Cell C3 is validated to show a list of the worksheets in my workbook.
Is it possible to set up a hyperlink in cell B2 with the text 'Go To' which will pick up the selected sheet name from C3 to enable the user to go directly to that sheet?
I have a word 2010 file with some hyperlinks to some Excel files and Excel cells. All these files are within a a single folder that I shall send to another pc. I don't know how to make the hyperlink directory path the same as the word file except for the file name.
View 1 Replies View RelatedI am trying to activate a Dynamic Hyperlink in IE. Each time a user starts a new session, a single parameter in the URL changes. Is there a way to search the page, identify the preferred link, and activate it without knowing the full hyperlink address?
The hyperlink is as follows: [url]
The parameter after "unitchange" is what changes from session to session.
I took a look around and noticed I can use the HYPERLINK command to link to a URL plus the contents of a different cell, such as something like =HYPERLINK(URL).
My question is, can I do a dynamic hyperlink that is smart enough to append whatever data is in the same cell to be the final part of the URL? Or do I HAVE to have another column where the hyperlink command is pointing to the first column as the variable?
For example I have a single column with either nothing in it or a 4 digit number. The 4 digit number is also the end of the URL I want it to link to. For example if the column says 1234, I would want it to go to [URL] .........
Im creating a template for a number of sheets and I want the hyperlink for my previous/next buttons (to move forward and back through sheets) to change based on cell values.
All my sheets are named as numbers ie '1','2','3' and so on
The name (and therefore number) of the sheet is held in cell E22 on each sheet.
The 'previous' button needs to therefore hyperlink to cell A1 on sheet (E22-1) and the 'Next' button to cell A1 on sheet (E22+1)
The 'buttons' I have though are arrows from Excels shapes and I dont know how to add code to them though to start the hyperlink.
Also if i wanted to reference sheet E22-1 etc in a HYPERLINK() function what is the syntax?
I am building a dashboard and would like to be able to have shapes I have created be clickable with a dynamic link to a document on our network. Something along the hyperlink() function.
In a cell, the function looks like this: =HYPERLINK(Worksheet!I34,Worksheet!F34).
The data in I34 changes, depending on the input from a drop down using a vlookup command. Is it possible to create a macro and assign it to a shape to make the shape a clickable link?
I am hitting a brick wall on this one. I am trying to assign hyperlinks to objects based on the cell value. Here is my code that colors the objects that have the same names as in Column AO. I am trying to also add a hyperlink to those same objects with the cell value in the list. The problem is while a hyperlink is added, I can not get the value of the cell to show up in the hyperlink address.
Sub TurnColOn()
Dim i As Integer
On Error Resume Next
LastRowa = Range("AO65536").End(xlUp).Row
For i = 2 To LastRowa
Labl1 = Range("AO" & i).Value
ActiveSheet.Shapes(Labl1).Select
ActiveSheet.Hyperlinks.Add Anchor:=Selection.ShapeRange.Item(1), Address:=Labl1
Selection.ShapeRange.Fill.ForeColor.SchemeColor = 10
Selection.ShapeRange.Fill.Visible = msoTrue
Selection.ShapeRange.Fill.Solid
Next i
End Sub
I have read a number of posts and other sites and can create the hyperlink in the desired cell but get an error message to the effect, "Cannot open the workbook."
The current macro follows. I believe its description is made in the comment statements below the date-author comment.
Sub DecomposeCTQ()
'Decompose CTQ Macro
'14Oct13 Charles T. Carroll'
'This macro copies the template to a new worksheet and takes data from the'
' active cell CTQ and makes it the parent CTQ on the new worksheet. Then'
' it renames the new worksheet with the active cell CTQ ID.'
If ActiveCell.Column 2 Then
MsgBox "You must be in the CTQ ID Column to run this program"
GoTo Leave
[code]......
I have created an employee schedule with 26 pay periods. Each pay period has its' own worksheet for scheduling employees.
To navigate to the worksheets I created a home page on one of the worksheets and would like to create an AutoShape for navigating with a hyperlink based on the pay period which is selected in cell B3. When the autoshape is clicked the user would go to the correct pay period worksheet.
For example Home Page:
Cell B3 contains drop down list of the 26 pay periods which the user selects the proper pay period (ie. 8Jun14-21Jun14)
Cell E3 is a cell reference on the sheet A1
Cell B6 contains hyperlink formula =HYPERLINK("#"&"'" & B3 & "'!" & E3)
Autoshape has formula =B6
When I click on the autoshape the hyperlink does not work.
I want to list file names from a directory and sub directories and hyperlink them. I have been able to list the file names onto an excel sheet, but I cannot get it to hyperlink to the file.
'Force the explicit delcaration of variables
Option Explicit
Sub ListFiles()
[Code]....
I have this code that looks through my worksheet once the conditions are met it will email, and in column "M" I put a hyperlink to where the document is stored. All works as far as the email format, even grabs the hyperlink but it’s not clickable in the email.
Here is the code.
I am outlook 07 and vista 07.
Option Explicit
Const Startingrow = 11 'Data starts on row ##
Const AlarmDelay = 183 'send warning
Sub CheckTimeLeftFac()
'References needed :
'Microsoft Outlook Object Library
Dim i As Long
Dim j As Long
Dim msg As Long
Dim Lastrow As Long
Dim WhoTo As String
Dim SubjectLine As String
Dim MessageBody As String
Dim olMail As Outlook.MailItem
Dim olApp As Outlook.Application
Dim strLink As String
I have hyperlinks betwene one worksheet to another - they only only hyperlinked thourh column & rows (eg: A100) etc. How can I lock these hyperlinks but still allow users to insert new rows without losing their place?
View 2 Replies View RelatedI am having a slight problem copying hyperlinks. I have written some code that sorts data by date and then creates a simple diary. It originally placed the name of the event in the new diary sheet. What I would like to do is instead of copying the name into this new sheet copy a hyperlink that I have created to the company's website for that event.
I can create the hyperlink using hyperlink(B1,A1) where A1 is the company name and B1 is the web address but since the new sheet will not have the underlying data I need to actually copy the values and format of the hyperlink rather than the formula.
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
I would like to replace the blue bit of this Dynamic Named Range (DNR) with an INDIRECT formula in order to modify the starting point for the DNR: =OFFSET(DATA!$C$60,0,0,20,1). Unfortunately, I can’t seem to get my INDIRECT formula to work in order to use it to replace the blue bit above: INDIRECT("'"DATA"'!&ADDRESS(MATCH('SHEET1'!AC8,DATA_Date,0)+22,3)"). The orange bit of the formula above returns a value of 60, therefore the ADDRESS formula should return $C$60, that can then feed into the INDIRECT and act as the equivalent of DATA!$C$60. But it doesn’t.
View 2 Replies View RelatedI have a question on the above but can't seem to find a solution. There are two ways that I can find for dealing with dynamic lists via data validation:-
1) Offset and match, cavet being the data must be sorted a-z
2) Have lists for each potential selection
Is there any way to get around 1 without having to do 2? E.g. Got two columns of data, unsorted, and a list from which the user can choose from. The user chooses from the list in first cell, in the second cell require the dynamic list to return all the values accordingly?
I have a dynamic table which is linked to a couple of charts. The table must remain dynamic.
I needed to add two new columns to the table, "Focus Area" and "Category". I need a drop down list in the "Category" column to be dependent on the item selected from a drop down menu in "Focus Area".
I can get the first row of the dynamic table to do this.... however; subsequent rows all lock the drop down list in the "Category" column to the same choices regardless of what is chosen in the "Focus Area" list.
Is there a way to make dynamic drop downs within a dynamic table?
I am trying to do is have a hyperlink go to another sheet after searching the second sheet for the same value. I have a sheet labeled "IQI" which has the total number of cases for a certain condition. I have another sheet labeled "IQI Cases" which lists out each case individually.
I want to be able to click on the Condidion in the IQI sheet and have that take me to that specific spot in the IQI Cases sheet where the cases for that condition begin.
Right now I just have a simple hyperlink to a range of cells. But each month a report is generated and the range will be different and I have to go and change the range each time. So I guess I want a hyperlink and a lookup function combination.
I dont know if this would be a Macro or a formula.
I am trying to use hyperlinks to navigate documents. I created a html document with excel and used hyperlinks to PDF documents.
At first the hyperlinks worked fine, opening the PDF software and in turn the PDF document.
Now when i click the hyperlink in Internet Explorer for the PDF document to open, it brings me to a blank HTML document.
In other words, the hyperlinks to the PDF's no longer open the PDF software and document.
Imagine if the word below was a hyperlink to a webpage somewhere;
House
I would like to know how to get excel to look at this paticular page and return that one word to a cell, so in this example, I would like cell A1 to to contain the word house.
I do not need any information about where the link is referring to, I already have this information.
All I need is for excel to look at this link and tell me what it is called.
I'm having a problem getting a hyperlink to work when adding it to a vlookup. The vlookup is looking at a page number and returning the named drawing from an Auto Desk Inventor File. I'm trying to get the returned drawing name to become a hyperlink to open the drawing. I would rather have this added to the formula so if a page number ever changes the hyperlink will change to the correct drawing also. Here is what I have so far but it is just returning an error of " cannot open the specified file". =HYPERLINK(IF(E5="","",(VLOOKUP(E5,'Inventor Import'!$A$2:$E$200,5,FALSE))))
View 4 Replies View Related"A12" says "Click for new line". I want that to be a hyperlink so if someone clicks it, it will automatically take you to a fresh new line to input there information.
Row 14 and above is a frozen pane.
Anything from row 15 below will contain data.
I could have 1,232 rows and the users who are using this spreadsheet probably won't fancy scrolling down for ages to find a new row to enter the information...
I have tried searching the forums and google but most of them explain how to use hyperlink with regards to different cells or worksheet or dedicated internet links.
i have a little twist to that and am unable to figure out exactly how to make that happen?
My requirements:
cell a3 has value 321011
now this needs to be hyperlinked iteself meaning
cell A3 will display the same value 321011 but should be hyperlinked to
http://support.microsoft.com/kb/321011
I have just been told that one of our servers is being replaced this weekend. I have thousands of hyperlinks in excel docs that reference this server. Other than manually reestablishing the links one by one to the new server, is there a way to do some kind of global change to replace the old server name with the new server name?
These are not hyperlink formulas, but rather Insert>>Hyperlink.
Or, is there a way to convert these hyperlinks to hyperlink formulas that would omit reference to the server and thus not be broken during the conversion?
Grasping at straws because I cannot envision having to relink these one by one.
how to create a Hyperlink to a specific worksheet in a workbook instead of just the workbook?
View 2 Replies View RelatedSuppose I have and excel workbook with 100 sheets and I want to click from one sheet to another. I created a table of all the sheets and hyperlinked the sheets then copy/pasted the table into each worksheet but that seems primitive. What if I have to revise the table? I will have to do it hundred times !
Is there a smart way to accomplish this using one smart master table that I can copy and paste into each sheet or somehting similar?
The idea
[Code] .....
Dropdown list
-------------
O11 = "Land" , "Sea"
P11 = "A - H" , "I - O" , P - Z"
Directory = C:MammalsLandA - HDate_120313 - Carnivore - Code_A3622
The list of filenames in the "A-H" folder has different dates and codes, how do I go about fixing wildcard *Carnivore* so that regardless of the date and code, there will be a match.
list of files in A-H folder
------------------------
Date_120313 - Carnivore - Code_A3622
Date_030213 - Herbivore - Code_A2231
Date_051212 - Hybrid - Code_A4431
I have a list of values in excel that represent image numbers (IMG_0001 etc...) in column A (A1:A703); hence representing my 702 images. I am trying to hyperlink each single image to its respective image which is located on my usb key all in one go (I don't want to hyperlink one at a time as it would take me for ages). Is there an easy way to do that?
View 1 Replies View RelatedI have a number of sheets with a "target" cell in specified rows that contains text and a hyperlink to a file (JPG or GIF). I need to modify the filename and pathname according to other values in other cells, then update the target cell text and hyperlink.
So far i have the old filename, path and hyperlink A also have the new filename, path and hyperlink And, i can set the target cell new text.
But how do I set the new hyperlink? I've tried variations on the theme of Range.Hyperlinks(1).Add Address = newHL but nothing seems to work - run time error 438.
How I set the new hyperlink?
My original intent was to have a drop down menu that contained hyperlinked options, but I was told that this required programming code, which I am not capable of doing. Is it possible to create a hyperlink that is based on an IF statement. For example, I could make my selection out of the drop down menu and then click on another cell that would hyperlink to a sheet based on what was selected from the drop down menu.
View 14 Replies View Related