Multiselect Listbox Output And Other Userform Outputs
Nov 2, 2012
I have a userform with 5 data fields. The first two are listboxes and the last 3 are textboxes. I have recently added the multiselect option to ONLY THE FIRST listbox (MeetingSpaceBox). I can get the multiselect listbox to output correctly. The problem is, though, that the rest of the data will only fill in the first row and will not be added to any of the subsequent rows. The data from the other 4 fields should remain constant for each selection in the first ListBox or at least until either "ok" or "clear" have been selected on the UserForm.
Do I assign all those valuables to variables and fill them in after the Multiselect listbox data has been added? I assume this will mean a change (or deletion) of the emptyRow code.
See my code below
VB:
Private Sub CalcButton_Click()
If AllDataEntered Then
'define empty row
emptyRow1 = WorksheetFunction.CountA(Range("A:A")) + 1
I'm trying to return the selected items from a listbox to a range within a Worksheet when the user press the >> button as shown below. The point is i can't return ALL the selected items but only the first picked by the user.
Here is the code i'm using when button >> is pressed:
Code: Private Sub Inserir_Atributos_na_Analise_Click() Dim i As Long Set ws1 = Worksheets("ListBox")
On a multiselect listbox, is there any way the user can select a "block" of selections, instead of having to select them one by one? The list box I have has about 100 choices and it would be possible to select blocks of choices at a time. This is similiar to MS Outlook email where you can push the shift key to isolate a block of emails to move to a different folder.
I have a multiselect list box in a userform and need to transfer all the selected items in the list to Sheet2 Column D starting in the first empty cell.
I am using the following
Private Sub CommandButton1_Click()
Dim iListCount As Integer Dim iRow As Integer Dim rStartCell As Range
Set rStartCell = Sheet2.Range("D65536").End(xlUp).Offset(1, 0)
For iListCount = 0 To ListBox1.ListCount - 1 If ListBox1.Selected(iListCount) = True Then ListBox1.Selected(iListCount) = False iRow = iRow + 1 rStartCell.Cells(iRow, 1).Value = _ ListBox1.List(iListCount, 0) End If Next iListCount Set rStartCell = Nothing
End Sub
My problem is that this is transfering just the first selected item from the listbox to the first empty cell in Sheet2 column D but the rest of the selections are not transfered.
I have a MultiSelect Listbox with two columns of data and I want to enter the listbox row data into different cells of a sheet. For example, the selected listbox first column data to be entered to Sheet1, activecell and rows below (for other multiple selections), and the selected listbox second column data to be entered to Sheet1, activecell(0, 2) and rows below (for multiple selections).
I've finally gotten the code down to drag an item from one list box and drop it into another listbox, but only for one item at a time. The list boxes are on a user form and I am using Excel 2002.
how to select multiple items in ListBox1, drag them to and drop them into ListBox2?
I have a listbox control on a User Form. The properties are set as follows: MultiSelect: 1-fmMultiSelectMulti; ListStyle: 1-fmListStyleOption. With these properties the user selects multiple items from the listbox by clicking checkboxes that appear to the left of each option. Once items are selected the user clicks a command button on the User Form and the selected items are placed in a single cell on an excel worksheet. The excel worksheet contains an excel list of records. The records on the worksheet can be edited or added.
Let’s focus only on the MultiSelect listbox. A single item is selected from the listbox and is applied to cell G2 as CRUSHING. On the next record two options were selected. These items were added to cell G3 as CRUSHING; SHEAR. The next record had three items added to cell G4 as SHEAR; LATERAL BENDING; FLEXION. As you can see from the above example multiple items are added with the item name followed by a semicolon space and then the next item name. The user form contains command Buttons that allow the user to move to the NEXT, PREV, FIRST, LAST, ADD, and EDIT records.
Here is my problem: I can check multiple items and have them added to a single cell of the current record on the worksheet. My problem is how to reverse this process. I need to move back to a previous record and have the User Form appear with the check boxes of the currently selected record.
I have created a user form with a multiselect listbox. The user form displays a checkbox to the left of each ListBox item that can be selected. Once selected the user clicks the SAVE button on the user form and the results are stored in a single cell on an excel workbook. The user form contains several other buttons that allow the user to view the NEXT and PREV records stored on the excel worksheet. If a checkmark is placed next to the option Shear and the Save button clicked, the word Shear would be recorded in the 7th column, current row of the worksheet. If the user checks several boxes like: Flexion and Lateral Bending, the 7th column of that row would store Flexion; Lateral Bending. The macro inserts a semicolon space between multiple selected items.
When the user clicks the PREV or NEXT button on the user form to go an existing record I am having difficulty getting the correct checkboxes to be selected to reflect the contents of the 7th column, current row. The ListBox control is named GeneralInjuryMechanisms. The code that I currently have for this section of the macro is as follows:
Dim strInput As String, strOutput As String Dim varZz As Varient, i As Integer GeneralInjuryMechanisms.Clear 'Clear the existing ListBox options AddRegionalMechanisms 'Recreate ListBox options based on current record in column 7 strInput = Cells(r, 7).Value ' i.e. cell on worksheet with Flexion; Lateral Bending varZz = Split(strInput, "; ") 'create array of values using "; " as delimiter. For i = LBound(varZz) To UBound(varZz) ' loop through values...................
I've been trying (unsuccessfully) to return a value from the second column in a 4 column listbox, all I can manage to return is the numerical value for the row selected eg if I use: MsgBox listbox1.Value to try and return the result, it shows the number of the selected row in the msgbox.
i have this code to populate the worksheet from listbox selections, but it only works on a 'one at a time' basis.
Private sub cb1_click() Dim i As Integer Dim Ltm As String
With ListBox1 For i = 0 To .ListCount - 1 If .Selected(i) = True Then If Ltm = "" Then Ltm = .List(i) Else Ltm = Ltm & ", " & .List(i) End If End If Next i End With
With ActiveSheet .Range("B" & .Rows.Count).End(xlUp). _ Offset(1, 0).Value = Ltm End With For i = 0 To ListBox1.ListCount - 1 ListBox1.Selected(i) = False Next
what i am trying to do is once i have checked several items in the listbox is have all of the checked choices fill iin column B at once.
Is it possible to get the multiselection the users make in the listbox correlate directly to the original cells the rows pertain to?
the reason is I need to be able to get the users to multi select the cells they want to print and then send print commands to the documents ancd drawings located in their hyperlinks. So if there was some way to pull the Cells selections then I could work with this indefinately. I''m unsure whether this is feasable, I was thinking of putting the multiselect results into an array using the text values then doing a vlookup or something, but the original drawing register sheet doesn't have unique items just unique hyperlinks :P I cannot manipulate the physical layout of the sheet itself as other macro's are located on these sheets.
I refer to the following article from last year, with a similar question. Multiple Selections Drop down list to one cell.
I would like to be able to choose multiple values from a list box and print them into one cell (or at least print them anywhere).
For example: I have a list with products A, B, C, D, E, F Those products are shown in the list box. If e.g. B, D and E are chosen, I would like to have this selection shown together in another cell. That means the content of the cell should be "B, D, E".
If I use the INDEX function (which works fine for single select list boxes), only one of the selected items is displayed in the cell and not even the one I selected.
When i tranfer my listbox content to sheet the selected item remain selected in listbox
Dim i As Long, j As Long For i = 0 To Me.ListBox2.ListCount - 1 If Me.ListBox2.Selected(i) Then j = j + 1 Worksheets("Workings"). Range("AA" & i + 2).Resize(1, 1).Copy Worksheets("Print").Range("B" & Rows.Count).End(xlUp).Offset(1) ListBox1.Selected(i) = False End If Next i
Ive made a worksheet with a userform and ListBox. The listbox is filled with names. If you click on the last button a msgbox with your selected names is displayed. If you select the button without a selection from the listbox a message pop ups to warn that no selection is made. If you select any name afterwards and click on the button the message still pops up unless you select the first entry from the list ("natalie") then the code is right executed. I'm struggeling with the code for several days. I wonder if by any change somebody wants to correct the code. (I've uploaded my sheet)
I have a userform that employees use to enter production data every day. Originally I had this storing the data in excel, but now I would like it to put the data in tables in access.
Here is some code I am trying, but it's giving me an error: "Run-time Error '3251' Current Recordset does not support updating. This may be a limitation of the provider, or of the selected locktype."
VB: ' exports data from the active worksheet to a table in an Access database ' this procedure must be edited before use Dim cnt As New ADODB.Connection
having trouble with the details of actually making these features work for me. I figured out how to create a UserForm with a ListBox and 2 buttons, but I don't know how to proceed from here.
1. Populate the ListBox in the UserForm with a list of names from the sheet "Totals_Dropdowns", cells K2:K11
2. Make the UserForm pop up and enter the user's selection into cell C40 of the "Regenerate Request"
I know these are very basic operations, and I'm pretty sure I can figure out the rest of my problems once I can get past the above.
i have a ListBox in my userform i want to enter n items in the listbox at runtime i also want to have a delete button,so that if i think i dont want that particular item in my listbox,by selecting that item from that listbox and clicking delete,should remove/delete that item from the listbox.
I have a listbox that is populated based on a named range from another workbook. Below is the code that populates it:
Private Sub UserForm_Initialize()
Dim InvDB As Workbook
Set InvDB = Workbooks.Open("C:Documents and SettingsPATSYSDesktopInvoiceDB.xls")
With InvDB
ListBox1.RowSource = .Name & "!rng"
.Close
End With
End Sub My problem.
When I scrollbar down, no data appears.
This leads me to think that I need some kind of userform event to keep populating the listbox (similar to my code above) as I scroll up or down.
My questions: 1. Is it possible to specificy a rowsource in the properties window for the listbox that is pointing to an external workbook? If so, how do I write the rowsource?
I know that if the source workbook is open, I can use the rowsource:
InvoiceDB.xls!rng
But if source workbook is close, the below does not work:
C:Documents and SettingsPATSYSDesktopInvoiceDB.xls!rng
2. What is the userform event when you click the listbox scrollbar up or down?
I have a button that is "Add" in the userform. I would want to Combine different combinations of items together (Listbox1 and fschool) and list them out in a worksheet. However, in the current setting below, whenever i click add again, it replaces the previous one. How do i modify the code such that whenever i click the button, it puts the information in the next row of the worksheet? I tried using K+1 as a new row but it doesn't give any result
Private Sub Add_Click() Dim NewRow As Integer Dim K As Integer NewRow = K + 1 Worksheets("Results"). cells(NewRow, 2).Value = UserForm1.ListBox1.Value Worksheets("Results").cells(NewRow, 3).Value = UserForm1.fschool.Value End Sub
I have listbox on a userform with number and the way it should work is that when I click on a number in listbox the data correspond to this number should be copied from one sheet to another sheet and gets plotted on graph. The problem is when I click on a number in the list box the data moves from one sheet to another and get plotted but only after I exit the userform sheet.
On my userform, the user can decide to take a number of actions, each with its' own listbox. The user doesn't have to select from each. If the user inadvertently goes into a listBox, then there will be a record selected, most certainly erroreously. Is there a way to "remove focus" from the incorrect listBox and remove the selection? Maybe some way to signal that the rowSource should be reloaded?
I have this part of code that populates my ListBox
With UserForm1.ListBox2 .AddItem ActiveCell.Offset(0, 7).Value .AddItem ActiveCell.Offset(1, 7).Value .AddItem ActiveCell.Offset(2, 7).Value .AddItem ActiveCell.Offset(3, 7).Value .AddItem ActiveCell.Offset(4, 7).Value .AddItem ActiveCell.Offset(5, 7).Value .AddItem ActiveCell.Offset(6, 7).Value .AddItem ActiveCell.Offset(7, 7).Value .AddItem ActiveCell.Offset(8, 7).Value .AddItem ActiveCell.Offset(9, 7).Value .AddItem ActiveCell.Offset(10, 7).Value End With It draws the Values (names) off of Sheet1 and ActiveCell is B26
Question one: Is there a better way of writing this and for it to stop adding to the ListBox once there is no Value in the Offset cell....
The compile errors were happening in the For i statement, interesting enough the compile error went away after I closed the demo/example worksheet that had it in there too...? Not sure if that was the exact fix/trick. Now comes the next error: Run-time error '13': Type mismatch on the line highlighted below.
What else can cause this Run-Time error?? or is there another way to carry the listbox result into that second column. I am starting to think that the Run-Time is because the value selected was not found in that second column, or I am looking in the wrg column.....
Private Sub CommandButton1_Click()
Dim lbVal As Long
If ListBox1.ListIndex = -1 Then Exit Sub 'Not sure that I need the next line. Listbox is a SingleSelect. For i = ListBox1.ListCount - 1 To 0 Step -1 If ListBox1.Selected(i) = True Then lbVal = ListBox1.Value
