Display Named Range Contents Based On Text In Cell

Aug 24, 2009

I have some dynamic named ranges in sheet1, and in sheet2 I have data validation dropdown list which has the names of all the DNR's in it.

What I want it to do (in sheet3, no less) is for the user to be able to pick a named range from the dropdown list, and have a particular column in sheet3 then display that entire named range.

I have made a 'data' worksheet which is the source for the data validation in sheet2. Each item in the list identically matches the name of each of the named ranges. I was hoping to be able to use some form of =INDIRECT but alas, no such luck.

So it's almost like a copy and paste function I'm after, where:

If you pick "Schedule_From" out of the DD-list, then DNR 'Schedule_From' is what is pasted in Column B in Sheet3.

DON'T want to use a PivotTable.

View 9 Replies


ADVERTISEMENT

Display Contents Of Named Range On Userform

Oct 18, 2007

i have a userform with a text box in it a i would like to display all the values in a named range called "emp1"

View 4 Replies View Related

Display Previous Month Text From A Named Range

Nov 30, 2009

Attached is an example of what I'm looking for. Example: Column A has all the month names with a defined named range of crnt. D6 has a data validation display with a value of Nov 09, I need E6 to display Oct 09 automatically from the data in Column A. Basically I need cell E6 to always display the previous months text based off cell D6. I think the example sheet explains it better.

View 2 Replies View Related

Combine Cell Contents With Named Range?

Aug 8, 2013

I have a cell with a drop-down menu where the user can select "Plant A" or "Plant B".

I have a cell below that with a sales number, which comes from a different tab where the sales number is input and has a named range.

For example, the input tab has a named range called "Plant A Sales" and a value of 1234, and a named range called "Plant B Sales" with a value of 5678.

I want to put a formula in a cell that will look at the cell where the drop-down menu is and will populate that cell with the correct data for the selected plant.

So if the user selects "Plant A" from the drop-down menu, the cell will show "1234". If they then select "Plant B" from the drop-down menu, the cell will show "5678".

View 1 Replies View Related

Display Image Based On Contents Of Cell?

Feb 25, 2014

I have found Displaying an image based on text contained within a cell. which appears to be a very similar question, but no steps to follow.

Basically I have a folder with around 300 images in it, each is called ProductId number.jpg
eg Z99S1234567.jpg

In my sheet I am using the same ProductId number and would like to display the product image on the sheet. I have A1:D19 as spare space Lookig at the info I have found the image will have to go into a cell, so can I break all the rules and merge cells to fit the image in, or do I need to make a single cell big enough or can I use VBA to import the image somehow to a specific place on the sheet.

There will only ever be one looked up image on the screen at a time.

View 1 Replies View Related

VBA - Display Current Date Based On Contents In Neighboring Cell / No AutoUpdate

Dec 6, 2013

I have two columns, column Q and R. Column Q has Data Validation set, where you can only choose one of four options in any given cell between rows 2-250,000. When "Complete" is chosen, the cell turns green. Now when "Complete" is chosen in column Q, I need the cell next to it in Column R to auto-fill today's date. However, the date should not update to the next day. So if the cell autofills to today's date, which is 12/6/13, tomorrow, when the date changes to 12/7/13, the cell still reads 12/6/13.

View 4 Replies View Related

Display Contents(text) Of A Cell Referenced By A Given Cell

Feb 9, 2009

I want to display the contents of cell B5 in A7 by using cell C7 to show the location of the cell to be displayed. Cell C7 has a formula that shows the cell location of information (text) that needs to be displayed. How can I show in A7 the contents of cell reference shown in C7? In figure attached I show an example to better understand. Want in A7 to show the contents of B5 by reading what is in C7. So A7 cell should show word Road.

View 3 Replies View Related

Go To Range Based On Cells Contents/Text

Sep 5, 2006

I am just learning VBA. I need to move to a cell location that is named in a range. As follows:

The cell "Sheet2!A1" has a formula that results in "Sheet1!B3". I would like my VBA code to read that cell and select Sheet1!B3. When using something like:

Application.GoTo Range("Sheet2!A1")

I end up of course at Sheet!2A1. I want to end up at Sheet1!B3 or wherever the cell reads at the time the code is read and operated on.

View 9 Replies View Related

Clear Contents Of Named Range In 2007

Jan 4, 2009

I want to have users fill out. While it is possible to have it Read Only so that they always SaveAs I would rather put in a macro to clear the user input fields. I have done this in Excel 2003 and when I try using the same techniques in 2007 I get an Error 400.

I have all the cells (some are merged cells) in a named range and have the following code for clearing them.

View 3 Replies View Related

Look Up Text In Cell From Specified Named Range?

Jan 8, 2014

I've got a workbook set up. One tab has a bunch of named ranges, let's say Tables 1-6. The second tab has vlookups for selected values from a sharepoint data pull (in order to parse through the sharepoint stuff, most of it is nonsense).

What I am trying to do is write a formula for cell E2 that:
-Step 1: Looks into whichever range the user specifies, 1-6 (probably using the indirect function).
-Step 2: Searches the specified range for text found in cell F2 (a string of text with values from one or more of the ranges 1-6)
-Step 3: Returns the text.

View 2 Replies View Related

Text-to-Columns Delimiter Based On Cell Contents

Jan 12, 2012

I frequently review DAT files. These DAT files use a variety of characters as delimiters. I'm trying to devise a macro that will perform a text-to-column operation, using the content of a specified cell as the delimiter.

Here's my code, which uses - (ASCII 0254) as a delimiter:

Code:
With Sheet1
Range("A1", ActiveCell.End(xlDown)).Select
Do

[Code]....

Instead of having the delimiter hard-coded, I'd like my macro to use whatever character I enter into Sheet3.Range("i5") as a delimiter. That way, I can easily change my delimiter character as necessary.

View 4 Replies View Related

Find Text Based On Active Cell Contents

May 11, 2007

I have a workbook with 2 worksheets, A and B. Sheet A contains source data and sheet B a pivot table of this data. I want my user to click on a cell within the pivot table,click a button that runs a macro to find the instance of this value within Sheet A. I did record a macro but it did not work.

View 3 Replies View Related

LOOKUP Range Based On Contents Of A Cell

Aug 24, 2006

I want to be able to send out one master workbook with the fourteen ranges, and use a pull-down list (or anything else) so when the user selects a state, the proper lookup range will be used. In the attached abbreviated example, I want the lookups in Column B to refer to the state designated in B2. In this case, the VLOOKUP works correctly, since Colorado zip codes are in the ColZip range.

The people in Idaho or Oregon using this will only be working with their respective zip codes in ranges IdaZip or OreZip, so if they enter their state in B2, I would like the VLOOKUP to look in a different range. My whole idea is to only have one master workbook so I dont have to create one for each district office. Maybe Im thinking in a wrong direction altogether.

View 3 Replies View Related

Macro That Will Clear Contents Of Cell Based On Format Of Text In Adjacent Cell

Feb 18, 2009

Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.

View 2 Replies View Related

Expand Named Range Based On Cell Value

Jun 13, 2008

I have a workbook containing two worksheets - Sheet 1 being my "data entry sheet" and Sheet 2 is a sort of summary report containing multiple named ranges (all grouped according to similar values in a cell i.e. all cells containing 1-1 is named GRP1, all cells containig 1-2 is named GRP2). Basically, my workbook looks like this:

Sheet 1
A B C D
1 Lea Female 1-1 Lea Wells
2 Leo Male 1-2 Leo Anderson

Sheet 2
A B C D
1 Anne Thomas Female 1-1
2 John Doe Male 1-1

4 Jimmy Beads Male 1-2
5 Mary Fox Female 1-2

Hence, when I enter the data as shown in Sheet 1, Sheet 2 should look like this:

A B C D
1 Anne Thomas Female 1-1
2 John Doe Male 1-1
3 Lea Wells Female 1-1

4 Jimmy Beads Male 1-2
5 Mary Fox Female 1-2
6 Leo Anderson Male 1-2

View 4 Replies View Related

Display A Named Range

May 5, 2007

I have about 20 named ranges, and I have a formula that spits out the name of the range I would like to be displayed. So, for instance, in cell A1, it says "Red1" (the words are created by a formula though). I want the data to change to the new data if A1 changes to say "Red2". The problem is that when I refer to the contents of cell A1, it will not use the contents as the named range. This was a little difficult to word so if you don't understand what I am saying just ask.

View 3 Replies View Related

Display Picture Based On Text In Cell

Feb 28, 2008

Is It Possible To Embed Pictures So That When I Do Lookup A Code It Then Shows Me The Picture Of What It Is Im Looking For. Ie If I Was To Type In Kettle It Would Show Me A Picture Of A Kettle In The Next Cell?

View 3 Replies View Related

On Cell Selection, In Named Range, Clear Content Or Add Text If Empty

Jul 24, 2009

I wrote some code that toggles bewtweeen the word "Yes" and the function clearcontents.

What it does not do, is if you click on cell A1 and change it's contents and you click on the same cell again it does nothing. You need to click on another cell say A2 before you can go and change A1 again.

My code is as follows:

Private Sub Worksheet_SelectionChange(ByVal Target As Range)

If Target.Cells.Count > 1 Then Exit Sub

If Not Intersect(Target, Range("Documents")) Is Nothing Then
On Error Resume Next
Application.EnableEvents = False
If IsEmpty(Target) Then
Target.Value = "Yes"
Else
Target.ClearContents
End If
Application.EnableEvents = True
On Error Goto 0
End If

End Sub

View 3 Replies View Related

Display Text Value Only If ALL Cell In Range Contain Certain Letter

Sep 6, 2013

I'm trying to have text in a specific column output a letter, only if every cell in a range of 4 contains the letter Y (yes). Using IF/SUMIF formulae I have managed to get he final cell to output the text, but it does it if ay one of the range of four cells contains the data, not all of them, which Is what is desired.

View 9 Replies View Related

Repetitive Macros- Display The Contents Of A Range Of Cells In A Message Box

Dec 6, 2009

I have a work book with several (couple of hundred) buttons, which when clicked display the contents of a range of cells in a message box as shown below;

View 4 Replies View Related

If Cell Text Equals Cell Text In A Range Of Cells Display Value From Range Of Cells

Oct 4, 2012

I have the following formula that is supposed to grab a value from C2 and check for that value in a range of cells and if it matches it is supposed to display the corresponding value in another range of cells. What am I missing??

=IF(C2='Google Doc'!$B1122:$B1266,"'Google Doc!K1122:K1266'","Not OK")

View 9 Replies View Related

Display Cell X Of Range Based On Another Cell Number

Feb 18, 2008

I am trying to create a table, based on what people predict in sports games. I have most of it in place, but I have hit a brick wall where one part of it is concerned. For example, cells M43:M56 have the scores for each week of what one person predicted., so it could be 2,5,7,2 and so on. What I then need the table to do is determine which round or week it is and display the relevant score. So based on the above let's say it's round 3, and his score would be 7 for the week, and the cell to the right of this shows the week's score plus his total score so far.

View 2 Replies View Related

Determining If Cell Is Part Of Named Range And What That Named Range Is?

Aug 16, 2014

Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:

Code] .....

here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.

View 5 Replies View Related

Display Contents Of Visible Cell?

Feb 14, 2014

I'm looking for a formula that will display the contents of a cell location. In other words, I have a sortable list (example: A3 - C20, where column C cells contain either: "EEE", "FFF", OR "GGG"). If I sort by "FFF", it will only display rows with that criteria. I need a formula to place in C1 (above the list), that will display the contents of the top cell in column C of my list, reguardless of how it is sorted.

Similar to the subtotal formula, but with text.

View 6 Replies View Related

VLOOKUP Display The Contents Of A Cell

Feb 25, 2009

I have a field set up to display the contents of a cell (sheet 1) using VLOOKUP if a match is found in a separate worksheet (sheet 4). Here is the code I'm using:

=VLOOKUP(C:C,Sheet4!G:G,1,FALSE)

Is there a way, if there is a match, to display the contents of another cell of sheet 4 in the cell of sheet 1?

EX:
Sheet 1 C:C matches Sheet 4 G:G
Sheet 1 C:C displays I:I from Sheet 4

View 2 Replies View Related

Copy/Paste Cell To Named Range Named In Adjacent Cell

Sep 4, 2007

I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.

The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.

Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")

Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select

i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop

View 8 Replies View Related

Find Specific Text In Cell That Matches Range Then Display Specific Text?

Aug 5, 2013

I'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.

View 2 Replies View Related

Excel 2013 :: Making Numbers Display With Color Based On Text Inputted In Different Cell?

Nov 20, 2013

EXPENSE MASTER 2013 sample color.xlsx

I have numbers that will display in column G. I have payment types entered in column E. So if 'C FUEL','FA','C M/C', is entered in column E I want the number in column G to be red.

View 3 Replies View Related

Compare Cell Contents With Given Range Of Contents

Dec 30, 2013

I have attached a workbook stating my problem.

file1.xlsx‎

View 10 Replies View Related

Display Full Contents Of Lengthy Cell Upon Selection?

Jul 3, 2013

I am working with a catering form that someone else created at work. It has a drop down list of menu items available. Once an item is chosen, the item description pops up.

These descriptions are so much longer than anything else in the row (item name, qty, #, cost). Is there an option to make the full text temporarily visible by selecting the cell, and leave it cut off the rest of the time? I am trying to keep the form at one page.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved