I will have to insert the below table in the worksheet area whereever I am working. Batch No.Doc. No.DateRemarks22-May-12
Fox example I require the "Batch No." in the ActiveCell and "Doc No." in the same row next column, "Date" in the same row and next column and "Remarks" in the same row next column. I also require the Today's date below the "Date", by using =Today() function of excel.
I will have to repeat the above table over 100's of times.
In one column (Column A) I have a column of data which contains long descriptive text - i want to extract a specific piece of text from this descriptive text and enter it into the next Column (Column B).
E.g. Cell A1 = "Hello Buddy, how are you?" - i want to extract the word Buddy and enter it into cell B1
then A2 into B2, A3 into B3, etc, etc,...
Is there a simple macro out there that can do this?
I really DO have a problem. I need excel to create me a list of whenever someone enters their name. Now, this may sound simple, but, the text in the list CANNOT be allowed to be overwritten.Also the text needs to be entered into the NEXT empty cell between C30 and C50. This is basically so I can keep a record of whenever anybody does anything/modifies the cells that include text between S7 andS21
So basically if text is ever entered into S7 all the way down to S21, I need an automatic copy created into the next available cell between C30 and 390. It is also ok if there are duplicates values(names).
I would give a print screen, but I don't know where the attach button is on this forum.
I have worksheet that contain values in column E and G and the total in column K. E and G are unlocked for manual input and column K contains the formula for the total and is locked. From time to time a certain row will not be applicable and before I started locking the cells in column K i would just put "not applicable". Now that it's lock I can't do that. My only option now is to put O in column E and G but I would rather put "not applicable" in column K. Is there a way around this. I was thinking of something along the line of a macro that would unlock the worksheet input the text and re lock it. The macro would have to lunch when a locked cell is selected or have a button that would launch the macro an would prompt for which cell the text would be entered. Is this possible.
View 7 Replies View RelatedI am caught in an areas where I have learned how to find the next available empty row by going far down my worksheet, counting up until I reach a filled row and then offsetting that value by 1 as seen here below:
NextRow = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
My difficulty lies in assigning the cells in this empty row the data a user can input in my text boxes; let's say there are 4 text boxes which need to be put into the following cells:
Text box 1 (Text value) needs to be assigned next empy cell in column: AText box 2 (Text value) needs to be assigned next empy cell in column: B (1 offset away from A)Text box 3 (Numeric value) needs to be assigned next empy cell in column: F (5 offsets away from A)Text box 4 (Numeric value) needs to be assigned next empy cell in column: H (7 offsets away from A).
How would I go about using my identified "NextRow" and then plug in these text box values into their appropriate cells down that row?
I'm trying to make a schedule for some of my employees (300 to be exact) and I was trying to work out a way of speeding things up a bit. I've made plenty of pretty complex equations for working with the task but the solution for what I would like to do now alludes me.
Here's the challenge: I have a sheet where I would like to insert employees within row 4 and then have their shifts shown visually in the column below that, and have the hours they work put into a merged cell (or something similar), like what can be seen in the blue cell under "Employee 1" (C6). What I would like to do is just have something like a VBA detect that a series of cells is merged (red cells) and insert the corresponding time, located within B5:B33, into that cell (with same format as the blue cell). Also, above the employee's name I could put a button to run something like a macro to run the program for the corresponding employee directly under that button.
Essentially I want to merge a series of cells, hit a button, and have excel locate and input the correct times within that merged cell.
I have a macro that is woking that is activated either via Ctrl-p or by an icon in my quick links.
I would like to call the macro when I enter text in the input cell C7.
At the moment I enter text in C7 and then call the macro to perform a series of tasks.
I would like to make the macro and tasks perform when I enter the text in C7 and hit return or enter key.
Is this possible??????
i have a workbook that is doing a copy and paste between 2 workbooks.
the trouble i am having is every month workbook a changes to be the name of the current month and year workbook b never changes. so when a change in month happens the macro stops working due to new workbook name.
how could i have the macro reed the name of the work book and input that name into the necessary locations withing the macro.
i want a macro that will start on D25 and enter a 1 for five rows up to D29
than change and enter a 2 starting on d30 and enter a 2 for five rows
up to D34 than change an enter a 3 up to D39 ....... on and on up D225.
I have a concatenated value in a column D (from three colums A, B and C). Whenever a user enters data in colums A, B and C, I would like to get a sorted list of values from column D to be populated in column E. I use the sorted values in Column E for a dropdown list in another worksheet. Could somebody help me with the macro code?
View 9 Replies View RelatedI have an excel sheet which has a macro which captures the current time in a cell with the formula =now(). What I am looking for is that once a user runs a macro and the time is inserted into that cell then that cell should be locked and cannot be changed then. If this can be done by any formula / function or VBA.
View 2 Replies View RelatedThis is what I'm trying to do:
1. When a user clicks on a Drop down box and selects "Add New", I would like a Macro to run
2. I want this Macro to open up a Dialog/Text box to say "Enter New Information" where the user can enter in some text
3. The text that is entered by the user into this box will be added as a new entry into the Drop down box selection
My VBA knowledge is still at a beginner's level and I know how to get a Macro to run based on a cell value. However I don't know how to create a Macro for the dialog box nor do I know how to create a Macro for updating the drop-down items.
I need a cell to read $0.00 always even if the cell is deleted. so if blank = $0.00.
Here is what I thought would work but doesn't.
Sub Worksheet_Change(ByVal Target As Range)
Range("b5").Value = 0
End Sub
Has anyone come accross any smart and time saving alternatives to enter =NA() in any empty cells.
View 9 Replies View RelatedI am my excel worksheet (excel 2010) I have one cell that changes every day (number). I want this number to open my htm document and replace the same number in a string in the htm and save/close this.
An example:
My htm document is located at C:/ and named XX.htm
The number I want from excel is in cell A1 in sheet1, and the worksheet is located in D:/ named yy.xlsx
And the text(number) I want to replace is in the following string in the htm document, in this string it is 72, next day it can be 30:
src="Bilder/72.png"
Programming Excel VBA Macro to do OCR (text recognition) from a prt scr screen capture image and input the text into cells. Currently my Excel file has a push-button, and upon clicking on it the macro pastes into Excel the current clipboard image I have created by pressing prt scr while in another program. The macro then crops the image to the region with the applicable text. I have to then manually type the text I see in image format into the appropriate cells.
the VBA coding to automate this? I'd like it to use the clipboard image and run it through OneNote OCR, after which the applicable text values are automatically entered into the cells. Ideally the code will first crop to the region with the desired text before it does OCR. If this is not feasible, it will need to incorporate a method (keyword search?) to hone in on the desired text after the entire prt scr image has been OCRed.
I want to create 3 command buttons (active X) on a worksheet to toggle between showing rows which only contain the below text in column L (range L9:L30) and showing all rows containg the options (However, I also have some blank rows in this range and i always want them to remain hidden.)
My text options are:
High ¨‚
Medium ՠҪ
Low ’į
The text arrives in the cells via a VLOOKUP
Is the chinese text a problem? i can't type it into VB.
I've been using the following macro to hide and unhide rows with a command button in the same sheet:
Private Sub CommandButton1_Click()
Toggle_Hide_Unhide
End Sub
Sub Toggle_Hide_Unhide()
Dim rngCell As Range
Dim TakeAction As Boolean
If ActiveSheet.CommandButton1.Caption = "Hide" Then
TakeAction = True
ActiveSheet.CommandButton1.Caption = "UnHide"
Else
TakeAction = False
ActiveSheet.CommandButton1.Caption = "Hide"
End If
For Each rngCell In ActiveSheet.Range("I9:I30")
With rngCell
If .Value = 2 Then .EntireRow.Hidden = TakeAction
End With
Next rngCell
End Sub
In some of my formulas, I need to re-enter the contents of the cell in order for a formula to compute.
For example, I am doing some math on a cell whose original contents are "10:21:00 AM" The formula returns a #NUM!. If I retype 10:21 in the cell and hit enter, the formula will now calculate properly. I have reformatted the entire column several times so that it is a custom hh:mm format. The original content also shows as time so I don't think that it is a formatting issue.
My worksheet has about 20,000 rows and this only happens for about 100 of the rows. It is pretty time consuming to manually go fix each one. Any ideas what is going on here?
I'm trying to get a formula that will enter a particular value when 2 specific criteria are met. I've been trying to use an =IF(AND( statement, but so far I keep getting a "the formula you typed contains an error" message.
I need to have cell V9 return a value of 8 if the following conditions are met:
Cell D9 = "SG"
Cell H8 of a different workbook (Called Work Schedule) = 3
I would like the value of V9 to change to 12 if:
Cell D9 = "SG"
Cell H8 of 'Work Schedule' = 19
My formula now looks like this:
=IF(AND(D9="SG",'WORK SCHEDULE'!H8=3,8,IF(AND(D9="SG",'WORK SCHEDULE'!H8=19,12,""))))
If I use format cells and choose time... do I have to enter the time in decimals to get it to show up like 1:30 PM? Or is there a way for me to type something quicker like 130 p?
View 9 Replies View RelatedI need to get a code that will just read the text in a cell that contains text and numbers example abc123 I want it to only read the abc as the numbers can change and cant write them all into my macro all the time.
View 9 Replies View RelatedI'm trying to copy about 10,000 barcode over to a new spreadsheet, the prob is that when I copy them over they appear as XXXX+12 and then when I try and use them it doesn't like it. I can solve it if I format the column to text - and then double click it. This is ok for a hundred or so but fingers start to hurt after that!
View 14 Replies View RelatedI would like to be able to choose a month (from a drop down menu), then choose who the payment will go to ie. creditor (from a drop down menu) ie. car, truck, cc payment, as a result of those selections, then enter the amount of the payment, and finally the ending balance will appear. I have the drop down menus in place and I have all the balance calculations in place. I could use the spreadsheet that I have but I only want to see the below info. Plus I don't know how to link or lookup this data to the stuff I've already created.
Select Month:
Select Creditor:
Enter Payment:
New Balance:
I have already set the sheet up calculating the balances after a payment has been made. I know how to hide all the formulas, but I don't know how to get it to so that you choose a month, then creditor type (from drop down menus), and payment so that you see a new balance. I only want to be able to link or lookup the month, creditor together so that a payment can be made to that cell that I've already established. As a result, then that cell can be shown in the new balance.
I'm building a database which I intend to upload to an ecommerce website. I am retrieving information on some of our products from the manufacturer's website. The information appears on the manufacturer's website as follows:
Part No : DP9970
* Description : Disc Pads
* Manufacturer : Trupart
* Unit Of Sale : Boxed Set
* Width (mm): 130
* Height (mm): 62
* Thickness (mm): 19
* Note: 4 pads with top clip
When I copy and paste this info into excel, it gives each individual line of information a separate cell. I need the information to appear in one cell in order for it to display properly on my website.
I need to find a way to enter times into excel without having to use a colon.
The data I need in the cell is the hour, the minute, and either AM or PM. No seconds, which I believe is why Chip Pearson’s time VBA procedure doesn’t work for me, and I don’t know enough about VBA to change it for my needs.
So for example, I need to enter in times like 10:09 PM or 12:40 AM or 2:33 AM.
All my times will be entered into Column D.
I have done a ton of searching and tried several different solutions, but none of them allow me to put in AM or PM. If I just put 1009 into a cell with Chip Pearson’s macro, it will display as 10:09 AM, which is great if I need it to be AM. But if I need it to be PM, and I enter in “1009 p”, it will display as “1009 p”, neglecting the colon and not displaying the time correctly.
Does anyone have a solution where I can type in a 3 or 4 digit number (233 or 1240) and either “a” or “p” after it, and have it display as 2:33 PM or 12:40 AM?
I use Excel 2007, if it matters.
In simplicity: We want to be able to enter a value in cell A1 (and hit enter), but we want the value in A1 to be increased by the value saved in H1.
So: if H1 had 250 saved in it, if we enter 150 in A1 (and hit enter), we want the value in A1 to become 400.
I work in a fruit and veg business and they are using parchment and quill still, well it certainly feels that way. I have been asked by customers to provide an online order form which i will email to them and they can fill in and email back, i scanned an invoice and used OCR to upload it to excel and it has come out quite well.
Basically there are three columns of product lines and then directly to the right of each product is a column i have entitled Box & KG respectively, if the customer types a number into the box column i want it to automatically add 'Bx' to the end so this if they typed 5 in a cell in the box column it would look like this '5 Bx' (obviously without the quotes), and the same for the KG column but it would denote 5 KG instead, also i would want it to add in the space as well after the value.
I have a column of values, and I want a column next to it that shows the value in every second cell in the first column, but right underneath. See below for an example of what I am trying to achieve. The actual column is 17000 cells so I cant do it manually.
12
24
36
48
510
612
7
8
9
10
I have a list of number I want VBA to add to a sheet. right now i have a VBA to add it one by one but was wondering if there was an easier way.
EX.Range("A1").Select
ActiveCell.FormulaR1C1 = "78"
Range("A2").Select
ActiveCell.FormulaR1C1 = "275"
Range("A3").Select
ActiveCell.FormulaR1C1 = "280"
Range("A4").Select
ActiveCell.FormulaR1C1 = "765"
I am a beginner in VBA programming and I have to make a Userform for entering data in the specific places(in a table) in the worksheet. But when I enter a number, it changes all the cells to that number. I can't find my error.
View 7 Replies View Related