Entering Text Box Data Into Next Empty Cells

Mar 1, 2014

I am caught in an areas where I have learned how to find the next available empty row by going far down my worksheet, counting up until I reach a filled row and then offsetting that value by 1 as seen here below:

NextRow = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row

My difficulty lies in assigning the cells in this empty row the data a user can input in my text boxes; let's say there are 4 text boxes which need to be put into the following cells:

Text box 1 (Text value) needs to be assigned next empy cell in column: AText box 2 (Text value) needs to be assigned next empy cell in column: B (1 offset away from A)Text box 3 (Numeric value) needs to be assigned next empy cell in column: F (5 offsets away from A)Text box 4 (Numeric value) needs to be assigned next empy cell in column: H (7 offsets away from A).

How would I go about using my identified "NextRow" and then plug in these text box values into their appropriate cells down that row?

View 6 Replies


ADVERTISEMENT

Make Formula Cells Empty Rather Than Empty Text

Apr 17, 2008

Is it possible to make a cell "really" blank/empty based on an If statement? For instance:

=if(a1>10,a1,"")

Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.

So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.

Is there any way to tell Excel to make the cells truly empty?

View 3 Replies View Related

Entering Data Into Cells

Aug 19, 2009

I'm building a database which I intend to upload to an ecommerce website. I am retrieving information on some of our products from the manufacturer's website. The information appears on the manufacturer's website as follows:

Part No : DP9970

* Description : Disc Pads
* Manufacturer : Trupart
* Unit Of Sale : Boxed Set
* Width (mm): 130
* Height (mm): 62
* Thickness (mm): 19
* Note: 4 pads with top clip

When I copy and paste this info into excel, it gives each individual line of information a separate cell. I need the information to appear in one cell in order for it to display properly on my website.

View 4 Replies View Related

Mark Cells For Entering Data

Oct 4, 2007

Can I add something to a cell and have it so it does not print?

I need to mark certian cells to have data filled in, in those cells. However if data is not put in those cells I need them to be blank when printed.

Example:
I can put text in B7:
Enter Name Here

Then the user knows to put the name in that spot. If there is no name to be entered then I want to be sure that is not printed when I print the list.

Is any of this a possibility without putting 33 different labels on the page, which is one way. Or 33 different comments on the page, another way.

View 9 Replies View Related

Formula Is Entering A Default Time When It Comes Across An Empty Cell

Nov 9, 2005

I'm using a formula to copy a time from one cell to another
across sheets. The format of the time is h:mm AM/PM.

However, when the formula references an empty cell, it puts in a
default value of 12:00 AM and I need it to remain blank, (just as
the referenced cell)
It's such a simple copy formula. ie:

=sheet1!A1

e-mail... howard<dot}coakleyatcoakley<dot].codotuk
Skype ID: howie10 (get skype from www.skype.com)

View 10 Replies View Related

Pulling Data From Previous Cells When Entering Repeated Name

Oct 12, 2012

Margo
12/12/86
188478007
7/19/12
801
Anthem BC/BS

Margo
12/12/86
188478007
7/31/12
806
Anthem BC/BS

[Code] .......

I have this info on my excel spreadsheet plus 500 more lines. What I am looking for is if a name repeats then the info in column 2, 3, 5 and 6 for that name needs to be brought to new row. Example would be if I used the name karen on the next row then I would like her info from the desired cells to auto populate so I don't have to keep entering them and so on with new and old names. I have been trying to get this done for months know and have had no luck. My sheet already has over 500 lines of names and it would be nice if I could use the data from the past as well as the future to populate these cells.

View 5 Replies View Related

Excel 2010 :: Autofill Entering Data Against Blank Cells

Jan 23, 2014

In earlier versions if I used the double clicked the autofill handle it would only fill down to the next adjacent cell containing data. Now it fills down to the bottom of all the data regardless of whether there is a blank cell or not e.g

X X X Z
X X X Z
X X X Z
X X
X X X

Now this happens

X X X Z
X X X Z
X X X Z
X X ...Z
X X X Z

How can I stop this as I need to enter different data in the next section?

View 1 Replies View Related

Color Cells Based On Adjacent Cells Being Empty & Add Text

Apr 2, 2008

I’m trying to make my life a bit easier, by adding a few macros and formulas to the spreadsheet (Everything was done completely manually before I got here!!!).
What I would like to do is take two columns, which contain a start and end time for work shifts, and colour them GREEN once I have entered a name in the Worker column (Along side the two with the time), and also to fill a cell with a Yes or a No. I’m aware of auto conditioning, and I’ve tried to have a play to get this to work, but I just can’t work it out.
I have posted a link to an image which shows what I want. I hope I've explained it well enough!

http://img530.imageshack.us/img530/6239/excelspfk0.jpg

View 9 Replies View Related

Comparing Text If Some Cells Can Be Empty

Aug 13, 2009

I need to compare some cells, but sometimes one or two cells can be empty (but sometimes none of them)

e.g. A1 = January
B1 =
C1 = January
D1 = January
E1 =

and I need to compare this cells A1:E1 and if text in not empty cells is the same then write TRUE to F1 and if not write FALSE.

View 6 Replies View Related

Copying Text To Empty Cells

Sep 17, 2009

I currently have created a form for the user to fill in details on my sheet. My idea is that when the user clicks a button, the macro will take that piece of text and populate my other sheet into the correct column. Therefore the task I am trying to resolve is copy the text into a field and then if the user clicks copy again, the text will fill into the field below as it is empty and so forth until the user has finished entering values. I have the following setps in pseudocode below but having trouble converting it to a macro!

View 2 Replies View Related

Sum Time Cells In Range With Empty Text

Apr 4, 2008

trying to add cells together that contain time (hours and minutes). The cell containing the total formula shows the #VALUE! result when and only when one or more cells being added do not have a value in them.

The times have been entered as actual times of the day, formatted for AM/PM.

A simple adding formula works fine, but all cells must have a value in them to obtain a valid result.

I attach a sample of the sheet.

View 3 Replies View Related

Auto-Populating Empty Cells With Specific Text?

Dec 13, 2011

Is there a way to auto-populate all of the empty cells with the word "Need to Review" in a cell range (A1:A250)? Once any of the cells in this range is populated, whatever is inputted should house the cell.

View 9 Replies View Related

Sort Blank Cells (Empty Text) To Bottom

Aug 7, 2008

When choosing ascending or decending, is it possible to always keep rows with the designated blank cells at the bottom? Trying to prevent the blank cells from popping on the top when i filter by a certain field.

View 4 Replies View Related

Data Validation (text & Empty)

Jan 27, 2008

I am having two problems ....

1) I have a field for which the user MUST enter text information. It can't be left empty. I set validation on the cell ... Text Length must be greater than 0. It still allows the user to hit enter without entering information without an error message and a retry.

2) In another field, the user has the option to enter (text) info or not. It can be left blank. The value in this cell, empty or other, is copied to another cell in another worksheet. The problem is ... the destination cell gets a value of 0 when the user field is left blank. The value of 0 in the destination cell can't be there ... I need that cell empty.

View 9 Replies View Related

Move Text Data To Next Empty Row In Column

Mar 15, 2007

I am importing a 20 character text string (from a barcode scanner) to H2. I need to send that data to the next unused row in Column A (after insuring that no matching text currently exists in Column A-no action taken if matching data is found). I can provide a copy of the sheet, along with a description of the project.

View 2 Replies View Related

Hide/Filter Rows Containing Formulas, But No Data. Empty Text

May 8, 2008

I am developing a spreadsheet that, once all the code is run has numerous sheets added. On these sheets I have a significant number of rows that contain no data and could be hidden (I dont want to remove them, because later I need to re- import all these rows back to my master sheet). I tried code I found in the forum to hide a row if it is empty but this doesnt work as some of the cells contain formulaes referencing back to another sheet that is hidden.

I am trying, and failing, to write code to hide a row that contains no actual data, but still has formulas in some of the cells.

View 4 Replies View Related

Delete Empty Cells With No Data

Mar 27, 2008

I have a worksheet with data in column A. However, there will always be blank cells throughout this column. I am looking for code that will delete the blank cells (so to speak) and move the below cell with data up one or however many blank cells precede it, hence deleted the blank cell. End result, column A will have no empty cells. The data contained within the cells will be both numerical and text.

View 3 Replies View Related

Entering Text Automatically

May 4, 2009

I really DO have a problem. I need excel to create me a list of whenever someone enters their name. Now, this may sound simple, but, the text in the list CANNOT be allowed to be overwritten.Also the text needs to be entered into the NEXT empty cell between C30 and C50. This is basically so I can keep a record of whenever anybody does anything/modifies the cells that include text between S7 andS21

So basically if text is ever entered into S7 all the way down to S21, I need an automatic copy created into the next available cell between C30 and 390. It is also ok if there are duplicates values(names).

I would give a print screen, but I don't know where the attach button is on this forum.

View 11 Replies View Related

Entering Text Using Macro?

May 23, 2012

I will have to insert the below table in the worksheet area whereever I am working. Batch No.Doc. No.DateRemarks22-May-12

Fox example I require the "Batch No." in the ActiveCell and "Doc No." in the same row next column, "Date" in the same row and next column and "Remarks" in the same row next column. I also require the Today's date below the "Date", by using =Today() function of excel.

I will have to repeat the above table over 100's of times.

View 2 Replies View Related

Moving Cells Data Down 1 Cell If That 1 Is Empty

Apr 29, 2014

I have a Rental Form that i'm working on, and to tidy things up when I print it out, I would like to move a cells data down 1 row if that cell is empty. Here's what I have:

cell b8 - First and Last Name
cell b9 - Address1
cell B10 - Address2
cell b11 - City, State, Zip
cell 12 - Phone #
etc.

Not too many people have an address2, so when that field is empty, I'd like to move Address1's data down to it's position (address2). If address2 has data in it, leave address1 where it is. Simple right? This moving would happen when the command button is hit and the form data goes to sheet 1 which works fine.

View 10 Replies View Related

Filling Empty Cells With The Right Data From Another Sheet

Jun 26, 2009

I got my invoice and my journal. Once I finish my invoices I send all to the journal, but I am having a little problem.... Here is my code

View 2 Replies View Related

Macro Selecting Data In A Row With Empty Cells

Jul 9, 2013

I have to select and cut a column with on several lines empty cells. I use the following code

'Range("c2", Range("c2").End(xlDown)).Cut' but this code select only the data till the first empty cell.

How can I select the whole column till the last cell. The column B is filled with data on every row so I think that I have to use the offset code.

View 2 Replies View Related

Filling Empty Cell Value Based On If Else Condition And Delete Row More Than 2 Cells Empty

May 23, 2014

Here find the excel file

My requirement

1) 4 values contains in each row based on the values from those cells the max value will display.

2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.

3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.

View 1 Replies View Related

Find Empty Cell In Column And Apply Required Character To Empty Visible Cells?

May 8, 2014

I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.

I am using code similar to the below:

[Code] .....

View 5 Replies View Related

Returning The Contents Of A Non-empty Cell In A Range Of Empty Cells

Jan 8, 2008

I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?

I would do this with a series of nested IF statements if there weren't more than 30 of them!

View 9 Replies View Related

Entering Text In A Locked Cell

May 29, 2014

I have worksheet that contain values in column E and G and the total in column K. E and G are unlocked for manual input and column K contains the formula for the total and is locked. From time to time a certain row will not be applicable and before I started locking the cells in column K i would just put "not applicable". Now that it's lock I can't do that. My only option now is to put O in column E and G but I would rather put "not applicable" in column K. Is there a way around this. I was thinking of something along the line of a macro that would unlock the worksheet input the text and re lock it. The macro would have to lunch when a locked cell is selected or have a button that would launch the macro an would prompt for which cell the text would be entered. Is this possible.

View 7 Replies View Related

Rotate Data Excluding Empty Cells Using Macro

Jan 16, 2012

First I will post the data:

Weekly Roster

F98AKHTAR99DEEPAK100NAPA'A101OUKASH102ROBINSON103RUSSELL104SALUNI105S
PARTIATIS106SPICE107TAN108TORRES. Jr109VAN STEEN110ACCIARITO111112113114115116117118119120

In this data, as you can see there are a lot of cells/rows that are empty. I have a macro that will copy the cells F98:F120 to F99:F121 and then copy F121 to F98, and finally delete the value from F121. In this case, it will give me a blank cell at the top and the data hasn't rotated really. All the names will be in same position.

But I DON'T want that. I want the macro to look for the last cell/row with a valid value in it and rotate the cells so that I end up having ACCIARITO at the top and everybody else to move down one row.

View 6 Replies View Related

Find Small Amount Of Data Amongst Lot Of Empty Cells?

Jul 1, 2013

One of my datasheets by necessity ends up as about 25,000 rows long, but only about 40 of those rows have data in. The rest of the rows are empty.

If a row has data in, there will be data in every column on that row, for example if row 2 was not empty, there would be data in A, B, C . . . and all the way to the last column without missing cells along the row.

I need to copy those 40 rows without blank rows in between. At the moment, I have a macro that deletes blank rows, but it takes hours to run.

This is the code that's being used at the moment:

Sub DeleteBlankARows()
Dim r As Long
For r = Cells(Rows.Count, 1).End(xlUp).Row To 1 Step -1
If Cells(r, 1) = "" Then Rows(r).Delete
Next r
End Sub

View 4 Replies View Related

Nested IF AND Formula: If Cells K8 And L8 And R8 Are Empty, Then No Data Should Show

Dec 31, 2006

i am having trouble putting together an IF Formula together with and/or. i need to do the following

if cells k8 and l8 and r8 are empty, then no data should show.
if cells k8 and l8 and r8 is zero, then show zero.
otherwise add all three cells.
i thought i should use if(and... that is all 3 cells must be empty or zero.

=IF(OR(ISBLANK(K8),ISBLANK(L8),ISBLANK(R8)), "no data", IF(OR(K8=0, L8=0, R8=0),"ZERO", K8+L8+R8))

i have tried if(and) and if(or) and no matter what i have tried it doesnt work

View 4 Replies View Related

Lookup Non-Empty Cells / Ignore Empty Cells?

Aug 31, 2013

How I can look up non empty cells as shown in the below tables by use of a formula (I guess shifting data to the left without any empty cells between the data)?

Data as shown in present worksheet.

A
B
C
D

[Code]....

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved