Attached is an example of what I'm looking for. Example: Column A has all the month names with a defined named range of crnt. D6 has a data validation display with a value of Nov 09, I need E6 to display Oct 09 automatically from the data in Column A. Basically I need cell E6 to always display the previous months text based off cell D6. I think the example sheet explains it better.
View 2 RepliesI am using the following formula to show the first day of previous 6 month cycle.
=DATE(YEAR(TODAY()),MONTH(TODAY())-6,1)
That formula would display: 07/01/2009
I want to have another formula show the last day of the previous month.
Basically it would display: 12/31/2009
I have some dynamic named ranges in sheet1, and in sheet2 I have data validation dropdown list which has the names of all the DNR's in it.
What I want it to do (in sheet3, no less) is for the user to be able to pick a named range from the dropdown list, and have a particular column in sheet3 then display that entire named range.
I have made a 'data' worksheet which is the source for the data validation in sheet2. Each item in the list identically matches the name of each of the named ranges. I was hoping to be able to use some form of =INDIRECT but alas, no such luck.
So it's almost like a copy and paste function I'm after, where:
If you pick "Schedule_From" out of the DD-list, then DNR 'Schedule_From' is what is pasted in Column B in Sheet3.
DON'T want to use a PivotTable.
I have about 20 named ranges, and I have a formula that spits out the name of the range I would like to be displayed. So, for instance, in cell A1, it says "Red1" (the words are created by a formula though). I want the data to change to the new data if A1 changes to say "Red2". The problem is that when I refer to the contents of cell A1, it will not use the contents as the named range. This was a little difficult to word so if you don't understand what I am saying just ask.
View 3 Replies View Relatedi have a userform with a text box in it a i would like to display all the values in a named range called "emp1"
View 4 Replies View RelatedI have an excel document which I am trying to automate using VBA. I have two headings which have the same text every month but the month value must change.
Basically I’m looking for the last day of the previous month. So if it was 05th April 2007 I want to return 28 March 2007. I just need to obtain the last day of the previous month in the following format ’28 March 2007’.
I have a tiny problem with a bug in excel. You see, if you try to enter an empty range into a line graph you will error out. Well, I can't guarentee that the range will have at least one value in the macro so I was thinking that I would initalize a range varable (say ProductXRange) to an error message that reads: "ERROR: Selected Product Data is Not Available." Thus by guarenteeing me an entry no matter what. The question I have is because the string is not on a worksheet, how do I force it into the range varable (ProductXRange)? I.E. ProductXRange would in reality have one entry...the error massage.
View 9 Replies View RelatedI have 30 worksheets in a workbook in which the first sheet is called summary. The summary sheet has 29 formulas with all named ranges, so one named ranged per worksheet. The issue I have is when i clear old data and add new data every month, the named range changes on some worksheets not pointing to the correct range as previous month file even if I have $
I have a month number in H2 (1-12). I want a formula that will give me the previous month number. So, if h2 = 1. I need my formula cell to equal 12.
I've got a workbook set up. One tab has a bunch of named ranges, let's say Tables 1-6. The second tab has vlookups for selected values from a sharepoint data pull (in order to parse through the sharepoint stuff, most of it is nonsense).
What I am trying to do is write a formula for cell E2 that:
-Step 1: Looks into whichever range the user specifies, 1-6 (probably using the indirect function).
-Step 2: Searches the specified range for text found in cell F2 (a string of text with values from one or more of the ranges 1-6)
-Step 3: Returns the text.
Need to be able to highligh data within a range where the date in a column is for the previous month/s- therefore need to be able to also include in macro entering the current month - don't want to have to edit macro each month
View 2 Replies View RelatedI have a macro that saves a workbook with the month name automatically generated in the filename with the code below (apologies for the scrappy code, but I am rather new to VBA)
ActiveWorkbook.SaveAs Filename:= _
"I: EngineeringCapacity PlanningCapacity Report CONTROLS " & Format( Date, "mmmm") & ".xls" _
, FileFormat:=xlNormal, Password:="", WriteResPassword:="", _
ReadOnlyRecommended:=False, CreateBackup:=False
In another file I want to re-open this workbook. However, the problem arises because this will not happen till the next month, in order to update the new month's workbook with the old information. Currently I am 'cheating' by modifying the code with the actual month name, like this
Workbooks.Open Filename:="I:EngineeringCapacity PlanningCapacity Report CONTROLS April.xls" I have tried to use the Dateadd function (with a -1 as the add amount) but I have failed to make it work.
what formula should I use to refer to the last working day on the prioir month. I have trie to look up forums but no result os yet.
View 4 Replies View RelatedI have a speadsheet where I have a cell that reads a named range via OFFSET. The range consists mainly of numbers but a few cells contain the text UL (Unlimited)
The cell that "reads" the OFFSET is then used in another cell where it is multiplied by either 2 or 3 depending on user input.
The problem occurs where the cell attempts to multiply the text "UL" which results in "#VALUE!"
How can I have this cell with the multiplication bypass the multiplication and simply return the text "UL" in the case of reading text from the named range.
I have to do a calculation that uses the number of days of the previous month. Thought this would work but it doesn't.
[Code].....
I have a cell in which I will input the last day of a month (e.g., 1/31/09, 2/28/09, etc.) In another cell, I want Excel to show the last day of the previous month. Is there a formula to calculate this automatically?
I enter in Cell 1: 1/31/09
Excel calculates in Cell 2: 12/28/08
I enter in Cell 1: 2/28/09
Excel calculates in Cell 2: 1/31/09
I'd like to make a template so that when it is opened the previous month name is inserted in the sheet name. The reason I want to use previous month is that normally this report is created in the month following the month being reported. So it is opened, months are updated, then the user saves as xls. Ideally I guess sheet would not have the month on the template.
The name of the sheets are shortened months like "Dec Results Bob" and there are 8 of these.
I can tell it might start:
Private Sub Workbook_Open() (or would .xlt be the same?)
but that's about it. I made a macro of renaming sheet but that didn't really tell me if I could insert the Month there.
I want to display the value of the next row or previous row when click Next/Previous button. For example when I click next, report number will be = 789, category = valid, issue = mobile, then reference = reference 3. What code to use?
Refer to the attached file for screenshots : Sample.xlsx‎
How to write a VBA code so that it would calculate the date of the previous Friday and from there Return the date exactly 1 month before; on any given day.
For example...
today is may 8th
So if I run the code the dates returned for last friday should be 05/02/2014
and 04/04/2014 should be returned AS the DATE exactly a month from 05/02/2014
User Form Basics - Populating Text Boxes. A few tweaks later and its reading the data just fine. Some of the specific form objects and range names have changed, but it's the same logic.
Anyway, this isn't just for display. I need to export the data back to the spreadsheet. So, I plugged this line into the event handler for the "Save & Exit" button on the sample form in the other thread:
I have a number value in (e.g.) cell A1, and I want to display it in cell B1.
The number in A1 updates automatically from a website (and through a few regexp and other functions). Most of the time it displays a number, but sometimes it can be an error if for example the website connection doesn't work or something else is wrong.
I want to display the number of cell A1 in cell B1, but if the number in A1 is an error, I don't want to display an error, or a zero, or a dash, or anything of the sort you'd normally do, like =IFERROR(A1,"error"). I want to see the number there was in B1 before the error occurred. In other words I want to update the value of B1 only if there is a number to update with.
I have an issue whereby I have thousands of lines of data. I need to bring back the "previous month" worth of data (along with some additional information) but not sure how to go about this.
The attached shows the example file. I need the following :
1. Take the data to populate the "Populate" tab
2. Using Column F (Invoice Date Created) to only bring back the "previous month data" - in this case it would be May 2014
3. The following formula is what I have currently for Column B of the "Populate" tab: =SUMPRODUCT(SUMIFS('Data'!$N:$N, 'Data'!$M:$M, "Invoice Payment Processed", 'Data'!$A:$A, A2))
4. The above formula brings back all the values - I only want the previous month.
5. I am then not sure how to calculate Column C - which is a count of the amount of invoices that make up the total
I wrote some code that toggles bewtweeen the word "Yes" and the function clearcontents.
What it does not do, is if you click on cell A1 and change it's contents and you click on the same cell again it does nothing. You need to click on another cell say A2 before you can go and change A1 again.
My code is as follows:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("Documents")) Is Nothing Then
On Error Resume Next
Application.EnableEvents = False
If IsEmpty(Target) Then
Target.Value = "Yes"
Else
Target.ClearContents
End If
Application.EnableEvents = True
On Error Goto 0
End If
End Sub
Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
In my excel sheet i have few results displayed in range (same row different column with few banks cells in between). No i wish to display the most repeated value / result from that range into another cell on a different sheet of the same workbook. Can somebody help please.
Please note that the data (that is displayed in the cell rage from where i wish to get the most repeated one) is a the result of a nested IF statement.
16 minutes ago
I'm trying to have text in a specific column output a letter, only if every cell in a range of 4 contains the letter Y (yes). Using IF/SUMIF formulae I have managed to get he final cell to output the text, but it does it if ay one of the range of four cells contains the data, not all of them, which Is what is desired.
View 9 Replies View RelatedI'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
View 2 Replies View RelatedI need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies View RelatedI'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then
[valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
if I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,
View 9 Replies View Related