I'm working on a report for current project where many of the cells are named. I'd like to do a one off print of the report, just to use as a reference map, where the named cells are displaying their respective names. Not all cells on the sheet are named, so I don't want EVERY cell label to be shown, just the named ones.
I have some dynamic named ranges in sheet1, and in sheet2 I have data validation dropdown list which has the names of all the DNR's in it.
What I want it to do (in sheet3, no less) is for the user to be able to pick a named range from the dropdown list, and have a particular column in sheet3 then display that entire named range.
I have made a 'data' worksheet which is the source for the data validation in sheet2. Each item in the list identically matches the name of each of the named ranges. I was hoping to be able to use some form of =INDIRECT but alas, no such luck.
So it's almost like a copy and paste function I'm after, where:
If you pick "Schedule_From" out of the DD-list, then DNR 'Schedule_From' is what is pasted in Column B in Sheet3.
DON'T want to use a PivotTable.
I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select
i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop
I have 2 problems relating to LOOKUP.
Not sure if Excel can perform these calculations as they could get to complex.
Problem 1
Can it be possible to have excel look at data from one cell reference another cell then display the results from the cell next to it in another cell, sort of example:
Tab 1 (Never changes)
AB
Bob1
Jon2
Fred3
Tab 2 (Dynamic, changes each week)
AB
Jon
Fred
Bob
So it would work as follows.
Tab2 column B will take Tab2 column A’s data check Tab1 column A and display Tab1 column B’s result.
Problem 2
Weekly league rank table that shows position movements week by week
Example.
Week1
1Jon
2Bob
3Fred
Week2
1FredUp 2
2BobNot Moved
3JonDown 2
Can Excel calculate/show the actual movements of league positions?
I have a sheet where i have many differently named areas (like state1_1 and state1_2) When I doubleclick on a cell then a macro should run with following criteria: 1) Macro will run if the doubleclicked cell is part of any range in the list. Here I mean that names of ranges which belong to that list start with word state (like state1_1 and state1_2). No other ranges should not be in that list. If the cell is not in the range that is part of the list, then nothing should happen.
View 2 Replies View RelatedExample:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
Sheet1 is a list of names, then a few columns of numbers.
Sheet2 contains calculations based of the numbers in sheet1.
Each sheet from 2 on is names after the names in sheet1 column A...
A large cell at the top of each sheet contains the formula to display the sheet name:
=MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,255)
So what I want to do now is...
in cell, look for the cell in sheet1, and display the value in the cell offset by X so i can bring the numbers from sheet1 over.
In plain english the cell would say like...
"look in sheet1 for "Name" then display the cell next to it"
I know to look in the next sheet its "=Base!B2" if i wanted b2 on sheet base.
I know to use "=OFFSET(Base!B2, , 1, , )" too look at B2 and go right 1 column.
But the issue is i dont want Base!B2.. i want whatever cell in Base column A that has the text that A1 has.
If a cell is not blank, then increase that amount by a percentage identified in another cell and display the value only without any formalas in a new cell. To this end I wrote this IF statement:
=IF(I2>0,CP9=(CA9*I2/100)+CA9,CP9="")
Observation: I see a FALSE in CS9 where this IF statement exists, however, CP9 does not display the required value.
I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...
I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.
P.S. I have excel 2010 and windows 7
I have Excel 2000, recently when I format a cell to display mm/dd/yyyy and enter mm/dd/yy, it is displaying dd/mm/yyyy. Or it starts out correctly and during a future opening of file it displays incorrectly.
View 2 Replies View RelatedWhen inserting "1" in the cell under soup, i was thinking it will bring up a list of its ingredients and how much of that ingredient. The values are listed in the same spread sheet below.
The amount of the ingredient is in D50 (80grams) and the item type next to it in E50(onion)
Is it possible to put in "1" soup then it displays all the items in both those cells range example(D50-E50 to D60-E60)?
Is it possible to put the value "2" in soup and it shows double the measurements? example (160grams) (onion)
I have a huge database. I am looking for a macro that can search for a particular word. If a match is found, the macro should do two things simultaneously... (i) delete the contents of the cell in which the match is found........(ii) display the same contents 1 row below and 1 coloumn to the left of this cell where the match is found. For e.g....
View 9 Replies View RelatedI wrote an IF AND formular to display "Yes" for a cell with zero. but when the cell is also empty, it still returns a "Yes" instead of empty.
this is the formular:
=IF(J2=3,"Yes",IF(AND(E2="",I2=0),"Yes","No"))
when I2 = 0 it returns Yes
Also with I2 = "", it still returns "Yes" instead of "No"
I have data arranged in cells A1 to Z1 as Name1, Amount1, Name2, Amount2, Name3, Amount3, etc. Is there a formula that can determine the name that corresponds to the maximum amount in the row?
View 7 Replies View RelatedI want to display the contents of cell B5 in A7 by using cell C7 to show the location of the cell to be displayed. Cell C7 has a formula that shows the cell location of information (text) that needs to be displayed. How can I show in A7 the contents of cell reference shown in C7? In figure attached I show an example to better understand. Want in A7 to show the contents of B5 by reading what is in C7. So A7 cell should show word Road.
View 3 Replies View RelatedI am trying to create a table, based on what people predict in sports games. I have most of it in place, but I have hit a brick wall where one part of it is concerned. For example, cells M43:M56 have the scores for each week of what one person predicted., so it could be 2,5,7,2 and so on. What I then need the table to do is determine which round or week it is and display the relevant score. So based on the above let's say it's round 3, and his score would be 7 for the week, and the cell to the right of this shows the week's score plus his total score so far.
View 2 Replies View RelatedI have about 20 named ranges, and I have a formula that spits out the name of the range I would like to be displayed. So, for instance, in cell A1, it says "Red1" (the words are created by a formula though). I want the data to change to the new data if A1 changes to say "Red2". The problem is that when I refer to the contents of cell A1, it will not use the contents as the named range. This was a little difficult to word so if you don't understand what I am saying just ask.
View 3 Replies View RelatedLet's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
I have a workbook defined name ("Moving_Cell") that returns the cell address of another named cell ("Ending_Balance") that moves around in a worksheet.
Right now I have a macro which includes:
Range("L39").GoalSeek Goal:=0, ChangingCell:=Range("Interest_Rate")
I want to substitute the hard-coded "L39" with the cell address determined by the formula in my workbook defined name "Moving_Cell" but I can't seem to get the syntax correct.
I'm trying to find a way to display the latest stage that my processes are in, in a specific cell. Looking at the attachment, basically I need to display in cell E2 that my "Process 01" is in "STAGE AB" (because that is the latest stage populated with the achievement date). So similarly, for row 3, it should state "STAGE L".
View 3 Replies View RelatedI have several hyperlinks that may or may not contain data, the linked cell will display "0" if there is no data. When I print I dont want the "0"s printing.
How do I make the cell display nothing when a hyperlink cell is nothing?
excel help.jpg
Basically it is a training matrix.
basically I need A30, A32, A34 and A36 cells to display the characters they are currently displaying but when i copy and past any of them into a new cell on the matrix for example into cell B11 I want to be able to SUM the total of that column and display it in cell B24
So to recap, I would like A30, A32, A34 and A36 cells to hold 25, 50, 75 and 100 as there value but this can not be displayed it is just a value which i can use to calculate.
I am ok if i have to link the cells with another worksheet but i have tried doing this also i dont know if i need to use VBA.
Let me see if I can make this succinct and clear. Cell AQ2 (where the formula below resides) looks at the value in cell E2. It then references table $K$3:$U:$100 on sheet "LookupTables" to get the value to display. It does this (and works great) with the formula below:
Code:
=IF(ISNA(VLOOKUP(E2,LookupTables!$K$3:$U$100,7,FALSE)),"",
IF(VLOOKUP(E2,LookupTables!$K$3:$U$100,7,FALSE)="","",
VLOOKUP(E2,LookupTables!$K$3:$U$100,7,FALSE)))
I would like to add one more argument. I would also like it to reference cell U3 in the LookupTables sheet and if there is anything in that cell to go ahead and complete the formula, but if there's no value in that cell, it should return no text and be blank
How would I get a particular cell to display the contents of any cell that might be selected.
ie, if I click on A1 I want A2 to display the info thats in A1, and if after that, I click on E12, I want A2 to then show E12's info, etc etc.
What I want to do is very similar to a Data Validation message, where a message pops up when you select a the cell. I want that message to be the value of another cell in the same worksheet.
I would also be open to a solution where you simply mouse over a cell to see a comment/message.
I found some code that is working great, but I'd like to add some functionality to it if it can be done. When a cell is clicked in Column G it is displaying a % found in Column F in the same row as G under the cell similar to a comment without using the comments option. The problem I'm finding though is that if Column F is hidden then it is not displaying the results in the cell found in Column G. Here is the
Option Explicit
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim Row As Integer
Dim Amount As String
Row = ActiveCell.Row
Amount = Range("F" & Row).Text
Basically I'd like to know if it is possible to show the comment in G if the Cell it is trying to reference is hidden.
i have a userform with a text box in it a i would like to display all the values in a named range called "emp1"
View 4 Replies View RelatedAttached is an example of what I'm looking for. Example: Column A has all the month names with a defined named range of crnt. D6 has a data validation display with a value of Nov 09, I need E6 to display Oct 09 automatically from the data in Column A. Basically I need cell E6 to always display the previous months text based off cell D6. I think the example sheet explains it better.
View 2 Replies View RelatedCan I stop the displaying of the name of the named area when I am zoomed out of a worksheet? I can not see an option on the Tools > Options > View menu.
A workaround, found by accident, is to make the named area have more than one area.
I'm in receipt of a multi rows date and time csv file exported from non Excel software:-
The cell displays as 17/01/2014 20:53
Yet the edit cell displays as 17/01/2014 20:53:41
I tried formatting the cells to dd/mm/yyyy hh:mm.00 but that returns all the seconds to .00 and I have tried many Google suggestions but none have worked.
How do I get the cell to display all the information?
