRow = Cells(Rows.Count, Col).End(xlUp).Row
Range("A1").Select
[Code] .........
I have a macro that deletes rows. For some reason, the macro bombs out when the selection seems to be too big. Why is that?
deleterow_min = Sheets("Sheet1").Cells(1, 6)
deleterow_max = Sheets("Sheet1").Cells(1, 7)
Rows(deleterow_min & ":" & deleterow_max).Select
Selection.Delete Shift:=xlUp
In a part of my code I have something that will delete all hidden rows, like:
For Z = 1 To TotalRows - 1
If Cells(TotalRows - Z, 1).EntireRow.Hidden Then
Cells(TotalRows - Z, 1).EntireRow.Delete
End If
Next Z
I've done it in reverse to be quicker, but it's still quite slow. Granted, I am deleting several thousand rows, but surely there's a quicker way? Thinking about it logically I would presume that (in general) selecting stuff first in Excel and then deleting them appears to be quicker, but I'm not sure how to pull that off.
Here's my problem. I have the following table:
View 5 Replies View RelatedI have a large list of coordinates that I pasted from a website, and in Excel it has an emty row between every coordinate. I have about 2,000 cordinates, so ~4,000 rows. Is there a way to delete every other row besides manually?
View 1 Replies View RelatedI am having trouble with the .SpecialCells(xlCellTypeBlanks)
What I need to do is for a macro to first go through a range ("G8:G50"), Add a 0 value to any blank cell.
Then I want the macro to delete the entire row for any of the cells that have a value of 0 in that range of "G8:G50"
I have created a worksheet (through an import into MS Excel 2007) which contains 287,281 rows. However, the data I need is located in rows: 4, 67, 130, ... (or n+63) rows.
View 10 Replies View RelatedI want to delete every second row, because I have data with 0.25m interval and I want 0.5m interval. Why I try the following it doesn't work?
View 2 Replies View RelatedLoop for Deleting Rows
Whats wrong with my code ?
I would like to delete rows that are based on these conditions: First ,Do a loop from row 2 to last available row. - Delete rows with same column(column B) that has the same value. However I want the last available row with the same ID to remain.
- Delete Rows with any values in found in other sheet column B. When the value taken from the first sheet(ABC) is compared to the column B in second sheet(DEF), if they are equal, the row will be deleted in the second sheet and the rows in first sheet will main. I had attached an simple example with the 2 sheets. The Result are shown in the example.
I need some VBA to delete rows that are under the value of 10 in column H and keep the rest, is there a way of doing this
View 7 Replies View RelatedIn my Excel 2003 worksheet I need a macro to search column B for duplicate entries. The data in column B is both numeric and string. If there are any duplicate entries, then I need the duplicate rows to be deleted.
View 4 Replies View RelatedI have data in the format below. I'm looking for a piece of code that will look down column B and if there are 30 rows in which all the values are zero then delete all rows from row 1 to the last row of those 30 rows.
Input_data AB106/01/2012 13:03:170206/01/2012 13:03:1816306/01/2012 13:03:1916406/01/2012 13:03:2016506/01/2012 13:03:2117606/01/2012 13:03:2224706/01/2012 13:03:2316806/01/2012 13:03:240906/01/2012 13:03:259.51006/01/2012 13:03:26191106/01/2012 13:03:27211206/01/2012 13:03:28161306/01/2012 13:03:2981406/01/2012 13:03:3001506/01/2012 13:03:31571606/01/2012 13:03:32801706/01/2012 13:03:331091806/01/2012 13:03:341331906/01/2012 13:03:35156
way to delete multiple rows in a large spreadsheet with automation Example:
84076 Cantor 10 Retail Tue Nov 08, 2011 160 REVISED Division 8 1600 Compulsion Done 84077 Cantor 10 Retail Thu Nov 17, 2011 160 CANCELLED Division 8 1600 Compulsion Done 84078 Cantor 10 Retail Thu Oct 13, 2011 88 Division 8 880 Compulsion Done
I would need to delete all 4 rows within the "Cancelled" Box, but in a spreadsheet of 12000 boxes of 4. so, probably a macro to find them all, and delete them would be the way to go.
I'm looking for a macro that will delete a row with a certain value (0.00) and the row below it.
View 9 Replies View RelatedIn my spreadsheet, column A can contain the same word over several rows. If column B is blank at any time - I want to delete all rows that have the same word in column A.
Apple 1
Orange 2
Apple
Peach 1
Peach 2
So in this example - I want to delete rows 1 and 3 that show the word Apple.
