I'm trying to find a way to display the latest stage that my processes are in, in a specific cell. Looking at the attachment, basically I need to display in cell E2 that my "Process 01" is in "STAGE AB" (because that is the latest stage populated with the achievement date). So similarly, for row 3, it should state "STAGE L".
View 3 RepliesI am attempting to have cells in Column 'U' deliver different drop-down menus based on the corresponding value in column 'D'. I have created 7 named lists:
List_117G
List_152
List_JMET
List_XBAND
List_PACWIND
List_VORTEX
List_ROVER
Those lists will be called up based on 7 values in column “D”:
“G”
“152”
“J”
“X”
“D/E”
“V”
“R”
So far I have only been able to get this to work for the first category “G”. When I change the value of column “D” from “G” to “152” I no longer get a drop-down. Here is the formula I am using in the List function of validation.
=IF(D6="G",List_117G,IF(D6="152",List_152,IF(D6="J",List_JMET,IF(D6="X",List_XBAND,
IF(D6="D/E",List_PACWIND,IF(D6="V",List_VORTEX,IF(D6="R",List_ROVER,)))))))
I am using the formula below to calculate the number of days left to do something, when there are no days left I want the cell to display "Begun" in red italic text. Is it possible to do that via this formula or is a macro needed? =IF(ISBLANK(E2),"",IF((E2-I2)<0,"",E2-I2-10&(" Days")))
View 3 Replies View RelatedI'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
View 2 Replies View RelatedI'm using Excel 2010 and I'm having troubles displaying hiding my column B if none of the cells of column A contains either "(Quasi Echec)" or "(Quasi Russite)" at least once.
PHP Code: [URL] ......
Below are my 3 attempts.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim c As Range
If Target.Column 1 Then Exit Sub
Application.EnableEvents = False
On Error Resume Next
[Code] ..........
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Sub GetUniquesInColA()
Dim rng As Range
Dim c
If Target.Column 1 Then Exit Sub
On Error Resume Next
[Code] .........
Code:
Option ExplicitPrivate Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim x As Long
Dim LastRow As Long
LastRow = Range("A65536").End(xlUp).Row
[Code] ...........
I'm trying to write an IF formula that will return a number if the word in the adjacent cell begins with a specific letter. Here's what I want to show:
City
01
Express
02
Overnight
03
So "C" would return 01, "E" would return 02 and "O" would return 03.
I am trying to identify some combination of formulas or functions that will allow me to adjust the cell reference within a function based on a value in another cell. For example, I have a series of values listed from cell C50 to cell W50. I want to use a function to calculate the internal rate of return over a range of the cells: =IRR(C50:W50)
So far, so good.
However, I want the size of the range to be determined by a value entered in another cell, let's say B2. If the value in cell B2 is "5", I would want the formula to consider only the first five columns: =IRR(C50:G50). If the value in cell B2 is "10", I would want the formula to consider only the first ten columns: =IRR(C50:L50).
I am trying to run a VLOOKUP that allows me to reference all text (which can vary in length) in a cell up to the first '' from the right of the string. Also note that the master table of data being retrieved from is in another workbook. For example:
TestSalesDealsPlans - I just want to reference Plans (5 characters up until but not include '')
TestSalesDealsOrder Management - I just want to reference Order Management which obviously has more characters than the above example 'Plans' (16 characters up until but not include '')
I am fairly certain I will need to nest several functions such as RIGHT, VLOOKUP, MATCH, INDEX, etc but just not sure the most effective way to go about this.
My last post here was brilliant, I was very close to figuring the problem out myself (I'm learning) and the help I got here really was useful to help me finally get what i wanted to work.
Unfortunately, this request isn't so simple, as I haven't a clue what to even search the forum for to help me with this.
I have attached a simplified example to try and explain what i would like to happen.
Sheet1 holds information which is regularly updated, so the number of rows can vary, as the number of customers vary.
I want to produce a management report from this data, with a specific layout.
I have put the layout into Sheet2 - the cells highlighted in yellow are there simply as a reference to show the cell from which column would go where.
I produced the top report, by filling the cells with =and then clicking on the cell on sheet1 that I wanted displayed there.
I thought that if I then selected the table and filling down, it would produce the same layout table for all the other rows - but I was wrong.
Another problem is that, this report is needed to be entirely automatic, so I don't want to fettle filling down cells for the number of rows. I will need it to count the number of rows in Sheet1 and produce a report in the specific layout for each company in sheet 2.
It may be an option to use a button create the report, to save the report into a new workbook with automatic file name containing the date and also print a copy out automatically on the default printer.
I don't know how to go about this task at all, so I would really appreciate some help, even if it is pointers for what i should be searching the forum for!
I want to automate the process of updating my football stats and have delved into getting my data from the web. I have managed to import a football league onto my "standings" sheet but I want my "strengths" sheet to read it's values from this new "standings" sheet.
The "standings" sheet is broken down into 2 tables (home & away) one above the other.
The values I want are Home Games, Away Games, Home Goals For, Away Goals For, Home Goals Against And Away Goals Against from both the home table and the away table. The main problem I have is that the cell information I need is likely to change as I update the league tables from the web. So say one week Team A's data is in row 7 the following week it could be in row 8 so i need the data to correlate with the team name cell in my "strengths" sheet.
So at the moment Atromitos Home games (cell B8 on my strengths sheet) needs the value from cell C8 on my "standings" sheet but by next week it could need the value from C9.
Ps I am assuming that I can just just hit the refresh button on the ribbon and the data from the web site will update. Is this correct?
I have number in cell (A1) = 100. when I enter number in any cell of column(B) for example (B1)=10. then in cell (C1) the result of (A1) - (B1) = (90) and if I add in cell (B2)=10 then in cell (C1) the result of (A1) - (B1+B2) = 80 .accumulatively in cell (C1). and any number in column (B), the result will be (A1) minus any number in column(B) accumulated in (C1)
second question
I have number in cell (A1) = 100. when I enter number at cell (B1) = 10 then the result would be in the adjacent cell (C1) = (A1) - ( B1) = 90 and If I enter a new number in cell (B2) = 10 then the result would be in the adjacent cell (C2) = (A1) - (B1+B2) = 80 and If I enter a new number in cell (B3) = 10 then the result would be in the adjacent cell (C3) = (A1) - (B1+B2+B3) = 70 and so on. I want the result to be add automatically to adjacent cell in column (C)
I have drop drown menus that allow you to select 1 of 3 choices and based on those a second set which lists the options for the first three (subset). Now depending on the second value I need to pull a set of x y coordinates that can be of varying length. '
Example
Drop down menu 1 1560, 1669, 1554. Drop down menu 2 1560-1,2,3,4 1669-a,b,c,d. This has been done now lets say I select 1560-1. I need the following to be pulled from a list, the data is a block.
1.00 1.543
1.23 -1.25
0.54 -2.75
This can be of any length.
There are 11,000 rows and 4,000 are unique. The goal is to merge the data down to the 4,000 records. Each of the unique entries shows up 1 to 15 times.
In trying to solve this, I wonder if I should break this down into the different # of occurances and implement specific solutions. e.g., There are
5700 entries that show up 2x
504 that show up 3x
24 that show up 12x
I have 2 problems relating to LOOKUP.
Not sure if Excel can perform these calculations as they could get to complex.
Problem 1
Can it be possible to have excel look at data from one cell reference another cell then display the results from the cell next to it in another cell, sort of example:
Tab 1 (Never changes)
AB
Bob1
Jon2
Fred3
Tab 2 (Dynamic, changes each week)
AB
Jon
Fred
Bob
So it would work as follows.
Tab2 column B will take Tab2 column As data check Tab1 column A and display Tab1 column Bs result.
Problem 2
Weekly league rank table that shows position movements week by week
Example.
Week1
1Jon
2Bob
3Fred
Week2
1FredUp 2
2BobNot Moved
3JonDown 2
Can Excel calculate/show the actual movements of league positions?
I want to call a macro with a varying name that is within a module with the same name.
I have a module called Test1 and within this, a macro name called test1
I have a module called Test2 and within this, a macro name called test2
etc
On another module called Test8 (with the macro called Test8), this Test8 macro will call either Test1 or Test2 or Test3 etc depending on what I choose in an excel spreadsheet. So on sheet1, cell A1, there is a drop down with the options Test1 or Test2 or Test3 etc.
The following works to run the macro test1 from module test1 (when it does not vary i.e. i physically put in the name of the macro myself):
Sub Test3()
Test1.Test1
End Sub
The following works to run the macro test2 from module test2 (when it does not vary i.e. i physically put in the name of the macro myself):
Sub Test3()
Test2.Test2
End Sub
etc
However, if I try it so that the calling of the macro varies as below , it does not work:
Sub Test3()
MacroToCall = Sheets("Sheet1").Range("A1").Value
MacroToCall.MacroToCall
End Sub
Example:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
Sheet1 is a list of names, then a few columns of numbers.
Sheet2 contains calculations based of the numbers in sheet1.
Each sheet from 2 on is names after the names in sheet1 column A...
A large cell at the top of each sheet contains the formula to display the sheet name:
=MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,255)
So what I want to do now is...
in cell, look for the cell in sheet1, and display the value in the cell offset by X so i can bring the numbers from sheet1 over.
In plain english the cell would say like...
"look in sheet1 for "Name" then display the cell next to it"
I know to look in the next sheet its "=Base!B2" if i wanted b2 on sheet base.
I know to use "=OFFSET(Base!B2, , 1, , )" too look at B2 and go right 1 column.
But the issue is i dont want Base!B2.. i want whatever cell in Base column A that has the text that A1 has.
If a cell is not blank, then increase that amount by a percentage identified in another cell and display the value only without any formalas in a new cell. To this end I wrote this IF statement:
=IF(I2>0,CP9=(CA9*I2/100)+CA9,CP9="")
Observation: I see a FALSE in CS9 where this IF statement exists, however, CP9 does not display the required value.
I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...
I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.
P.S. I have excel 2010 and windows 7
I have Excel 2000, recently when I format a cell to display mm/dd/yyyy and enter mm/dd/yy, it is displaying dd/mm/yyyy. Or it starts out correctly and during a future opening of file it displays incorrectly.
View 2 Replies View RelatedWhen inserting "1" in the cell under soup, i was thinking it will bring up a list of its ingredients and how much of that ingredient. The values are listed in the same spread sheet below.
The amount of the ingredient is in D50 (80grams) and the item type next to it in E50(onion)
Is it possible to put in "1" soup then it displays all the items in both those cells range example(D50-E50 to D60-E60)?
Is it possible to put the value "2" in soup and it shows double the measurements? example (160grams) (onion)
I have a huge database. I am looking for a macro that can search for a particular word. If a match is found, the macro should do two things simultaneously... (i) delete the contents of the cell in which the match is found........(ii) display the same contents 1 row below and 1 coloumn to the left of this cell where the match is found. For e.g....
View 9 Replies View RelatedI wrote an IF AND formular to display "Yes" for a cell with zero. but when the cell is also empty, it still returns a "Yes" instead of empty.
this is the formular:
=IF(J2=3,"Yes",IF(AND(E2="",I2=0),"Yes","No"))
when I2 = 0 it returns Yes
Also with I2 = "", it still returns "Yes" instead of "No"
I have data arranged in cells A1 to Z1 as Name1, Amount1, Name2, Amount2, Name3, Amount3, etc. Is there a formula that can determine the name that corresponds to the maximum amount in the row?
View 7 Replies View RelatedI want to display the contents of cell B5 in A7 by using cell C7 to show the location of the cell to be displayed. Cell C7 has a formula that shows the cell location of information (text) that needs to be displayed. How can I show in A7 the contents of cell reference shown in C7? In figure attached I show an example to better understand. Want in A7 to show the contents of B5 by reading what is in C7. So A7 cell should show word Road.
View 3 Replies View RelatedI am trying to create a table, based on what people predict in sports games. I have most of it in place, but I have hit a brick wall where one part of it is concerned. For example, cells M43:M56 have the scores for each week of what one person predicted., so it could be 2,5,7,2 and so on. What I then need the table to do is determine which round or week it is and display the relevant score. So based on the above let's say it's round 3, and his score would be 7 for the week, and the cell to the right of this shows the week's score plus his total score so far.
View 2 Replies View RelatedI have several hyperlinks that may or may not contain data, the linked cell will display "0" if there is no data. When I print I dont want the "0"s printing.
How do I make the cell display nothing when a hyperlink cell is nothing?
excel help.jpg
Basically it is a training matrix.
basically I need A30, A32, A34 and A36 cells to display the characters they are currently displaying but when i copy and past any of them into a new cell on the matrix for example into cell B11 I want to be able to SUM the total of that column and display it in cell B24
So to recap, I would like A30, A32, A34 and A36 cells to hold 25, 50, 75 and 100 as there value but this can not be displayed it is just a value which i can use to calculate.
I am ok if i have to link the cells with another worksheet but i have tried doing this also i dont know if i need to use VBA.
Let me see if I can make this succinct and clear. Cell AQ2 (where the formula below resides) looks at the value in cell E2. It then references table $K$3:$U:$100 on sheet "LookupTables" to get the value to display. It does this (and works great) with the formula below:
Code:
=IF(ISNA(VLOOKUP(E2,LookupTables!$K$3:$U$100,7,FALSE)),"",
IF(VLOOKUP(E2,LookupTables!$K$3:$U$100,7,FALSE)="","",
VLOOKUP(E2,LookupTables!$K$3:$U$100,7,FALSE)))
I would like to add one more argument. I would also like it to reference cell U3 in the LookupTables sheet and if there is anything in that cell to go ahead and complete the formula, but if there's no value in that cell, it should return no text and be blank
How would I get a particular cell to display the contents of any cell that might be selected.
ie, if I click on A1 I want A2 to display the info thats in A1, and if after that, I click on E12, I want A2 to then show E12's info, etc etc.