I'm trying to draw a diagram with many nodes connecting several line segments.
Each has a colour attribute which I'd like to show on the graph.
How can I plot it to-scale using VBA in excel?
TypeCoord1Coord2Colour
Node0 0 Yellow
Line0 1 Black
Node1 1 Red
Line1 3 Blue
Node3 3 Purple
Line3 9 Orange
How would i have VBA draw a line between a two ranges? say i have a named range of "start" and another name range "stop". i want to draw a red line between them. how can i do that with code. this is beggining my education for a much larger project I want to do later in the future.
View 9 Replies View RelatedI know you can draw a line on a userform by providing the start and end co-ordinate of where you want it, but is it possible to have a UserForm appear on call, with the 1st co-ordinate already set (by the programmer) and the user clicks on some point of the UserForm to indicate where they want the end co-ordinate to be, and that a line would then be drawn to that point ?
View 9 Replies View RelatedCan we draw tangent to a curve in excel graphs..? If yes if i could have some demo....** this.. I am working on finding rate ** change at an instantaneous point and average rate ** change ie: secant line
View 1 Replies View RelatedExcel 2007.I'm looking to extract parts of an address into different columns, I've already extract the Country, Post Code & Town. But what i'm having trouble doing is extract the street address and county, the reason I'm having trouble is because not every address has a county.
Below is what I have so far:
I need to extract Street (which is in red) into the Street Column
County (which is highthlighted in dark blue) into county
Excel 2010
A
B
C
D
E
F
[code].....
This is in Excel 2010
I have, what I believe a fairly complex request.
I have 3 fields that will be entered manually per row
Frequency in weeks = FQ Example FQ = 4 weeks
Duration in hours = DUR Example DUR = 3 hours
Start Date in Date Format = SD Example SD = 01/15/14
I have a series of columns starting at December 30, 2013. This represents the week of December 30th 2013.
It continues on until I hit the last week in December of 2015 which is 12/28/15
There are multiple rows with the 3 entries listed above (FQ, DUR & SD).
I need a function or macro that takes the Start Date (SD) for the specific row and finds it's location in the series of columns (for the example of 01/15/14, it would land on week 01/13/14). The program would enter the Duration (DUR) in that Column's Row (if that makes sense).
The program would then add the Frequency (FQ) to the Start Date (SD) and look for the next column (or Week) that it would fit in and once again enter the Duration (DUR) in that cell.
It would do this until it hits the 12/28/15 end date.
Any way to retrieve values from a combobox on a webpage (For my case there are two values in the combobox.) I know how to manipulate the webpage to choose the values in the combobox and so on but i want my user to be able to see the options they have from my userform.
View 8 Replies View RelatedI'm using Excel 2007 and I am taking the contents of various user entered cells and creating drawing textboxes to display this data using VBA. How would I get VBA to resize the width of the textbox so that the text is displayed correctly in the textbox i.e. there will be variable lengths of text in the cells so I currenly can read the full contents?
View 4 Replies View Relatedhow to change the default settings for shapes in Excel 2007? I select a line tool and it is a blue color and I would like to have its default as black
View 6 Replies View RelatedI have a spread sheet with product codes on and 5 different prices types but they have only pulled through 4 times so need to insert a 5th line for each product code
View 2 Replies View RelatedI have a percentage based input whose values can change, example:
Input matrix.png
I would then like this translated into a matrix that can adjust depending on the segment % input; like so:
Matrix.png
I am creating a graph for data that I collected. It was pretty easy to create. The problem is that I want to be able to have certain segments a red color. This is the data that I have
3380
0831
01374
01570
01928
02403
03003
03703
04128
04333
04777
05283
15732
16184
16822
06974
07310
07700
07995
08040
08402
08531
09208
39473
110006
010450
011072
111424
111691
112177
012925
I would like to create a line segment which is easy to do. But I need certain segments to be red. Such as this the line segment between 10006-10450 should be red. And the segment from 11424-11691 should be red too. I have attached my current chart that does not have the red.
Is there a way to take a column of numbers, say UPC numbers, and break out each number separately to paste into a browser window for a web search?
Would this require a macro?
I need to counting formula (I'm calculating weighted frequency of specific letters). My data is as follows:
A1 "lingual"
B2 "28"
The formula needs to look at the word in A1 and count the number of times a given letter (e.g., "l") appears in the cell (any position), and then multiply the result of the count by the value in B2. In the example above, the answer should be 56 (the letter "l" appears twice in "lingual", so it's 28X2).
I'm trying to analyse data and summarise it by date (greater than 60 days, and between 30 days and 60 days), by department using the first two digits of department codes, and where there are multi-line order numbers.
View 4 Replies View RelatedThis is my first post but I have been using Ozgrid for awhile now. I am farily good with excel formulas but have just started with macros so bear with me if i dont understand what you mean at first.
I am looking for a way to copy rows our of sheet2 in the attached sheet based on the value in the segments column in sheet 2. The rows need to be paste into sheet3 (already has heading set up). The segments value is the number of times i need each row copied into the next sheet. The purpose of this is to split random length samples into 10cm incriments for study. For example, a 1.5m sample is taken so there should be 15 segments of 10cm each copied into sheet3.
Also, if possible, it would be nice for it to display the actual length of the segment after copied into sheet3 for cases where the length was not evenly divisible by 10. I have found several examples of row copying macros, but none that will copy a conditional number of hte same row based on a cell value. In the original data there are close to 4000 rows, but the number of rows will vary depending on the data source.
Another thought I had was if the total number of available rows is going to be exceded would it be possible to have the rows pasted into different sheets based on the rock type listed in the column?
I made an Excel/VBA solution for a company in which userforms were created and manipulated programatically, including their code modules. They would then be deleted so next time they were created there wasn't naming errors.
They acted as data input forms which would have an input control for each column of data on the sheet.
There was one method which would create the form and then call another to add code to it's code module.
In one scenario, if the user would do data entry on one sheet and then immediately after do data entry on the same sheet using the data entry forms.
When this occurred something peculiar happened, after the method which added the code to the code module executed excel would crash. By putting a MsgBox to pop up just before the End Sub statement and having another in the calling function immediately after the procedure call. It became evident that the sub adding code to the module was not exiting correctly and causing the program to crash.
In essence the program was crashing when End Sub was executed
I've got an Excel file that uses 7-zip. It can execute a command line that will use 7-zip to go to a folder and zip each of the folder's files into its own zip file, placing the zips in a single, specified destination folder. I can specify whether to look in the source folder, or to also look in all of the source folder's subdirectories.
Question is, how do I tell 7-zip to just zip ONE file, and how do I tell 7-zip to zip a SPECIFIC LIST of files that I name (instead of looking through a whole folder)? how to use command line...
Code:
Sub a_zip_with_sub_directories()
Shell "cmd /c for /r ""C:Users aiDocumentsmonthly reportsFinal Copies of Monthly Reports"" %i in (*.*) do ""%ProgramFiles%7-Zip7za.exe"" a -tzip ""C:DATA aiipped\%~ni"" ""%i"""
End Sub
Sub a_zip_no_sub_directories()
Shell "cmd /c for %i in (""C:Users aiDocumentsmonthly reportsFinal Copies of Monthly Reports*.*"") do ""%ProgramFiles%7-Zip7za.exe"" a -tzip ""C:DATA aiipped\%~ni"" ""%i"""
End Sub
I've recently got a new computer and this problem is driving me nuts.
When I click view!toolbars!drawing, nothing happens. No drawing toolbar appears at the bottom of the screen where it used to be. There's a small "drawing toolbar" icon on the main toolbar, but whether this is depressed or not makes no difference either.
I understand this may be changed in the 2007 version, but I’m using Excel 2000
I want to have 2 cells where I can enter 2 numbers (length & height) so that a grid can be plotted. For example, a big sheet of paper size is length 30" x height 8", if first number is 10" (length) is entered, it will plot 3 lines across 30" (cos 30" divided by 10" equals to 3) and if I enter 2" (height) on 8", it will then cut it into 4". Attached a file for better understanding.
View 14 Replies View RelatedIn my attached sheet I've to find out final result in Column "F" (green shaded). My boss many times a year increases salary by certain percentage (say 30% or 40%) which is given in "E" column. After that I need to adjust it according to Pay Scale given in right side. For example one Executive's salary reaches 19880 after % increase. Now in pay scale we see in executive (row no. 13) it crosses 19800 so his final salary should be next upper value i.e 20600 (if it reached to 20700 after % increase, then his final salary could be 21400). That is final salary should be multiple of designation's increment plus minimum gross salary (Here 800X10=8000+11800=19800, since it exceed by 800, so salary should be 800X11=8800+11800=20600)
So we can either pull data from right side table or we can give formula in "F" column to get the required result.
salary adjustment.xlsx‎
I want to use VBA to update a drawing object's color, such as a circle.
For example, pretend I am counting sheep and I need to know when I have reached the maximum count by the visual aide of a stoplight. The script in my head reads: If the max. count of the sheep is less than 5, then the stoplight is green. If the max. count of the sheep is equal to 5, then the stoplight is yellow. If the max. count of the sheep is greater than 5, then the stoplight is red.
Is there a way to do such a thing on excel and with VBA?
My chart is coming in blank when I set up a line chart. This is my data that I selected and then pressed chart. 1997
63.9%
1998
63.2%
[Code].....
is there a code to draw a circle? by supplying the center position and the diameter? for example cell "A1" and " A2" are for the center of the circle position and "A3" for the diameter? and whats the code for drawing a rectangular by supplying the starting position and short length and the long length?
View 6 Replies View RelatedI want to draw circles from 3 points and other geometrical shapes. The points will be given from clicks on the background picture.
View 1 Replies View RelatedI am having trouble writing a macro that will draw a line relative to what cell is currently selected. I can only get the macro to draw a line in one specific spot.
View 9 Replies View RelatedI have a sheet with 30 textboxes made with the drawing toolbar. The user enters data, then clicks on a button which formats the page to adjust row size to match amount of info. I am having trouble finding the code to store the currently selected textbox in a variable so that I can place the focus back to the same textbox when the macro ends. Can anyone help me with the code to get the active textbox?
View 9 Replies View RelatedI want to draw a (time) line from the top left corner of a cell (say C3) to top left corner of a cell (say i10) in a Macro. Both start and end cells (column & rows) will vary depending on certain input values which I can convert into a cell reference. Line must overlap on both ends by two column widths.
View 9 Replies View RelatedI'm looking to write two small macros that will either hide or show all lines, freeform lines, and autoshapes on a page. In my extreme competence, I determined a for/next loop would be appropriate... but other than that, I can't figure out where to start.
View 4 Replies View RelatedI would like to plot the 1st dynamic line chart as shown in [URL] ..... but i never write any excel macro 2010 before, any sample of this?
View 4 Replies View Related