I have a list of data that is 23K rows deep and need to match to eliminate duplicates. I know how to match but have been unable to format a key column to eliminate the leading apostrophe (e.g. 'KJM03390) from a mixed alpha-numeric field.
View 5 RepliesIs there a way to eliminate N/As using conditional formattting...i am thinking of changing the cells color to white if it's value is N/A...
View 9 Replies View RelatedI have a vlookup function that requires the lookup values to be text, and I have a long list of numerical lookups.
My problem is that I need to go through all these numbers one cell at a time and change them to text. I've tried the easy way of highlighting the cells and formatting them to text but it doesn't work
All that works is adding an apostrophe at the beginning of the number which is VERY time consuming.
My question...
What is the apostrophe doing and why can't I do the same by highlighting and formatting as text.
An apostrophe has appeared at the beginning of the words and/or numbers in the cells. I have tried using the "Replace" feature to remove these apostrophes and it won't work. I need to remove the apostrophes so I can upload our inventory, as the SKU must be pulled exactly.
View 3 Replies View RelatedI can't remove the apostrophe mark from the cells. There are cells appearing to be blank but they all contain a single apostroph (like this ' ) if I click on them. Whenever I tried to replace them excel said cannot find a match...
View 3 Replies View RelatedI have a formula who examines if they are the same. The last number at first quote is not a problem (the 45). The problem occurs only and allways when the horse's name have an apostrophe " ' ". In first example apostrophe is different from the usual. If i manually delay it and replace it - type keyboards apostrophe everything works fine. Obviusly its a symbol. I want a small macro for replacing all these symbols at, lets say column B ,where these names are located. How can i use substitute at this case?
I have to match up two columns of data from different sources.
In one column the apostrophe is being sorted as a space, in the other it is being ignored.
e.g
Col A
Misty
M'Lady (ignored)
Mohayer
Col B
M'Lady (read as space)
Misty
Mohayer
Most advice I see concerns removing hidden leading apostrophes which is not the case here, others recommend Control and H to find and replace. This should work but does not as Excel does not seem to read the apostrophe at all.
I have tried Text to Columns > Delimited > Other ' to remove and then would have done =A1&B1 to put the text back together, but again this just does not read the apostrophe.
,I have the following Macro:
VB:
Private Sub Workbook_Open()Worksheets("Sheet1").ActivateRange("$B$1").SelectSheets("Sheet1").ScrollArea = "A1:z25"End Sub
Now I want to disable the above such that I am able to add an Apostrophe ( ' ) in front of every line of this Macro. Is there a shortcut for this or do I need to Manually add apostrophe in front of every line? And then after disabling if I need to re-enable it is there a shortcut to that too?
I have a perfectly fine formula but whenever I try and use VBA to enter it for me it adds a leading apostrophe and it ruins the INDEX/MATCH with an RTE 1004.
View 5 Replies View RelatedOn exporting information from another database to excel the fields which are text in nature, these are always exported as with an apostrophe at the beginning of text into the excel cell. I can do nothing about this as the export to excel is a defined routine which i have no control over.
Unfortunately due to the amounts of data, I am handling 10,000 lines, the physical removal of this apostrophe at the beginning of the text in each cell is not a good way forward.
The apostrophe is to indicate it is a text string, I have tried edit find and replace looking for the apostrophe with no luck.
It is important for me to remove the apostrophe as it then allows the text which is in fact a hyperlink to be live
I receive a lot of spreadsheets which contain numerical data where each cell has been forced to be text by a leading apostrophe.
how to strip the apostrophe out so I can process the data, please?
I know the apostrophe is a hidden character, so I can't use Find & Replace, and using MID or RIGHT doesn't seem to work, either, even if I Copy and Paste Special as Values.
Is there an alternative to manually editing every single cell?
formula to strip apostrophe for lookup formula to recognize text as a number.
View 9 Replies View RelatedI searched through some pages of old threads but could not find specifically one solution for performing the subject task on text strings in cells.
I have a lot of Excel files which contain both numerical data and text strings where each cell has been forced to have a leading apostrophe appended to the left side of the text strings and numbers.
How can I strip the leading apostrophe out?
I know the apostrophe is a hidden character, so I can't use Find & Replace.
I would like to figure out some VBA so that I could build this into and automate this via a macro I'm working on.
Is there a way to comprehensively do this for all cells containing text and numbers in a worksheet?
I'm trying to format an Excel 2010 spreadsheet so that I can import it into another application. I need to convert a number to text with four digits and a leading apostrophe - '0000 for example. How do I do this without having to type everything in manually?
View 14 Replies View RelatedThere is a spreadsheet I use at work where we are told to use an apostrophe before the date to prevent the function bar from converting the dd/mm/yy to dd/mm/yyyy. Why does the apostrophe do this?
View 4 Replies View RelatedI imported the data from someone. And the cell in the column comes with the single quote'infront of the cell value. For example, the value that you see in the cell is "920-F-Y", but if Click on that cell, it turns out to be '920-F-Y, there's a single quote infront of it. I can't do a replace all on that single quote to empty space for some reason. Might just be my excel, or there's just something wrong. The problem is, I have 2 sources of data. I imported the first one, it has the single quote infront of it, i imported the second one, it has no single quote infront of it. I want to do a comparison, but I can't because it's different by single quote.
You can open my attachment, and try to replace that ' (single quote) with a space, and excel will complaint that it can't find it. I could go through each one and delete it individually, but consider that there are 5000 cells, it's just a lot of work.
I use the GetObjects function to gain access to the properties of a mailbox and want to fill out a table with some detail information. The code works fine until I have a mailbox which name has an apostrophe included.
Set o = getobjects("winMgmts:!\VS1
ootMicrosoftExchangeV2:Exchange_Mailbox.LegacyDN='/O=TEST/OU=TEST/cn=Recipients/cn=co'brien',MailboxGUID='{59A40254-9F12-4502-9A03-3FB5CB0BBD38}',ServerName='VS1',StorageGroupName='sg1',StoreName='mb1'")
I highlighted the section that causes the problem. The string within the string is encapsulated in apostrophes, hence the apostrophe in the mailbox name co'brien confuses the code and raises an error. Microsoft provides a solution by using escape characters, but that seems to work only in vbscript, not in vba. Here is a link to Microsoft's solution:
http://www.microsoft.com/technet/scr...4/hey1217.mspx
I tried some workarounds that are being used for a similiar problem with SQL statements as well, but again without success - these are the versions I tried:
co/'brien
co'brien
co''brien
I needed to change a formula to text before copying it to other cells. I did this with a Replace command: Replace> Find what: =IF( then Replace>Replace With: '=IF( Now I need to remove the apostrophe to turn the text in all the cells back to formulas. When I use the Replace>Find what: '=IF(and Replace>Replace with =IF(I get an error message saying that "Microsoft Office Excal cannot find a match".
View 4 Replies View RelatedI have a lot of Excel files which contain both numerical data and text strings where each cell has been forced to have a leading apostrophe appended to the left side of the text strings and numbers.
How can I strip the leading apostrophe out?
I know the apostrophe is a hidden character, so I can't use Find & Replace.
I would like to figure out some VBA so that I could build this into and automate this via a macro I'm working on.
Is there a way to comprehensively do this for all cells containing text and numbers in a worksheet?
I want to alert a user that he or she has typed in a text string that begins or ends with an apostrophe ' or begins or ends with a quotation mark " so that they can take corrective action in removing these characters. The reasons for this are superflous to this post but what I thought was a logical answer returns a formula error. Here's the scenario:-
A user enters a string of text in cell A1.
Cell B1 checks if the text, if any, in A1 begins or ends with a ' or a " and if it does, returns an "Error" message
The formula I've tried in B1 is =IF(OR(LEFT(A1,1)="'",LEFT(A1,1)=""",RIGHT(A1,1)="'",RIGHT(A1,1)=""")),"Error","Ok") but Excel will have none of it.
Hello, I am trying to update a person's finances for this past year. She sent me a workbook that has two sheets with macros. The first sheet is linked to the 2nd. When a name and number is typed into the first sheet it automatically shows up on the 2nd.
My problem is, no matter what number I change on the first sheet under amount, the Total cell on the 2nd sheet gives me the #Value error. I have not changed anything, have not deleted any formulas but no matter what I do, that value error always shows up. I know very little about excel but I thought I knew enough to be able to update this book for her. Is there a special way I should be inputting the numbers on the first sheet so that the value error will show the running total instead of an error?
One of the multitude of areas where I still need drastic improvement is with efficiency. Specifically, avoiding loops.
Are any of you aware of any good, basic level sites, blogs, posts, etc., about better methods or processes? I'm not particularly experienced with programming (I've been a software TESTER for 13 years and just started some programming in recent months), so the more basic the better.
I d like to use a macro where I will put in my personal.xls in order to check and delete , and N/As from any given worksheet
View 9 Replies View Relatedafter i use some formula, when it is not found, it will display 0 or #NA or #REF!.
How i can hide it from printing?
I have a spreadsheet with data in all different rows.
I'm trying to delete all the blank cells in between.
I tried go to special, blank, and delete cells,
but for some reason, the excel doesn't select all the blank cells.
It only selects a few blank cells, which is really strange.
Is it possible to eliminate gridlines from only certain rows, columns and or cells? Specifically, I would like to eliminate the gridlines from the frozen columns and rows.
View 5 Replies View RelatedI have a table of data like this:
A , 1 , 1
B , 2 , 1
C , 3 , 4
D , 1 , 3
E , 3 , 3
I need to eliminate duplicate entries WITHIN a row. So, I need the table to become:
A , 1
B , 2 , 1
C , 3 , 4
D , 1 , 3
E , 3
Is there an easy way to do this for a large sample? Also, there are actually more like 8 columns of this data, if thats important.
What is the quickest way to eliminate .Select, .Selection and .Activate from code to increase efficiency?
How do I refer to the range and workbook without selecting them first?
I'm trying to write a macro that will loop to the end of each row, if the last cell is a number it will cut and paste that whole row into another sheet, if the last cell is a word then it will leave it as it is.
View 3 Replies View RelatedI am using the formula below to count the unique items in column M. Two questions, how can I use the whole range M:M, but then also ignore the header because that would return 3. I tried repacing M2:M6 with M:M but I get #NUM!. I'm using 2003 but when I take this back to work I will be on 2007. If using the whole range M:M is not possible then I could just extend out to M2:M7000 which should cover the range.
PAS Sheet
LM1Count of PASPAS22FD093 FD094 FD645 FD646 FD64
Spreadsheet FormulasCellFormulaL2=SUM(IF(FREQUENCY(MATCH(M2:M6,M2:M6,0),MATCH(M2:M6,M2:M6,0))>0,1))
Excel tables to the web >> http://www.excel-jeanie-html.de/index.php?f=1" target="_blank"> Excel Jeanie HTML 4