Row Of Active Cell Selected
I know how to select an entire row, but if I want the "row" with active cell to be highlighted when I press enter, or the down arrow key, is there a way to do that (mainly for ease of viewing).
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Function Which References Active Or Selected Cell
I have a spreadsheet which shows a matrix in pounds. But I would like to have a reference cell somewhere near the top which will automatically show the conversion to kilos of any selected cell. Is anyone aware of a function which will do this? For example, one pound equals 0.45359237 kilos. Cell A1 contains the reference function to the active of selected cell. If I click on B1 which contains 12, cell A1 would automatically show 5.45. If I click on cell C1 which contains 20, cell A1 would automatically show 9.09. So I’m thinking it would be something like =SelectedCell/0.45359237 or maybe =ActiveCell/0.45359237
View Replies!
View Related
Range Copy: Differ Depending On The Active Cell That's Selected
The rows will differ depending on the Active Cell that's selected and I don't know how to specify this. The range I want to copy is from Column B to DA on the worksheet ("Staff") which I want to paste to another worksheet ("Leavers"). This is as far as I got 'FindRemove = lstRemove.Value 'If FindRemove = "" Then End ' Goes to the start of the Data column 'Sheets("Staff").Select 'Range("B4").Select ' Tests current cell against FindRemove 'Do 'If ActiveCell.Value = FindRemove Then 'Call CopyPerson 'Exit Sub 'Else: ActiveCell.Offset(1, 0).Select 'End If 'Loop Until ActiveCell.Value = "" 'End Sub
View Replies!
View Related
Insert Row On Sheet & Move Active Cell Row To It
I would like to create a macro that could archive entries from one sheet and insert them in another. I created one but the problem is that the entry has to be the same row each time. Example: Sheet 1 – is current jobs and sheet 2 is old jobs. My macro moves an entry from Row A-5 of Sheet 1 and moves it to the top of Sheet 2. I would like to be able to scroll through each entry select it and have it moved to the top of the Old Jobs sheet.
View Replies!
View Related
Highlighting Active Cell's Row, Along With Any Row That Shares Same Value In That Column
Is it possible to click on a cell in column C, and have the wishlist below happen: That active cell's row is hightlighted. Any cell in that column that has the same value as active cell is also highlighted. Plus, any cell in another sheet that has that value it's row is highlighted too. Example: I click on C5 in Sheet 2 its value is 45000789 it row is highlighted, this value also appears in C3 in the same sheet, so it's row is highlighted as well. Plus, in sheet 1 in C10 this value appears and it's row is highlighted as well. When any of the values are clicked again the highlight is removed from all parties.
View Replies!
View Related
Insert Row At Active Cell With Formula From Fixed Row
I want to insert a new row that contains the formulas of a fixed row (1:1). The inserted row is changeable and is determined by whichever is the current active cell. Eg: Active cell is something random like E16 I want to add a new row but don't want a blank row - rather want a row that contains the properties of 1:1
View Replies!
View Related
Use Value Of Active Cell To Name Row
I'm trying to take the value of a cell and use the value as a name for the row. If cell a1 has value = June. I want to change the name of row 1 to June. I'm not sure what I'm doing wrong with the following code. Sub Name_a_row() ' ' Dim TheName As String Dim RowNum As Integer TheName = ActiveCell.Value RowNum = ActiveCell.Row ActiveWorkbook.Names.Add Name:="TheName", RefersToR1C1:="=Data!R&RowNum"
View Replies!
View Related
Use Active Cell For Row Number
There is a chart encompasing column A, B and C. The column D has certain numbers stored in its cells. All I wont is to build a code which would check the value of the cell in column D which is in the same row as the active cell, and then paste certain date into the active cell - basing on the value of the cell in column D. Here an example: Sub pasteif() first one) column D has 'if the value is i.e 2 then it should paste into the active cell whatever there is in Range F1:G1 'if other value is present in this case in cell D1 (it is always the D column) then other range would copied into the active cell Range("F1:G1").Copy ActiveCell.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False End Sub
View Replies!
View Related
Highlight Row Of Active Cell
Is it possible to have a specified shading (say 50%) applied to all rows except the currently picked row and the header rows to allow a user to focus on inputting across the row? I'd use this in conjunction with " Move Selection After Enter" to "Right" so the user would stay on the same row. I've tried the Help function, but can't find anything.
View Replies!
View Related
Delete Row Of Active Cell
I have a macro for deleting a row. I want iit to delete the row that I have selected, that is i if I mark cell B22 I want it to delete row 22. But it deletes the row under it, that is 23. Sub Tabortrad() Dim intRadnr As Integer Dim intStartrad As Integer Dim intSlutrad As Integer intRadnr = ActiveCell.Row intStartrad = ActiveSheet.Range("Första").Row + 1 intSlutrad = ActiveSheet.Range("Sista").Row - 2 If intRadnr < intStartrad Or intRadnr >= intSlutrad Then MsgBox "Kan inte radera denna rad. Placera markören på en av bokföringsraderna mellan rad " & intStartrad & " och rad " & intSlutrad - 1 & "." & Chr(13) & "En ny rad kommer att infogas under den rad där markören står.", vbOKOnly, "Felaktig rad markerad".......................
View Replies!
View Related
Range In Same Row As Active Cell
I'm looking for a piece of code, which would activate a certain Range i.e. the start of which would be in column A and the End in Column G. My problem is that the activated range of cells shuld be exactly in the same row as the currently active cell i.e. active cell B3 -> activated range A3:G3 .
View Replies!
View Related
Select Row Where Only 1 Cell Is Selected
I need to delete part of the row where one cell is selected. If more than 1 cell is selected, I want a msgbox. Example: I have any cell selected on row 26. I want to select all cells in this row including column C thru column AD. Column A & B are not to be deleted. After the selection is made, I want the row deleted and the below cells moved up.
View Replies!
View Related
Highlighting The Row With The Selected Cell
I work with many sheets that have many data columns and have used a "greenbar" formula in conditional formating but would like to have a similar formula that highlights the current row. If possible, it would be nice if this new formula would not wipe out all other formatting as it moves. I have seen Ivan's work at www.mrexcel.com/hof001.php but it says that it wipes out other formatting. The formula that I am currently using is =MOD(ROW(),3)=2 Is there a way of getting the current row number so that it could be =ROW()=(current row number) ?
View Replies!
View Related
Return Active Cell's Location/row
I'm having trouble identifing a way to return a location for the position of the active cell. I've searched Excel help with "Position, location, return, activecell, etc." and I can't seem to figure this out. I know that it's possible, so that's why I'm on here! ... Ok, say the active cell is currently "F1", and I need the location "F1" to identify the ROW to be used in a formula later, how would I go about that? The current contents of cell "F1"' will be "REPLACE", but I need to change the words "REPLACE" in "F1" and other cells labeled "REPLACE" in column F to the following formula (where the "1" in "A1" is is the current row):
View Replies!
View Related
Merge Range Based On Active Cell Row
I am working on a macros that creates a new row for every data entry. Below is the macros that I have. In the new row, I want for the cells in columns F through O to merge right after creating the row. How do I go about this? If Sigma = 0 Then Selection.EntireRow.Insert ' New row for new entries ActiveCell.Value = "NONE" ActiveCell.Offset(1, 0).Select End If
View Replies!
View Related
Macro: Select Cell A Of Selected Row
Currently working on a project for university and still learning how to use macro. Got a problem which im sure is an easy solution for all you experts out there. As shown in the picture; http://img300.imageshack.us/img300/1205/macrohelp.jpg. When the Sap number is entered (from A19 and onwards), it copies the value to cell B10. The general code is used below.
View Replies!
View Related
Change Color Of Row When Cell Is Selected
I have a spreadsheet containing many rows of data that I need people to review. After reviewing the data in the column, a reviewer must enter comments in the right-most column and then hit the Enter key to move to the next row down. What I'd like to happen -- As a reviewer selects the cell where they need to enter data, I want the entire row to highlight. I can use conditional formatting to change the color of the row once data is entered, but I want to change the color of the row when a specific cell is selected. I've attached a sample spreadsheet.
View Replies!
View Related
Set Variable To Row & Active Cell Column
I have a sort procedure I have been working on. Sort By Active Cell Column Now I would like to make sure the row of the activecell.column is row 7. I tried Private Sub comp_myMonthlyReport_SortAscend() Dim rng As Range With ActiveWindow rng = .ActiveCell(7, .ActiveCell.Column) End With Selection.Sort Key1:=rng, _ Order1:=xlAscending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom End Sub But I receive this error: Run-time error '91': Object variable or With block variable not set
View Replies!
View Related
Pick Data From A Specific Row/column (eg 10/B) Related To Active Cell
I have a spreadsheet with my Periods along row 10. e.g. C10: "1", D10: "2", E10 "3", F10: "4", G10: "5" etc. (green on the attached sheet). I have my departments along column B, e.g. B11: "Baked" B12: "Fresh" B13: "Frozen" (yellow on the attached sheet) what I need and cannot work out is some VBA code that will populate two variables (lets call them Period & Department) when I click on one of the figures. For example if I click on cell: if I click E14: Period would have the contents of cell E10, and Department the contents of cell B14. if i click G14: Period would have the contents of G10, and Department the contents of cell B14 again. I know how to get the click on the cell to work properly etc, and I have code to slot these variables into that works very nicely, I just can't get this bit to work!!!!
View Replies!
View Related
Find All Row Values Selected In Multi Column ListBox & Fill Adjacent Cell
I have a listbox that has row and columns. The rows are combinations of options and the columns are Additives. After selecting a row in Listbox1, (first column are names) i would like the value of the second column to goto a specific area.... find that value and in the cell to the right of it place a "Y". The "Y" would indicate that "yes" it was part of the selection row of the listbox. Same for third column, forth, fifth and sixth. The result from the listbox is a number of Y's and N's in the result page. Then making all that were not part of selected line and equal to "N" to hide row (height = to zero). Listbox and expected result are in attached example worksheet. The attached does show the need much better then I can explain it.
View Replies!
View Related
Elseif Statement In Vba: If The Selected Cell Falls Between 1/01/06 And 31/01/06 Then Jan Would Be Selected
Basically it is a if statement saying that if the selected cell falls between 1/01/06 and 31/01/06 then Jan would be selected. The end part is not a problem; I’m just not sure how to write the one line of code that would test if the cell falls between the two dates. I attemped to create it as shown in the code attached below but wasn't successful. I used an else if statement to test the other 11 months. Sub test() Dim SelectDate As Range Set SelectDate = Range("SelectedDate") If selectedDate >= 1 / 1 / 2006 And selectedDate <= 31 / 1 / 2006 Then ActiveSheet. PivotTables("PivotTable1").PivotFields("PnLDate").CurrentPage = _ "Jan" ElseIf selectedDate >= 1 / 2 / 2006 And selectedDate <= 28 / 2 / 2006 Then ActiveSheet.PivotTables("PivotTable1").PivotFields("PnLDate").CurrentPage = _ "Feb"........................
View Replies!
View Related
Insert Range-named Row At User-selected Row
On the first row of a spreadsheet template is a <hidden> contiguous series of conditionally formatted cells (range name "stdRow" =production!$1:$1), with formulas, that I want a user to be able to easily insert at whatever row they might be in a worksheet. If, for example, the user is at D24, then clicks the [InsertRow] button that I have positioned at the top of the worksheet (in a fixed pane), I want the attached macro to insert an instance of "stdRow" directly underneath the user position (at row 25, in this case). The use's position should still be at D24 when the macro finishes. If the user clicks the button multiple times, multiple rows should be inserted (again, without changing the user's position). This is what I have tried so far:
View Replies!
View Related
ACtiveCell.row: Active Row Is Empty
I am trying to write a statement that sees if the the row below the active row is empty. I have written the following but it is wrong. Please can someone correct it for me? Thanks! If IsEmpty(ActiveCell.Row.Offset(1, 0)) = False Then MsgBox "Not Empty" End If
View Replies!
View Related
Highlight The Active Row
if you click on a row, it highlights every cell in it, I want to do the exact same thing but then also when you click on a cell only. Preferable (probably impossible though) without the use of VBA, because in my company I think some are "carefull" with enabling macro
View Replies!
View Related
Use Active Row In A Formula
I am wanting to use the row number of the current active cell in another formula on a spreadsheet. I have only been able to find info in putting the active row number in a dialog box. Is there a method of returning the active row number and using in a number of formulas.
View Replies!
View Related
Highlight Active Row
I spend a lot of time in spread sheets working with part numbers and sales figures. With a part # in column B and sales per month in adjacent columns, stretching back years. Is there any way to highlight an entire row automatically? ie. I use Ctrl F to search for a number and it goes to B24. I now want the entire row 24 highlighted as the active row. When I move to another cell I want the entire row highlighted automatically. Can it be done.
View Replies!
View Related
Reference To Active Row
I want to arrange a dataset in blocks of 8 lines and for this I need to refer to the actual row of the active cell. Below code does not work - the "Row" does not change as the active cell moves down through the rows
View Replies!
View Related
To Highlight Active Row And Column
I found this code to highlight the active row. I tried to make it highlight the row and column, but I was not successful. What I really need is to highlight the active row and column above and to the left of the active cell, not the entire row and column. For example, if G10 is active, the highlighted cells would be G1:G10 and A10:G10. Private Sub Worksheet_SelectionChange(ByVal Target As Excel. Range) Dim i As Long Cells.Interior.ColorIndex = xlColorIndexNone If Application. CountA(Target.EntireRow) 0 Then i = Target.Row Else For i = Me.UsedRange.Rows.Count To 1 Step -1 If Application.CountA(Me.Rows(i)) 0 Then i = i + 1 Exit For End If Next i End If Rows(i).Interior.ColorIndex = 6 End Sub Also, I have fill colors on the sheet and I just noticed that the code removes those fill colors. I need it to not remove my fill colors. The only fill colors it should remove are ones it previously colored.
View Replies!
View Related
Identifying The Active Row Number
I'm using a cells.find command to locate a value in a file. How do I return the current row number that I'm on following the command? I'm guessing it is something along the lines of: MyCurrentRow = ActiveCell.RowNumber but I know that that is an invalid statement.
View Replies!
View Related
Find Last Row In Non-active Workbook
I have a number of files which I am opening, manipulating and copying the result to a master workbook I am attempting to use code like this Selection.EntireRegion.Copy Destination:= Workbooks(Master). Range("A" & LastRow) Is it posible to define the value of LastRow without making Master the active workbook?
View Replies!
View Related
Change Color Of Active Row
I found Change Color Of Row When Cell Is Selected ("search" is my friend). StephenR's example is just the sort of thing I want, except I'd like it to ignore Cells that already have an Interior colour, or revert the Cells to their original Interior colour when you move on. The other issue I see would be how could you change/edit a Cells fill properties, without this routine changing it back to white when you move on?
View Replies!
View Related
Highlight A Selected Row
just bought a 22" wide screen monitor and when working in excel it's difficult to follow from left to right in a row i am looking at. i have 22 columns of info that are in view at any given time. the row number on the left gets highlighted and the cell i happen to be in is outlined with a double line border. is there a way to get the whole row outlined like the single cell? i know i can achieve this by clicking on the row itself, but i tend to move a lot around the spreadsheet via the arrow keys.
View Replies!
View Related
Deleting A Selected Row
I would like to run a macro that will delete the selected row in a protected worksheet but only delete it if the row does not have locked cells. I want users to be able to delete the rows they no longer need but only be able to delete them if the row does not have formulas that are locked. BTW-I am working in an older version of Excel.
View Replies!
View Related
How To Goto First Column Of Selected Row
i know the keyboard shortcut for doing this is End + arrow key... but wat if there are value in between for example Cat..""..""..""..""..""..""..""..5.."".."" hitting the End + arrow key from the very end will move selection to value 5... there are empty spaces in between.. 1. is there a way to convert the blank spaces in excel to 0 as default value. 2. is there any other keyboard shortcut key to reach to Cat without inturrupting 5 in between..
View Replies!
View Related
|
TRACKER
