Selected Cell Outline
Oct 9, 2008The outline that indicates my selected cell is a very pale blue which I can hardly see. how to change it to black or some color I can see?
View 3 Replies
ADVERTISEMENT
Outline And Rollup Subtotals Based On Outline Numbering In Column A
Jul 10, 2012I have a spreadsheet that contains an outline-like number in column A, except where there are values in Column C. What I want is to automatically outline based on column A and subtotal at each succesive outline level (i.e. I would like to be able to roll up the subtotals to variousl depths of the outline).
Code:
A B C
1.1first level
1.1.1Second level
1.1.1.1third level
value 5
1.2first level
1.2.1second level
value 7
value 4
1.2.2second level
1.2.2.1third level
value 6
How To Reenable Copy And Paste By Dragging Outline On A Cell
Jan 2, 2013When I'm in edit mode (in other words, when I double click on a cell to, say, make a reference to another cell), it still displays the colours of the cells that they're referring to. However, it only shows a simple outline but cannot move it by mouse. I should be able to see small squares in each corner of the cell so I can either move it or enlarge/shrink the cell reference. how to re-enable this feature. I like it because I need to be able to SEE the cells better
View 2 Replies View RelatedElseif Statement In Vba: If The Selected Cell Falls Between 1/01/06 And 31/01/06 Then Jan Would Be Selected
Oct 10, 2006Basically it is a if statement saying that if the selected cell falls between 1/01/06 and 31/01/06 then Jan would be selected. The end part is not a problem; I’m just not sure how to write the one line of code that would test if the cell falls between the two dates. I attemped to create it as shown in the code attached below but wasn't successful. I used an else if statement to test the other 11 months.
Sub test()
Dim SelectDate As Range
Set SelectDate = Range("SelectedDate")
If selectedDate >= 1 / 1 / 2006 And selectedDate <= 31 / 1 / 2006 Then
ActiveSheet. PivotTables("PivotTable1").PivotFields("PnLDate").CurrentPage = _
"Jan"
ElseIf selectedDate >= 1 / 2 / 2006 And selectedDate <= 28 / 2 / 2006 Then
ActiveSheet.PivotTables("PivotTable1").PivotFields("PnLDate").CurrentPage = _
"Feb"........................
Outline/wbs Sort
Jun 25, 2007have an Excel VBA function to sort an Outline/WBS?
I have tried the conventional Excel text and numeric sort but they do not work on an Outline/WBS.
I have a column in an excel workbook with a Outline/WBS.
If a user uses the default Excel sort I need to sort the Outline/WBS back to the correct Outline structure (example below):
1
1.1
1.2
1.3
1.3.1
1.3.2
2
2.1
2.2
2.2.1
2.2.2
2.3
Outline.ShowLevels Event And Value
Jun 12, 20061. Is there an event when Outline.ShowLevels are changed? I want to hide some columns when the outline level changes depending on the level. For example if Outline.ShowLevels is 2 I want to hide certain columns and if Outline.ShowLevels is 3 I want to unhide those columns. I realise you can have a mix of levels showing but I will hideunhide the columns based on what has changed ie from level 2 to level 3 or vice versa.
View 6 Replies View RelatedGroup And Outline Columns
May 25, 2007i have seen this cool feature in a workbook, but I am unable to find out how implement it myself. I can't really explain it (thus I am unable to find good search results) so I have added a little picture of what I mean. Its about adding controls for hiding and unhiding columns. How do I get such nice plusses and minusses into my workbook? I use Excel 2002
View 4 Replies View RelatedExcel 2003 :: Group And Outline
May 14, 2013In Excel 2003 I have Manually Grouped a number of rows. (Data>Group and Outline>Group).
If I use the buttons with the numbers 1, 2, 3 (indicating an outlining level) to collapse or expand the outline I receive the Error Message: "Cannot shift objects off sheet."
If I use the collapse button (-) or expand (+) button the data collapses and expands as I would expect.
I am aware of the normal issues surrounding objects and outlining and have ensured that I have changed the properties of all my of the objects in the sheet to "Move and size with cells". There are no comments in the grouped rows.
Turn Off Group Box Outline And Label?
Sep 15, 2013I know how to insert various groups of radio buttons on one sheet. They must be in their own group box control. The problem I have is that I don't see any option to turn off the resulting group box outline and label so it cannot be seen. Is there some way to do that in Excel 2010? I have 16 groups of two radio buttons across the top of the sheet and space is at a premium. If there was no outline it would look much nicer. The cells below the radio buttons function as the labels the way I am using them.
View 5 Replies View RelatedEnable Outline But Protect Sheet
Sep 15, 2007I have a sheet that is several hundred rows long and so I have grouped like data so the user can expand or colapse the data they would like to see. There is nothing on the page the user will need to modify so I have protected the page so they cannot make changes. If I protect the sheet then I am no longer able to expand or colapse the groupings.
View 6 Replies View RelatedTrapping Outline Expand / Collapse
May 15, 2009I suspect I need a class module for this...
How do I trap the event when a user chooses to expand / collapse outlines (columns in this instance) on a worksheet?
Basicallly, when attempting to expand I want to prompt the user to enter a password and then unprotect the sheet. And if collapsing to prompt again and then protect the sheet. I have this bit covered, just not sure how to trap the event.
Group/Outline Worksheets When Protected
Aug 20, 2008I Need the outline/group feature to work on a protected workbook with over 200 sheets, meaning a macro to cover the entire workbook not just a single sheet. This macro should travel with the workbook as it will be on many different peoples PC's
Private Sub Workbook_Open()
Dim cSheet As Integer
Dim tSheet As Worksheet
On Error Resume Next
cSheet = 1
Set tSheet = Worksheets(cSheet)
While Err.Number = 0
Call wbProtect(tSheet)
cSheet = cSheet + 1
Set tSheet = Worksheets(cSheet)
Wend
Err.Number = 0
End Sub..........................
Group & Outline On Protected Worksheet
Jul 25, 2006I curently using the group and outline to subtotal certain data. I do not want to data to be modified. As a result I protect the particular sheet. Problem is once I protect the worksheet, I can't expand the data hidden (using the group & outline). Is there anyway that i can expand the data & in the same time protect the
data. A sample in enclose(without worksheet protected)
Show Different Outline Levels Of 2 Groups
Mar 19, 2008I have two groups (outlines) of columns on the same sheet. the following line :
ActiveSheet.Outline.ShowLevels 0, 1
controls the two groups. What if I want different levels od detail for each group ?
TIA.
Daniel
Automatic & Dynamic Row Numbering For Outline Numbers Like #.#.#
Mar 11, 2008I would like to ask for some assistance to my Spreadsheet problem.
To illustrate my problem please see below:
1------------> Level 1
1.1----------> Level 1 Sublevel 1
1.1.1--------> Level 1 Sublevel 1 Item 1
1.1.2--------> Level 1 Sublevel 1 Item 2
1.2----------> Level 1 Sublevel 2
1.2.1--------> Level 1 Sublevel 2 Item 1
1.2.2
2
2.1
2.1.1
2.1.1
2.2
and so on
I need to have a formula to automate the adding of outline numbers from "Level 1, Sublevel 1, Item 1..." So that if I deleted or added a row, the rest will automatically update themselves.
I will be the one manually inputing the Top Level and Sublevels I just need that the Items will be automatically added and computed basing from the previous level.
What I am planning to do is:
1. Check previous cell if the format has two decimal points or periods --> kinda stuck here
2. If there's only one then it will be the Sublevel 1 Item 1 (or depending to its location)
3. If there's already two periods "." then it will compute automatically for what item it is already.
ie:
1
1.1
1.1.1
1.1.2----->Checks the previous cell if it has 2 decimal places then if it does then it will add 1
Capture Group/Outline Row Hide/Show
Apr 26, 2008The following is how the data is displayed:
[JAN] [a] [FEB] [b] [MAR] [c] [Q1] [APR] [d] [MAY] [e] [JUN] [f] [Q2] etc.
Basically, it is months and quarter. However I have an additional column that is hidden after each month - [a], [b], [c] etc. Those are displayed whenever a cell in the previous column is clicked. Now, I select all the columns from [JAN] to [c] and group them and I have a + on the top most row.
Problem is when I click on +, it expands the month as well as [a] [b] [c]. I have a macro to hide these, but how do I trap the [+] [-] action and run the hiding macro after that?
Outline Macro Not Allowing Filtering On A Protected Sheet?
May 5, 2014I have the following macro so that we can use the outline feature without having to unprotect a sheet.
Private Sub Workbook_Open()
With Worksheets("Schedule")
.Protect Password:="APQP", Userinterfaceonly:=True[code]....
However once the macro is run, filtering will not work without unprotecting the sheet first. If you choose not to run the macro, filtering will work without unprotecting the sheet however the outline feature will not. what I need to add and where to make both the outline and filter features to work without having to unptotect the sheet?
Outline And Group And Subtotal Excel Data Automatically
May 19, 2014Is there any way to outline excel data automatically
In the attached excel sheet : test outline.xls
I need automatically Because my data very large ...
Retain Use Of Group/Outline On Protected Sheets/Worksheets
Oct 5, 2006I have a sheet that I protect but i use the below code so that I can still use my gouping '+' or '-' symbols to hide/unhide rows.
ws.Protect Password:="PASSWORD", userinterfaceonly:=True
ws.EnableOutlining = True
This is ok but When close the workbook and reopen it, my sheet becomes fully protected and i cant use the group icons. Can anyone either suggest better code or a way to initilise the workbook to act in this way when it loads up. For Reference Below is my full
Sub ProtectAll()
Dim ws As Worksheet
sSheet = Control.Name
For Each ws In ThisWorkbook.Worksheets
Select Case ws.Name
Case sSheet1
Case Else
ws.Protect Password:="PASSWORD", userinterfaceonly:=True
ws.EnableOutlining = True
End Select
Next ws
End Sub
Excel 2010 :: When Cell Selected Can't Use Arrows To Move To Another Cell While Pointer Is Over The Cell
Apr 18, 2013When I use the mouse pointer to select a cell I can't use the arrow keys to move to another cell while the pointer is over the cell and I can't edit the cell while the pointer is over the cell. If I move the pointer away from the cell then I can move around and edit as normal therefore I don't think this is a scroll lock issue.
This issue also happens when I select a tab. If I select a tab and then leave the pointer over the tab I selected then I can't use the arrow keys to move around the worksheet or edit a cell; if I move the pointer away from the cell then I can move around and edit as normal.
I am using MS Excel 2010.
Fill Range Of Cells With Text When Listbox Option Selected - Clear When Not Selected
Jul 25, 2014I am using this code to hide or unhide rows of text on another sheet:
VB:
Sub ProcessSheet1ChangeOnCellJ7(ByVal Target As Range)
Dim sAddress As String
Dim sValue As String
'Get the address of the cell that changed without '$' signs
sAddress = Target.Address(False, False)
[Code]....
When the "Not Pursuing" list box option is selected (in cell "J7" or "J8" in Sheet 1) I need to add (or over-write) "Not Pursuing" to the range of cells in column "B" (in the "Tasks" sheet), but only for that particular Goal, meaning a limited range of cells in column "B". If the "Pursuing - Show All Tasks" option is selected for a Goal then these same cells need to be blank so that the appropriate person can enter their name into the cell.
The purpose for adding "Not Pursuing" automatically to these yellow highlighted cells is that it will facilitate filtering of tasks by individual in the "Tasks" sheet..
Again I have tried several times to upload a sample file and am unable to, which I know makes it more difficult to solve. (Is there some common mistake people make? I know it's an allowed format and is very small in file size....)
Code solution can be entered directly beneath:
VB:
If Target.Value = "Not Pursuing" Then
ActiveWorkbook.Sheets("Tasks").Rows("29:29").EntireRow.Hidden = False
ActiveWorkbook.Sheets("Tasks").Rows("30:48").EntireRow.Hidden = True
Forumla To Determine Outline "parent"
Oct 14, 2009I have created a quick ouline for a chart of accounts. I would like to have a formula that verifies that all the 'children' sum up to the parent at each level of the outline.
I have a column with the integer value of the outline level, 0 being the "root", and each sub-level going up. i.e. 1's would be children of 0s, 3's children of 2's, etc.
Example:
0 Entity Value
1 Child1 Value
1 Child2 Value
2 Child1a Value
2 Child2b Value
1 Child3 Value
0 Entity2 Value
1 Etc...
How would you write a formula that verifies that a row's value is the sum of the children that are associated with it?
When User Enters Data Into One Cell - Selected Text Prints In Another Cell
Jun 20, 2014I am trying to do is to make it so that users can enter data into my form (I have managed to create the form and am working on trying to figure out how to get the info entered into the form to appear in my worksheet) and then the data will cause the information to, basically, compile sentences that I want to appear in one of three cells at the bottom of the worksheet.
Essentially, at this point in time, the end goal is to make 3 cells that contain text. Eventually, this text will be indexed elsewhere, but that is for the next person to deal with. I am creating a prototype that I want to present as a process improvement.
So, when the user selects 3 in cell D7 I want the text "Customer purchased 3 Widgets at $20 each." to print in cell 82B.
I also want the user to be able to copy and paste some customer records from another program directly into a cell in the form that will just print (unchanged) into one of these boxes, too.
Lastly, I want the user to be able to select checkboxes that will, when selected, print a comment that will print in two of these boxes. For example, if the user selects yes for cell D26 then I want the text "Customer not eligible for free shipping" to appear in both cells C82 and D82.
Find And Mark Multiple Cell In Sheet And Also Colored Same Selected Cell?
Oct 16, 2013I have big library books database file. now i want to re check all the book with physical stock and mark in excel file.
i have one more file with books barcode no.
now i want to mark multiple cell in sheet..
Change A Macro To From And Absolute Cell Reference To Selected Cell.
Feb 5, 2010i am currently using the macro below to import text files into a spreadsheet. Currently, it begins the import in cell A1 which is what I recorded it to do. how do I change the code to begin the import on the active cell?
View 2 Replies View RelatedFinding Cell Based On Text In Currently Selected Cell?
Jan 25, 2012Macros question - The user enters a word, e.g. Malaysia in a particular cell (always the same location) and I want the macro to be able to find the next cell with that word in it, but it appears that when using macros you can't paste anything into the find function, so was just wondering what to do!
View 1 Replies View RelatedTrying To Get An X To Appear In Cell When Selected
Feb 21, 2008I am trying to restrict a cell so all that happens when clicked is an X to appear in that cell. I'm new to this so the simpler the better.
View 11 Replies View RelatedCopying A Selected Cell In Col A And The Next Cell In Col B Into New Sheet
Sep 18, 2009Basically I have a filtered list in colunms A to D. The user selects a cell in column A and I want to then be able to run a macro which copies that cell and the adjacent one in column B, into columns A and B on sheet2.
The complications are
Column B on the second sheet is merged with columns D to E so a straight forward cut and paste of A and B on sheet 1 into A and B on sheet 2 will not work in one cut and paste as it complains about merged cells. It would need to copy and paste A and then copy and paste B to avoid the error.
The row on sheet 2 where it is being pasted needs to be the first row between row 10 and row 30 where col A is blank (so it doesnt overwrite a previous copy and paste as they are basically creating a list on sheet 2 in those rows by runing this macro repeatedly). if there is no blank row then it should insert a new row at row 10 and paste into that
Filter By Value In Cell To The Left Of Selected Cell
Apr 30, 2012Sheet 1 is a table with the first column and first row as text (table headings). The first column is names and first row is from report names.Namereport 1report 2Jane Doe114John Doe52
Sheet 2 is the report1, for example purposes
NameJane DoeJane DoeJane DoeJane DoeJane DoeJane DoeJane DoeJane DoeJane DoeJane DoeJane DoeJohn DoeJohn DoeJohn DoeJohn DoeJohn Doe
I am trying to have it to so that when you double click on cell B2 of sheet1, it will go to sheet2 and autofilter on the value to the left of B2 on sheet1 "Jane Doe"
This is what I have so far but when I double click on B2 it just moves the cursor to the cell to the left instead of filtering on the value of the cell to the left on sheet2.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim id As String
If IsEmpty(ActiveCell) = False Then
ActiveCell.Offset(0, -1).Select
Else
id = CStr(Selection)
Sheet2.Activate
Sheet2.Range("A1:A500").AutoFilter Field:=1, Criteria1:=IsEmpty(ActiveCell) = False And ActiveCell.Offset(0, -1).Value.id
End If
End Sub
Particular Cell To Display The Contents Of Any Cell That Might Be Selected
Jan 17, 2007How would I get a particular cell to display the contents of any cell that might be selected.
ie, if I click on A1 I want A2 to display the info thats in A1, and if after that, I click on E12, I want A2 to then show E12's info, etc etc.