Is there a way to capture ALL the description in Column D whenever I change the code? This mean if I change the code to 546CC0004, the description will change
Currently I copy manual from this file to another file. I Have more than 100 code with different Description. a Sample is enclosed.
I've attached part of the file I'm working with, and can't figure out how to align the text to the top in the merged cells titled description. How do I format the cell so that if there isn't two lines of type in the description it remains aligned with the quantity and price
View 2 Replies View RelatedI would like to have a macro to automatically generate a statistics table (on the "statistics" tab) with the 5 following fields:
Fragment names / # samples / # of failed samples / % of success / # of variations in the fragment (SNP). At the bottom of this table, I would like to have a cell with the average % of success for all fragments. The data to generate these statistics are on the "gene name" tab (please note that this name will change every time I will work on a new gene). To make things easier, I think the macro should be run from this tab.
1. The Fragment names are displayed in row #5. I use one column per variation per fragment. If one fragment has 3 variations, there will be three columns and I will merge together the fragment name cells. The fact that some cells are merged can be a problem when copy-paste to the stats table (as I would like to get rid of the merging).
2. # of samples corresponds to the number of cells in blue in column A. The number of samples can change from one report to another but is always constant in the same report.
3. # of failed sequences. In the table, I type "Failed Sequence" (if the analysis has failed) and "Missing Sequence" (if the analysis has not been done). When a sample is failed or missing, it is for the who fragment, no matter how many variation there is in the fragment, so I usually merge the cells of all variations for this failed sample.
4. % of success: this is quite easy #sample/#of failed+missing sequence for this fragment
5. # of variation is equal to the number of variations for this fragment (can be 0, 1, 2, etc.). When there is no variation in a fragment, I put '-- in all cells of the corresponding fragment on the "gene name" tab. Fragment 3 on my file is an example of 0 variation.
I'm looking to look up sheet name based on a date, then look the date up within that sheet which is a merged cell, then return the figure in the corresponding cell.
I have a sample worksheet to attach, just have to work out how to do it.!
In the sheet "Cashflow Summary" in cell E24, i want to lookup the sheet name based on the value in C22 (merged cell), then lookup the date in that sheet (6 August 2014), and return the value in cell y8.
The difficulty is with firstly the merged cells, but also performing the lookup over a number of different arrays, as the sheets for each month, have the months listed under each other in rows of 5 days at a time.
I'm working on doing some data analysis on an excel workbook that comes from a tracking website's reporting system. The data is inconsistently merging some cells in rows where there are multiple entries in a column, and on other cases is not merging those cells.
The format of the spreadsheet is as follows:
A
B
C
1
Account #
Current Services
Order Status
2
1234
PACK1
Completed
[Code] ....
In this example, cells A3:A5 have been merged by the reporting system's export function, but B3:B5 were exported as individual cells. On the other hand, cells A6:A12 are not merged into a single cell.
My goal is to look at the values in column B for each account and compare them to an array of service package codes and to see if any values in B match value in that array for each account number. If the system of cell merging was being consistently applied across all cells, I could figure out a way to link the results for each group of cells in column B to the account number they match up to, but since there are some account numbers that are in unmerged cells, I'm not sure what to do.
I can't alter the way the reporting system exports its data to Excel format, so how to deal with a mixture of merged and unmerged cells in column A. How I could do this without a lot of manual adjustments?
I have a column with a description that includes color in the description, I want to sort by color with breaking up the description, is there a formula that will look at the description such as "Am Cannoe black tecan" and in the cel next to it come back with "black". Then I would be able to sort by color column, otherwise I would have to text to column and break up the description, etc,,, ect....
So column a1 has the description, I want a formula that will put in column b1 "black" I have 3 colors, so I can do one at a time or add to same formula.....
I often use pivot tables to summarize accounting data. I wish to summarize the data by account number, but also wish to display the account description next to each account number. Both the account number and account description are separate columns in my original table of data.
I've always managed to do this by the use of lookup formulas after the formation of the pivot table in a column outside the pivot table, but it would be preferable to have those descriptions as part of the table.
If I designate both the account number and account description as row labels, they land on two different lines.
I cant figure out how to do this, see attached example
I want to use a drop down list on sheet 1 to select a cell from column 1 on sheet 2 and fill in cell e1 with data from column 1 and 3 on sheet 2?
I'm trying to find out how I get a cell to automatically find a code based on the selection of a drop down menu. If drop down menu selction is Rent I want the cell to automatically find the code for rent 61100. It's a large selection that will grow alot bigger than it currently is so needs to also have growing room.? I can't seem to find any answers on here already that seem to work on this, (or understanding them is maybe my fault). I've attached the sheet
View 3 Replies View RelatedI'm trying to make a budget type spreadsheet for a club I run. I have a popup box where I click what was purchased, and now I want a drop down list of all the members of the club so that when I choose one name it is inputed beside what was purchased (I hope this makes sense !). I've managed to make a dropdown list in a dialog box but I don't know how to make it so that the name I choose is inputted into the spreadsheet.
View 2 Replies View RelatedI was wondering if there was a way to create a pop-up list to appear when a user selects a certain cell that would provide the user with a list of (in this particular case) inventory items. The user would select which items they require for the task at hand and the total $$cost of the items would appear in the cell once is is deselected.
View 4 Replies View RelatedScenario: I have 5 different tables, all having the same headers. The values under are Vlookups.
Objective: Create a dropbox that lists (Table 1, Table 2, etc.) For whichever table is picked, is the one that will show.
For example, if I want table 1 to populate, I would chose table one in the drop box and so on for the rest of the other tables.
I have a small problem here with my worksheet. In my college i need to make a project about sales in a wooden floor shop.
I have done one part of work but actually i'm stuck at the specifications of my sheets.
What I need to do i added the screenshot with design Screenshot 2014-02-02 01.29.03.png
For my project i need to describe everything in my workbook as you can see in screenshot, i have made some notes but i'm note sure if its really right my teacher don't want or can't explain me well this part of work, i don't know why...
Now the question> i would ask some nice people if they can check my sheets and show me where i need to put inputs and outputs notes in the design sheet. Also in the screenshot I surrounded a part with red line there is a very strange thing no one know what is it 3 teacher telling different things.
Is there a way where i can have the figures in Red align with the corresponding description.
As it is when i run my report the account code will come on top of the description and i want to find a way to align them in the yellow cells.
I have a 1000x1000 cell grid on one of the worksheets in my workbook where each cell contains one of the following four possibilities:
1) Blank
2) A string that is not defined in a lookup table (*lookup table = a named range on a different sheet)
3) A string that exactly matches an item in the lookup table
4) A long string that contains an item in the lookup table (which can be found with a FIND function, for example)
I would like to apply conditional formatting to my 1000x1000 grid, to color each cell according to the lookup table, where the last column has the name of a color that I can match with my conditional formatting setup.
I have solved everything except for No. 4).
2) is taken care of by using "Format only cells that contain" with "No Blanks"
My solution for 3) - using "Use a Formula to Determine Which Cells to Format" - uses
=VLOOKUP(A1,lookup_table,2,FALSE)="fill color name" So, for every different color I want to use, I have a different Formatting Rule in the Conditional Formatting dialog.
But 4) is tricky, because VLOOKUP can only return the result for a specific cell value.
If my cell contains France;Germany;Italy, I'd like the color to be according to what I set for "France" in my lookup table. Or, if my cell contains Germany;France;Italy, I'd like it to be set based on what I decided Germany is in the lookup table (i.e. "blue").
You can notice that one thing that is consistent is that I separate my "sub-strings" that are contained in the lookup table with a semi-colon.
So, one way might be to see if FIND finds a semi-colon, and then grab the string that goes before that character position.
I wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU()
'
' CopyICUCAPU Macro
'
Dim i As Integer
[Code].....
I am looking for a code that will clear all of my unlocked cell in sheet 1. That is not a problem but since many of the cells are merged I know it keeps throwing me an error saying cannot change contents of merged cells or something like that. Does anyone know how to get around this without unmerging the cells. I saw a code to unmerge all of the cells on a sheet but I really don't want to do this as I already have worked around most of my problems with the merged cells.
View 14 Replies View RelatedI am trying to perform a lookup (vlookup) function in a cell in excel and wish to have the range as a variable, so that I can adjust which column the lookup function refers to.
View 4 Replies View RelatedI am trying to use lookup to return the value when the condition of two cells are met.....
View 10 Replies View RelatedI have a spradsheet that I've formatted using merged cells. The spreadsheet has several columns. Into these columns I must enter raw data extracted from our SAP data base. The extraction worksheet has no merged cells. So bottom line, I have a column of say, 30 non-merged cells and I want to paste that column into my formatted spreadsheet that has 30 merged cells of thre cells a piece (90 cells total).
So far I have been unable to do this. If I've attached it correctly, the sample attached
MERGE EXAMPLE.xls‎
Im having problems trying to sort through data and linking certain data. I will post example below:
Main 1
Main 2
Main
3
Sublevel 1-4
[Code]....
This is just one part of a row of the workbook but shows the Main data which is made up of 4 different sub levels on the right. I merged 4 cells for the main data so that all the cells lined up but I'm still having problems with being able to sort and link the files together so that when I filter, they all do it together. The example didn't paste well.
i have a problem to sort merged cells in the file attached. i tried via macro but could not reached a good solution. I have 30 plans inside the sheet and even manually is too hard to do it because i use some "=" to not type again every number since some are the same but when i try to sort the lines became diferent values.
View 10 Replies View RelatedI now see why alot of you dont like merged cell's. What i am trying to do is Cut and paste a range that contains merged cells. A kit can be created using the Button on the sheet. The cells in column G are merged down to the last kit item. On Row A of the kit the 1st cell contains data validation once the Delete kit cell is re-entered it removes the selected kit from the sheet. Then will select all kits below the (now deleated one) and cut the range, and paste it to where the old kit was located.
When the kit's are pasted into the new location there are issues with the merged cells in column G. Is there a way to fix this issue, or know of another approach to keeping the same layout.
I have merged cell C2:C9. When I insert formula =C5, it returns 0. How do I make it to return the actual value?
View 11 Replies View RelatedI have exported a report to Excel from a BI tool called ZAP.
Unfortunately the cells in the columns are merged by group eg. salesperson, product, country.
I need to be able to filter by each of the columns - the only way i can think of is to unmerge and copy the information to the rest of the "merge area".
This will be extremely time consuming as there are more than 1000 rows and at least 5 columns that I want to filter.
Sales PersonCountryCustomer NameProduct Model DetailJohn WUNITED KINGDOMAPCBasicPremiumStandardStAPLAccessoriesAcrylic FsPremiumFsStStyAPOAccessoriesPremiumStandardStAPMFsPremiumStandardSt
I have a spreadsheet that has merged cells on that is typed into.
I have a Macro that pulls the information into another sheet and then it tries to clear the cells for the next person to fill in. The issue I am having is that i cant clear the merged cell. I have tried the following code
Code:
Sheets("Coach").Select
Cells(18, 2) = ""
Range(Cells(18, 2), Cells(26, 11)).ClearContents
Sheets("Coach").Cells(18, 2).ClearContents
I have a table where sometimes cells are merged. To the right they are not merged, but I need to link to the value of the merged cell. How can I do it if I don't want to do it manually?
Example:
Say A1:A4 is merged, A5 is just normal. I want a formula using those values, say in B1:B5. Now just filling down the formula would reference A1, A2 and so forth. This is wrong.
when i try to link a merged cell to retrieve result, i get cell ref for both cells, i only like to see B7 not B7:E7.
Summary C708 Spreadsheet FormulasCellFormulaC7='Abode Homewares Pty Ltd'!B7:E7 Excel tables to the web >> Excel Jeanie HTML 4
I have a workbook in Excel 2007 where I am creating a summation worksheet through the use of arrays which sumif and countif the other worksheets. Things went fine until about halfway through when I started getting merged cell errors. In between the calculations, I had some merged cell rows for section titles. I was not entering the array into them, but researched the error and unprotected the cells. Problem solved. Now, with 10 row to go, I started getting the error again. I unmerged the sectional title rows. I verified that the cells are not protected. However, when I ctrl+shift+enter to input the array, my formula is moving from the cell that I am inputting to, to the cell in the row directly beneath it.
View 3 Replies View RelatedI need to compare cells in two worksheets but with a difference ex:
Worksheet 1 contains merged/single Cells
Worksheet 2 contains single Cells
Now , i fneed to compare first merged/single cell in Worksheet1 with first single cell in Worksheet2 and similarly , second merged/single cell in Worksheet1 will be compared with second single cell in Worksheet2 and so on.........
Though i can use exact and compare them maually by specifying cells but since i need to make it general , suppose second time there can be some other combination of Merged cells I need to compare with Worksheet2 .