I know you can draw a line on a userform by providing the start and end co-ordinate of where you want it, but is it possible to have a UserForm appear on call, with the 1st co-ordinate already set (by the programmer) and the user clicks on some point of the UserForm to indicate where they want the end co-ordinate to be, and that a line would then be drawn to that point ?
View 9 RepliesHow would i have VBA draw a line between a two ranges? say i have a named range of "start" and another name range "stop". i want to draw a red line between them. how can i do that with code. this is beggining my education for a much larger project I want to do later in the future.
View 9 Replies View RelatedCan we draw tangent to a curve in excel graphs..? If yes if i could have some demo....** this.. I am working on finding rate ** change at an instantaneous point and average rate ** change ie: secant line
View 1 Replies View RelatedI'm trying to draw a diagram with many nodes connecting several line segments.
Each has a colour attribute which I'd like to show on the graph.
How can I plot it to-scale using VBA in excel?
TypeCoord1Coord2Colour
Node0 0 Yellow
Line0 1 Black
Node1 1 Red
Line1 3 Blue
Node3 3 Purple
Line3 9 Orange
Is it possible to add horizontal lines to a user form, like as shown in the attached image. I know about frames, but unsure how to get just one horizontal line.
View 3 Replies View RelatedI have a 5-column listbox in a userform. I do not know how to make the column borders visible. If somebody can tell me, that would be great.
If not, then the next alternative would be to manually draw a line. I tried to so one, by creating a Label with a width of 1, and backcolor ot black. This works but not in front of a list box. For some reasons it cannot be brought to front/forward (order) of a listbox, I already right-clicked several times and sent tthe order to front.
Is it possible to bring it in front of a listbox?
On my userform, when a command button is clicked, then a textbox gets filled in the the answer. How do I insert line breaks in the answer? For instance:
AnswerPart1
AnswerPart2
Instead of: AnswerPart1AnswerPart2
I tried .value="AnswerPart1" & Chr(10) & "AnswerPart2" but then all the text box displays is AnswerPart1 (the symbol for paragraph) AnswerPart2. It doesn't actually break the line.
I have built a small userform with 3 fields. The macro ran OK first few times. Now, when user enters data in the form and clicks OK nothing happens. I found that repeated clicking on OK or Cancel button on form had no effect. I then observed that VBA editor was open and the yellow cursor was displayed on the first code line under cmdOK_click procedure. The code line was also highlighted in yellow. There are no errors to debug and no break points etc. When I clicked the Run (or Continue) icon from the VBA toolbar, the macro completed OK. Question: Why is the macro pausing on the first line and how can I make it run without pausing for no apparent reason.
View 4 Replies View RelatedI have a worksheet in whichs Column A Cells , there is corresponding string content in Col. Z. Some cells of column Z contain of many lines (up to 100 line) which i want to reduce to one. I want to select one line through double clicking in the listbox of the userform and all other lines should be deleted and only the clicked one should remain. Code should then jump to the next non empty Z cell.
Columns B, C, D, E, F, G and H should also be shown in the userform and they should be live editable. I have attached and example file with userform and example data.
I want to add a user-form on a chart, which will have check-boxes that will allow me to select series(lines) that I want see and compare in a chart. Currently my line chart has 24 series (Lines) which makes the chart very difficult to view and looks very busy. How do I add list of check-boxes that will allow me to select one or multiple lines that I want to see at a time?
View 2 Replies View RelatedI've recently got a new computer and this problem is driving me nuts.
When I click view!toolbars!drawing, nothing happens. No drawing toolbar appears at the bottom of the screen where it used to be. There's a small "drawing toolbar" icon on the main toolbar, but whether this is depressed or not makes no difference either.
I understand this may be changed in the 2007 version, but I’m using Excel 2000
I want to have 2 cells where I can enter 2 numbers (length & height) so that a grid can be plotted. For example, a big sheet of paper size is length 30" x height 8", if first number is 10" (length) is entered, it will plot 3 lines across 30" (cos 30" divided by 10" equals to 3) and if I enter 2" (height) on 8", it will then cut it into 4". Attached a file for better understanding.
View 14 Replies View RelatedIn my attached sheet I've to find out final result in Column "F" (green shaded). My boss many times a year increases salary by certain percentage (say 30% or 40%) which is given in "E" column. After that I need to adjust it according to Pay Scale given in right side. For example one Executive's salary reaches 19880 after % increase. Now in pay scale we see in executive (row no. 13) it crosses 19800 so his final salary should be next upper value i.e 20600 (if it reached to 20700 after % increase, then his final salary could be 21400). That is final salary should be multiple of designation's increment plus minimum gross salary (Here 800X10=8000+11800=19800, since it exceed by 800, so salary should be 800X11=8800+11800=20600)
So we can either pull data from right side table or we can give formula in "F" column to get the required result.
salary adjustment.xlsx‎
I want to use VBA to update a drawing object's color, such as a circle.
For example, pretend I am counting sheep and I need to know when I have reached the maximum count by the visual aide of a stoplight. The script in my head reads: If the max. count of the sheep is less than 5, then the stoplight is green. If the max. count of the sheep is equal to 5, then the stoplight is yellow. If the max. count of the sheep is greater than 5, then the stoplight is red.
Is there a way to do such a thing on excel and with VBA?
is there a code to draw a circle? by supplying the center position and the diameter? for example cell "A1" and " A2" are for the center of the circle position and "A3" for the diameter? and whats the code for drawing a rectangular by supplying the starting position and short length and the long length?
View 6 Replies View RelatedI want to draw circles from 3 points and other geometrical shapes. The points will be given from clicks on the background picture.
View 1 Replies View RelatedAny way to retrieve values from a combobox on a webpage (For my case there are two values in the combobox.) I know how to manipulate the webpage to choose the values in the combobox and so on but i want my user to be able to see the options they have from my userform.
View 8 Replies View RelatedI am having trouble writing a macro that will draw a line relative to what cell is currently selected. I can only get the macro to draw a line in one specific spot.
View 9 Replies View RelatedI have a sheet with 30 textboxes made with the drawing toolbar. The user enters data, then clicks on a button which formats the page to adjust row size to match amount of info. I am having trouble finding the code to store the currently selected textbox in a variable so that I can place the focus back to the same textbox when the macro ends. Can anyone help me with the code to get the active textbox?
View 9 Replies View RelatedI want to draw a (time) line from the top left corner of a cell (say C3) to top left corner of a cell (say i10) in a Macro. Both start and end cells (column & rows) will vary depending on certain input values which I can convert into a cell reference. Line must overlap on both ends by two column widths.
View 9 Replies View RelatedI'm looking to write two small macros that will either hide or show all lines, freeform lines, and autoshapes on a page. In my extreme competence, I determined a for/next loop would be appropriate... but other than that, I can't figure out where to start.
View 4 Replies View RelatedI have a worksheet with 27,000+ rows. Item numbers are listed in column J and quantities in column E. The rest of the data on the sheet is not needed. An item number may be listed multiple times. I'm trying to create a new sheet that lists each item number once with the sum of all the quantities associated with that number. The data is sorted so all "like" item numbers are listed in consecutive rows.
View 5 Replies View RelatedI am working on a huge amount of data and want to analyse that data through charts because charts are quick representation of the data and save a lot of time. I got some code from my friend, to read each row in a worksheet and plotted the corresponding chart on the new worksheet each time i.e., each row has one chart which is plotted on new worksheet each time.
But I don't want it to plot the chart on the new worksheet. I want it to plot the chart on the same worksheet. In my case there are always more than 30 rows, so it should draw 30 charts on the same worksheet in which 30 rows are written.
Here is the code which plots charts on the multiple sheets
Code:
Sub LineCharts()
Dim Ws As Worksheet
Dim NewWs As Worksheet
Dim cht As Chart
Dim LastRow As Long
Dim CurrRow As Long
Set Ws = ThisWorkbook.Worksheets("Sheet3")
LastRow = Ws.Range("A65536").End(xlUp).Row
[Code] ....
Is there any method in excel that can pay the way for drawing figures according to data feeded.
for Ex.
Say
Radius of circle=x
Now this x can be used for drawing the circle and the radius can be entered by user.
I'm currently drawing rectangle shapes with transparency on top of a graph to highlight certain depth ranges in vba. Rectangles span entire graph width. Is it at all possible to draw the shapes behind the series plots?
View 7 Replies View RelatedI have a macro that runs when a text box is clicked and searches in another excel sheet for a cell with a specified value. My problem is that I specify the string to search for in the code and I would like it to search for the string in the text box that gets clicked.
Here is what I have right now: ...
How do i preventing drawing objects from being modified/ deleted/added on an excel worksheet? edit: but i want people to be able to interact with them i.e. people shud be able to enter text into textboxes.
View 4 Replies View RelatedI want to draw an object and then change the object shape by making subsequent changes in the cell.I don't know how to do the same.
View 4 Replies View RelatedI am creating a "board game" type game in excel and one of the functions will be landing on a cell. When you are on this cell you click the checkbox to the left of it which then flips the value to true. I then have another formula generating a random number between 1 and 100 if the value is true. I would like to make cards in a separate sheet out of single cells but make about 40-50 of them maybe less. I want it to be able to pull a card(cell's) contents into another cell on another sheet. But I want it to be a random card associated with the random number generator. I can definitely make changes if this isn't possible but the point of it is to show the contents of one of the random cards.
View 2 Replies View RelatedI have a list of part numbers and a new drawing number and old drawing number. I'm am trying to put this list on the second page of a workbook and write a code on thie first page that allows a person to enter the part number and the old and new drawing numbers will be displayed.
View 3 Replies View Related