Find Specific Text In Cell That Matches Range Then Display Specific Text?
Aug 5, 2013
I'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
I have a client list in a table in my excel sheet. I currently enter the clients in a sheet that looks similar to a form. After the clients info is in this Form I have a button with a macro to copy the client info into a table on another sheet. This works perfectly.
Now I have another form that will retrieve the customers info in a click of a button in order to make changes to the client. Ei:I now have a second phone number and I want to update that client's info. What I want to do from here is take the info in Cell B2 (clients full Name), Do a vLookup in the "Saved Clients Table" in a Range within my table range. (Range: Saved Clients and the client's full name is in $A:$A and called "Clients Full Name" and once that name is found I need to select the cell in column C and the corresponding row.
This will allow me to copy the info in my form, Paste it in Transpose to the cell that is selected. (I already have that code)
Here are screenshots of what I am trying to accomplish. [URL] .......
Could you tell me how I can find a specific sentence within a cell that contains many sentences.
I want to find, "I am new." within a text that contains, "Hello I am Bob. I am new. I live in england."
I am currently using =+FIND(AB$1,$V2) where AB1 contains the sentence I am looking for and V2 contains the cell full of sentences. However this returns #VALUE! when the sentence is not found. I want it to return null.
I'm faced with receiving data for time, in a text format, as follows:
Example of possible cell contents...
20secs 40m20secs 2h40m20secs
I'm not interested in the secs value but need to isolate the h (hours) and m (mins) values to use in another formula as numbers. The time could be shown in either of the above formats with either; (a) just secs, (b) mins & secs or (c) hrs, mins & secs... and of course the hours or mins values could be 1 or 2 digits in length. How can I determine (using formula only, not vba) what the values for hours and/or mins are dependent upon what is present?
I have a worksheet with several columns. I need a formula to search column D only and each time a specific location is identified to replace that location with alternate text. Example (ORIGNAL TEXT):
Column Dtext to text help.xlsx BIRD FISH DOG BAT BUG
I need to search that listing and each time the word BIRD is mentioned have it replaced with FEATHERS and each time DOG is listed have it replaced with TAILS Final result would look like:
FEATHERS FISH TAILS BAT BUG
All other text should stay the same and replacement text should appear in the cell of the text it is replacing. This is a sheet used by multiple people several times a day and so the Find/Replace option really won't work.
Have working on this for at least 6 months and it just isn't going to happen for me. I thought I could use a Conditional format, but that is producing no results either.
I have a picture on sheet 2. When I enter the text "htfo" without the quotes into cells a1 on sheet 1 , i would like the picture to be displayed for 5 seconds and then exit the picture and return me to sheet 1.
Now, I want every time to take the part of the text says "TER:something..." (part of which is date, but not every time with the known format dd-mm-yyyy, as you see here is yyy, followed by something else, with parenthesis here and maybe more data) and copy it in a new cell..., e.g:CO Column, same Row...
Above and every field which by the way is formatted as General (and it is text mainly) are made by merging older excel fields where data laid here and there, that's why you see the commas...with the method of a module with the following code:
Function MyMerge(Rng As Range) For Each Cell In Rng Temp = Temp & Cell.Value & ", " Next Cell Temp = Mid(Temp, 1, Len(Temp) - 2) MyMerge = Temp End Function
Note1:Records with the above string (TER:dd-mm-yyy) are 771 from 6469. Note2: As an alternative solution I can see an extraction of the TER:dd-mm-yyy string and the copy in a new place, like the:CO Column, same Row...
So I have a column that will have the same text in all of the cells contained within it except for one cell. Is there a formula that I can use that will automatically find and transpose the text of the one cell that is unique out of the column? I was thinking of an IF function, but the column could be up to 60 cells in length.
I tried to writer my code myself but I have a long way to go. Here is what I must do for my case:
I want a macro to find the row that include a specific text (For example "SMSC") in a range (A1:A100) then copy this entire row below the cell which has the value "OTHERS". That is, if there are 10 pieces of "SMSC" so these rows including "SMSC" should be listed below the cell "OTHERS"
I have a table that contains various aspects of information about customer cases, and I want to replicate a user 'picking up' the case by a simple press of a button. Users have access to only one Country, so I want to be able to search a particular column for the lowest value, but check that the Country for that row matches the user's access. If it doesn't, I then want to find the next lowest value in the column, and this is what's perplexing me??? As mentioned, I want to click a button to trigger this, and therefore want to use VBA code.
Set rFound = Sheets("ProductCount").Rows(14). Find(What:=sProduct, LookIn:=xlValues, SearchOrder:=xlByRows, SearchDirection:=xlNext)
ProdRow = rFound.Column
where sProduct contains values such as SW , CO. Now, when I use rFound to query SW, it finde me this first occuring SW. I have this inside a for loop. When it goes and queries again, it should get me the next occuring SW, not the first SW that it searched for me.
In the attached sheet I need to check on the Destination in column B, and if it matches set criteria, divide the figure in Column E by 2. eg If LAX is the destination, then for any rows directly under LAX until the next destination appears, column E needs to equal column D divided by 2. If the Destination is not LAX, then Column E equals Column D.
the difficulty I am having is that there can be a variety of row numbers for each destination. I am having trouble creating a formula that can basically work backwards from Row-1 in column B until it gets to a text string, and check that text string against the criteria. so it may be row -1 up to about row -9 dependant on the number of flight times available to each destination throughout the week.
How would I pull only a specific word from a text cell? If you see my example, in one column I have various job titles. If A2 contains "Manager", then in B2 return "Manager. If A1 contains "Coordinator", return "Coordinator. Etc.
I need a macro that will look for a specific text string in the tab names of the workbook and replace it with a new specified text string (leaving the rest of the existing tab names). In other words, a simple find/replace but applied to all tab names in the workbook rather than cells. Ideally, I'd like it to pop up something and ask for the text to find and the text to replace it with, so I don't have to edit the macro itself each time I want to use it, but editing the macro each time is fine. Either way will be wonderful.
I have a workbook with multiple sheets named by month and year that I use to keep track of loans I work with at a bank. In these sheets I have info such as:
Column B = due date Column D = loan# A Column E = loan# B Column F = status Column H = followup needed (Columns A,C, and G aren't important for the current need)
What I am trying to do is create a main sheet (TRACKER) that all I will have to do is press a macro button and it will pull info for each loan that is in a pending status.
I need a macro that will search column F (Status) on all sheets and find each instance of "Pending" and once that is done, copy rows B,D,E, and H in each "Pending" instance and copy them to their designated area on my TRACKER sheet. After that is done I need it to continue to the next "pending" instance and do the same on the next available line on my TRACKER sheet.
The overall goal would be that everyday I can press the macro and it will repopulate the sheet with the current pending items (as each day I will change pending status' to complete and no longer need to track it the next day).
I already have the tracker sheet set up and ready to go with the spaces as follows: Column G&H = Merged cells where due date will need to go Column I&J = Merged cells where loan# A will need to go Column K&L = Merged cells where loan# B will need to go Column M thru S = Merged cells where followup needed will need to go
Is there a way to make a macro convert '1' to Yes and '0' to No? I have 2 columns (F and G) in a worksheet that contain the value of 1 or 0, but I need to convert them to Yes or No. I have tried some fo the samples but they pop up a msgbox which is not required.
is there a formula that will find a word in a sentence written in a cell and if present then enter specif text in another cell? for example, if the word "Hotel" appears in the sentence in cell A5 then put in the text "Hotel and subsistence" in cell B5...
I have a macro that converts all my PDF Purchase Orders to a text file and inserts the data/text horizontally into another document. However because the PDF's or the text within the PDF can be fomatted differently (that is on different lines etc) it therefore imports the information and it looks mis-aligned.I have attached a simple spreadsheet showing some sample text as it is imported and then below this how it should look like, all in line.
The range where the highlighted text in red is, is variable (but say nothing more than a variant of 10 columns). The text can also be Uppercase or Lowercase.So, I was wondering if there is macro code to find the "text" on various rows/columns and align it all in another column?
That does allow me to filter the output in Master, but ideally what I would want to do is not have to set aside 300 lines in the Master file for each of the Staff files. Conceptually, I'd like to have the spreadsheets Staff A, Staff B, etc. look for and export only lines which have data in them and then have Master bring those lines in automatically. This may not be possible, in which case your suggested solution is the best approach.