I need to counting formula (I'm calculating weighted frequency of specific letters). My data is as follows:
A1 "lingual"
B2 "28"
The formula needs to look at the word in A1 and count the number of times a given letter (e.g., "l") appears in the cell (any position), and then multiply the result of the count by the value in B2. In the example above, the answer should be 56 (the letter "l" appears twice in "lingual", so it's 28X2).
I would like to find the weighted average of the values in the "score" column. Additionally, I would like to only find the weighted average if the student is jack and jane. I have attached my workbook for review.
View 6 Replies View RelatedThis is my first post but I have been using Ozgrid for awhile now. I am farily good with excel formulas but have just started with macros so bear with me if i dont understand what you mean at first.
I am looking for a way to copy rows our of sheet2 in the attached sheet based on the value in the segments column in sheet 2. The rows need to be paste into sheet3 (already has heading set up). The segments value is the number of times i need each row copied into the next sheet. The purpose of this is to split random length samples into 10cm incriments for study. For example, a 1.5m sample is taken so there should be 15 segments of 10cm each copied into sheet3.
Also, if possible, it would be nice for it to display the actual length of the segment after copied into sheet3 for cases where the length was not evenly divisible by 10. I have found several examples of row copying macros, but none that will copy a conditional number of hte same row based on a cell value. In the original data there are close to 4000 rows, but the number of rows will vary depending on the data source.
Another thought I had was if the total number of available rows is going to be exceded would it be possible to have the rows pasted into different sheets based on the rock type listed in the column?
I have a row of cells that contain a single letter: W,C,O.
I need to provide a count of the number of occurancies of each letter. So I have a cell that shows me the total W's, a cell showing me total C's and another showing total O's.
Whats easiest way to do this?
I know its not ideal, but on this occassion ive no desire to add and hide another column.
I have a spreadsheet which has a column that contains route numbers (for collection of goods). Some addresses have 2 or 3 route numbers within the same cell i.e.
3
3 20
3 20 15
I would like to know the formula for counting the number of cells that contain each route number i.e. from above 3 = 3, 20 = 2, 15 = 1
I want to count the number of rows in a specific column up to an empty cell and assign this value to a cell. I don't want to count the total number of rows but instead I want the number of the first group of rows.
For example, column A may have cells ranging from row 2 to 10 and then from row 12 to 20, so I only want to count the first group.
The below code counts the total which is not what i need.
Code:
Sub test()
Dim Mycount As Single
Mycount = Application.Count(Range("A:A"))
Cells(1, 4) = Mycount
End Sub
excel.jpg
how to make my network days stop counting when I insert a value in the completed column (in this case H3). I have a Date Received column (A3), a due day column (G3) and the last column with the date (N3). My remaining days column keeps counting after I filled the completed cell (H3) and won't stop counting after. I need a formula to stop after the completed cell is fill up.
I've got the following sumproduct formula (which seems to work):
=SUMPRODUCT(--(ISNUMBER(SEARCH($B17,Product_Keywords))),--(YEAR(Invoice_Date)=H$3),--(ROUNDUP(MONTH(Invoice_Date)/3,0)=H$4),--(Invoiced_Amount))
B17 is a keyword to be found in the Product_Keywords range
I'd like to modify it so that:
ifthe cell in the range Product_Keywords also includes "," thendivide the sumproduct by the number of commas+1
Presumably I could add --(ISNUMBER(SEARCH(",",Product_Keywords) as one of the conditions,
but how would I keep track of the number of commas in the cell?
One has numbers the other has "YES" or is blank. I want a formula to look at the second column and where there is a "Yes" then count the number in the same row in the first column.
View 4 Replies View RelatedI have a percentage based input whose values can change, example:
Input matrix.png
I would then like this translated into a matrix that can adjust depending on the segment % input; like so:
Matrix.png
I am creating a graph for data that I collected. It was pretty easy to create. The problem is that I want to be able to have certain segments a red color. This is the data that I have
3380
0831
01374
01570
01928
02403
03003
03703
04128
04333
04777
05283
15732
16184
16822
06974
07310
07700
07995
08040
08402
08531
09208
39473
110006
010450
011072
111424
111691
112177
012925
I would like to create a line segment which is easy to do. But I need certain segments to be red. Such as this the line segment between 10006-10450 should be red. And the segment from 11424-11691 should be red too. I have attached my current chart that does not have the red.
Is there a way to take a column of numbers, say UPC numbers, and break out each number separately to paste into a browser window for a web search?
Would this require a macro?
I'm trying to draw a diagram with many nodes connecting several line segments.
Each has a colour attribute which I'd like to show on the graph.
How can I plot it to-scale using VBA in excel?
TypeCoord1Coord2Colour
Node0 0 Yellow
Line0 1 Black
Node1 1 Red
Line1 3 Blue
Node3 3 Purple
Line3 9 Orange
Excel 2007.I'm looking to extract parts of an address into different columns, I've already extract the Country, Post Code & Town. But what i'm having trouble doing is extract the street address and county, the reason I'm having trouble is because not every address has a county.
Below is what I have so far:
I need to extract Street (which is in red) into the Street Column
County (which is highthlighted in dark blue) into county
Excel 2010
A
B
C
D
E
F
[code].....
I'm trying to analyse data and summarise it by date (greater than 60 days, and between 30 days and 60 days), by department using the first two digits of department codes, and where there are multi-line order numbers.
View 4 Replies View RelatedThis is in Excel 2010
I have, what I believe a fairly complex request.
I have 3 fields that will be entered manually per row
Frequency in weeks = FQ Example FQ = 4 weeks
Duration in hours = DUR Example DUR = 3 hours
Start Date in Date Format = SD Example SD = 01/15/14
I have a series of columns starting at December 30, 2013. This represents the week of December 30th 2013.
It continues on until I hit the last week in December of 2015 which is 12/28/15
There are multiple rows with the 3 entries listed above (FQ, DUR & SD).
I need a function or macro that takes the Start Date (SD) for the specific row and finds it's location in the series of columns (for the example of 01/15/14, it would land on week 01/13/14). The program would enter the Duration (DUR) in that Column's Row (if that makes sense).
The program would then add the Frequency (FQ) to the Start Date (SD) and look for the next column (or Week) that it would fit in and once again enter the Duration (DUR) in that cell.
It would do this until it hits the 12/28/15 end date.
I have number in cell (A1) = 100. when I enter number in any cell of column(B) for example (B1)=10. then in cell (C1) the result of (A1) - (B1) = (90) and if I add in cell (B2)=10 then in cell (C1) the result of (A1) - (B1+B2) = 80 .accumulatively in cell (C1). and any number in column (B), the result will be (A1) minus any number in column(B) accumulated in (C1)
second question
I have number in cell (A1) = 100. when I enter number at cell (B1) = 10 then the result would be in the adjacent cell (C1) = (A1) - ( B1) = 90 and If I enter a new number in cell (B2) = 10 then the result would be in the adjacent cell (C2) = (A1) - (B1+B2) = 80 and If I enter a new number in cell (B3) = 10 then the result would be in the adjacent cell (C3) = (A1) - (B1+B2+B3) = 70 and so on. I want the result to be add automatically to adjacent cell in column (C)
I found these 2 examples online on how to count Mondays between 2 dates but neither seems to work on Excel 2003, which I am using. Can anyone help me please?
Number Of Mondays In Period
If you need to return the number of Mondays (or any other day) that occur within an interval between two dates, use the following Array Formula:
=SUM(IF(WEEKDAY(A2-1+ROW(INDIRECT("1:"&TRUNC(B2-A2)+1)))=C2,1,0))
This formula assumes the following:
A2 contains the beginning date of the interval
B2 contains the ending date of the interval
C2 contains the day-of-week number (1=Sunday, 2=Monday,...,7=Saturday) ....
How to be able to count cells with a specific color (green) and a specific value (8210) for example the sum of the info I am needing below should be 2 even though there are technically 3 - 8210 cells.
8260
8210
8210
8220
8220
8250
8240
8260
8250
8210
8280
I am trying to find a formula that will give me a word count in specific cells.
View 14 Replies View RelatedCELLS AA5:AA64 will have either EF, CS, SBS and/or, RP. Cell AA16 could be "EF / CS / SBS" and AA20 could be CS. I want Cell AA65 to count show how many CS's have been entered in that range. How would I do this.
View 3 Replies View RelatedI am trying to use a count if function for a specific word and a time range or number. so On Sheet 1 (called Raw Data) I want to check for the word annuity in Column H -
If it is present I want the formula to then check if the corresponding time in column C is within a specific hour.
HTML Code:
=COUNTIFS('Raw Data'!H:H,"Annuity",'Raw Data'!C:C, rng,">=19.00",'Raw Data'!C:C rng,"<20.00")
This is what I have so far.
How can I count the number of used columns in a specific row? The below code doesn't work.
View 14 Replies View RelatedHow would you be able to count all the used cells in a specific column?
I know the following would count all used cells in a worksheet but what about a specific column?
how can I sum up all the "Type of Defect"[CR, LOF, DR] for a specific Welder. They were tag as Welder 1-7. In the attached example (Sheet1- Data), Welder 1 has 2 "CR" and 1 "LOF", this figures to be reflected in Sheet 2 (TOD).
View 2 Replies View RelatedHaving a large spreadsheet with Columns A to F filled with data.
I'm trying to create a formula that's count the unique value "Order no." (Coloumn F) but only the ones between certain Departments Column(H) a certain "Error type" in Column(J).
Here is the formula I am currently using:
=SUMPRODUCT((Sheet1!B19:E15235="Contact Sheet Available/Disc Sent")*(MONTH(Sheet1!H19:H15235)=MONTH(TODAY())))
This counts all entries with the status "Contact Sheet Available/Disc Sent" and that have a timestamp within the current month.
I need to alter this to count the last week in September and the first 3 weeks in october (using this month as an example and will have to have to be able to run without changing dates next month).
If i want to remove the row that has value lower than 2 in a particular column (in this pic it's column L).
this column come from a =counta formula to count how many 'x' on each row.
[URL]
i paste few rows below. the column i am talking about is highlighted as 'count' My data goes really long below, thus it's not effective to use filter option.
1
1
2
2
3
3
4
4
[code].....
I have a worksheet with the following structure:
Column 1: Date (from 11/10/1996 - 31/12/2000)
Column 2 and onwards: Price (in numeric form, in which there are N/A records entered as text)
What I want to do is using VBA codes to find out how many "N/A" records appear in each month, and if there is more than 10 "N/A" records in a month, I would discard the months' record (set the records be -99).
I want code to count cells that contains only specific word like ( do)
View 4 Replies View Related