Difference In How A Cell Is Selected
May 6, 2009
When I write a macro in Worksheet_SelectionChange event, excel doesn't know the Target.Address if the cell is selected via Tab key or selected via search feature of excel. It only recognizes the Target if it is selected via mouse click.
Is there a way around this, so the selection_change event would respond properly?
View 10 Replies
ADVERTISEMENT
Oct 10, 2006
Basically it is a if statement saying that if the selected cell falls between 1/01/06 and 31/01/06 then Jan would be selected. The end part is not a problem; I’m just not sure how to write the one line of code that would test if the cell falls between the two dates. I attemped to create it as shown in the code attached below but wasn't successful. I used an else if statement to test the other 11 months.
Sub test()
Dim SelectDate As Range
Set SelectDate = Range("SelectedDate")
If selectedDate >= 1 / 1 / 2006 And selectedDate <= 31 / 1 / 2006 Then
ActiveSheet. PivotTables("PivotTable1").PivotFields("PnLDate").CurrentPage = _
"Jan"
ElseIf selectedDate >= 1 / 2 / 2006 And selectedDate <= 28 / 2 / 2006 Then
ActiveSheet.PivotTables("PivotTable1").PivotFields("PnLDate").CurrentPage = _
"Feb"........................
View 4 Replies
View Related
Oct 30, 2009
what's the difference between cell a1 and b1?. see attachment.
View 3 Replies
View Related
Mar 21, 2013
I've been facing a strange issue relating to Cell to Cell movement speed using arrow keys. I've two laptops which have similar specifications and operating systems. In one laptop, the movement speed, when I continuously keep any of the arrow keys pressed for some time, is very very high as compared to the other laptop. Did try to search a lot about increasing the speed of cell to cell movement with arrow keys but was not successful.
The speed difference is so high that it affects the efficiency at workplace as the movement is so fast that I navigate through the tables very quickly and easily and complete my task much earlier than on the other laptop.
View 2 Replies
View Related
Jun 2, 2009
I have the following on a spreadsheet that keeps track of when student work is handed in and calculates how many days late it is so a penalty mark can be given.
A1= User entered value : a fixed submission date that a piece of work is due to be handed in on.
A2 = User entered value : The date entered if work is handed in on time or early
A3 = User entered value : The date the work was handed in if late
A4 = User entered value : The date the piece of work is due to be handed in if an extension has been granted
A5 = Calculated value : How many days late a piece of work is
Essentially I want the calculation in A5 to reflect how many days late a piece of work is. SUM(A3-A1) would do this of course. If the work is early or on time, A2 is ignored.
Sometimes however students have permission to hand work in late, in which case another calculation is needed to work out how many (if any) days over their extension date (A4) their work is. How do I combine these two calculations into the same cell, so that if A3 is empty it checks A4 to see if the student has an extension date and then returns a 'days late' value if applicable?
View 9 Replies
View Related
Jan 10, 2007
I am working on an employee weekly schedule and would like to be able to calculate the amount of hours an employee is scheduled each day. For example; if you worked from 7am to 4pm, I want to have a formula that can determine that (7am to 4pm= 9 hours) then sum the total amount of hours for all employees scheduled that day.
Mon Tue Wed Thrs Fri Sat Sun Total
Employee 1 7-4 7-4 8-5 off 2-10 5-10 off 40
Employee 2 8-5 11-8 off 7-4 1-8 off 8-5 43
Hours 18 18 9 9 15 5 9 83
View 2 Replies
View Related
Aug 14, 2007
I need some IF formula I believe that will yield an answer between 1 - 5. I'm not swavey enough with these things to figure this one out... trust me I tried and it keeps getting more confusing for me.
If the time worked is between certain time criteria then it would equal 1 - 5 depending on the time.
Example: If I work between the hours of 5am and 1pm then I would be in the Open/Mid range and would need to equal 2. If I only worked a few hours and my hours fell only between the Mid range then it would equal 3.
Then based on that... It would automatically fill in on the deployment charts... My name would show up on the Open and Mid Deployments under the task chosen for me to do that day.
I've attached a small sample of what I am looking for to kind of help show what I need. The highlighted areas are the areas I'm not sure how to do.
View 9 Replies
View Related
Jan 15, 2008
I would like to have a complete column compared with its immediate next values and delete the values whose difference is more dhan 5.Im new to VB programming.
D
12.90
13.34
19.90
26.90
21.55
If dis is my set of data how should i use range values?
View 2 Replies
View Related
Apr 26, 2014
How would i wrte this formula correctly?
=IF(SUM(I5:J26))-(SUM(D5:E26))>=0,0,(SUM(I5:J26))-(SUM(D5:E26)
It needs to say if the sum of the two cell ranges is less than or equal to zero then display as zero, otherwise display the answer
View 3 Replies
View Related
Feb 12, 2010
I have a monitoring system that records a data point with a date/time stamp several times a day at random intervals. For each reading I want to calculate the change compared to the first reading that was more than 24 hours ago, which could be anywhere from 1 to 20 rows above the current one. Hence with the timestamp in col A and the value in col B, the formula in col C, for example cell C20, needs to read something like =B20-Bxyz, where xyz is the row number of the first reading that is more than 24 hours, i.e the first row xyz where A20-Axyz >1.
View 4 Replies
View Related
Aug 30, 2013
Is there a way to make a cell display the text difference between two cells?
For example of cell E2 reads "Thank Goodness it is Friday" and cell F2 reads "Thank Goodness" can I put a formula in H2 that will show the text that is in E2 but not F2 ( "it is Friday")?
View 1 Replies
View Related
Jan 24, 2008
I have two sets of data, one is recorded every 5 minutes and the other is every 15 minutes. I am trying to add every 3 cells in the 5 minute column so I can compare it side by side with the 15 minute column. I have tried one of the responses in this forum with placing 0s in 2 cells and then the formula in the third however this does not allow me to compare the 2 sets side by side.
View 4 Replies
View Related
Apr 18, 2013
When I use the mouse pointer to select a cell I can't use the arrow keys to move to another cell while the pointer is over the cell and I can't edit the cell while the pointer is over the cell. If I move the pointer away from the cell then I can move around and edit as normal therefore I don't think this is a scroll lock issue.
This issue also happens when I select a tab. If I select a tab and then leave the pointer over the tab I selected then I can't use the arrow keys to move around the worksheet or edit a cell; if I move the pointer away from the cell then I can move around and edit as normal.
I am using MS Excel 2010.
View 1 Replies
View Related
Jan 6, 2014
i am trying to find the time difference between two cells and present the date in a third cell. The data in the cells are in a non standard date/time and i need to create a special format i think. The cells look like this.
fldcollected fldaccepted Type Time between being received by database and eccepted
2013-11-06 15:59:29.1002013-11-07 08:41:12.000PSTN
View 3 Replies
View Related
Apr 26, 2014
Sheet1 is Main Sheet which never will be amended and these numbers will be a source for pulling mathematical functions
See attached :
Sheet1.png
Don't be bothered about cell colors etc. They are for my reference
Sheet2
Will contain same Problem Ticket numbers but different (or same) values with number of 'Linked Incidents'
See screenshot
Sheet2.png
Based on Problem ID 10248
Main sheet shows 92 Linked Incidents
Value on Sheet two brings 93
If A5 Sheet2 value can be found in ColumnA Sheet1, look for a number in ColumnC, same ROW and compare it to C7 in Sheet2 ?
Bring up difference value, which in this case would be one.
View 1 Replies
View Related
Jul 25, 2014
I am using this code to hide or unhide rows of text on another sheet:
VB:
Sub ProcessSheet1ChangeOnCellJ7(ByVal Target As Range)
Dim sAddress As String
Dim sValue As String
'Get the address of the cell that changed without '$' signs
sAddress = Target.Address(False, False)
[Code]....
When the "Not Pursuing" list box option is selected (in cell "J7" or "J8" in Sheet 1) I need to add (or over-write) "Not Pursuing" to the range of cells in column "B" (in the "Tasks" sheet), but only for that particular Goal, meaning a limited range of cells in column "B". If the "Pursuing - Show All Tasks" option is selected for a Goal then these same cells need to be blank so that the appropriate person can enter their name into the cell.
The purpose for adding "Not Pursuing" automatically to these yellow highlighted cells is that it will facilitate filtering of tasks by individual in the "Tasks" sheet..
Again I have tried several times to upload a sample file and am unable to, which I know makes it more difficult to solve. (Is there some common mistake people make? I know it's an allowed format and is very small in file size....)
Code solution can be entered directly beneath:
VB:
If Target.Value = "Not Pursuing" Then
ActiveWorkbook.Sheets("Tasks").Rows("29:29").EntireRow.Hidden = False
ActiveWorkbook.Sheets("Tasks").Rows("30:48").EntireRow.Hidden = True
View 1 Replies
View Related
Jun 20, 2014
I am trying to do is to make it so that users can enter data into my form (I have managed to create the form and am working on trying to figure out how to get the info entered into the form to appear in my worksheet) and then the data will cause the information to, basically, compile sentences that I want to appear in one of three cells at the bottom of the worksheet.
Essentially, at this point in time, the end goal is to make 3 cells that contain text. Eventually, this text will be indexed elsewhere, but that is for the next person to deal with. I am creating a prototype that I want to present as a process improvement.
So, when the user selects 3 in cell D7 I want the text "Customer purchased 3 Widgets at $20 each." to print in cell 82B.
I also want the user to be able to copy and paste some customer records from another program directly into a cell in the form that will just print (unchanged) into one of these boxes, too.
Lastly, I want the user to be able to select checkboxes that will, when selected, print a comment that will print in two of these boxes. For example, if the user selects yes for cell D26 then I want the text "Customer not eligible for free shipping" to appear in both cells C82 and D82.
View 5 Replies
View Related
Oct 16, 2013
I have big library books database file. now i want to re check all the book with physical stock and mark in excel file.
i have one more file with books barcode no.
now i want to mark multiple cell in sheet..
View 3 Replies
View Related
Feb 5, 2010
i am currently using the macro below to import text files into a spreadsheet. Currently, it begins the import in cell A1 which is what I recorded it to do. how do I change the code to begin the import on the active cell?
View 2 Replies
View Related
Jan 25, 2012
Macros question - The user enters a word, e.g. Malaysia in a particular cell (always the same location) and I want the macro to be able to find the next cell with that word in it, but it appears that when using macros you can't paste anything into the find function, so was just wondering what to do!
View 1 Replies
View Related
Feb 21, 2008
I am trying to restrict a cell so all that happens when clicked is an X to appear in that cell. I'm new to this so the simpler the better.
View 11 Replies
View Related
Sep 18, 2009
Basically I have a filtered list in colunms A to D. The user selects a cell in column A and I want to then be able to run a macro which copies that cell and the adjacent one in column B, into columns A and B on sheet2.
The complications are
Column B on the second sheet is merged with columns D to E so a straight forward cut and paste of A and B on sheet 1 into A and B on sheet 2 will not work in one cut and paste as it complains about merged cells. It would need to copy and paste A and then copy and paste B to avoid the error.
The row on sheet 2 where it is being pasted needs to be the first row between row 10 and row 30 where col A is blank (so it doesnt overwrite a previous copy and paste as they are basically creating a list on sheet 2 in those rows by runing this macro repeatedly). if there is no blank row then it should insert a new row at row 10 and paste into that
View 9 Replies
View Related
Apr 30, 2012
Sheet 1 is a table with the first column and first row as text (table headings). The first column is names and first row is from report names.Namereport 1report 2Jane Doe114John Doe52
Sheet 2 is the report1, for example purposes
NameJane DoeJane DoeJane DoeJane DoeJane DoeJane DoeJane DoeJane DoeJane DoeJane DoeJane DoeJohn DoeJohn DoeJohn DoeJohn DoeJohn Doe
I am trying to have it to so that when you double click on cell B2 of sheet1, it will go to sheet2 and autofilter on the value to the left of B2 on sheet1 "Jane Doe"
This is what I have so far but when I double click on B2 it just moves the cursor to the cell to the left instead of filtering on the value of the cell to the left on sheet2.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim id As String
If IsEmpty(ActiveCell) = False Then
ActiveCell.Offset(0, -1).Select
Else
id = CStr(Selection)
Sheet2.Activate
Sheet2.Range("A1:A500").AutoFilter Field:=1, Criteria1:=IsEmpty(ActiveCell) = False And ActiveCell.Offset(0, -1).Value.id
End If
End Sub
View 3 Replies
View Related
Jan 17, 2007
How would I get a particular cell to display the contents of any cell that might be selected.
ie, if I click on A1 I want A2 to display the info thats in A1, and if after that, I click on E12, I want A2 to then show E12's info, etc etc.
View 9 Replies
View Related
Sep 22, 2006
to find event that is triggered when cell is selected.
Or maybe there is a better way to do this?
This is what i want:
When user clicks given cell form will pop up letting user choose cell value from Combo box.
I wanted to use Cell Selected event and just pop up Form but maybe i can do it withought VB.
Is there a way to limit possible cell values to few predefined values?
So user cant put there whatever he/she wants?
View 5 Replies
View Related
Oct 9, 2008
The outline that indicates my selected cell is a very pale blue which I can hardly see. how to change it to black or some color I can see?
View 3 Replies
View Related
Jul 28, 2009
I would like to instantly mirror any selected cell within a specific column into another specified cell.
Example:
If A1 has the value 4, A2 has the value 6, A3 has 7, A4 has 9, and I click on those cells in the order above, I would like to see the cell I specify show the same value when I've selected (clicked on) them.
View 5 Replies
View Related
Aug 22, 2009
A macro was submitted in a similar thread, but I have a slightly different problem. I have empty cells, A1:A10, and in cells C1:C10 I have data. If A1 is selected, I would like to be able to click on any cell in colum C and that info then appears in A1. Then I will select A2, and again, click on any cell in C1:C10 and that appears in A2 and so on. I do not want cells A1 etc. to
change once populated. This can be a macro as well.
View 8 Replies
View Related
Nov 2, 2009
Can anyone help me in finding how to write the command in VBA to determine what Cell was selected in a worksheet? The objective is to know what Cell has been selected by double click event to pop up a userform with a calendar from which the user can select the date. I am looking at making it dynamic so I do not select a particular range.
Can this be achieved? I guess yes, but how?
View 9 Replies
View Related
Dec 16, 2009
I'm lost on VBA, but I have been successful at recording a few extremely simple macros. I have a number of pdf statements that I have run through OCR, and the OCR often misses the decimal point so that 43.85 comes out as 4385. (this is in dollars, so everything has 2 decimals).
These cells are usually pretty easy to spot, so I want to select that cell, press a keystroke or 2, and divide the value in that cell by 100. I assumed that by selecting "relative cell references", and recording a macro with the keystrokes "<F2>/100<HOME>=" (without the quotes, of course), I would accomplish that. But instead, it places a constant in that cell, with the value obtained in the cell where I recorded the macro.
View 9 Replies
View Related