Description Outputs And Inputs Cells In Workbook
Feb 1, 2014
I have a small problem here with my worksheet. In my college i need to make a project about sales in a wooden floor shop.
I have done one part of work but actually i'm stuck at the specifications of my sheets.
What I need to do i added the screenshot with design Screenshot 2014-02-02 01.29.03.png
For my project i need to describe everything in my workbook as you can see in screenshot, i have made some notes but i'm note sure if its really right my teacher don't want or can't explain me well this part of work, i don't know why...
Now the question> i would ask some nice people if they can check my sheets and show me where i need to put inputs and outputs notes in the design sheet. Also in the screenshot I surrounded a part with red line there is a very strange thing no one know what is it 3 teacher telling different things.
View 1 Replies
ADVERTISEMENT
Jun 2, 2008
I am looking to create an excel search with two input and three output values on Sheet 1 that will link to a table on Sheet 2. To help illustrate:
Sheet 1:
The two white cells indicate the two input values, and the three blue cells indicate the three desired output values.
Sheet 2:
I want to enter the two input values (Length and Width), press the "Search" button, and have the corresponding output values (DWG#, Item #, and Tooling #) from Sheet 2 appear in the three output cells on Sheet 1.
View 9 Replies
View Related
Sep 11, 2012
I'm trying to take 5 inputs that are all in text format and inputs have fixed options what i need is a macro that will take them and turn them in to the relevant outputs. there is a select amount of combinations and i've been asked to do each combination as a separate macro or sub macro.
What I have so far is;
If C6 = "Panel plate" And D6 = "24 by 21" And E6 = "<1.59" And F6 = "N/A " Then I6 = "120" And j6 = "4" And L6 = "120"
End Sub
A B C D E F G H I J K L
1
2
4
5
6 Panel plate 24 by 21 <1.59 N/A
7
8
9
10
(Doesn't seem to work)...
If those four cell match up then i need I6-L6 to line up with whats required.
If they don't equal that i need it to stay clear.
I also need to add the same macro with different options.
View 7 Replies
View Related
Feb 12, 2009
I'm having a mental block with what should be some reasonably simple nested logic. Basically I've got 3 possible inputs in one field and 2 in another, and want to get 6 possible results out the other end. The sheet attached shows what i'm putting in (columns A and B) and what i'd like to get out the other end (C). The formula i need in column C is a bunch of AND's that i somehow keep getting wrong
View 5 Replies
View Related
Feb 14, 2014
How can excel find the least amount of inputs needed to produce a specified amount of outputs? To boil it down to the basics:
Need=
100 units of x
200 units of y
From a combination of=
item A that yields 25 units of x and 5 units of y
item B that yields 10 units of x and 15 units of y
Objective = minimize the number of items A & B used (i.e. minimum of (item A)*(item B))
View 7 Replies
View Related
Apr 16, 2009
Is there a way where i can have the figures in Red align with the corresponding description.
As it is when i run my report the account code will come on top of the description and i want to find a way to align them in the yellow cells.
View 6 Replies
View Related
Sep 11, 2007
Is there a way to capture ALL the description in Column D whenever I change the code? This mean if I change the code to 546CC0004, the description will change
Currently I copy manual from this file to another file. I Have more than 100 code with different Description. a Sample is enclosed.
View 4 Replies
View Related
Jan 20, 2010
I'm trying to automate the solver using a vb program. I have found this example which is just about spot on for my needs:
View 4 Replies
View Related
Jul 1, 2009
Trying to create a dynamic costing spreadsheet, where the user has to make multiple selections from many dropdown lists, all of which end up showing a total cost.
So far I have managed to create relatively dynamic lists, so that the choice in one cell will dictate what options are available in the next.
But if a user selects an options form all the dropdowns, and then decides to go back and modify a previous option to something else, the effected dropdown lists do not change until you click on the drop down arrow again and see the options available have changed.
Let me try and simplify...
'Menu 1' has two option: 'A' and 'B'.
If 'A' is chosen, then the next menu, 'Menu 2', will have options '1' and '2'.
If 'B' is chosen from 'Menu 1', then the options in 'Menu 2' will be '3' and '4'.
Lets say the user chose 'A' from 'Menu 1' and then '1' from 'Menu 2'... AND THEN went back and changed their choice in 'Menu 1' to 'B'....
'Menu 2' will still be displaying '1', even though the options are only '3' and '4'.
Can I make the dependant menu's either reset or blank or highlight to show that a change made somewhere else has made them currently invalid
View 10 Replies
View Related
Jun 20, 2014
I have a calendar set up with dates going along P6:CU6. Column C9:C27 has various status' for the job such as "Complete" or "In Progress" etc. Next to that in rows D and E I have start and end dates for the job. What I am trying to do is change the fill colour of the empty cells that are in line with each job, so that between the correct dates they are the corresponding colour to the status. So a complete job on row 9 that started on 26/05/14 and finished on 28/05/14 would have three green cells along Q9, R9, and S9.
I have tried an IF/AND/OR statement which looks like this:
=IF(AND(Q6>=D9,Q6<=E9),OR(IF(C9="Planned","P",""),IF(C9="In Progress","IP",""),IF(C9="Late","L",""),IF(C9="Complete","C","")),"")
I am getting a #VALUE! data type error, I have tried reformatting the cells to various date formats but no luck so far. This could be because my dates are set up as =P6+1 etc. but I am not sure. The error only occurs when the cell falls within the dates, otherwise it remains blank.
I intend to hide the value in the cell and use conditional formatting to change the cell colour based on the hidden input.
Once this is working I also need to take weekends into account, column G has any 2 value combination of Y and N to say whether the employee is working Saturday, Sunday or both. Row 7 has a "1" value underneath every Saturday and a "2" underneath every Sunday. I can imagine how this would work but combining it with the above formula could be complicated.
View 1 Replies
View Related
Jan 28, 2014
I have a cell in sheet1 (say, B2) in which I can key a date. Once I change that date, cell C10 updates (after I hit F9 to recalculate) with a new number based on the new date.
I have a list of dates on another sheet, from 1/1/2009 to 12/31/2013, all in column B. I want to produce VBA code that will run through each day, 1/1/2009 to 12/31/2009, in sheet1 cell B2 and take the output in C10 and place it next to each day in column B until it reaches the end (12/31/2013). I know this is possible but for some reason am having trouble coming up with the right looping mechanism.
You can imagine if I had to manually key in each day to get the desired output how tedious that would be.
View 3 Replies
View Related
Apr 22, 2006
I've attached part of the file I'm working with, and can't figure out how to align the text to the top in the merged cells titled description. How do I format the cell so that if there isn't two lines of type in the description it remains aligned with the quantity and price
View 2 Replies
View Related
Jul 5, 2009
The issue: Theres about 300 rows of data arranged in multiple columns. One column has a dollar amount and another column has a code. Data gets entered into the sheet periodically so every new dollar amount needs to be transferred to another sheet by recognizing the right code.
What I want to do: I want excel to recognize the dollar amount and attribute it to the code in the same row. Then sum and transfer that amount to another sheet and if possible add it to an existing amount the in the correct cell.
The final outcome should be that any user of the document can just copy and paste data into one sheet and the document automatically generates the costs in another sheet. And if possible every dollar amount should be linked to a code so a user can just click on the amount and see where it came from and under what code it falls under.
View 5 Replies
View Related
Feb 14, 2007
I need a formula to create random letters down a column: A-F. Probability of A=3%, B=6%, C=8%, D=11%, E=14%, F=16%. I've got it worked out to where each letter is a header of a column ("A" is in A1, "B" is in B1, etc.). My question is: how do I consolidate that in one column, so that, "A" for example, reads ABFCBACFBFBECEABCEABCEAFBCEFBCAFEBCFAEBFC...? I'm using the random number generator for the 6 columns...thx
View 5 Replies
View Related
Apr 8, 2014
I need to multiply the result of the 3 if statements as shown below in one cell Each of these 3 if statements output an integer and I need to multiply the value of each of these 3 output integers to get the final output integer. syntax of multiplying if statements outputting an integer?
IF(ISNUMBER(SEARCH("Gold",B20)),C11,IF(ISNUMBER(SEARCH("Silver",B20)),B11,
IF(ISNUMBER(SEARCH("Platinum",B20)),D11,IF(ISNUMBER(SEARCH("Customized",B20)),E11))))
IF(ISNUMBER(SEARCH("Gold",B20)),C2,IF(ISNUMBER(SEARCH("Silver",B20)),B2,
IF(ISNUMBER(SEARCH("Platinum",B20)),D2,IF(ISNUMBER(SEARCH("Custom",B20)),E2))))
IF(ISNUMBER(SEARCH("Gold",B20)),C12,IF(ISNUMBER(SEARCH("Silver",B20)),B12,
IF(ISNUMBER(SEARCH("Platinum",B20)))),)),D12,IF(ISNUMBER(SEARCH("Customized",B20)),E12))))
View 4 Replies
View Related
Feb 4, 2014
On one of the reports which i am doing to identify the series of values for a single input data. In the attached spreadsheet there are 2 tables, table 1 has complete data with column a is the lookup value and column b is output value
I have to fill the table 2 in the same manner as shown in the attached template. there could be many different for a single lookup value but i am targeting to look for the 1st 9 matches and last matched value. eg. if i am looking for the value 9 which has 15 different values i want to display the 1st 9 matches (p,q,r,s,t,u,v,w,x and ad - being the 15th match)
Not sure whether this could be possible by using formulas?
View 5 Replies
View Related
Nov 2, 2012
I have a userform with 5 data fields. The first two are listboxes and the last 3 are textboxes. I have recently added the multiselect option to ONLY THE FIRST listbox (MeetingSpaceBox). I can get the multiselect listbox to output correctly. The problem is, though, that the rest of the data will only fill in the first row and will not be added to any of the subsequent rows. The data from the other 4 fields should remain constant for each selection in the first ListBox or at least until either "ok" or "clear" have been selected on the UserForm.
Do I assign all those valuables to variables and fill them in after the Multiselect listbox data has been added? I assume this will mean a change (or deletion) of the emptyRow code.
See my code below
VB:
Private Sub CalcButton_Click()
If AllDataEntered Then
'define empty row
emptyRow1 = WorksheetFunction.CountA(Range("A:A")) + 1
[Code] .....
View 4 Replies
View Related
Feb 12, 2009
I am in a fix on how to create a formula where the user can drive the outputs by selecting specific timeframe (placeholder Cell add: C3 on worksheet named Staff Number Calculation).
Based on this selection, the output should be calculated in address C9:H25, now where I am getting stuck is referencing as this output is based on values present in worksheet named "Volumes" and "Time Spent Per Unit".
However, as volumes vary by each month, the number od workers required should also be reflective of changing in volumes worked upon.
For example: ...
View 14 Replies
View Related
Feb 12, 2013
I have a question around making a summary table from a model. I will try to explain this as plainly as possible.
I have a model where you can toggle 3 different inputs across two variables. The final output number of the model will vary accordingly.
I would like to create a 3X3 table with the final output for each combination of variables. Is there a way of doing this using formulas or would I need a macro?
View 2 Replies
View Related
Jun 23, 2014
I am working on a complicated macro. The macro is suppose to move certain data set to a specific worksheet if an if statement is "True."
As of now the macro, inserts the row into a new sheet but it is inserted into Row 1. My data set is in Sheet A is up to Column U and I want it to be inserted in Column B on Sheet B. The code below inserts the entire row into Sheet B starting with column a.
[Code] ........
This variation of the code moves the entire data set from Sheet A to Sheet B and inserts it in Column B as wanted, but it does NOT follow the Criteria of "true", it brings the entire data set even those with "False".
[Code] ..........
View 1 Replies
View Related
May 7, 2007
I have a textbox on a userform.
The textbox is populated with a number which is generated by a formula which is
the result of a "Select Case" module.
On some occasions, for instance when dividing 1000 by 3, I get a result with recurring decimals in this case 33.333333333.
Is it possible to make the "result" round to the nearest whole number?
The textbox is named "inDorW".
View 8 Replies
View Related
Dec 21, 2007
My goal is to match two outputs from a database so that the same person's record can be found on one row. At present output 2 does not marry up to output 1 due to staff leaving and new appointments being made. The data in output 1 should remain static. The data in output 2 must be manipulated to match the order of output 1.
Output 1 is a 5 column record containing (in A6:E6)
Forename, Surname, Branch, Roll Number, and a % score
Output 2 is again a 5 column record containing (in G6:K6)
Forename, Surname, Branch, Roll Number, and a % score
Each employee can be identified by a unique Roll Number Code contained in the fourth column of each record.
If an ideal match has been found I'd like the letter Y to be inserted in the L column of each record to signify a positive comparison. All non matches should have the letter N in the L column & these non matches should be placed at the bottom of the dataset.
View 2 Replies
View Related
Jul 10, 2014
Assuming I have three worksheets:
1) input: col A has a series of product code (string)
2) calculation: where I want to automatically copy and paste each product code from "input" worksheet into "calculation" cell B4, and through many steps of calculations, return the outputs in cell B8 and B9 (parameters are numeric)
3) output: how to automatically record B8 and B9 from "calculation" sheet to this sheet Row 5 and 6 from each loop? (format of output doesn't really matters)
View 4 Replies
View Related
Feb 10, 2007
The weather data I receive from a web query pulls data in oddly. For example, some days it pulls the weather for today into cell A1, and the forecasts for the following 3 days are in A4, A9, then A19. The cells in between are blank, and the problem is that it pulls it in randomly otherwise I could just have the cells reference it (ex. some days it pulls it into A2, A8, etc) What I need to do is arrange it, in order, without the blank rows, but I want to do this without deleting the rows.
View 4 Replies
View Related
Jan 31, 2009
Example: Table ...
View 9 Replies
View Related
Jun 17, 2014
Attached is a file containing stock codes and description. The stock code is repeated but i would like to have one line description per stock code.
View 4 Replies
View Related
Mar 13, 2009
I have a column with a description that includes color in the description, I want to sort by color with breaking up the description, is there a formula that will look at the description such as "Am Cannoe black tecan" and in the cel next to it come back with "black". Then I would be able to sort by color column, otherwise I would have to text to column and break up the description, etc,,, ect....
So column a1 has the description, I want a formula that will put in column b1 "black" I have 3 colors, so I can do one at a time or add to same formula.....
View 6 Replies
View Related
May 14, 2009
I am looking for a way to use the sum.if formula, combined with the find.spec (I am not sure if this is the correct formule, at the moment I only have the Dutch Excel version, it is meant to find a word as part of a cell)
The part I am struggling with is how to find the correct cells to "sum" when the criterium is part of the cell contents. e.g. Paul is the description in am looking for in "Paul is riding his bike" If so, then add the turnover to Paul. I have made a demo to clarify what I mean.
View 4 Replies
View Related
Dec 9, 2009
I need help to split text (shown below) into 3 columns, now all text is in one cell.
e.g.,
HIPP 1 PLUS PROBIOTIK 600 G MILCHNAHRUNG PULVER 1607000286
I have over 30,000 rows of data which contains different number of spaces within a cell. Please see attached file.
View 14 Replies
View Related
Jul 29, 2009
I have created a pull down menu but cannot figure out how to add descriptions with them. The items in the pull down menu are codes instaed of making people look up their definition in a printed out table,I am hoping to figure out how to make it so that as people scroll through the pull down menu a corresponding definition for the "code" listed appears.
View 9 Replies
View Related