Excel 2010 :: Print Hundreds Of 6 Column Charts Using Maximum Page For Printing
Apr 28, 2013
I am using Excel 2010
I have over 800+ pages of chart that only takes up 6 columns and around like 9000+ rows.
I wanted to print this chart on paper and need hardcopies. However, the chart in its current setup prints only on the left half of the page leaving the right half empty.
How do i make use of the full space properly? Each chart has a "page number" on it so I want the chart to print continuously from one half of the page onto the next half and then the second page, third, etc.
Here is a visual demonstration of how things currently are and how i'd like to get them to be:
As you can see, This is the first of many charts and its numbered Page 9 and next one is page 10.
Pic1
How this looks when i try to print, it's only on the left side. right is all blank
Pic2
How i want it to look like upon printing
Pic3
As you can see in the last picture, once page 14 chart has no space it automatically continues chart on right side of page and then moves on to print rest.
[URL]
View 7 Replies
ADVERTISEMENT
Nov 23, 2011
Have very recently been upgraded to Windows 7 with Excel 2010 at work. On printing out a 10 page doucment, (all of which are landscape format), when vewing print preview, the first page is previewed as landsacpe, but subsequent pages are portrait.
If you change format of 2nd page to landscape all subsequent pages switch to landscape.
Have looked at a similar format document created last month and it behaves exactly the same. Whole document landscape but on print preview only first page is...
View 3 Replies
View Related
Nov 26, 2013
I've prepared an excel file (excel 2007) with some tabs that contains several charts (4 to 6 charts). When I want to print this file, the sheets with the charts on it doesn't print properly. I have set the print area to cover the charts only and then set it to fit on 1 page but the charts will not scale to fit.
I read somewhere that this is an excel bug - is there a workaround for this?
I could resize all my charts smaller but only as a last resort.
View 1 Replies
View Related
Oct 16, 2013
I have a sheet that changes the number of columns based on data from other sheets. This is the only sheet in the workbook that I will print out every day. I have it set right now to fit all columns on one page, however sometimes this will result in the bottom 1/3rd of the sheet not being used. If I use fit all rows on one page, then some of the columns will get cut off. Is there a way to scale in both directions? My guess is there is not, but I thought I would ask because it would work great for me if I could.
View 4 Replies
View Related
Jan 30, 2009
I am after a code that will sort out the below printing problem
I want excel to hide ALL OF column E from the printer, i want to see the information myself but when i press print, column E will not show on my printed page
i have found this
Private Sub Workbook_BeforePrint(Cancel As Boolean)
If ActiveSheet.Name = "Sheet1" Then
Cancel = True
Application.EnableEvents = False
Application.ScreenUpdating = False
With ActiveSheet
.Range("e1").EntireColumn.Hidden = True
.PrintOut
.Range("e1").EntireColumn.Hidden = False
End With
Application.EnableEvents = True
Application.ScreenUpdating = True
End If
End Sub
but am not sure how to enter it, also if the code is correct. I have entered it using the alt+f11 then clicked on this sheet, and put it in there but it still dont work
View 9 Replies
View Related
Dec 10, 2012
Using Excel 2010: I have 2 rows (A4:J4 & A5:J5) selected as print titles that I would like to be printed at the top of selected pages. Currently, my document is 3 pages long, and I would like to have the print titles only applied to the first 2 pages. More data will be added in the future on pages 1&2 but the last page (whatever page number it ends up being) should not contain the selected print titles.
View 2 Replies
View Related
Mar 18, 2014
Designing a proposal on MAC EXCEL 2011
1 workbook with:
1 page needs to print vertical
1 page needs to print landscape
Is this possible? (without reloading paper and printing a second time)
Right now I can only get it to print landscape OR portrait but not both ...
View 2 Replies
View Related
Feb 18, 2014
I have a work sheet named "Main_List"...In column D starting with "D2" I would like to list worksheets that I would like to have printed via VBA.
The workbook has several hundred worksheets and I would like to list in column D only worksheets that I would like to print with VBA code.
View 3 Replies
View Related
Feb 4, 2014
I was wondering with regards to the max of 32,767 characters in a cell.
1) is it still the same number of characters in excel 2010?
2) is that including spaces or not?
View 7 Replies
View Related
Aug 30, 2013
She has a spreadsheet created in Excel 2003 (she is still using 2003) which contains an image with a textbox in the top left corner then all other cells contain data.
When user prints this spreadsheet all that prints is the image and the textbox.
I have cleared the print area reset the print area removed the picture (prints only the text box)
and none of these changes have changed what prints.
I have checked all printer setting and these appear normal.
previously user could print this spreadsheet fine and all other worksheets in the workbook print fine as well.
other users are still able to print to the same printer correctly from this spreadsheet.
View 2 Replies
View Related
Sep 29, 2011
I have a simple problem. I have many worksheets which all contain data in the first four columns. I want to be able to create a chart (a scatter chart) in the first worksheet which plots the data on that worksheet and then format it how I want it to look. This I can do.
Next, I want to copy and paste that graph into all the other worksheets, but have the pasted graphs display the data in that worksheet.
As it stands, in Excel 2010, all the pasted graphs keep showing the data in the original worksheet irrespective of which worksheet I now have them in. This seems to be different to older versions of Excel and is very annoying and has to be changed by hand which is very time consuming.
How can I make charts that don't have the worksheet name in the cell reference, or how can I paste a chart so that is updates the references to the same row and column but in the new worksheet?
I know I could copy and paste the entire worksheet and then manually copy the new data into that copy of the worksheet - but that is not a real solution to this problem.
View 2 Replies
View Related
May 21, 2009
I have a report that I use and right now I have a command button that prints the report x2. What I would like to do is to have it print one in color and one in grayscale. I could do this I think with two different buttons, but I would like to utilize just one. I tried creating a macro but it did not pick up the fact that I changed the properties to black and white.
View 2 Replies
View Related
Jul 29, 2014
1) What's the maximum limit of IF statements in a formula for MS Excel 2010?
2) I have 8 nested IF statements, but I am having trouble with the False part of the argument. I was able to get the False part to work for the 4th argument (because I simply put a comma and closed it's respective colored parenthesis) but the following 3 I can't seem to get and the following message pops when I hit enter "The formula you typed contains an error."
For the False part of the remaining 3 nested statement which is at the end of the formula I just type:
IF($E$2="Q3"........)))IF($E$2="Q2".....)))IF($E$2="Q1")))
And close it's respective colored IF statement argument. I tried putting a comma at the end of each False part for the arguments but it pops with the message "You've entered too many arguments for this function."
View 9 Replies
View Related
Apr 5, 2012
How I could create a chart (standard column) with an average line in Excel 2010?
View 4 Replies
View Related
Sep 19, 2012
I am looking for a way to manipulate xy data graphically by moving points in an excel scatter plot. This functionality was present in older versions of excel, but I can't seem to do it in the MS office 2010 version.
View 1 Replies
View Related
Jan 15, 2013
I'm working on a macro that does the following:
1. Pull data from the internet
2. Perform calculations on the data
3. Graph the calculated values
- As I run the macro, Excel dies in step 3, where I graph the calculated values.
- It works about 5% of the time and gives me the "Excel has stopped working" error 95% of the time - I can't isolate any difference in the attempts
- I've located the area in the macro where it dies, but I can't identify the exact line since it seems to shift around in this area
- It works perfectly fine when I step through using F8
- I've attempted DoEvents and Application.Wait to debug. Application.Wait for 5 seconds allows the macro to work about 50% of the time and increases in efficiency the longer I wait
- Steps 1 and 2 work perfectly fine (I've used that code in many macros), so I'm pretty sure the issue is in the below code:
I'm running Windows 7, Office 2010
Code:
'Chart variables
Sheets("Summary").Select
Dim ChartRange As Range
[Code]....
View 4 Replies
View Related
Apr 27, 2013
I am using Excel 2010 to create a simple chart. When I enter the information, highlight it and select a chart, the chart area appears blank. It doesn't matter what kind of chart I choose- it still appears blank. I've tried going into the Advanced options and indicating for All objects to be shown and that didn't work.
View 1 Replies
View Related
Nov 14, 2012
i have product group,product name and the statistics. I'll use an example of students with score. I have these set of data:
A B C D
1 Student Name Score Sum
2 Student1 Anna 48 80=Sumif(A:A,A2,C:C)
3 Student1 Anna 32 80
4 Student2 Tom 30 80
5 Student2 Tom 30 80
6 Student2 Tom 20 80
7 Student3 June 55 60
8 Student3 June 1 60
9 Student3 June 4 60
Now we have 2 students with tied highest scores with 80 Scores. Naturally i want the rank to be as follow: Top1 Anna since she has the highest score "48", and Top2 Tom, and Top3 June.
The problem is, the score data can vary and Top3 can probably have the highest score and he still didnt make the highest score collectively. And there will also going to be other situations as well because im working on a very large data set, and not these 3 students.
the max score is tied, and since im making another column with sum scores, the data is going to be redundant, and hopefully theres a formula to ignore this.
View 2 Replies
View Related
Aug 23, 2013
Excel 2010. I have a workbook that has multiple sheets where some have headers and others do not. Some sheets are static in that no user input is required and others are dynamic so the toal number of pages per worksheet may vary based on how much information the user inputs.
An example:
Sheet 1 is static and requires no input, it does not have a header or a page number. For compliance reasons this sheet must be printed on top of all the other sheets in this policy
Sheet 2 is dynamic. This sheet can range from 2 pages to 5 pages depending on user input. This sheet must have page numbers starting with 1 and it must have a header on page 2 through the last page, but no header on page 1.
I am currently using a worksheet_activate sub to input data into the headers and footers of sheet 2. This works very well and puts the data where I want it to go just by using the "Different First Page" option in the headers design tab.
The problem arises when I select both sheets to print. Excel now thinks Sheet1 is the first page, so the first page of sheet 2 now has a header and the page number beings at 2 instead of 1.
Where I can stop this from happening?
Current sub:
Code:
Private Sub Worksheet_Activate()
' If WS is activated, place information in header
Application.ScreenUpdating = False
'Policy #
[Code] ..........
As I said, this works all well and good for when I'm just printing Sheet2 but when I have to print Sheet 1 & 2 together, it no longer prints the way it should. There are times when Sheet 2 will be the first page of the overall document but there are a few instances where it will be second to Sheet 1 and I run into this issue. Is there a way to specifically reference which headers/footers the code will input the data?
View 1 Replies
View Related
Feb 5, 2014
I have a 2010 Excel spreadsheet where I have a macro set up to print the page. What I need it to do though is to increase a number in a cell and display it each time I print the page.
View 9 Replies
View Related
Nov 2, 2013
I'm trying to dynamically populate ranges to facilitate dynamic charts being generated.
I use excel 2010 at work, and 2011 for mac at home.
Dynamic chart ranges populated from named ranges as selected in nested indirectly sourced validation lists
I want any selection made in a dependent validation list which contains a list of named ranges to trigger a worksheet_change event which copies the range the selection points to and pastes it into a dynamic range in another column, beginning as a specified cell.I've tried using this, put together from some code examples from similar, but different issues.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("B2")) Is Nothing Then
Range(Range("B2").Value).Copy
Range("P2").Paste
End If
End Sub
Trouble is, I don't really understand this code. It doesn't appear to do anything when I make a worksheet change in "B2", but I don't know exactly what it is. I suspect that perhaps the fact that "B2" is validated from an indirect source might be difficult?
View 8 Replies
View Related
Jul 29, 2011
We have just refreshed our entire printer fleet to Xerox printers and as part of the project we have selected all defaults to B&W and duplex.
On a multi sheet excel file, If we click print then choose entire workbook and then change the print options to colour, it prints the only first worksheet in colour, and all the others in mono. i have read that excel treats each worksheet separately and does not cascade the changes made made in the first worksheet even if all sheets have been selected.
How can I get them all to print in colour?
We can set up another printer and change the defauts to colour but we dont want to go down that road and have 2 printers installed for each model.
Is there any code out there can will/ can change the properties of the first worksheet and cascade this throughout the workbook.
We use XP and W7 workstations and office 2003, 2007 and 2010. By the end of the year all workstations will be W7 and Office 2010.
View 2 Replies
View Related
Jun 12, 2013
I have an excel 2010 file that we export (save) to HTML so we can upload to our website.
1) Can I add a search box to the top of the page?
2) Can I freeze the row headings?
View 1 Replies
View Related
Jun 17, 2013
using excel 2010, I would like a macro that will insert a page break every time a row is blank. There are two blank rows between each data row which I need to be separated.
View 9 Replies
View Related
Jun 29, 2007
I need a macro that will print a hidden page that is linked to the page I have active.
It needs to be able to find the correct hidden page that corresponds to the active page because there are multilple pairs of the hidden/visible pages. The name of the hidden page is the same as the visible one with "printout" added to the end. When created, the sheet code names are sheetn and sheetm; n and m being consecutive numbers.
View 3 Replies
View Related
Apr 23, 2012
My office recently upgraded to Office 2010 and we would like (in the accounting department that I work in) to change the default number formating in a blank sheet to Number, 0 Decimals, using seperators, from the current default of general format number.
I have looked for the Book.xltx file to replace but can't see it any where.
View 5 Replies
View Related
Jun 11, 2013
I have a user here at my company that is having a strange issue with Excel. When she moves a page break in her document, Excel freezes up, then once it finally makes the change (if it doesn't crash), some (but not all) of the images that are in the document resize to super small.
For instance, she may have 50 rows. Each row contains a column with an image, then a few other columns with product information. Changing a page break may cause ten of the images to become tiny for no apparent reason. Resetting page breaks seems to cause the document to explode, with cells being thrown all over the page into different locations and columns becoming uneven.
When I make the same change on the same document on my system (both using similar specs and Office 2010), this does not happen.
View 1 Replies
View Related
Mar 9, 2013
Getting some web page data into Excel 2010 using VBA. My scenario however is set up with the following titles in cell A1, B1, C1, D1 and E1 : POST CODE, OUTLET, ADDRESS, TELEPHONE, EMAIL
The result I want to achieve is I enter a post code into cell A2 for example, Excel then uses IE to navigate to the relevant web page as defined in the VBA code. I then want the following to happen:
The InnerText of the web page's h1 tag is then inserted into the OUTLET cell (B2)The first instance of the p tag is then inserted into the ADDRESS cell (C2)The second instance of the p tag is then inserted into the TELEPHONE cell (D2)The third instance of the p tag is then inserted into the EMAIL cell (E2)
All instances of the p tag are contained in a div element called div class="adBox_content" . There are also 5 other DIVs above that DIV in the hierarchy.
Using the YouTube tutorial link, the method has worked for me using the getElementsByTagName("h1").innerText
However, when I try adding a second getElementsByTagName("p")(01).innerText the whole thing fails.
So I'm left with two problems; I can't make the VBA get more than one element at a time from the page, I can only either have the h1 or the first instance of the p tag. I've tried all the getElementBy methods and none of them seem to work in getting the second and third instances to show.
I also need the code to make the data be put on the same row ONLY as where the post code was entered. In this scenario for example of entering a post code into A2, the OUTLET needs to land in cell B2 only, ADDRESS C3 only etc.
By following the youtube tutorial above by giving the cells names to refer to in the code, the data ends up being inputted in all further rows with identical cell names. I need it to not do that.
The code is needed for around 300 rows of post codes that will be entered and refreshed every week or so.
View 9 Replies
View Related
Dec 3, 2011
Using Excel 2010.
I am building a dashboard and would like to maximize the print area so everything fits on 1 sheet 8 1/2 x 11 landscape.
My settings at this point:
Margins:
Top 0.25
Right 0.25
Bottom: 0.25
Left 0.25
Row Height 7.5
Column Width 1.29
Seems small, I know but as I develop charts, titles, infographics, etc... I will merge rows and columns as needed so as to leave just enough white space for clarity while packing critical information into 1 sheet.
My problem - as I keep playing with maximimizing number of columns and rows Excel keeps scaling. Is there a way to calculate the correct number of rows and columns to maximize the available space?
View 2 Replies
View Related
Jun 14, 2014
We have a schedule that creates an Excel file which separates each order by blank rows. I need each order to be separated by a page break, so each order prints on a separate sheet.
Each order entry is 1 or 2 rows
Using Excel 2010/2013 although the file produced is an xls file.
Columns A to J are populated
Rows 1 & 2 are the header
I have tried a macro that involves me doing a countif and counting entries in the row, and if they add to 10 it inserts a page break, but its bit long winded and only seemed to work once.
View 3 Replies
View Related
