My original intent was to have a drop down menu that contained hyperlinked options, but I was told that this required programming code, which I am not capable of doing. Is it possible to create a hyperlink that is based on an IF statement. For example, I could make my selection out of the drop down menu and then click on another cell that would hyperlink to a sheet based on what was selected from the drop down menu.
View 14 RepliesI Have a CheckBox Thats Linked with CA22
In Cell CB22 I have the Following Formula:
=IF(CA22=TRUE,"1","")
In Cell CC22 I Have...
=IF(CB22="1","RM-4E ADD1",HYPERLINK('RM-4E (Add - 1) (2)'!A1,"RM-4E ADD1"))
The Sheet namne its supposed to Hyperlink to is called
RM-4E (Add - 1) (2)
When the Check Box is Unchecked it Changes CA22 to False and Puts in CC22 Text: RM-4E ADD1
When the Check Box is Checked it CHanges CA22 to TRUE and is supposed to create a Hyperlink to that sheet...Only when i click it it comes back with
'Cannot open the specified file."
I even went as far as typing out the Word Hyperlink( clicked the sheet and selected Cell A1 on that sheet but it still comes back with the error!
Excel 2010
I have this code that looks through my worksheet once the conditions are met it will email, and in column "M" I put a hyperlink to where the document is stored. All works as far as the email format, even grabs the hyperlink but it’s not clickable in the email.
Here is the code.
I am outlook 07 and vista 07.
Option Explicit
Const Startingrow = 11 'Data starts on row ##
Const AlarmDelay = 183 'send warning
Sub CheckTimeLeftFac()
'References needed :
'Microsoft Outlook Object Library
Dim i As Long
Dim j As Long
Dim msg As Long
Dim Lastrow As Long
Dim WhoTo As String
Dim SubjectLine As String
Dim MessageBody As String
Dim olMail As Outlook.MailItem
Dim olApp As Outlook.Application
Dim strLink As String
I have hyperlinks betwene one worksheet to another - they only only hyperlinked thourh column & rows (eg: A100) etc. How can I lock these hyperlinks but still allow users to insert new rows without losing their place?
View 2 Replies View RelatedI am having a slight problem copying hyperlinks. I have written some code that sorts data by date and then creates a simple diary. It originally placed the name of the event in the new diary sheet. What I would like to do is instead of copying the name into this new sheet copy a hyperlink that I have created to the company's website for that event.
I can create the hyperlink using hyperlink(B1,A1) where A1 is the company name and B1 is the web address but since the new sheet will not have the underlying data I need to actually copy the values and format of the hyperlink rather than the formula.
I am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies View RelatedI am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code:
tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code:
TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click()
Dim Row As Range
Dim FinalRow As Long
Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range
Application.ScreenUpdating = False
[code]....
Windows 7 with Excel 2010
I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:
Code:
Sub testInsert()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim i As Integer
Dim strTest As String
strTest = "test"
[Code] .......
Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:
Code:
Sub testSelect()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim mrs As New ADODB.Recordset
Dim strTest As String
strTest = "test"
[Code] ....
The result I am getting looks like this:
9
8
7
6
5
4
3
2
15
14
13
12
11
10
1
I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.
I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
I am looking to have one formula containing two If Statements that minus.
=IF(B6="investment",C6,0)-IF(B7="gross",C6,0)
So the result of If Statement 1 minus the result of If Statement 2.
What I am seeing at the moment in the cell is FALSE and what I want to see is the sum.
If A1 shows 10:00am and A2 shows 4:00pm, then A3 calculates the total number of hours: =(A2-A1)*24
But if A1 shows "Off," then A3 shows 0: =IF(A1="Off",0,(A2-A1)*24)
Now, if I want to change "(A2-A1)*24" to another if-statement, how do I do this? I can always set up a hidden cell (A4) that contains the results of the first if-statement, and then say: =IF(A1="Off",0,A4). But can I do this without going through all the trouble of setting up hidden cells?
Each row represents a call. If a call in column A equals "CW" and it has the highest duration (H:MM:SS) value in column B, then provide me the date (MM/DD/YYYY) for that call that is stated in column C.
i.e.
Column A --- Column B ---- Column C
AB ------------ 0:02:22 ----- 04/14/2007
CW ----------- 0:03:13 ----- 04/16/2007
CW ----------- 0:01:42 ----- 04/13/2007
Thus, the value that should be returned is "04/16/2007".
I have a problem with a formula inserted with control+shift+enter
The formula is
MEAN(IF(' VALIDATION'!$G$2:$G$59999=D30;'VALIDATION'!$E$2:$E$59999))
In the Validation sheet I have the column G with values 0 and 1, and another column E with numeric values.
Changing the value of cell D30, the formula will calculate the mean of the values in column E that have a value equal to D30 in column G.
The problem is that this function works when D30=1 and not when d30=0, in this case the formula returns N/D.
I have tried using also text values instead of 1 and the formula works . The problem is only when D30 is 0
I am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."
(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:
=COUNTIF(IF(Analyses!$A$1:$A$10000=Summary!B8,Analyses!$DX$1:$DX$10000,""),">0")
(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.
I am trying to do is have a hyperlink go to another sheet after searching the second sheet for the same value. I have a sheet labeled "IQI" which has the total number of cases for a certain condition. I have another sheet labeled "IQI Cases" which lists out each case individually.
I want to be able to click on the Condidion in the IQI sheet and have that take me to that specific spot in the IQI Cases sheet where the cases for that condition begin.
Right now I just have a simple hyperlink to a range of cells. But each month a report is generated and the range will be different and I have to go and change the range each time. So I guess I want a hyperlink and a lookup function combination.
I dont know if this would be a Macro or a formula.
I am trying to use hyperlinks to navigate documents. I created a html document with excel and used hyperlinks to PDF documents.
At first the hyperlinks worked fine, opening the PDF software and in turn the PDF document.
Now when i click the hyperlink in Internet Explorer for the PDF document to open, it brings me to a blank HTML document.
In other words, the hyperlinks to the PDF's no longer open the PDF software and document.
Imagine if the word below was a hyperlink to a webpage somewhere;
House
I would like to know how to get excel to look at this paticular page and return that one word to a cell, so in this example, I would like cell A1 to to contain the word house.
I do not need any information about where the link is referring to, I already have this information.
All I need is for excel to look at this link and tell me what it is called.
I'm having a problem getting a hyperlink to work when adding it to a vlookup. The vlookup is looking at a page number and returning the named drawing from an Auto Desk Inventor File. I'm trying to get the returned drawing name to become a hyperlink to open the drawing. I would rather have this added to the formula so if a page number ever changes the hyperlink will change to the correct drawing also. Here is what I have so far but it is just returning an error of " cannot open the specified file". =HYPERLINK(IF(E5="","",(VLOOKUP(E5,'Inventor Import'!$A$2:$E$200,5,FALSE))))
View 4 Replies View Related"A12" says "Click for new line". I want that to be a hyperlink so if someone clicks it, it will automatically take you to a fresh new line to input there information.
Row 14 and above is a frozen pane.
Anything from row 15 below will contain data.
I could have 1,232 rows and the users who are using this spreadsheet probably won't fancy scrolling down for ages to find a new row to enter the information...
I have tried searching the forums and google but most of them explain how to use hyperlink with regards to different cells or worksheet or dedicated internet links.
i have a little twist to that and am unable to figure out exactly how to make that happen?
My requirements:
cell a3 has value 321011
now this needs to be hyperlinked iteself meaning
cell A3 will display the same value 321011 but should be hyperlinked to
http://support.microsoft.com/kb/321011
I have just been told that one of our servers is being replaced this weekend. I have thousands of hyperlinks in excel docs that reference this server. Other than manually reestablishing the links one by one to the new server, is there a way to do some kind of global change to replace the old server name with the new server name?
These are not hyperlink formulas, but rather Insert>>Hyperlink.
Or, is there a way to convert these hyperlinks to hyperlink formulas that would omit reference to the server and thus not be broken during the conversion?
Grasping at straws because I cannot envision having to relink these one by one.
how to create a Hyperlink to a specific worksheet in a workbook instead of just the workbook?
View 2 Replies View RelatedSuppose I have and excel workbook with 100 sheets and I want to click from one sheet to another. I created a table of all the sheets and hyperlinked the sheets then copy/pasted the table into each worksheet but that seems primitive. What if I have to revise the table? I will have to do it hundred times !
Is there a smart way to accomplish this using one smart master table that I can copy and paste into each sheet or somehting similar?
The idea
[Code] .....
Dropdown list
-------------
O11 = "Land" , "Sea"
P11 = "A - H" , "I - O" , P - Z"
Directory = C:MammalsLandA - HDate_120313 - Carnivore - Code_A3622
The list of filenames in the "A-H" folder has different dates and codes, how do I go about fixing wildcard *Carnivore* so that regardless of the date and code, there will be a match.
list of files in A-H folder
------------------------
Date_120313 - Carnivore - Code_A3622
Date_030213 - Herbivore - Code_A2231
Date_051212 - Hybrid - Code_A4431
I have a list of values in excel that represent image numbers (IMG_0001 etc...) in column A (A1:A703); hence representing my 702 images. I am trying to hyperlink each single image to its respective image which is located on my usb key all in one go (I don't want to hyperlink one at a time as it would take me for ages). Is there an easy way to do that?
View 1 Replies View RelatedI have a number of sheets with a "target" cell in specified rows that contains text and a hyperlink to a file (JPG or GIF). I need to modify the filename and pathname according to other values in other cells, then update the target cell text and hyperlink.
So far i have the old filename, path and hyperlink A also have the new filename, path and hyperlink And, i can set the target cell new text.
But how do I set the new hyperlink? I've tried variations on the theme of Range.Hyperlinks(1).Add Address = newHL but nothing seems to work - run time error 438.
How I set the new hyperlink?
I have a problem and i believe someone else has this too. I have an excel file which contains near 600 hyperlinks to different websites. But my problem is i cant open more than 1 hyperlink at the time and in that way going trough 600 websites would take like 4days, is there any program / Software, plug in, or ANY way open Many hyperlinks same time so i dont need to click 1 after 1?
I tried
Sub OpenUrl()
Dim r As Integer
r = 2
Do
Cells(r, 1).Hyperlinks(1).Follow NewWindow:=False, AddHistory:=True
r = r + 1
Loop While Cells(r, 1).Hyperlinks.Count
End Sub
I have got a hyperlink in cell A4 (see code below)
=HYPERLINK("mailto:Global_outbound_reporting?subject=" &A1,"Mail me")
(reason for subject being a cell is because it changes with time - part of a bigger macro). If I click this manually it loads the e-mail perfectly but I want it so that user doesnt have to click it and it runs upon click of an earlier button.
I have a hyperlink within Sheet1 (Functionalities) of my workbook that looks like this: ...
View 13 Replies View Related