I need to delete part of the row where one cell is selected. If more than 1 cell is selected, I want a msgbox. Example: I have any cell selected on row 26. I want to select all cells in this row including column C thru column AD. Column A & B are not to be deleted. After the selection is made, I want the row deleted and the below cells moved up.
View 3 RepliesCurrently working on a project for university and still learning how to use macro.
Got a problem which im sure is an easy solution for all you experts out there. As shown in the picture; http://img300.imageshack.us/img300/1205/macrohelp.jpg. When the Sap number is entered (from A19 and onwards), it copies the value to cell B10. The general code is used below.
I'm trying to get a code that will do the following: I've got a list of stocks followed by extra information in de columns to the right of it. If, based on that extra information you'd like to know more about the stock, I'd like the user to just select the cell that holds the name, and click a button.
What this button should do is the problem for me right now: it needs to select the cell left to the one selected holding the name of the stock.
The cell to the left holds the code that is used to lookup information in Bloomberg. This cell is invisible to the user since I hide it to make the tool look good. How do I write a piece of code to select for instance: B10-1=A10. The rest is just a recording job.
Also, I know you can add text to the text in a cell, however in this case I want to cut some text. Is the any way to get: "B10-1"-"equity sedol1", leaving me with the text in A10 minus equity sedol1?
I have a spreadsheet that has many shapes throughout and are connected together in a specific order. It is basically a drawing of steps and transitions in sequential order. I want to be able to select a group of cells that contain all the shapes that I want to select, run the macro and it select all the shapes within the selected cells. With all the shapes selected that I want, I can move and manipulate them as desired. The other option is to select each shape individually holding shift to make the group selection. The code that I am working with is as follows:
Sub SELECT_SHAPES_too()
Dim SH As Shape
Dim Rg As Range
Set Rg = Selection
For Each SH In Rg.Shapes
SH.Select Replace:=False
Next SH
End Sub
This is the idea that I want to do but I am having problems with the "for each shape in selection" portion.
The User has made multiple selections with the mouse. The spreadsheet is filtered. The user will usually make different multiple selections on the following columns: A and X through to AR (inclusive).
I just need some code to capture these various multiple selected ranges so that I can copy the selected range as shown below:
I have some selected cells in column A, they are not consecutive. I would like to copy these values and then copy the same area but from a different column...
The code I have here is only working when I have a consecutive selection.
Code:
Set rng = Selection
fr = rng.Cells(1, 1).Row
lr = rng(rng.Count).Row
rng.Copy
i have a multi select listbox that i want to be able to remove the selected items in one hit.
i have not been able to convert code for removing single selected items and could not find a working example.
this is probley the closest though cos its removing items it plays havoc with the listcount
I'm trying to make a simple program to allow me to total the amount of air filters I need to purchase for a given month. I am entering the amount of filters for each property and the frequency of replacement ie. monthly, quarterly, one month out of the year, etc. I would like to enter a month, ie. 2 for february and have the program list the quanty of each filter that I need to purchase for the given month. See sample attachment.
View 3 Replies View Relatedwrite a macro - Condition: When i select "Audit Round" = "Round 1" in B2 and press a button it will automatically copy data from B5:B8 and paste special value in C5:C8. Likewise if I select "Audit Round" = "Round 2" in B2 then it should lookup "Round 2" in "Row 4" and paste special values from B5:B8.
Here an example:
A
B
C
[Code]....
Arised from my earlier posting in Populate ComboBox With Specific Sheet Column Range. I have the following working code below, but am having trouble finding coding examples to select specific cells from the selected row (that was found by selecting a ComboBox value)and update TextBoxes with those individual values after the UserForm has been initialized (the bold "GREEN" comment in the code below). I have been able to find plenty of references to update TextBox values to Cells, but that doesn't do me much good in this application since the User needs to verify the old data in these cells before updating them using the UserForm TextBoxes.
I was toying around with several different variations of code (none of which worked properly), so I left it out for clarity of my working code. I'll post up this non-working code as needed, because I really wanted a fresh answer...not what I was trying to do. The attached file should be sufficient to see what's going on
Private Sub UserForm_Initialize()
With Sheets("SR Information")
.Range("A2", .Cells(Rows.Count, "A").End(xlUp)).Name = "MyRange"
End With
SRnumber.RowSource = "MyRange"
End Sub
Private Sub SRnumber_Change()
Dim ServiceRequestNumber As String
Dim c As Range
Dim rngG As Range
Sheets("SR Information").Select
With Selection
ServiceRequestNumber = SRnumber.Value
For Each c In Intersect(ActiveSheet.UsedRange, Columns("a"))
If c = ServiceRequestNumber Then..................
Basically it is a if statement saying that if the selected cell falls between 1/01/06 and 31/01/06 then Jan would be selected. The end part is not a problem; I’m just not sure how to write the one line of code that would test if the cell falls between the two dates. I attemped to create it as shown in the code attached below but wasn't successful. I used an else if statement to test the other 11 months.
Sub test()
Dim SelectDate As Range
Set SelectDate = Range("SelectedDate")
If selectedDate >= 1 / 1 / 2006 And selectedDate <= 31 / 1 / 2006 Then
ActiveSheet. PivotTables("PivotTable1").PivotFields("PnLDate").CurrentPage = _
"Jan"
ElseIf selectedDate >= 1 / 2 / 2006 And selectedDate <= 28 / 2 / 2006 Then
ActiveSheet.PivotTables("PivotTable1").PivotFields("PnLDate").CurrentPage = _
"Feb"........................
changing two variables a various amount of times and running the same procedure and copying the resutls into another sheet. Seems like a perfect place for a macro. However, these variables can be chosen from a list that the user wants. So why not build in a listbox for each one. Now I have two listboxes one for variable A and one for variable B.
The procedure in theory goes something like this we change variable A from the base case and then run the procedure for variable B, get the results, then run the scenario again but changing only variable B abnd repeat. Then once, all of the variable B scenarios are done, I want to change the variable A and then repeat and so forth.
That is the background and my main problem at this point, is that have these values in two listboxes, I know how to do the for each loops and such, however, I do not know how to do them for values in the listbox.
How do I identify the values selected in the respective listboxes and then pull them so I only use them for the for each loop?
I have the following code that allow me to select all of the cells with the color same as the active cell within a selected range:
Sub SelectCellColor()
Dim CellColorFormat As Long
Dim RangeString
[Code]....
I'd like to ask how can I fix the error so that there will not be a limit of the number of colored cells in a selected area?
i'm having a problem with a script I have (script is below). What i'm doing is running a script that displays files in a certain folder, those files are then displayed on sheet1 column O and are linked so when they are clicked upon, the file will open. I also have a combo box with a input range of $O$O. That puts the values in column O in the combo box. Now here is a problem and request.
Problem first, when I select the file names from the combo box, they don't open the file, all it does is display the file name in combo box and that's it. how to I get it to open up the file? Now for a request, I have another sheet that is almost exactly as the one i described above. The only thing different I want is when someone clicks on a file name from the combo box, instead of it automatically linking to the file, I want them to click on a button to display the file.
Sub HyperlinkXLSFiles()
ActiveSheet.Unprotect
Dim lCount As Long
Application. ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
On Error Resume Next
With Application.FileSearch
.NewSearch
'Change path to suit
.LookIn = "c:Sec"
.FileType = msoFileTypeExcelWorkbooks
' .Filename = " Book*.xls"..................
I have a listbox with 8 columns. Multiselect is enabled, and it must stay this way. As part of my program, after the user presses a command button, I need to use the row indexes of the selected rows in order to copy the selected information into an array which is then placed in a different listbox, and then delete the items from the original list. Pseudocode of what I want to do:
[Code] .....
But my understanding is that .ListIndex does not work this way with multiselect listboxes. I've tried searching for a solution for a while, but I cannot find one.
i'm writing a refrigeration selection user interface, working from values on an excel spreadsheet. how to get the programme to automatically select a value from a list or range once a user has selected corresponding value from a list within a combobox. for example if a user sets the temperature of their refrigerator to -5 celsius i need the programme to automatically select the corresponding value of enthalpy for the air at that temperature.
View 5 Replies View RelatedI want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies View RelatedI need to know if there’s a function (or method) in excel that’ll allow me to select an array of numbers and once those numbers are selected, to use only the numbers (for an averaging function) that yield the best sigma?
View 9 Replies View RelatedI have column A with various values in cells.
For instance, DG, GS, HG etc
I wanna do if a cell in column A is equal to DG then select the entire row that contains the cell. then call other sub.
When I use the mouse pointer to select a cell I can't use the arrow keys to move to another cell while the pointer is over the cell and I can't edit the cell while the pointer is over the cell. If I move the pointer away from the cell then I can move around and edit as normal therefore I don't think this is a scroll lock issue.
This issue also happens when I select a tab. If I select a tab and then leave the pointer over the tab I selected then I can't use the arrow keys to move around the worksheet or edit a cell; if I move the pointer away from the cell then I can move around and edit as normal.
I am using MS Excel 2010.
I am using this code to hide or unhide rows of text on another sheet:
VB:
Sub ProcessSheet1ChangeOnCellJ7(ByVal Target As Range)
Dim sAddress As String
Dim sValue As String
'Get the address of the cell that changed without '$' signs
sAddress = Target.Address(False, False)
[Code]....
When the "Not Pursuing" list box option is selected (in cell "J7" or "J8" in Sheet 1) I need to add (or over-write) "Not Pursuing" to the range of cells in column "B" (in the "Tasks" sheet), but only for that particular Goal, meaning a limited range of cells in column "B". If the "Pursuing - Show All Tasks" option is selected for a Goal then these same cells need to be blank so that the appropriate person can enter their name into the cell.
The purpose for adding "Not Pursuing" automatically to these yellow highlighted cells is that it will facilitate filtering of tasks by individual in the "Tasks" sheet..
Again I have tried several times to upload a sample file and am unable to, which I know makes it more difficult to solve. (Is there some common mistake people make? I know it's an allowed format and is very small in file size....)
Code solution can be entered directly beneath:
VB:
If Target.Value = "Not Pursuing" Then
ActiveWorkbook.Sheets("Tasks").Rows("29:29").EntireRow.Hidden = False
ActiveWorkbook.Sheets("Tasks").Rows("30:48").EntireRow.Hidden = True
I am trying to do is to make it so that users can enter data into my form (I have managed to create the form and am working on trying to figure out how to get the info entered into the form to appear in my worksheet) and then the data will cause the information to, basically, compile sentences that I want to appear in one of three cells at the bottom of the worksheet.
Essentially, at this point in time, the end goal is to make 3 cells that contain text. Eventually, this text will be indexed elsewhere, but that is for the next person to deal with. I am creating a prototype that I want to present as a process improvement.
So, when the user selects 3 in cell D7 I want the text "Customer purchased 3 Widgets at $20 each." to print in cell 82B.
I also want the user to be able to copy and paste some customer records from another program directly into a cell in the form that will just print (unchanged) into one of these boxes, too.
Lastly, I want the user to be able to select checkboxes that will, when selected, print a comment that will print in two of these boxes. For example, if the user selects yes for cell D26 then I want the text "Customer not eligible for free shipping" to appear in both cells C82 and D82.
I have big library books database file. now i want to re check all the book with physical stock and mark in excel file.
i have one more file with books barcode no.
now i want to mark multiple cell in sheet..
i am currently using the macro below to import text files into a spreadsheet. Currently, it begins the import in cell A1 which is what I recorded it to do. how do I change the code to begin the import on the active cell?
View 2 Replies View RelatedMacros question - The user enters a word, e.g. Malaysia in a particular cell (always the same location) and I want the macro to be able to find the next cell with that word in it, but it appears that when using macros you can't paste anything into the find function, so was just wondering what to do!
View 1 Replies View RelatedI am trying to restrict a cell so all that happens when clicked is an X to appear in that cell. I'm new to this so the simpler the better.
View 11 Replies View RelatedBasically I have a filtered list in colunms A to D. The user selects a cell in column A and I want to then be able to run a macro which copies that cell and the adjacent one in column B, into columns A and B on sheet2.
The complications are
Column B on the second sheet is merged with columns D to E so a straight forward cut and paste of A and B on sheet 1 into A and B on sheet 2 will not work in one cut and paste as it complains about merged cells. It would need to copy and paste A and then copy and paste B to avoid the error.
The row on sheet 2 where it is being pasted needs to be the first row between row 10 and row 30 where col A is blank (so it doesnt overwrite a previous copy and paste as they are basically creating a list on sheet 2 in those rows by runing this macro repeatedly). if there is no blank row then it should insert a new row at row 10 and paste into that
Sheet 1 is a table with the first column and first row as text (table headings). The first column is names and first row is from report names.Namereport 1report 2Jane Doe114John Doe52
Sheet 2 is the report1, for example purposes
NameJane DoeJane DoeJane DoeJane DoeJane DoeJane DoeJane DoeJane DoeJane DoeJane DoeJane DoeJohn DoeJohn DoeJohn DoeJohn DoeJohn Doe
I am trying to have it to so that when you double click on cell B2 of sheet1, it will go to sheet2 and autofilter on the value to the left of B2 on sheet1 "Jane Doe"
This is what I have so far but when I double click on B2 it just moves the cursor to the cell to the left instead of filtering on the value of the cell to the left on sheet2.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim id As String
If IsEmpty(ActiveCell) = False Then
ActiveCell.Offset(0, -1).Select
Else
id = CStr(Selection)
Sheet2.Activate
Sheet2.Range("A1:A500").AutoFilter Field:=1, Criteria1:=IsEmpty(ActiveCell) = False And ActiveCell.Offset(0, -1).Value.id
End If
End Sub
How would I get a particular cell to display the contents of any cell that might be selected.
ie, if I click on A1 I want A2 to display the info thats in A1, and if after that, I click on E12, I want A2 to then show E12's info, etc etc.
to find event that is triggered when cell is selected.
Or maybe there is a better way to do this?
This is what i want:
When user clicks given cell form will pop up letting user choose cell value from Combo box.
I wanted to use Cell Selected event and just pop up Form but maybe i can do it withought VB.
Is there a way to limit possible cell values to few predefined values?
So user cant put there whatever he/she wants?