In column A I have 10,000 road names with many duplicates. In column B I have the duplicate roads removed with only one left (about 1400). In column C I have a map code for that road, married to column B. Question; how do I get the map code to post to all the equaled roads in column A?
View 4 Replies
I'm using excel to keep track of information at work and have formulas set to figure out totals weekly. The problem comes about when I sum up each column, why doesn't the column totals use the same formula as the top.
Example would be
2 X 5 = 10
3 X 8 = 24
4 X 5 = 20
6 X 5 = 30
15 23 84 sum total of all columns
15 X 23 = 345 why do I come up with 345 instead of 84 when using the same formula as above
If the user clicks on a cell within a specified range ("DataEntryWindow") which contains formulas, I want the formula RESULT to be copied on to the formula bar for that cell (not in to a cell) - the user can then press enter to replace the formula with the result, or escape to cancel
- you can do this manually by copying the cell as values to another cell, then copying that value to the clipboard letter by letter, then clicking on the original, clicking F2, selecting all the formula text, then pasting the clipboard!
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Target, Range("DataEntryWindow")) Is Nothing Then
curval = Target.Value
Application.SendKeys "{F2}"
'Application.SendKeys "???" ' some keyboard combination to go left, left, left
Application.SendKeys curval
End If
End Sub
Needless to say, it doesn't work. sendkeys seems to do nothing at all. is there an object in worksheet for the formula bar that i can paste to?
I need to write a pattern for a postcode. I have the below (very basic I know and loses lots of combinations but i'll deal with that later) but no matter what I enter in the box I get mt error message saying the input in incorrect....
View 9 Replies View RelatedI have a list of addresses, which are comma separated, all ending with a PostCode
How Can i strip out the PostCode field?
In my spreadsheet, I have a column for credit card totals (G) and cash totals (J)
I am adding the amounts for Food (Column B), Liquor (Column C), Wine (Column D), Beer (Column E), and Taxes ( Column F) for a total in Column G.
However, Column G is only for credit card totals and I want to do the same calculations for cash totals (Column J) using the same B through F Column without those numbers being plugged back into Column G, when I have no credit card total.
I have produced a basic search/lookup facility on an Excel workbook that simply allows the user to enter a post code and some details will be returned using a vlookup. The document is going to be rolled out to a number of operational users so I want to basically 'lock down' everything I can in the document (basically everything except the data entry cell) and make it fool proof- I have locked all cells apart from the data entry cell and have made the file read only.
The only issue I am encountering is when the cursor is in the one 'unlocked' cell (i.e. the one the users will enter the post code into); it appears that you can break the document. For example, when the cursor is in the 'unlocked' cell, I am able to go to Tools > Options and change various settings including cosmetic colour changes but also cell calculation which breaks the lookup functionality. This is probably enabled as the cell is unlocked, but if I lock the cell, when I protect the document, it disables data entry!
if there is another way of providing this one cell for users to input data into for the vlookup to work whilst locking down the rest of the document to ensure that no-one can break it?
I have an excel calculator that I use daily (mostly written in VBA). I change some of the values to get a new result. Is it possible to post the values of the results in a column so that I can see what the old values are? For security reasons I cannot disclose the calculator but I guess I can post an example of how I would like it to work.
View 3 Replies View RelatedI have been able to produce a column that gives me key date information. I might have many empty cells in that column before it hits another date. I need to get this data over to another sheet and place it in a row.
I am trying to get it to look like this:
B2(value), C2(value),D2(blank),E2(Value),F2(Value),G2(blank) etc depending on how many more elements are found in the sheet.
I am able to find topics that allow me to copy a range of data but not one that will allow me to copy a range then skip a cell.
I have attached link to a resource planner I have cobbled together and am stuck on the last piece of code. The "Assign Project" button needs to take the project and resource from the drop-down lists and populate the column of that resource with the project name between the dates that have been selected.
Resource Planner: [URL] ....
I'm using Excel 2010 and Windows 7
with a simple code that could:
If column K2:k466 is blank or says "No" then columns L & M are hidden. If it says "Yes" it is not hidden.
Also,
If Column N2:N466 is blank or says "No" then Columns O,P,Q,R are hidden. If it says "Yes" they are not hidden.
Finally,
If Column V2:V466 has a zip code (or number) then columns T,U,W,X,Y,Z,AA,AB,AC are present. If there is no value in any of V2:V466 then they are hidden. .
I would like to amend my macro w/ additional code that will allow me to view the value in column A, if a subject is chosen from list from columns D or E. Choosing a singal subject to view from row2,from column,D or E will cause the value in column A to not be seen if the subject does not correspond with the row the value is located. Is there a way to match values from corresponding/matching column values with the rows with values in columnA? And. allow if match found to display/list the value in the first empty cell in column A for match? I would also like the macro to reverse match for column A.
So if a single value is selected in column A for view, then all rows for which the value pertains to will also be shown, instead of just the single row with the value.
Here's an examplary make of the booklet.
I have a simple formula which subtracts one cell from another. I then have an if and statement which checks if that cell is equal to zero. If so, continue processing.
The problem is that the formula always reads the cell as not equal to zero although the result of the formula contained in the cell does result in zero.
I have a countif formula that calculates the number of entries between 2 dates. However i now need to also count how many of these match a 3rd value.
So i will need to work out how many "are greater than or equal to B2" "less than or equal to C2" and "equalling D2"
what i have already
=(-COUNT('Current Work'!AE8:AE2000)+COUNTIF('Current Work'!AE8:AE2000,">="&B2)+COUNTIF('Current Work'!AE8:AE2000,"<="&C2))
I have some numbers around 200 numbers which are not same digits i.e. if 1st number is 7 digits, 2nd number is of 10 digits.
Like this even if i have a number of 1 or 2 digits then all number should have equal digits i.e. in 200 numbers if one numbers is of 13 digits then all the numbers should be 13 digits.
To do this first i am doing this to the right align & comparison all numbers & taking the highest digit number & pre-fixing the other numbers with zeros’ so that all number are equal in number of digits. This is taking huge time.
I want to make a macro or any easy method so that all should have equal no of digits.
I want that if 200 numbers are pasted in the column E i.e. from E2 to E201 then all should be converted to equal digits number by prefixing zeros & should appear in column G from G2 to G201.
And after converting them it should be prefixed with D/ OR D/ABC:
This will be present in B2 cell i.e. this cell will be blank always. And once I have any thing in that cell that should be prefixed to the converted numbers in the column G & they should appear in Column I.
And again the numbers in column G should be prefixed with the content in B2 & should appear in column K in the Ascending order sorted.
Suppose if , I have 500 numbers then they should be converted automatically to equal digits & appear in Column G & prefixed with the contented in cell B2 should appear in Column I & sorted series in ascending order with prefixed with cell B2 in the column K.
And if I have 15 numbers only then it should do the same job easily. Here the numbers of numbers are not defined.
All this should be get done on click of the command button.
Conditional Formating Text equaling to Number formats:
Example:
C20 is '436.59 (its pasted as text often is must remain as text) and D20 is 436.9535
I want D20 to have only 2 decimals and turn green if it equals C20. And turn red if it doesnt equal C20.
I have two columns
Column L and Column W
When I input something into Column W, I want it to turn green if it is equal to the corresponding value in Column L
So say we're on Row 50
And I put $280 in Cell W50
I want it to turn green if W50=L50
And red if W50 does not equal L 50
Infinitely in the same column
I guess this would work in a similar manner as Solver, but where Solver tweaks cell values to equal a given total, I've got a set of cells and I need to find the combination that equals an amount in another cell. Is there a way to do this?
View 7 Replies View RelatedI am trying to create a formula that shows a percentage of cells within a range that contain a particular number. This percentage is based on another cell, which is the total number of all audits. Each audit has rating columns, with a numeric value indicating it's rating. I need to count those cells within the range that equal the numeric value assigned to the rating, and then divide that total by the total number of audits to obtain a percentage of calls with each particular rating in each category.
Here is an example of what I'm trying to accomplish:
A1 = 2 (Total audits)
B1 = 07/31/2009 (Date of first audit)
C1 = 3 (Rating of first category)
D1 = 1 (Rating of second category)
E1 = 2 (Rating of third category)
F1 = 08/03/2009 (Date of second audit)
G1 = 0 (Rating of first category)
H1 = 2 (Rating of second category)
I1 = 2 (Rating of third category)
The percentage of audits within the first category that have a rating of 3 would be 50%.
The percentage of audits within the second category that have a rating of 3 would be 0%.
The percentage of audits within the third category that have a rating of 2 would be 100%.
I have a large spreadsheet converted from pdf whose data still appears in A4 reading format.
I need to move part columns of data from 6 columns to form 1 large column in column A.
For example, move range B8 to B76 beneath range A8 to A76 and range C8 to C76 beneath that etc, page by page working through all 270 pages !
Also need to delete unnecessary 'page headers' throughout as in rows 2-6
I have a excelsheet that looks like this:
Column A | Column B | Column C
Los Angeles | Fire Dept | 3
Los Angeles | Health Services | 12
New York | Fire Dept | 8
New York | Health Services | 22
New York | Internal Services | 100
New York | Public Works | 7
Chicago | Health Services | 15
Chicago | Public Works | 56
Chicago | Social Services | 4
And I am trying to make it look like this:
Fire Dept
Health Services
Internal Services
Public Works
Social Services
Los Angeles
3
12
New York
8
22
100
7
Chicago
15
56
4
In my file i can insert text to a certain cell and column but this is for one entry only. I am wishing for a run that for every entry, there is a new row.
Here's my file sample project.xlsm
You can see there the user form for a post entry. The user should fill-in code and description and if he hit save, the code and the description should be recorded on list provided the sheet.
I'm not that clued up on VBA or macros but I do have a few i regularly use, I’ve found a thread related to my problem but cant make much sense of it.
Basically i want to post the 3 cell values (C5,C7,C9) into row B20,C20 and D20 respectively. However I want these values to form a list staring with row 20 and working down onto the next available/empty row.
Marking My Post As? How do i mark my post as solved?
View 5 Replies View RelatedI'm trying to write a VBA script which will delete all rows in my Excel spreadsheet where Column I (which contains a status code) does not contain the word "Completed".
At the moment, I'm doing this the other way round: my script is able to search for entries in Column I which contain the status codes "Pending", "Awaiting Authorisation", "In Progress" etc and delete them. The idea is that when all those rows are deleted, I'll only be left with rows which have a status of "Completed". This works fine at the moment. However, the concern is that if a brand new status code is added to the data file, my script would be unable to pick it up and delete it. This is a small sample of the code I'm currently using (which deletes all the rows with statuses other than Completed):
Not sure how too do this, here is a simple example of what I want too do. Just using different buttons to post a number.
View 6 Replies View RelatedI have a list of UK Post Codes that I wish to filter but because of the format I'm getting problems.
The reason is that I'm only interested in the first part of the post code.
Example: Using IP7 6NH and IP32 8LR. If I tried to filter those using greater than then Excel would treat IP7 6NH as larger then IP32 8LR because 7 is larger then 3.
The post codes are all imported from another piece of software and are always in the format of 3 or 4 chracters, then a space and then 3 more chracters. I wish to create another column which only has the first part in it. So I wish to crop IP7 6NH down to just IP7 and IP32 8LR down to just IP32.
Then I want to make a further column which looks at the value in the first new column and returns "In" or "Out" based on some conditions.
These are the conditions. If the cell begins with CO or NR or CB or CM or PE, regardless of the rest of the value, then "Out" should be returned. If the value is between IP1 and IP6 inclusive then "Yes" should be returned.
If the value equals IP7 then "No" should be returned
If the value is between IP8 and IP17 inclusive then "Yes should be returned.
If the value is between IP18 and IP29 then "No" should be returned.
If the value equals IP30 then "Yes" should be returned.
If the value is bewteen IP31 and IP33 inclusive then "No should be returned"
I'm think that it's quite complex and maybe the way to go would be to have two other columns, one containing the "In" values and the other containing the "Out" values, that a formula can refer to when making it's yes or no choice but I don't know how to do that.
I may have missed it, but I can not seem to find where I can customize Excel to add a "paste formula" button. (I have a fair amount of copying to do where I do not want the formats being changed at the same time.)
View 9 Replies View RelatedI have the following code. It takes data from one sheet and inputs into another. When I enter a Customer ID in cell G12, starting on Row 18 and proceeding down, jobs are listed. When the macro posts into the history sheet, it posts the jobs in rows. I wish for each time I run the macro, the info is all in the same row whether theres two jobs or 20 for that customer ID. Right now it is posting like this (two jobs listed):
CustID(G12) | Name(B12) | Address(B13) | Job1(A18) | Job1Date(D18) | Job1Price(G18) |
CustID(G12) | Name(B12) | Address(B13) | Job2(A19) | Job2Date(D19) | Job2Price(G19) |
Im trying to make it look like this:
CustID(G12) | Name(B12) | Address(B13) | Job1(A18) | Job1Date(D18) | Job1Price(G18) | Job2(A19) | Job2Date(D19) | Job2Price(G19) |
Sub InvoiceUpdateHistory()..................
Is there a way with a formula to have a result of one cell pasted in a different cell? ie. C1's formula =if(and(isnumber(a1),isnumber(b1)),b1-a1,if(and(isnumber(a1),isblank(b1)), b1 = d1,"")
A B C D
12/18/06 formula above =today()
if b1 isbalnk it will copy the value of d1 to b1. I dont know if this can be done i have looked at offset and a few others but it doesnt look like this can be done but want to see if i have over looked domething
