Designing a proposal on MAC EXCEL 2011
1 workbook with:
1 page needs to print vertical
1 page needs to print landscape
Is this possible? (without reloading paper and printing a second time)
Right now I can only get it to print landscape OR portrait but not both ...
I have a worksheet with 2256 rows. I'm working with Student's total enrollments per grade level and I need totals from some of those rows stacked neatly into columns for distribution.
In my attachments, the starting workbook screenshot is what I am starting with, and the desired end result screenshot is what I need it to look like as the final result.
I have chart like below. In empty cells I want either 1 or 0 (1 if software is installed and 0 if not).
Excel
Outlook
Powerpoint
Word
Computer1
Computer2
Computer3
Computer4
Computer5
Data of computers and their software are like this:
Computer1
Word
Computer1
Excel
Computer1
Powerpoint
Computer1
Outlook
Computer2
Outlook
Computer2
Excel
Computer3
Outlook
Computer4
Outlook
Computer4
Excel
Computer4
Word
Computer5
Outlook
So called Matrix Lookup was very close, but it finds data FROM Matrix (aka that first table). Is it possible at all?
Excel and Windows version:
Excel 2010 SP1
Windows 7
I have data from (row 1, column 1) to (row 53, column 5) on 283 consecutive worksheets in a singular excel file that I would like to be presented on a singular worksheet starting from the data on worksheet 1 and descending to the data on worksheet 283.
I am looking for a copy and paste loop solution that will copy the data from each page and sequentially paste the results on a singular output page in descending order (worksheet 1 data, worksheet 2 data... etc) so that I can sort the data.
I have a worksheet that changes in length. There is a formula that calculates how many pages the sheet will be. The also is a print button on the sheet that will print a coversheet "Sheets("Title")" and then it is supposed to print the data on the second sheet. Below the code I have so far... I know I am missing something, but knowing very little about macros I just can't seem to figure it out.
View 2 Replies View RelatedI am trying to find a way to print an "entire workbook", but have each of the sheets paged as a group separate from the rest. One workbook typically has up to 20 sheets, with each sheet up to roughly 8 pages. I need each sheet set to show page 1 of 8 or page 5 of 8, not page 22 of 53. Counting and typing in the total number of pages in each sheet's footer is too cumbersome. Also, printing each sheet individually has also been cumbersome when printing to PDF. Are there any other ways to have the "&[Pages]" function only reflect the number of pages within the sheet instead of in the entire workbook?
View 9 Replies View RelatedHave very recently been upgraded to Windows 7 with Excel 2010 at work. On printing out a 10 page doucment, (all of which are landscape format), when vewing print preview, the first page is previewed as landsacpe, but subsequent pages are portrait.
If you change format of 2nd page to landscape all subsequent pages switch to landscape.
Have looked at a similar format document created last month and it behaves exactly the same. Whole document landscape but on print preview only first page is...
I was wondering if it's possible to create a macro that would check the range horizontally and vertically and return the resoults in a userform so that when workbook is open this userform would come up with the information who is due for refresher....
The sample book doesn't show the real size of the original matrix which has 190 employess and about 30 procedures so as you can imagine it's a pain.. to keep it up to date so I need something to flag that for me, yes I can see the red cells but still there's so many cells that I might easly miss some of them....
I have data in a vertical column how can i equate that data to a horizontal row in other sheet. how to do it by formula?
View 4 Replies View RelatedWhat kind of formula do I need that looks for a date and find all the names that have the same character on that particular day
In the example below cell R4 kooks for date R3 in range A1:L15 and find all cells that have a "G" and displays all the corresponding names from C1:L1
I prefer non array-formulas
I am using Excel 2010
I have over 800+ pages of chart that only takes up 6 columns and around like 9000+ rows.
I wanted to print this chart on paper and need hardcopies. However, the chart in its current setup prints only on the left half of the page leaving the right half empty.
How do i make use of the full space properly? Each chart has a "page number" on it so I want the chart to print continuously from one half of the page onto the next half and then the second page, third, etc.
Here is a visual demonstration of how things currently are and how i'd like to get them to be:
As you can see, This is the first of many charts and its numbered Page 9 and next one is page 10.
Pic1
How this looks when i try to print, it's only on the left side. right is all blank
Pic2
How i want it to look like upon printing
Pic3
As you can see in the last picture, once page 14 chart has no space it automatically continues chart on right side of page and then moves on to print rest.
[URL]
I have not found a suitable solution for arranging vertical data horizontally using VBA
I have number of data in column B arranged vertically in sheet1 how can we arrange the data in sheet 2 column B row 3 horizontally.
The vertical data keeps increasing when new data is added, so VBA code should search to the last line in Sheet1 column B.
All duplicate entries should not be repeated when arranging horizontally.
See attached for a clearer view : LOOKUP SEARCH.xlsx
View 10 Replies View RelatedI've been working on this for days, i still got no solution on what formulas I will put on cells in "To" tab. The excel file is composed of two tabs "To" and "From". We will convert the "From Tab" to "To" format. What formula will I put in D3 to V3 and drag down in "To" tab to convert datas from "From" tab.
View 9 Replies View RelatedI have to fill an invoice template, whereby I need to lookup the unit price in a pricing sheet, based on the effective date (horizontally placed) and the specific tasks to be invoiced (vertically placed).
The effective date cell (B1) is the one that can be changed, the formulas in the unit price cells (yellow highlighted) then needs to look up the price for that specific task in the table on the tab "pricing sheet".
I was trying something with INDEX / MATCH, but can't get it to work.
I've got the following complex issue:
...................Trader1 Trader 2 Trader 3 Trader 4 Trader5... Trader20 (Horizontal)
Commodity1 .....0.....2.....0.....1.....1
Commodity2 .....0.....4.....0.....-3.....0
Commodity3 .....1.....0.....0.....5.....0
Commodity4 .....0.....0.....2.....0.....0
.
.
.
Commodity 36 .....2.....1.....1.....0.....0
I have 5 cells that are basically a drop down list of all the traders, so the user can select up to 5 traders.
Once the user selects up to 5 traders (lets say Trader 1, 3 and 5 for our example) I have the following requirements to fulfill:
Displaying all commodities that have non-zero, non-negative values associated with those traders in a list somewhere.
For our example, this would then display:
Commodity 3
Commodity 4
Commodity 1
I have a problem that lookup vertical and horizontal corresponding values when there was duplicate values as it's only returning the first value found. What I want was to lookup the vertical and horizontal corresponding values on the left most & top most column based on the largest values column and also to return the duplicate values under the vertical and horizontal value column in ascending order if it's a duplicate values.
View 4 Replies View Relatedi have a data in columns and would like to convert into rows
e.g.
11 A B C D E F G H
22 1 2 3 4 5 6 7 8
33 2 3 4 5 6 7 8 9
44 3 4 5 6 7 8 9 0
and result should be
A 22 1
A 33 2
A 44 3
B 22 2
B 33 3
B 44 4
C 22 3
C 33 4
C 44 5
and so on ..
I have a list with entries in one column like this:
sourceText
empty cell
targettext
sourceText2
category2
targettext 2
and I want to change it like this:
sourceTextempty cell target text
sourceText2category2target text 2
Attached sample data. Sheet one as it is. Sheet 2 as I want them to be (I don't need any of the formatting in Sheet 2).
I have a table where I need to return a value according to THREE conditions:
1. Vertical, which is a shop code for instance
2. And 2 horizontal:
- One: segment (heading level 1)
- Two: product (heading level 2)
E.g. for "Shop1", what's the value for segment "PI" and product "Credit", etc.
An example file attached : fz73m5zEmZS6Y14-C.xlsx
The key thing for me is to do this WITHOUT changing data structure, because that really would be a huge pain. I mean, if it's no possible to do without changes (e.g. adding an extra column, etc.), I'll have to live with that I guess. But ideally I would really like to avoid changing data structure.
I have a huge data table, and I just can't seem to find a way to sum the numbers the way I want.
Here's an example of the table:
___ A B C A B C A B C A B C A B C
Jan 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
Jan 3 4 5 6 3 4 5 6 3 4 5 6 3 4 5
Jan 3 4 5 6 3 4 5 6 3 4 5 6 3 4 5
Jan 3 4 5 6 3 4 5 6 3 4 5 6 3 4 5
Feb 3 4 5 6 3 4 5 6 3 4 5 6 3 4 5
Feb 6 3 4 5 6 3 6 3 4 5 6 3 6 3 4
Feb 6 3 4 5 6 3 6 3 4 5 6 3 6 3 4
Feb 6 3 4 5 6 3 6 3 4 5 6 3 6 3 4
Feb 6 3 4 5 6 3 6 3 4 5 6 3 6 3 4
Mar 6 3 4 5 6 3 6 3 4 5 6 3 6 3 4
Mar 6 3 4 5 6 3 6 3 4 5 6 3 6 3 4
...
...
But, in essence, I need to sum together every value that's in January AND is in a column labeled "A".
I could just write up a bunch of "sumif=" functions but I feel like there's a simpler way.. I tried using "sumifs=" but I don't think it can handle horizontal AND vertical criteria...
I have the attached worksheet that I would like to know how to move the data from Vertical to Horizontal
Is there a set function to do this or does it require a macro?
I have a series of cash flows as follows:
Year 1 Year 2
Income 100 150
Expense 20 30
Net Income 80 120
I need to take the calculated "Net Income values" and also place them vertically by themselves, like this:
Year 1 80
Year 2 120
I know I can copy and paste the values easily using the "paste special... transpose", but how can I easily do this so that it continues to reference the original values? So that if I change the Income in year 1 of 100 to 120 the vertical Year 1 value would change from 80 to 100?
a_____b____ c_____ d_____ e______ f______ g_____ h_____ i
1 - 12/1--| 385 -| 15000 -| --etc--|| --etc--|| --etc--|| --etc--|| --etc--|
2 - 12/5--| 256- | 20000 -|
3 - 12/6--| 356- | 11000 -|
4 - 12/5--| -89--| -1000 --|
5 - 12/9--| 500- | 9000 ---|
Where d1:d5 e1:e5 f1:f5 and g1:g5 h1:h5 i1:i5 all have similar data.
Is there a way to have the data from def and ghi fall in line underneath abc with the condition being that there has to be something in the cell?
I need to do is to move data which is in 3 columns with multiple entries (ID) in first column to single entry in first column (ID) horizontally.
Currently three columns are ID, Code and Reply:
111 A D
111 B F
222 A I
333 B D
333 C F
What I would need is (ID, Code1, Reply1, Code2, Reply2):
111 A D B F
222 A I
333 B D C F
Is there a macro I could use for it?
I am trying to create a formula that will sum a range based on both horizontal and vertical criteria using the following data:
1
2
1
20%
25%
2
40%
25%
3
40%
50%
For example, if the horizontal criteria were "1" and the vertical criteria were "2", I need to sum the 20% and 40% amounts (60%). If the horizontal criteria were "2", and the vertical criteria were "3", I would need to sum the 25%, 25%, 50% (100%). I have tried using SUMIFS functions, but they do not appear to work with both horizontal and vertical axis criteria (I receive a #VALUE error).
I need a solution for the equivalent of a SUMIF combining both vertical and horizontal data. The vertical cells align to the horizontal ones, but they're in a different table.
My attempted formula is: =SUMIF($H$22:$H$30,"TRUE",D7:L7)
*note that this is just an example set of data...my real data set is much larger (both rows and columns)
I need to be able to do this without transposing any of my data.
Things I've tried:
- Another option I tried was making D7:L7 a named range and using the transpose function (as an array) within the SUMIF formula above. I received an error.
- I tried using a bunch of IF statements added together (i.e. =IF(H22=TRUE,D7,0)+(H23=TRUE,E7,0)...); this actually works properly, but I get the "formula too long for cell" error when I put them all in (too many characters)
I'm using excel 2003 and windows XP professional.
How am I able to extrapolate data from vertical to columns?
I.e.
From:
ColumnA ColumnB
Field 1 Result 1
Field 2 Result 2
To:
Column A Column B Column C Column D
Row 1: Field 1 Result 1 Field 2 Result 2
This is different than Transpose.
I am tasked to plot some client satisfaction data on a monthly basis. I want to be able to show the client satisfaction with different aspects of service delivery. Can have a chart with "Good", "Fair", and "Poor" on the vertical axis with months on the horizontal axis?
View 1 Replies View RelatedI need to transpose or move some of the data on Column B to horizontal position, is there a formula that I can use to do this? Attached is sample of what I want to do.
View 14 Replies View Related