Excel 2010 :: Printing Multi-page Document?
Nov 23, 2011
Have very recently been upgraded to Windows 7 with Excel 2010 at work. On printing out a 10 page doucment, (all of which are landscape format), when vewing print preview, the first page is previewed as landsacpe, but subsequent pages are portrait.
If you change format of 2nd page to landscape all subsequent pages switch to landscape.
Have looked at a similar format document created last month and it behaves exactly the same. Whole document landscape but on print preview only first page is...
View 3 Replies
ADVERTISEMENT
Apr 28, 2013
I am using Excel 2010
I have over 800+ pages of chart that only takes up 6 columns and around like 9000+ rows.
I wanted to print this chart on paper and need hardcopies. However, the chart in its current setup prints only on the left half of the page leaving the right half empty.
How do i make use of the full space properly? Each chart has a "page number" on it so I want the chart to print continuously from one half of the page onto the next half and then the second page, third, etc.
Here is a visual demonstration of how things currently are and how i'd like to get them to be:
As you can see, This is the first of many charts and its numbered Page 9 and next one is page 10.
Pic1
How this looks when i try to print, it's only on the left side. right is all blank
Pic2
How i want it to look like upon printing
Pic3
As you can see in the last picture, once page 14 chart has no space it automatically continues chart on right side of page and then moves on to print rest.
[URL]
View 7 Replies
View Related
Mar 18, 2014
Designing a proposal on MAC EXCEL 2011
1 workbook with:
1 page needs to print vertical
1 page needs to print landscape
Is this possible? (without reloading paper and printing a second time)
Right now I can only get it to print landscape OR portrait but not both ...
View 2 Replies
View Related
Mar 14, 2013
How do I add a password to protect the PDF that I create from my excel 2010 document?
View 5 Replies
View Related
Apr 12, 2013
I have an Excel 2010 spreadsheet which I need to print to PDF. There is a simple "Save as" PDF option which always fails with just the message "Document not saved". I created a simple test sheet with just a few numbers on to check it isn't due to complexities with the particular workbook. This works on my home PC (Windows 7) but not on the Windows 7 Club PC which is where I need to run it to generate the output which eventually will go to the club's website.
It also fails the same way if I try to create an XPS file (although I don't want an XPS file).
This fails from the normal user interface "Save As". I also tried it from a VBA macro and run it: I get Run-time error '-2147467261 (80004003)' Document not saved
I've googled endlessly but all the references I tried failed to uncover a solution. I was a bit surprised that this doesn't seem particularly common and most of the reports seem to be a couple of years old or older (no workarounds were useful).
View 1 Replies
View Related
Mar 21, 2013
I have a problem concerning sending an active word document via mail. I have a worksheet with various information in it, that I am exporting to a word document. I then want to send the word document via email. I want to do this without saving the changes in the word document. I am working with excel 2010. I have posted some of my code below.
VB:
Sub letter()
Dim myWord As New Word.Application
Dim adr As Variant
[Code]....
I get the following errormessage: "Compile error. Wrong number of arguments or invalid property assignment"
View 2 Replies
View Related
Jun 30, 2014
In my Excel 2010 workbook I wen through File > Info > Check for Issues > Inspect document. But as it's shown following, it doesn't show anything. Why?
Capture.jpg
View 5 Replies
View Related
Nov 8, 2012
I have a long bit of code that at one point saves a Word document and then saves it again with a new name and the old (legacy) .doc extension.
This all works find when the user is running Office 2007. However, it errors out for using Office 2010. The reference libraries are all correct (as far as I know).
Code:
Dim myDoc As Word.Document
Dim saveAsName as String
saveAsName = "some text here" + ".doc"
myDoc.Save
myDoc.SaveAs fileName:=(saveAsName), FileFormat:=wdFormatDocument
View 9 Replies
View Related
Oct 2, 2012
Excel 2010, Windows 7: Is it possible to password protect an Excel document at an "Administrator" or a executive level. I want to grant access to the document, and the ability to manipulate it as they choose, to everyone with the password but prohibit them from changing the password once they are in.
View 1 Replies
View Related
Jul 23, 2006
Is it possible to Change Start Page Of Multi Page UserForm Based on 8 CommandButtons. on a WorkSheet, for example.
CommandButton1
UserForm1.MultiPage1.Value = 0
CommandButton2
UserForm1.MultiPage1.Value = 1
CommandButton3
UserForm1.MultiPage1.Value = 2
CommandButton4
UserForm1.MultiPage1.Value = 3
Could I use 1 multipage UserForm Instead of 8 UserFoms. Is it better to use 1 multipage UserForm with 8 pages or 8 UserForms. I dont know if this make sense or not?
View 2 Replies
View Related
May 21, 2009
I have a report that I use and right now I have a command button that prints the report x2. What I would like to do is to have it print one in color and one in grayscale. I could do this I think with two different buttons, but I would like to utilize just one. I tried creating a macro but it did not pick up the fact that I changed the properties to black and white.
View 2 Replies
View Related
Aug 23, 2013
Excel 2010. I have a workbook that has multiple sheets where some have headers and others do not. Some sheets are static in that no user input is required and others are dynamic so the toal number of pages per worksheet may vary based on how much information the user inputs.
An example:
Sheet 1 is static and requires no input, it does not have a header or a page number. For compliance reasons this sheet must be printed on top of all the other sheets in this policy
Sheet 2 is dynamic. This sheet can range from 2 pages to 5 pages depending on user input. This sheet must have page numbers starting with 1 and it must have a header on page 2 through the last page, but no header on page 1.
I am currently using a worksheet_activate sub to input data into the headers and footers of sheet 2. This works very well and puts the data where I want it to go just by using the "Different First Page" option in the headers design tab.
The problem arises when I select both sheets to print. Excel now thinks Sheet1 is the first page, so the first page of sheet 2 now has a header and the page number beings at 2 instead of 1.
Where I can stop this from happening?
Current sub:
Code:
Private Sub Worksheet_Activate()
' If WS is activated, place information in header
Application.ScreenUpdating = False
'Policy #
[Code] ..........
As I said, this works all well and good for when I'm just printing Sheet2 but when I have to print Sheet 1 & 2 together, it no longer prints the way it should. There are times when Sheet 2 will be the first page of the overall document but there are a few instances where it will be second to Sheet 1 and I run into this issue. Is there a way to specifically reference which headers/footers the code will input the data?
View 1 Replies
View Related
Feb 5, 2014
I have a 2010 Excel spreadsheet where I have a macro set up to print the page. What I need it to do though is to increase a number in a cell and display it each time I print the page.
View 9 Replies
View Related
Sep 19, 2013
Windows 8, Excel 2010
I have XYZ Coordinates for a continuous 3-D line that has numerous segments. I want to input a distance along that line, and have it create the XYZ coordinates at that point. See Image for reference.
Row 2 is my start point - I input the initial coordinates here - this point is the origin of the 3-D line
Column B is where I want the calculated Y value to go for each point
Column C is where I want the calculated X value to go
Column D is where I want the calculated Z Value to go
Column E is the how far along the 3-D line that the (to be calculated) point should be at. (MD1)
Columns G, H, & I are given to me, and I use this data to generate the coordinates in Columns J, K, & L
Column O is the cumulative length of the line at that coordinate. (MD2)
Basically, I had planned on writing a formula to:
Find the coordinates of the point who's MD2 (column O) is before the desired point's MD1 (column E)Find the coordinates of the point who's MD2 (column O) is after the desired point's MD1 (column E)Subtract MD's (column O) to get the length of the segmentFind the distance along that segment that MD1 (column E) fallsUse that distance to traverse along that line to the desired point.
View 1 Replies
View Related
Jul 29, 2011
We have just refreshed our entire printer fleet to Xerox printers and as part of the project we have selected all defaults to B&W and duplex.
On a multi sheet excel file, If we click print then choose entire workbook and then change the print options to colour, it prints the only first worksheet in colour, and all the others in mono. i have read that excel treats each worksheet separately and does not cascade the changes made made in the first worksheet even if all sheets have been selected.
How can I get them all to print in colour?
We can set up another printer and change the defauts to colour but we dont want to go down that road and have 2 printers installed for each model.
Is there any code out there can will/ can change the properties of the first worksheet and cascade this throughout the workbook.
We use XP and W7 workstations and office 2003, 2007 and 2010. By the end of the year all workstations will be W7 and Office 2010.
View 2 Replies
View Related
Jun 12, 2013
I have an excel 2010 file that we export (save) to HTML so we can upload to our website.
1) Can I add a search box to the top of the page?
2) Can I freeze the row headings?
View 1 Replies
View Related
Aug 9, 2009
I need a macro for printing a document, Could anyone supply me with the macro. And how to acivate it and sve in the sheet
View 5 Replies
View Related
Feb 16, 2012
I am having a problem formatting a chart in Excel 2010. My chart has multi-level category axis labels, and I would like to have a vertical grid line separating each major group of categories. In Excel 2003, I could right-click on one of the gridlines and then specify the spacing I wanted between gridlines. In Excel 2010, as soon as I indicate that I want multi-level category axis labels, I get a vertical gridline between each category and I am unable to alter the spacing. If I deselect the multi-level axis label option, I can adjust the spacing between the vertical gridlines, but the axis multi-level label functionality is lost. Is there a way to fix this problem without having to resort to using the drawing tools or text boxes to achieve the desired results.
View 3 Replies
View Related
Jun 17, 2013
using excel 2010, I would like a macro that will insert a page break every time a row is blank. There are two blank rows between each data row which I need to be separated.
View 9 Replies
View Related
Apr 23, 2012
My office recently upgraded to Office 2010 and we would like (in the accounting department that I work in) to change the default number formating in a blank sheet to Number, 0 Decimals, using seperators, from the current default of general format number.
I have looked for the Book.xltx file to replace but can't see it any where.
View 5 Replies
View Related
Jun 11, 2013
I have a user here at my company that is having a strange issue with Excel. When she moves a page break in her document, Excel freezes up, then once it finally makes the change (if it doesn't crash), some (but not all) of the images that are in the document resize to super small.
For instance, she may have 50 rows. Each row contains a column with an image, then a few other columns with product information. Changing a page break may cause ten of the images to become tiny for no apparent reason. Resetting page breaks seems to cause the document to explode, with cells being thrown all over the page into different locations and columns becoming uneven.
When I make the same change on the same document on my system (both using similar specs and Office 2010), this does not happen.
View 1 Replies
View Related
Mar 9, 2013
Getting some web page data into Excel 2010 using VBA. My scenario however is set up with the following titles in cell A1, B1, C1, D1 and E1 : POST CODE, OUTLET, ADDRESS, TELEPHONE, EMAIL
The result I want to achieve is I enter a post code into cell A2 for example, Excel then uses IE to navigate to the relevant web page as defined in the VBA code. I then want the following to happen:
The InnerText of the web page's h1 tag is then inserted into the OUTLET cell (B2)The first instance of the p tag is then inserted into the ADDRESS cell (C2)The second instance of the p tag is then inserted into the TELEPHONE cell (D2)The third instance of the p tag is then inserted into the EMAIL cell (E2)
All instances of the p tag are contained in a div element called div class="adBox_content" . There are also 5 other DIVs above that DIV in the hierarchy.
Using the YouTube tutorial link, the method has worked for me using the getElementsByTagName("h1").innerText
However, when I try adding a second getElementsByTagName("p")(01).innerText the whole thing fails.
So I'm left with two problems; I can't make the VBA get more than one element at a time from the page, I can only either have the h1 or the first instance of the p tag. I've tried all the getElementBy methods and none of them seem to work in getting the second and third instances to show.
I also need the code to make the data be put on the same row ONLY as where the post code was entered. In this scenario for example of entering a post code into A2, the OUTLET needs to land in cell B2 only, ADDRESS C3 only etc.
By following the youtube tutorial above by giving the cells names to refer to in the code, the data ends up being inputted in all further rows with identical cell names. I need it to not do that.
The code is needed for around 300 rows of post codes that will be entered and refreshed every week or so.
View 9 Replies
View Related
Mar 18, 2014
I am my excel worksheet (excel 2010) I have one cell that changes every day (number). I want this number to open my htm document and replace the same number in a string in the htm and save/close this.
An example:
My htm document is located at C:/ and named XX.htm
The number I want from excel is in cell A1 in sheet1, and the worksheet is located in D:/ named yy.xlsx
And the text(number) I want to replace is in the following string in the htm document, in this string it is 72, next day it can be 30:
src="Bilder/72.png"
View 8 Replies
View Related
Jun 14, 2014
We have a schedule that creates an Excel file which separates each order by blank rows. I need each order to be separated by a page break, so each order prints on a separate sheet.
Each order entry is 1 or 2 rows
Using Excel 2010/2013 although the file produced is an xls file.
Columns A to J are populated
Rows 1 & 2 are the header
I have tried a macro that involves me doing a countif and counting entries in the row, and if they add to 10 it inserts a page break, but its bit long winded and only seemed to work once.
View 3 Replies
View Related
Jan 15, 2014
Why when I drag the dotted blue page break line does it sometimes break the entire doc into one page per cell ?
The doc is not wide. When I first load I can drag the break line successfully. Then I print preview... select print on both sides... boom.. goes from 4 pages to 14. Then I go back to page break view... drag the line... boom... Hundreds of pages. Even if I revert back to printing on one side it still is messed up.
How do I make this stop?? What am I doing wrong?? Office 2010
View 1 Replies
View Related
Feb 17, 2009
I need a script that will turn a excel doc into a txt doc. Thats the easy part. The hard part (at least I think it is), is I need it to be in a certain format and I'll do my best to explain that fomat below.
View 9 Replies
View Related
May 21, 2014
I am trying to setup a search page in a worksheet on a document. I want to be able to search by an indicator (DID#), but there maybe multiples of the same (DID#) in the data. I want to be able to have each instance of the multiples displayed on the search page. In addition, I want to reference other data that matches that (DID#) in separate cells.
Please see below, I want to have a search area that I can input the DID# and have a return of the corresponding info for that row. If I search "123" there are 2 entries and will need both displayed. The data is much bigger, but this is just a sample.
Date
DID#
Location
Type
Owner
12/13/14
123
Anywhere
Flooring
RL
[Code] .........
View 2 Replies
View Related
Oct 25, 2009
Can i have the caption of a multi-page tab caption change on the result a given cell?
i.e. in the attached example i would like page 1 to be the result of B2.
View 8 Replies
View Related
May 26, 2006
what is the differance between a multi page control and a tab strip control
View 4 Replies
View Related
May 8, 2008
I need to create a macro code to adjust the width of the columns so it fit in one page for printing. So If it only has 3 columns, the widht will be wider but if it has 200 columns then the width will be much smaller.
View 2 Replies
View Related
