Elseif Statement In Vba: If The Selected Cell Falls Between 1/01/06 And 31/01/06 Then Jan Would Be Selected
Oct 10, 2006
Basically it is a if statement saying that if the selected cell falls between 1/01/06 and 31/01/06 then Jan would be selected. The end part is not a problem; I’m just not sure how to write the one line of code that would test if the cell falls between the two dates. I attemped to create it as shown in the code attached below but wasn't successful. I used an else if statement to test the other 11 months.
Sub test()
Dim SelectDate As Range
Set SelectDate = Range("SelectedDate")
If selectedDate >= 1 / 1 / 2006 And selectedDate <= 31 / 1 / 2006 Then
ActiveSheet. PivotTables("PivotTable1").PivotFields("PnLDate").CurrentPage = _
"Jan"
ElseIf selectedDate >= 1 / 2 / 2006 And selectedDate <= 28 / 2 / 2006 Then
ActiveSheet.PivotTables("PivotTable1").PivotFields("PnLDate").CurrentPage = _
"Feb"........................
View 4 Replies
ADVERTISEMENT
Jul 18, 2014
I have a macro right now which makes a selection and then checks that selection to make sure it has less than 5,000 rows. If it has more, then a message box appears and we end the macro. However, in order for this macro to work properly for me, I need to change the if statement so that instead of checking for the amount of rows selected, I only need it to check if ROW 2 is selected. Is this possible? If not, can we have an IF statement to check the contents of ROW 2 (Row 2 is my header on the worksheet and will never change)?
Here is the code I currently have: [Code] ......
View 3 Replies
View Related
Aug 10, 2007
I'm trying to create an if statement that have 2 criterias. Here's what I've created:
=IF(COUNT(F2:F4)=('2007Open'!H2:H4),COUNT('2007Open'!B2:B4)=8,'2007Open'!H2:H4)
This statement is returning the #VALUE error.
I guess what I'm trying to do with this statement is to count how many values are not equal to 2007Open!H2:H4 and meets another criteria of 8.
View 9 Replies
View Related
Jul 25, 2014
I am using this code to hide or unhide rows of text on another sheet:
VB:
Sub ProcessSheet1ChangeOnCellJ7(ByVal Target As Range)
Dim sAddress As String
Dim sValue As String
'Get the address of the cell that changed without '$' signs
sAddress = Target.Address(False, False)
[Code]....
When the "Not Pursuing" list box option is selected (in cell "J7" or "J8" in Sheet 1) I need to add (or over-write) "Not Pursuing" to the range of cells in column "B" (in the "Tasks" sheet), but only for that particular Goal, meaning a limited range of cells in column "B". If the "Pursuing - Show All Tasks" option is selected for a Goal then these same cells need to be blank so that the appropriate person can enter their name into the cell.
The purpose for adding "Not Pursuing" automatically to these yellow highlighted cells is that it will facilitate filtering of tasks by individual in the "Tasks" sheet..
Again I have tried several times to upload a sample file and am unable to, which I know makes it more difficult to solve. (Is there some common mistake people make? I know it's an allowed format and is very small in file size....)
Code solution can be entered directly beneath:
VB:
If Target.Value = "Not Pursuing" Then
ActiveWorkbook.Sheets("Tasks").Rows("29:29").EntireRow.Hidden = False
ActiveWorkbook.Sheets("Tasks").Rows("30:48").EntireRow.Hidden = True
View 1 Replies
View Related
Jun 27, 2013
I have tried to shorten my code by combining common tasks, however it runs but selects the wrong data. In the example below,
The code returns the expected if I select "M135X" and "300 hrs", but unexpected results if "M135X" and "1500 hrs" is selected
My variables are models and hours - the code below is for one model.
Code:
'Next Model
ElseIf Range("D3") = "M135X" And Range("E3") = "1st Service" Then
ThisWorkbook.Worksheets("M100X-135X").Range("B37:D44").Copy
Range("J10").Select
Selection.PasteSpecial Paste:=xlPasteValues
Application.CutCopyMode = False
[Code] .........
View 5 Replies
View Related
Jun 19, 2006
I have created a user form with a combo box and three text boxes. The drop down box is populated via the initialization of the form; code is posted below.
the "add item" names are names that are already on the worksheet in column 1. What i have done is used the command button "submit" to populate the information from the textboxes to the worksheet.
what i would ike to do is populate the empty cells below this area with the information that is in all three text boxes and the combo box. for the IF / elseif statments i have used the combo box as the condition. So the quandry is I cant input the information into the empty cells, i have tried a few things, my vba is very basic, as you can tell ihavent even DIM'd anything (i think that is another thread though :D )
here is the initialize code and below is the "submit button" code.
Private Sub UserForm_Initialize()
'sets values for text boxes
cbomaterialdiscription.Value = ""..........
View 9 Replies
View Related
Feb 6, 2008
The following code inserts a row below the selected row, and copies the formula of the row above into it.
Dim Rw As Integer
Rw = ActiveCell.Row
Selection.Insert Shift:=xlDown
Rows("" & Rw - 1 & ":" & Rw - 1 & "").Copy
Rows("" & Rw & ":" & Rw & "").Paste
However, I need to alter this to work for inserting more than one row at a time. ie. the user selects 'x' number of rows and 'x' rows are inserted below (in the same way 'Insert Row' works in Excel) and the row above the selection is copied down.
View 2 Replies
View Related
Feb 21, 2008
I am trying to restrict a cell so all that happens when clicked is an X to appear in that cell. I'm new to this so the simpler the better.
View 11 Replies
View Related
Oct 9, 2008
The outline that indicates my selected cell is a very pale blue which I can hardly see. how to change it to black or some color I can see?
View 3 Replies
View Related
May 6, 2009
When I write a macro in Worksheet_SelectionChange event, excel doesn't know the Target.Address if the cell is selected via Tab key or selected via search feature of excel. It only recognizes the Target if it is selected via mouse click.
Is there a way around this, so the selection_change event would respond properly?
View 10 Replies
View Related
Jul 28, 2009
I would like to instantly mirror any selected cell within a specific column into another specified cell.
Example:
If A1 has the value 4, A2 has the value 6, A3 has 7, A4 has 9, and I click on those cells in the order above, I would like to see the cell I specify show the same value when I've selected (clicked on) them.
View 5 Replies
View Related
Aug 22, 2009
A macro was submitted in a similar thread, but I have a slightly different problem. I have empty cells, A1:A10, and in cells C1:C10 I have data. If A1 is selected, I would like to be able to click on any cell in colum C and that info then appears in A1. Then I will select A2, and again, click on any cell in C1:C10 and that appears in A2 and so on. I do not want cells A1 etc. to
change once populated. This can be a macro as well.
View 8 Replies
View Related
Nov 2, 2009
Can anyone help me in finding how to write the command in VBA to determine what Cell was selected in a worksheet? The objective is to know what Cell has been selected by double click event to pop up a userform with a calendar from which the user can select the date. I am looking at making it dynamic so I do not select a particular range.
Can this be achieved? I guess yes, but how?
View 9 Replies
View Related
Dec 16, 2009
I'm lost on VBA, but I have been successful at recording a few extremely simple macros. I have a number of pdf statements that I have run through OCR, and the OCR often misses the decimal point so that 43.85 comes out as 4385. (this is in dollars, so everything has 2 decimals).
These cells are usually pretty easy to spot, so I want to select that cell, press a keystroke or 2, and divide the value in that cell by 100. I assumed that by selecting "relative cell references", and recording a macro with the keystrokes "<F2>/100<HOME>=" (without the quotes, of course), I would accomplish that. But instead, it places a constant in that cell, with the value obtained in the cell where I recorded the macro.
View 9 Replies
View Related
Jan 5, 2010
I need to delete part of the row where one cell is selected. If more than 1 cell is selected, I want a msgbox. Example: I have any cell selected on row 26. I want to select all cells in this row including column C thru column AD. Column A & B are not to be deleted. After the selection is made, I want the row deleted and the below cells moved up.
View 3 Replies
View Related
Jan 30, 2006
I just want to run a macro when a certain cell is selected.
upon investigation, i have found that I can right click on the sheet tab and
view the code. I can then add the following
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Address = "$a$1" Then
run(macro1)
end if
End Sub
View 9 Replies
View Related
Mar 22, 2012
know if there is a way to tell and respond differently to how a cell is selected (i.e. mouse click versus arrow keys)? This stems from a desire to highlight selected cells when they are chosen. A previous post on some code I provided got me to this:
Code:
Private Sub Worksheet_SelectionChange(ByVal target As Range)
Application.EnableEvents = False
With target.Interior
Select Case .ColorIndex
Case -4142
[code]....
However, this highlights cells as the user moves around the sheet via arrow keys (like leaving a trail). What I need is for cells to highlight ONLY if they are left clicked on by the mouse.
View 3 Replies
View Related
May 30, 2012
I have a commandbutton which sends my selected row in an email to a recipient as a reminder that they need to act on information in the row.
When the function runs i want to to add a date that the reminder mail was sent in a specific cell on that selected row. However i am having trouble.
Cells(SelectedRow, "M").Value = %DATE%
I've tried some different things but i cant figure out how to handle the arguments for Cells() to point to my actual selected row.
View 2 Replies
View Related
Jan 25, 2007
I work with many sheets that have many data columns and have used a "greenbar" formula in conditional formating but would like to have a similar formula that highlights the current row. If possible, it would be nice if this new formula would not wipe out all other formatting as it moves.
I have seen Ivan's work at www.mrexcel.com/hof001.php but it says that it wipes out other formatting.
The formula that I am currently using is =MOD(ROW(),3)=2
Is there a way of getting the current row number so that it could be
=ROW()=(current row number) ?
View 9 Replies
View Related
Feb 13, 2008
I know how to select an entire row, but if I want the "row" with active cell to be highlighted when I press enter, or the down arrow key, is there a way to do that (mainly for ease of viewing).
View 9 Replies
View Related
Jul 18, 2006
I've seen plenty of code for running a macro when various events occur, but how do I run a macro when a cell is simply selected? I have a calendar Macro, and there are two cells that need date input. I want the user to select the cell, and the calendar to pop up. Macro for the calendar works correctly, just need the code for the activation upon cell selection.
View 9 Replies
View Related
Sep 28, 2007
I would like to achieve the affect where if you click on the cell its contents will change. For example, if you click on it once, a checkmark will appear, but if you click on it twice and x and if you click on it a third time a - will be displayed.
I was thinking along the lines of a marco for the spreadsheet, which would run an if loop to check what was currently in the cell then change accordingly. Is there a command that would allow me to do this, or would is there an even easier way? side note how would I even display a checkmark of square root sign, through vba? This is what I have, It was working but now it does nothing and I cant remember what I tinkered with.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Application.EnableEvents = False
If Target.Column = 6 Then
If Cells(Target.Row, 6) = "" Or Cells(Target.Row, 6) = "-" Then
Cells(Target.Row, 6).Formula = ""
Application.EnableEvents = True
ElseIf Cells(Target.Row, 6) = "?" Then
Cells(Target.Row, 6).Formula = "x"
Application.EnableEvents = True
Else
Cells(Target.Row, 6).Formula = "-"
Application.EnableEvents = True
End If
End If
Application.EnableEvents = True
End Sub
View 2 Replies
View Related
May 9, 2008
My task is to create a sub-routine that filters a column to the currently selected value while capturing the column header for use in a second sub-routine that finds the corresponding column in the second worksheet and filters it using the value from the first worksheet
View 2 Replies
View Related
Feb 10, 2014
I have a number of pictures on sheet 1 that display names from cells in sheet 2
E.g.
Cell B1 in Sheet 2 has the value "Bob Jones"
Cell B2 in Sheet 2 has the value "Ian Jones"
In sheet 1 Picture1 has the formula =Sheet2!$B$1 so that the picture displays "Bob Jones"
Picture2 has the formula =Sheet2!$B$2 so that the picture displays "Ian Jones"
I have about 30 pictures displaying names in this way, but I want the name of the chosen picture to also appear in cell A1.
E.g. On sheet 1 user clicks on Picture 1 (Bob Jones), the name "Bob Jones" appeas in Cell A1
User clicks on Picture 2 (Ian Jones), the name "Ian Jones" appeas in Cell A1
View 1 Replies
View Related
Apr 1, 2014
I am running the below macro which work fine ! However after running the macro, I do not stay in the cell I was!! How to stay in the selected cell?
HTML Code:Â
Sub INSERT()
ActiveSheet.Unprotect Password:="P@ssw0r!"
ActiveCell.EntireRow.INSERT
Range("FORMULA1,FORMULA2,FORMULA3,FORMULA4").Select
Selection.Locked = True
Selection.FormulaHidden = False
ActiveSheet.Protect Password:="P@ssw0r!", AllowFormattingCells:=True
End Sub
View 1 Replies
View Related
Apr 2, 2014
i have data in range c10:h100
i want if select a cell e.g = c15 then
highlight the range c10:c100 with color
now highlight the all row only highlight defined range
View 5 Replies
View Related
Jun 3, 2014
I am trying to create a button that when clicked it will add a character to the existing cell. Eg if cell had LDs and I click button I like it show LDsâ‚‚
The â‚‚ is character code 2082.
View 5 Replies
View Related
Jun 12, 2008
I have a worksheet with lots of data on it, resulting in a very busy layout. I have been using "FIND" to search for various numbers within the spreadsheet, however often times it is hard to see which cell "FIND" selects.
Is there a way to enable Excel to highlight the selected cell? For example could "Find" turn the cell yellow when it finds a match?
View 14 Replies
View Related
Dec 17, 2008
I have a user form containing a calendar. What I'm trying to do is that if any cells are selected in a range - D4:E83 - then I want to run the userform therein forcing the user to use the calendar and ensure the date is correctly formatted.
The userform is named frmCalendar.
View 5 Replies
View Related
Dec 23, 2008
I want to use the Worksheet SelectionChange event to update part of my worksheet/UI depending on what cell(s) the user has selected.
As an example, if I have two named ranges - $A$1:$B$10 and $C$1:$D$10 - I want to detect whether the user is in range 1, range 2, or neither, then update elements of the UI.
View 4 Replies
View Related
