So i'm receiving a web query on a sheet that is taken from a table off the web. When this data gets extracted into the sheet, it populates as "$xxxM" in order to show that it is a certain million dollars. The problem is, I need to total all these numbers to display at the bottom of my report. So essentially, I am trying to configure web query to display as "number" as opposed to "$numberM" so it is easier to total.
View 1 RepliesUsing MS Query in Excel, I've created a simple query that pulls its records from an SQL dbase. Here's the statement:
SELECT uvVisit.FacilityListName, uvVisit.DoctorListName, uvVisit.Date, uvVisit.PatientVisitId, uvVisit.PatientLast, uvVisit.PatientFirst
FROM CPS.dbo.uvVisit uvVisit
WHERE (uvVisit.Date Between ? And ?)
ORDER BY uvVisit.FacilityListName
The query runs fine and prompts the user to enter beginning & ending date ranges for the visit date when executed. So far...so good...but, this requires me to manually insert a line in Excel above the 1st record and type in something like: "For Date Range: MM/DD/YYY - MM/DD/YY" to denote the date range that the qualified records fall into (something the user wants to see).
However, I'd like to find a way automatically preface and display in the report's output (perhaps as the 1st line of the report in Excel??) something similar to what I'm already typing, and have it pull the beginning and ending MM/DD/YY values from those supplied by the user in the parameter.
I'm trying to display a value both numerical and also in english (e.g display both 200 and two hundred, 259 and two hundred and fifty-nine and so on.)
View 3 Replies View RelatedIn col b10 I have a drop down list box with numbers
e,g, 10
12
14
16
18
Now I am seeking a formula that when say 12 is selected in B!0 a predetermined number is displayed in C10 I have attached an example
I have column h with address number.
I have column k with street name.
In column iv i have an x an number or it is empty.
What I want to do is press a button and it starts at iv10 read that cell if empty then read iv11 etc.
When it reads x in the cell then read next witch will be a number.
Example:
iv10
iv11
iv12
iv20 x
iv21 21
So I would get columns a - ae and rows 10 - 21 displayed and wait till i press button again then when i press button it starts
Example
iv22
iv23
iv89 x
iv90 68
then it would display a-ae 22 - 90
I would like to display a number as weeks and days. For example the number 8 needs to be displayed as "1w 1d" or the number 14 as "2w 0d"
I am able to use a formula such as =INT((C3)/7)&"w "&(((C3)/7)-INT(((C3)/7)))*7&"d" but I wish to preserve the formatting of a number so that I can add 2 or more numbers together.
I am hoping that there is a way of doing what I want using the Custom Category in the Format Cells dialogue box.
I maintain a class register in Excel to monitor student attendance. The first row shows the date of the class in the form dd-mm.
I need to identify all dates which fall on a Monday and thought that if I custom formatted a new row as "dddd" and enter the formula =DAY(cell ref) into the cells of this new row it would achieve this- I could easily spot the Mondays for the period under review.
What I'm finding, however, is that the formula seems to incorrectly state that 16th September 2008 is a Monday whereas it's actually a Tuesday- utterly bizarre!
I can get a fix simply by modifying the =DAY() formula by adding 1 to my formula [ie =DAY(A1)+1] but am wondering is this a "so called known issue" with Excel or has anyone else come across it? I have never previously come across this and consider myself to be an above average competency level user of the application.
I'm trying to create an Excel sheet to display MAC addresses in the following format -
00:00:00:00:00:00
However. the characters can be either letters or numbers. I've modified the "hh:mm:ss" template to accomodate the format I need, but it will not recognize letters for the obvious reason. Is there a wildcard character that I could use in this format or has anyone created a format that would meet my needs? If I can pull this off, it could mean a promotion.
I use hex2dec frequently and input with a hex 'E' such as 05e8 is misinterpreted as exponential notation. I can use =hex2dec("05e8") to get the correct value, but when the hex number is in another cell, I get the exponent assumption/ conversion (to 5 x 10e8), or a # NUM error if it is in quotes. This seems like a blatant problem but I've found no mention of it in searches or FAQs.
View 3 Replies View RelatedMy Problem is I have a workbook with multiple sheets with a possibility of a number between 2 and 999 occurring. I am looking for a formula that can display a table on the "total" worksheet for every ID number that has been entered and the number of times the ID number is displayed.
View 7 Replies View RelatedThey have a list of data numbers which are yy/#####/@@@@@ (2digit year/casenumber/alphanumeric code). Where some people have typed in the code wrong (6 or more digits in case number) we want to know is there a way of doing this.
Ideally I want something that says "If 9th character is a slash then yes, if not no" or "if 9th character is a number then yes, if not, no".
Example of data is (where we want third option highlighted as erroneous (6 not 5 numbers in middle)
09/56487/KFJT
09/42105/PLOUR3
09/002145/PLIFD
09/02145/ASDF
I want to automate the Display labels in my Charts using VBA Coding…
I would need to use this small code in Charts with different Scales as some of the Scales in my Data are in a very large Range close to Trillions so its not possible to have these as the Primary-Y-Axis Scale and therefore I would need to use the in-built Display label option which Excel provides..
However, I always prefer to have the scale in the Range of Thousands so the Max I can have in the Scale can be 10,000 so if there is any Number more than that or the Scale is going above than I would prefer that this gets auto-calculated to Multiply with the remainder and show appropriate Scaling.
For Ex:In this example My largest Number is 4500000000 which is 100 M..So I would want the scale to show 4500 and the Display label as X Millions..
So The Display Label would be different for different Ranges but the Max Scale preffered would be 10,000.
I am importing data from an access database that is continually refreshed. Some of the data that is returned to my Excel sheet is in binary, where a "0" represents an unchecked box on the database program and a "1" represents the same box, but with a check mark. I want to change the data so that when it is updated on my Excel sheet it is converted to text as either "Yes" or "No" instead of "1" or "0", respectively. I'm sure this is pretty elementary stuff but I have tried VBE and cell formulas and can't come up with an answer.
View 3 Replies View RelatedI am wanting to use Excel to perform a web query into an online database our company uses. One of the columns I am wanting to import contains numbers that are 20 digits long & they begin with 4 zero's. The problem is that when Excel imports the query, if I fprmat the cells & preserve the formatting, it cuts off the first 4 zero's & replaces the last number with a zero. Basically, it looks as if it is only importing 15 numbers. Is there a way around this ; is there a way to force Excel to import all 20 numbers? If I don't format the cells, it imports in the following format - 4.20017E+15
View 4 Replies View RelatedI have a formula which I have copied from one of your good selves and tried to adapt it. The formula is below. I a am getting #NA as my answer.
=SUMPRODUCT(ISNUMBER(FIND({"h","H"},B11:G11))*{0.5,1})
I have a person name in Colomn A and then 1 week B-G on a row and want to count number of days holiday.
I am wanting to create a validation rule so when two cells are added the together the answer must be less than or equal to 14:00 - otherwise a message box will appear
So for example if H7+I7 gives an answer of 13:00 in J7, that's OK, but if the answer is 15:00, the error box will appear. I know that data validation doesnt work on a cell that already has a formula so I'm hoping to use K7 for the Validation and then hide the column
I'm sure this can be done but I don't think I have the formula correct. What I am trying to do is add each day's total while displaying a positive number if the total exceeds 6000.
View 5 Replies View RelatedI have an MS Access query that contains a parameter. The parameter is a date field, and I have configured that in the Access query. If I run the query within the MS Access user interface, it prompts me for the paramater value as expected, and runs just fine. However, I want to connect to this query from within Excel as a data source.
I have created a connection to the Access file using ODBC from within Excel. In the MS Query window, I am merely selecting all of the fields resident in the MS Access query, and returning all values. In other words, there is no selection criteria in the MS Query. I have done this many times with Access queries that DO NOT contain a parameter, and everything works fine. However, in this instance, I need to pass a parameter through to MS Access in order for the query to run. At the moment, I get the "Too Few Paramaters...1 expected" error message. This makes sense, because I haven't figured out how to pass the paramater to MS Access.
Is there a way to structure this that does not involve VB code? If so, I'd love to know how. I have tried creating parameters in MS-Query with the same name, but although I get the prompt it doesn't connect with the Access query as the source for the parameter value.
If the solution requires using code, I'm good with VB Code in Excel...is there VB for Excel code that could make this happen?
Failing that, I guess there must be (I've seen a few in my search thus far) Access VB Code that can make this work. I'm very rusty using VB with Access, so this is my least favored solution. However, if this is the only option, keep in mind that I need to pass the paramater ultimately from a user who will initiate the process using Excel.
Need the query parameters which takes the date from the cell into the query. How should I modify my query if it needs to take the date from a cell?? The bold one date should be picked from one of the cell in sheet 2.
My query is this
WEB
1
http://fc-web-phl1-101.phl1:8090/gp/...runReport.y=12
Selection=15
Formatting=None
PreFormattedTextToColumns=True
ConsecutiveDelimitersAsOne=True
SingleBlockTextImport=False
DisableDateRecognition=False
DisableRedirections=False
I have a csv file on another drive on the network that i need to query. I believe that ms query would be the best way. I know that a DSN needs to be setup but this macro will be used by various users who wont know how to do that. thus I would like to create one via VBA every time the task needs to be run.
I haven't a clue how to do this and i need it to be explained to me in general terms with words of one syllable!
Is It Possible to use VBA Coding to Display An Image (Object),
And Un-Display or Remove that Same Image (Object) using a VBA Code?
Example:
I have a Mailbox Picture that I would Like to Show, but only when a cell's
value = 5. If the Cell's Value is not 5, then don't display the mailbox.
I'm trying to query a query in Access 2003, from Excel 2003.
The query in Access looks like:
AccessQuery: [SELECT VBAFunction(field1) FROM Table]
The query in Excel looks like:
ExcelQuery: [SELECT * FROM AccessQuery]
I use the following VBA code in Excel to excecute the query:
With ThisWorkbook.Worksheets(cDataSheetName).QueryTables.Add(Connection:=strConnection, _
Destination:=ThisWorkbook.Worksheets(cDataSheetName).Range("A1"), Sql:=strQuery)
.RowNumbers = True
.Refresh BackgroundQuery:=False
iResultRowCount = .ResultRange.Rows.Count
End With
When I execute this code I get the error message 'SQL Syntax Error' (Error 1004). When I remove the VBA function from the query in Access, it all works fine.
I created an Ms Excel Database Query to bring in data from MS Access. (versions 2002 of MS Excel and Ms Access). The query works fine initially. I can right click, choose Edit Query and change my criteria. Results are returned almost instantly.
My problem is that, once I save the workbook, or autosave happens, I get an error when I right-click to Edit Query: This query cannot be edited by the Query Wizard..
In order to get inventory data from our Incode database, I've been creating an output file with the extension .IRP Thinking that excel would not bring in this data from the .IRP file directly, I would then create a txt file of it with notepad. I've recently discovered that I can bring it in directly from the .IRP
The file being created is in this format:
IN Stock Status Report - 6385.IRP
The number portion, 6385 in the name will vary everytime I generate a new report. However the text portion will not.
Currently, I've recorded a macro the bring in the data to my excel spreadsheet.
But it will only bring in data for the set filename.
Is it possible to set parameters on a query but use a wildcard to return all instances? I have a query that I want to be able to set multiple parameters on but give the user the ability to select as many or as few parameters as they want to see. 2 of the parameters are number fields and 2 are text fields with no spaces.
View 4 Replies View RelatedI have tried different formula involving with decimal places.
If A1 has a whole number like 5141234 then the result would come out as a whole number =(A1-5148000)*1.000440935+48000
If A1 has three decimal places like 5142356.654 then the result would out as three decimal places
I was looking to have a Word for example 'Apple' but want it as a number e.g '10'. I want to use it so that I can add up the prices of items by just clicking on the name of the item. So If I want to add up 3 items e.g. an apple , a banana and a pear which all cost £10 each I want to be able to click all three items and get the total of £30 displayed in a certain box.
View 1 Replies View RelatedI'm working with a worksheet with one sheet per day of the month (we use a master, copy/paste, change the copy to the current month, and go from there). I've already got it to figure the dates based off (really difficult).
View 3 Replies View RelatedI have an XML file which I can open in Excel as an XML table. When I try to insert a chart from any of the data, a chart appears but the data appears as the legend but not as any lines on the chart. The column headings, which would normally appear as the legend, do not appear. The chart itself is blank. Does anyone have any ideas of a way to solve this?
View 10 Replies View RelatedRefer to the attached worksheet. On entering a value into cell C7, I'd like the value of the adjacent column D7 to be displayed in F6. Then when a value is entered in manually into C8, it will then update and put the value of D8 into F6. The idea is an individual will enter a value each week, updating that value. I intend to hide column D.
View 2 Replies View Related