I use hex2dec frequently and input with a hex 'E' such as 05e8 is misinterpreted as exponential notation. I can use =hex2dec("05e8") to get the correct value, but when the hex number is in another cell, I get the exponent assumption/ conversion (to 5 x 10e8), or a # NUM error if it is in quotes. This seems like a blatant problem but I've found no mention of it in searches or FAQs.
View 3 Replies
I need to be able to convert big hex numbers into decimal numbers. The problem that I have with this is that when you put a hex number that includes letters excel considers it text. And if the number is too big, you can't convert it to decimal format, and when you try to, it comes up with the #NUM! error.
Number: "78652385098375A879FF747C9847A00" without quotes
I have a problem that when I try to convert text to number and format the number without 2 decimal places as seen on the link I have given below, Instead of 1607.947, I get 1607947. I have Excel 2010 loaded. The details are in below picture.
[URL]
I need a formula to take the numbers listed in cells D4:D50
If below 1,000,000 than just keep that number value
EXAMPLE DATA
If the Ten Thousands place is 5 or below leave the same if it is higher round up. (use this concept for ALL PLACE VALUES
1,500,000 to 1.5 million (if the rest are zeros)
4,000,000 to 4 million
1,564,535 than to 1.57 million
1,545,535 than to 1.54 million
1,555,000 than to 1.55 million
Same concept for the rest as the Millions (move the rounded place up as needed)
So for Billions it would be 10 Millions place (to round form) I think lol
1,000,000,000 to 1 Billion
1,500,000,000 to 1.5 Billion
1,560,000,000 to 1.57 Billion
1,578,000,000 to 1.58 Billion
1,700,000,000 to 1.7 Billion
I would like this to continue all the way up to place value 999 QUADILLION! (if possible) if the value can go bigger that would be great!
i wanna convert the decimal number to a round number...like 2.0L to 2L.
View 6 Replies View RelatedI am trying to create a unique sample code by putting together the values of other cells that a user will input. It's all working well apart from the last part, where I am trying to include a decimal number. I want the decimal number to appear without the central "." and in a four digit format. e.g. 2.5 would appear as 0250, 14.25 would appear as 1425. This is the formlua I am using currently:
=IF(ISBLANK(B4),"",IF(LEFT(C4,1)="w",(B4&"-"&TEXT(F4,"YYMMDD")&C4&TEXT(G4,"HHMM")),(B4&"-"&TEXT(F4,"YYMMDD")&C4&LEFT(TEXT(H4,"00"),2)&RIGHT(TEXT(H4,"00"),2))))
However, where the value of H4 is 2.5, I am getting a result of 0303 (I've put this part in bold). I have attached a small spreadsheet to aid understanding.
I was wondering if anyone could tell me how to do away with the "Exponential" appearance of numbers (in Excel) when they are formatted as text. I am working with National Stock Numbers and there are no required computations based on them being formatted as a number ... AND ... one of my constraints is that they are required to be formatted as text when imported into an Access database ...
View 5 Replies View RelatedI need to separate a list of times from a telecommunications bill. I have 170,000 line of data.
The Times are represented as below.
eg
46 46 Sec
59 59 Sec
100 1 Min
159 1 min 59 sec
200 2 mins
502 5 mins 2 sec
1256 12 mins 56 sec
3456 34 min 56 sec.
How do I separate them to a decimalized per min value.
Workbook containing macros and formulas. The workbook will create worksheets automatically by macros and uses the same formulas in the worksheet. After creating the 10th worksheet these formulas stop displaying the result. They showed #N/A but in actual there supposed to have a values in each of the cells. By manually clicking the formula bar and pressing enter these values will appear.
View 9 Replies View RelatedI have a vba macro that takes data from one workbook and pastes it into another workbook. In doing this I have declared a few variables of type single (I only need two decimal precision). However, when I copy the values from the cells on the source workbook and paste them into the target workbook, the numbers end up having 12 decimal places. Ultimately, this extra precision causes my totals to be off by .01 or more after a while. I have tried rounding the number as I pull it off the source workbook into the variable, but that didn't matter. How do I solve this problem? Code for pulling data from source workbook:...
View 2 Replies View RelatedI entered a simple formula in a cell =B14*B16 but it won't calculate. The cell only displays the formula and not the result. tell me what I did wrong. I've attached a sample.
View 2 Replies View RelatedI need a formula to multiply only the decimal number in a cell and not the integer. For example: the number in the cell is 57.3615. I want to multiply .3615 only.
View 2 Replies View Relatedi try to convert several decimal values into Days Hours:Minutes:Seconds my problem is the following. If i user the format DD hh:mm:ss values over 32 will start counting the days from 0 (like a new month). and if i format it like M D h:m:s values < 32 days gets displayed with a 1 (for the month) before the days.
[Code] ......
is there a way to get only the count of days displayed without the summarization to months?
I'm trying to find out how many 40 hour shifts we had in a week by dividing the total seconds staffed (2989957) by total seconds in a week (144000) to get a 2 digit decimal result. I have a field formatted as [s] that I need to convert to decimal but when I do a calculation using that field it comes out as [s}.
Cell A1: 2989957 formatted as [s]
Cell B2: =A1/144000 formatted as number with 2 decimals
Result shows 0.00
If I use that calculation in a cell with a general format, I get 21 and it reverts to [s] format.
I need to convert the fraction at the beginning of a cells text into the decimal equivelent. for example 1/4-20 3A would give .2500. I have this formula so far that works perfect for fractions that only contain 1 number on each side of the division sign such as 1/2.
View 2 Replies View RelatedIs there a method to automatically convert a decimal to a percentage?
For example:
if given the value of 76.48, is it possible to automatically convert this to 76.48%? Formatting the cell as a percentage produces 7648%. I've tried everything I know and can't get the right result.
I am trying to convert time (formated as hh:mm) to a number with 2 decimal places.
Example
A1 7:51
B1 - want the number to show 7.85
Will then multiply this by an hourly wage to get total $ paid.
I was reading this Binary Conversion from Decimal on this site, however i am unable to reply to the thread. This code is exactly what i was looking for but have the need for it to be able to give the result as a number of bits eg. i would like the result to be dispalyed as 13 bits. I have tried modifying the code without any success and would like to be able to use it in this form. Public Function Dec2Base( Num As Long, base As Long, length as long) As String
View 3 Replies View RelatedHow to be able to convert decimal hours into time format.
Here are the examples:
12.2 = 12:02:00
98.41 = 98:41:00
300.42.1 = 300:42:10
and so on and so forth...
I got following Hex data in text format, I need change them to decimal,
0324 00BF 0000 0000 030C 00C6 0000 0000
0305 00C7 0000 0000 02FE 300F 040B 4753
4D4D 5352 4E4D 5343 4E31 0030 0F0A 0101
firstly I did txt to columns, then I found some data changed to scientific format which is not I wanted as I could not convert it using function HEX2DEC.
032400BF00000000030C00C600000000
030500C70000000002FE300F040B4753
4D4D53524E4D53434.00E+3100300F0A0101
if I set column data format to text when I doing Text to Columns operation then all data will be text, so I still can not convert them to decimal.
Is there a way to convert a value in a cell that is 2'-3 1/2" to adecimal such as 27.5"?
excel 2003 SP2
I have a formula that reads like this
=((11.4)-0.000000000946727*(11.4)*((5000)*5000))
The formula is used to calculate a comparative run time at an elevation of 5000 feet. The time the run was in is 11 minutes and 40 seconds. What I need to do is convert the 11.40 into total seconds which would be 700.
Now the actual 11.4 in the forumala is from a cell reference (say D14). It's whatever time the member plugs in (and so is the 5000, this represents the members altitude).
I need the time to stay in a decimal format because I have a huge database that I perform a lookup on to find the point value for it for another calculation seperate from this one. If I were to plug 700 in place of 11.4 my calculated result would be 683.43 which is exactly what I need.
How to I convert minutes into the equivalent fractional hours?
View 9 Replies View RelatedHave a large spreadsheet with time posted in minutes, but is formatted as "general" not time. (ie 8.15 is the entry in general format. Needs to be 8.25 to pay employee correctly). What formula can I use to convert that 8.15 to 8.25 easily?
View 3 Replies View RelatedI know that if I enter =3/4 in a cell it will give me .75 but is there is formula to convert fractions into decimals or is this the best way to do it? I was also wondering if there is some way to convert the decimal amount to a fraction
for measurement conversions I know that
=B3*25.4 will convert a decimal to mm and so will the formula =CONVERT(E4,"in","mm")
and to convert mm to a decimal a few formula that work are
=CONVERT(H3,"mm","in")
=MROUND(H4/25.4, 1/8)
=H5/25.4
=INT(H6/25.39999918*8)/8
But is there a way to convert a fraction to the decimal and is there a way to convert mm to a fraction instead of the decimal equivalent of the fraction?
or maybe a formula to convert mm to inches but instead of the result being in decimal format it would be in fraction format?
I am trying to convert 14 to 15 digits lengthy Binary value to number.
The formula =BIN2DEC(A2) is giving error #NUM
101111100001010
101111100001010
101111100001010
101111000011100
101111000011100
101111000011100
110001000001010
Is there a formula to convert a Decimal location into D/M/S form for Lat and Long
View 9 Replies View RelatedI'm trying to convert degree minutes and second latitude and longitude to decimal lat and long in excel (I have 100s of such conversion to undertake). When trying out dividing the minutes and second by 60 and checking my calculation on Google Maps lat/long finder or Latlong.net my calculations are not correct. However the equation to other way around - converting from decimal lat long to DMS (*60) works.
View 2 Replies View Relatedi have a combo boxes populated with fractions 1/16, 1/8, 3/16, 1/4 etc up to 15/16.
i just want to output the chosen fraction to a textbox as a decimal.
This is done in a userform, not in a cell.
formulae that converts % into time and visa-versa.
I.e 1.5 hrs = 1.30 hours ( i.e 90mins)
or the other way round
1.30 hours = 1.5 hrs..
