Apostrophe: Fill Out A Table With Some Detail Information
May 25, 2007
I use the GetObjects function to gain access to the properties of a mailbox and want to fill out a table with some detail information. The code works fine until I have a mailbox which name has an apostrophe included.
Set o = getobjects("winMgmts:!\VS1
ootMicrosoftExchangeV2:Exchange_Mailbox.LegacyDN='/O=TEST/OU=TEST/cn=Recipients/cn=co'brien',MailboxGUID='{59A40254-9F12-4502-9A03-3FB5CB0BBD38}',ServerName='VS1',StorageGroupName='sg1',StoreName='mb1'")
I highlighted the section that causes the problem. The string within the string is encapsulated in apostrophes, hence the apostrophe in the mailbox name co'brien confuses the code and raises an error. Microsoft provides a solution by using escape characters, but that seems to work only in vbscript, not in vba. Here is a link to Microsoft's solution:
http://www.microsoft.com/technet/scr...4/hey1217.mspx
I tried some workarounds that are being used for a similiar problem with SQL statements as well, but again without success - these are the versions I tried:
co/'brien
co'brien
co''brien
View 4 Replies
ADVERTISEMENT
Apr 16, 2012
I have a pivot table that has about 20 categories of Asset Numbers as a filter. I use the show pages function to create individual sheets for each category, but I don't want pivot tables to be the output; I want the detail from the pivot table (the rows that are displayed when you double-click the grand total). I have been messing around with various macros, but can't seem to find the right commands to get this output.
View 9 Replies
View Related
Jun 17, 2013
Recently our IBS provider change something in their data. As a result after the export I can no longer use
HTML Code:
Set PTCache = ActiveWorkbook.PivotCaches.Create( _
SourceType:=xlDatabase, _
SourceData:=Range("A1").CurrentRegion)
I had to change the SourceData to:
HTML Code:
Set PRange = WSD.Cells(1, 1).Resize(FinalRow, FinalCol)
Set PTCache = ActiveWorkbook.PivotCaches.Add(SourceType:= _
xlDatabase, SourceData:=PRange.Address)
Since I have done this when I get to this statement
HTML Code:
Cells(FinalRow - 1, FinalColumn).ShowDetail = True
It no longer creates "Table1". Which sends a Subscript out of Range error on this statement
HTML Code:
ActiveSheet.ListObjects("Table1").Range.AutoFilter Field:=10, Criteria1:= _
">0", Operator:=xlAnd
ActiveSheet.ListObjects("Table1").Range.AutoFilter Field:=12, Criteria1:= _
"
View 1 Replies
View Related
Nov 19, 2006
When you double click on a number in a pivot table data area you get a new sheet with that information showing the detail, is there anyway to "trap" this action?
I want to run a macro on the detail data but can't see a way to do it automatically, have tried, BeforeDoubleClick, PivotTableUpdate, NewSheet events but all have there draw backs if you are doing something other than showing the detail for the pivot table. Of course I can just run the macro after the sheet is made but it would be nice to do it on its own.
View 9 Replies
View Related
Dec 9, 2008
I have recorded the below macro to select a pivot table field (on demand) and show the information on anthother sheet tab.
Obviously if the order of the fields change then the macro is buggered, any ideas so it only selects the on demand field and shows that info.
Sub Macro1() ....
View 9 Replies
View Related
Jul 27, 2004
When you create a pivot table and double-click on the output of the pivot repot you access the detailed info that make up this particular number.
Is it possible to preserve the format of the raw data file that has been used to create the pivot table output?
For instance, the raw data has $. When I create the pivot table I can format the table to reflect the $. However, when I double click on the pivot table number where I have the $ I access the detail info but the format (in this case $) is lost.
I called Microsoft and told me it is a flaw in Excel. But, I'd like to check with you before I give up.
If I can't do that. I have an alternative: double click on all the numbers of the pivot table then format the sheets to include the $ and then create a hyperlink from the pivot table to the detailed report tab.
View 9 Replies
View Related
Nov 23, 2009
i need to get some information (price) automatically put into another cell when an item from a drop down list is selected, i have attached a workbook to show what i need to do,,,basically if i choose an item from a list in cell a1,,i want cell b1 to show the price of the item,,,and the item is referenced from sheet 3 as well as the price.
View 2 Replies
View Related
Jan 16, 2009
I have been helping a friend keep track of his clients, by making a form for them to fill out when they become a client of his (he owns a care rental) and I made a spread sheet for him to keep track of which cars are out when...
With that said, I would really like to have a Macro that i could run, when the form with all the personal information about hte client had been filled out - take that information and pull it over into another spead sheet that keeps track of all clients.
Meaning that workbook 1 is set up as a booking form and workbook two is just a normal list. I can make a macro that pulls over the infomation - but the problem is that it will always pull the information into row 1. Meaning that it overwrites itself each time I run it. I would like the Macro to know that it has to fill the information into the next empty row.
View 9 Replies
View Related
Aug 1, 2008
I have created a spreadsheet that I must fill out daily. this worksheet has averages that must be automtically shared with a "master" worksheet.
for example
information from sheet2!b23
information from sheet3!b23
information from sheet4!b23
etc...
must automatically be transfered to
sheet1!c6
sheet1!c7
sheet1!c8
etc...
in that order
at this time I am typing in =sheet2!b23 on sheet1 everytime, I want to avoid this.
If you are asking yourself why? I dont blame you but it needs be this way so I can average each days spreadsheet.
View 5 Replies
View Related
Nov 8, 2013
I'm wondering if it is possible to make a table where I can just enter the reference number and excel can fill up the remaining cells with data specific to the reference number from a website. What I mean is that I would like to put in company registration number and hopefully it will be able to pull in other data from companies house website about the company.
View 2 Replies
View Related
Oct 23, 2008
I have inserted the sheet. As you can see in Sheet 1 I have the Store, Address, Town etc, I would like a drop down box in D13 ( Store Name ) so when I select a store it will automatically fill all the info into D15:D19 Address, Town etc. The info will be pulled from Sheet 2.
View 3 Replies
View Related
Jun 24, 2009
I would like to automatically color fill a series of rows based on like information from a single column. When the information in the column changes then the rows would either stop filling (this would be best) or fill with a different color until the information changes again.
Summary: series of alternating rows would either be filled or unfilled based on changes from the column information.
Hope this isn't too confusing. Below is an example except I would want the cells filled, not the text or numbers to change. The highlight is changing based on the changing of the numbers.
ABCD 12345
ABD 12345
ABCD 12349
ABDF 12349
ABCD 12358
ABF 12358
View 9 Replies
View Related
Nov 22, 2011
If you have a data in two dimensional table. and you need to fill each cell with the value returned from another table.
Example : this the my table
Company A Compay B Company C Product 1
Product 2
Product 3
Product 4
and this my data :
Products Companies Price
Product 1 Company 8 Product 1 Company A 7 Product 1 Company B 5 Product 1 Company C 6 Product 2 Company B 6 Product 2 Company C 9 Product 3 Company A 10 Product 3 Company B 8.8
View 5 Replies
View Related
Aug 29, 2007
I currently have a table with a range of headings (row & column), and the necessary data for it. On a new worksheet, I have a table with only a few of the headings, and I was wondering if there was a macro that would automaticlly match the headings of the new sheet with the other table, and fill in the ncessary dat, as on the other sheet.
View 3 Replies
View Related
Aug 31, 2009
I have an 'existing results table' as per my attached sample. From this table I need to create a list of 'sold' for each annual date range - i.e. I need a separate list for items sold within that date range. see my example in red. *Note. I am working with Excel07 however my attached sample is in Excel03 because I couldn't upload an XLSX file.
View 4 Replies
View Related
May 26, 2014
check the table in the attachment.
I only want the top row / filters (A1 - H1) to be displayed on Table 1 but keep the functionality of it.
Is it somehow possible to hide all the information below A1-H1 or put it on another table and let Table 1 refer to it?
The table is mostly in German but it shouldn't matter.
View 2 Replies
View Related
Apr 23, 2014
Look at the Picture Below I Want that the Cell that marked with Red Arrow Returns a "Rank" Value in the Table, Which is a "Blaster" Rank. And I want That Cell Also Automatically Changed When "Blaster" is Changed to "A.A.Z Gonz" or etc. What Functions that i have to choose, INDEX? XL.jpg
View 6 Replies
View Related
Apr 1, 2009
I am not sure how would I go about finding the last data entry in a table and using formula to extract information. Attached excel 2007 file to better understand. Need formulas for cell B20 and E20. You can use column A as a reference if it is easier as this column is counting the number of entries and the next value will simply be a +1 to the last value entered in column A(or 75 in our case).
For Cell B20: Need to calculate the days difference between todays date (Cell A20) and the last entry date(in this case B5, this will change as new data will be entered). A subtraction of two dates would suffice - my problem is that I do not know how to find the last entry on the table and use it. You have to remember that table gets updated and new entry will be added so then cell B20 should give the difference between A20 and the last date entered.
View 2 Replies
View Related
Nov 28, 2009
I have a table on sheet 2 consisting of 120 rows and 8 columns, on sheet 1 I have a combo box and have used INDEX to display the values for each row that I select. what I want to be able to do is edit the INDEX data on sheet 1 and then have a button that will replace the old value in the table on sheet 2 with the new value.
View 5 Replies
View Related
Dec 20, 2011
1. Below I have a sheet stock, which show the maximum qty stock should be by code and size
Sheet Stock:
*ABC1CodeSizeQty Max Should Be
21250011273125003113412500499512500580612500614471250073308756049997560913210826021491182603180128
26041761382601143014978026220159780273701697802838017978029310189780302901997803117020756081992175601250
2. Here is a Sheet sold Article
Sheet Sold Article:
*ABC1CodeSizeQty Sold2125001123125003841250062257560436756092378260278826011999780261610978028271197803013129780312913756014
3. Here is pivot table from sheet sold article, which show the qty sold by code and size
PT-Qty Sold: 1
*ABC1
2
3Sum Of Qty
4Code
[Code]....
4. But I want to get additional information in column F form sheet stock that we always keep max stock of each sold article as shown below.
PT-Qty Sold: 2
*ABCEF1
Qty Max Should Be2
3Sum Of Qty
4Code
Size
Total
[Code]....
Is it possible to get information above in column F by using Formula VLOOKUP in column F or any other formula, without modifying any data layout?
View 6 Replies
View Related
Nov 20, 2013
Name
Rock
POP
HIP POP
Alex
1
Jimmy
1
1
TOM
1
So this what I want the Macro to do, example the above table shows peoples name and the type of music they like.
So I want the Macro to extract the information into "sheet 2" of the excel as follows.
This is how sheet 2 would look like.
Alex
1 Rock
Jimmy
1 POP 1 HIP POP
TOM
1 POP
Note how for Jimmy who had 1 for pop and 1 for hip pop, is in the same cell.
View 4 Replies
View Related
Mar 30, 2008
I need to find a forumula that will enable me to transfer values from a table within the worksheet. Something along the lines of if I13 = A16 then need to enter the number that appears in A17 into cell 019, if I13=B16 enter number in B17 into 019. I also need the forumula to include if the figure in 113 is less than 3 then need to enter 0 into 019.
View 14 Replies
View Related
Aug 21, 2009
Basically I have two groups of data
Group 1 is machine info and has
Serial Number Build Month Commission Month
Group 2 is warranty info and has
Serial Number Service Claim Value of Service Claim
What I need to do is for all machines built in a given month count the number of claims within a given number of months after commissioning and the total value of the claims.
Eg
If I have a machine serial number abc123 built in jan 07 and commissioned mar 07 I need to search the table of data in group 2 for the number of claims between mar 07 and may 07 and also the total value of those claims
View 6 Replies
View Related
Sep 11, 2009
I need to have a cell (Total) but I need to be able to enter the information which all the subtotals are inputted into that area and will be the subtotals of the total. I have two areas that I will need to keep a running total of for each job #.
I'm not sure how to find out how to do this as I'm not that advanced with excel.
View 5 Replies
View Related
Jan 14, 2014
I have some data that I have created a report from. However it doesn't show a "true" picture for the stat we want. I have a pivot table set up with data showing the hours worked for an individual. What I am wanting to do would be to cross reference the data but not sure how to compare data. I have provided some make shift data to see if it is even feasible. The end goal is to get a true picture of P.P.H The data we are able to get is in a horrible format. I would eventually like to automate this in VBA but will work on the later. I thought about doing a vlookup but the is no real matching data for all employees. Some of the names are wrong in one system and there is no matching emp ID.
View 3 Replies
View Related
Aug 13, 2014
What I would like a macro to do is take information from cells A1 to P1 on sheet1 and add them to the table in sheet2 and then I can save the workbook. The information in A1 to P1 is taken from other cells around the workbook. Once the information is in sheet 2 I can delete or change the informtion in sheet 1 without it affecting the copied information in sheet 2.
The next time I open the workbook I can enter the information in cells A1 to P1 on sheet1 then run the macro again and will then take the information and add it to the bottom of the table in sheet2 underneath the previous information that had been added - obviously the source of this information will now be deleted.
I will need to do this again and again building up the table in sheet2. The table will also use columns A to P like in sheet1.
View 7 Replies
View Related
Nov 5, 2007
I have a vlookup function that requires the lookup values to be text, and I have a long list of numerical lookups.
My problem is that I need to go through all these numbers one cell at a time and change them to text. I've tried the easy way of highlighting the cells and formatting them to text but it doesn't work
All that works is adding an apostrophe at the beginning of the number which is VERY time consuming.
My question...
What is the apostrophe doing and why can't I do the same by highlighting and formatting as text.
View 9 Replies
View Related
Nov 5, 2006
I need to create a form that if you were to enter a name in the text box it would fill all the information across that row into other boxes on the form. Basicly if I type John Doe in the text box it would look in col A for John Doe and then put whats in the cells on that row into different boxes on my form. I have tried searching but I have had no luck. Im very new to forms so this is a great experience.
View 3 Replies
View Related
Nov 19, 2013
Is there a way to edit my database located on sheet 1 using the advanced filter (output) on sheet 2?
I have a gigantic database and I want to filter it down to the rows I need to edit.. so I used advanced filter to extract the rows I need on to another sheet. But if I edit the rows on sheet 2 how do I makes those changes reflect on sheet 1 (the full database)
View 2 Replies
View Related
May 19, 2014
What I have is a list of selected employees, with the site they work at next to them.
What I need is a macro which looks at the site they work at, references it with an address table in a separate worksheet and then pastes the site address along with the employee's name onto a thrid worksheet which will be used to print post labels.
>Look at which site the employee works at (Sheet 1, D:D)
>Find the address of said site (Sheet 3)
>Paste the relevant address along with the employees name (Sheet 1, B:B) into a separate worksheet.
This will be done weekly, and I need the macro to either only work on the latest's weeks table, or to just work with the current active selection. Any better way to layout my table.
View 12 Replies
View Related
