I'm using excel to keep track of information at work and have formulas set to figure out totals weekly. The problem comes about when I sum up each column, why doesn't the column totals use the same formula as the top.
Example would be
2 X 5 = 10
3 X 8 = 24
4 X 5 = 20
6 X 5 = 30
15 23 84 sum total of all columns
15 X 23 = 345 why do I come up with 345 instead of 84 when using the same formula as above
In column A I have 10,000 road names with many duplicates. In column B I have the duplicate roads removed with only one left (about 1400). In column C I have a map code for that road, married to column B. Question; how do I get the map code to post to all the equaled roads in column A?
I have a simple formula which subtracts one cell from another. I then have an if and statement which checks if that cell is equal to zero. If so, continue processing.
The problem is that the formula always reads the cell as not equal to zero although the result of the formula contained in the cell does result in zero.
I have a countif formula that calculates the number of entries between 2 dates. However i now need to also count how many of these match a 3rd value. So i will need to work out how many "are greater than or equal to B2" "less than or equal to C2" and "equalling D2"
what i have already =(-COUNT('Current Work'!AE8:AE2000)+COUNTIF('Current Work'!AE8:AE2000,">="&B2)+COUNTIF('Current Work'!AE8:AE2000,"<="&C2))
I have some numbers around 200 numbers which are not same digits i.e. if 1st number is 7 digits, 2nd number is of 10 digits.
Like this even if i have a number of 1 or 2 digits then all number should have equal digits i.e. in 200 numbers if one numbers is of 13 digits then all the numbers should be 13 digits.
To do this first i am doing this to the right align & comparison all numbers & taking the highest digit number & pre-fixing the other numbers with zeros’ so that all number are equal in number of digits. This is taking huge time.
I want to make a macro or any easy method so that all should have equal no of digits.
I want that if 200 numbers are pasted in the column E i.e. from E2 to E201 then all should be converted to equal digits number by prefixing zeros & should appear in column G from G2 to G201.
And after converting them it should be prefixed with D/ OR D/ABC:
This will be present in B2 cell i.e. this cell will be blank always. And once I have any thing in that cell that should be prefixed to the converted numbers in the column G & they should appear in Column I.
And again the numbers in column G should be prefixed with the content in B2 & should appear in column K in the Ascending order sorted.
Suppose if , I have 500 numbers then they should be converted automatically to equal digits & appear in Column G & prefixed with the contented in cell B2 should appear in Column I & sorted series in ascending order with prefixed with cell B2 in the column K.
And if I have 15 numbers only then it should do the same job easily. Here the numbers of numbers are not defined.
All this should be get done on click of the command button.
I guess this would work in a similar manner as Solver, but where Solver tweaks cell values to equal a given total, I've got a set of cells and I need to find the combination that equals an amount in another cell. Is there a way to do this?
I am trying to create a formula that shows a percentage of cells within a range that contain a particular number. This percentage is based on another cell, which is the total number of all audits. Each audit has rating columns, with a numeric value indicating it's rating. I need to count those cells within the range that equal the numeric value assigned to the rating, and then divide that total by the total number of audits to obtain a percentage of calls with each particular rating in each category.
Here is an example of what I'm trying to accomplish:
A1 = 2 (Total audits) B1 = 07/31/2009 (Date of first audit) C1 = 3 (Rating of first category) D1 = 1 (Rating of second category) E1 = 2 (Rating of third category) F1 = 08/03/2009 (Date of second audit) G1 = 0 (Rating of first category) H1 = 2 (Rating of second category) I1 = 2 (Rating of third category)
The percentage of audits within the first category that have a rating of 3 would be 50%. The percentage of audits within the second category that have a rating of 3 would be 0%. The percentage of audits within the third category that have a rating of 2 would be 100%.
I'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
How do you make the Autofill function increment in blocks, e.g. instead of increment 1,2,3 increment 1,8,15 inthe following example: I have a 2 worksheets, one with days of the year across columns and values down rows, and another that summarises the sum of the corresponding days in weeks, so I have 365 columns in sheet 1 and 52 columns in sheet2. Everytime I update the sum range i cannot autofill it in the summary worksheet, as A1:G1 autofills to B1:H1, but I want it to increment to H1:N1.
i am trying to complete a spreadsheet which most of it is done but one column i have i have to average everyother square in each column which i did but when i total those columns at the end i get the dreaded #div/01 which means any value that i dont have in a particular column it will not add is there anyway to fix this. i am attaching a sample of the spreadsheet so you can see exactly what i am trying to do .
I have some student marks in columns B to F. If some one get below 40 marks he fails and the subject in which he has been failed will come in Remarks column. If he has passed in all subjects remarks column will show Pass.
To bring failed subject initial in Remarks i have to create 5 additional column and then thru Concatenate i joined them.
Is There any formula to show fail subject in Remarks column without creating 5 additional columns?
I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
I have a spreadsheet with a unique key for a customer in column A, and then I have the data by month in columns B-D. Some customers have multiple lines, so I have used a sumif to sum for that customer. My question is this: I would like to know if there is a way to write a formula such that the value returned is the sum of all three columns (B-D) so I would see the total for a customer for the quarter. I can get around this by writing three sumif formulas, but I figure there must be an easier, simpler, way.
I'm trying to create a formula for text to columns if a SKU is put into a box.
Ex) I put code 5495307H7G-**--A into cell A1. I need to split it after specific positions, so it breaks into nine individual codes (9 cells) in the adjacent boxes.
549 53 07 H 7 G- ** -- A
I've seen formulas for searching for spaces and splitting, but is there a way to split one long code at specific points?
I would usually do this in a pivot table (which works fine) but I need something else as the person I am passing this on to will not know how to change the range and this 1 report is a part of a larger report which should just be as simple as: Data download >>> calculations run automatically >>> print
I need to sum up various bits of information. The attached file is the example. The DATA tab holds the information and the REPORT tab shows the column headers that I am after. These columns are as below:Contractor Name: The formula should look through the DATA tab and bring back a contractor nameApproved Quotes: Then taking the name from the above field, the formula should add up column T where column AP = YesApproved WO Count: This one should just add up how many rows the above total is made of.Rejected Quote: Then taking the name from the contractor field, the formula should count add up column T where column AP = NoRejected WO Count: This one should just add up how many rows the above total is made of.
The PIVOT EXAMPLE tab holds the example with the red highlight being excluded.
I need column F to be matched to column E, i want to see how many user id's from column F are in column E and for them to be highlighted in column E. note that the user id's might reflect more than once in column E. See attached..
Using the formula =E+1 will produce a sequential list when copied down. Changing to E+2 produces a list that increases by 2 in each row.
I am looking for a formula that will give me a list of column references that increase by 2 . If the first row is row "F" the next row will be "H" then "J" and so on.
I am looking for vba or formula can delete all columns in spreadsheet except for certain columns let's say I want to say delete all except for columns a, d, f
I have code that looks at F1 to see if there is a value and then performs code where it looks down column D and if the condition is met it puts in one of two formulas
I then do the same thing for G1 Unfortunately, I am not VBA smart enough to recreate this code to adjust itself so I copied it and manually tweaked it.
Here is my dilemma, I need to do this for every column that has a value in row 1 from column F:BZ this would take me forever.
So right now I have a formula that I'm using in column "C":
=IF(B4="","",IF(AND(B4=22),"IN RANGE","OUT OF RANGE"))
So basically column C tells you if the number in the B column in within the range of 22-30. Now I want to write the formula in column D and make it apply to columns B and C.
So cells in columns B and C will have a number value in it and I will make column D where the formula is. There will be a number in B or C, but never at the same time. I can't figure out how to alter the formula to do this.
In the first row of my table are the targets for each period of the year and in the second row is the actual performance. The targets for the year will be populated throughout but only periods so far will have a figure for the actual performance.
As you can see, I want to use text to column by "/" as a formula to basically have 10 cells autopopulate from C2-4 to M2-4.
I understand that people suggest using left, mid, and right, but to my knowledge it seems like this would only work on text to columns with 3 items. I have 10 items in each row that should be split by "/" .
The following data is in columns in G:J Branch GLPeriodBalance Montreal451010P1(25,159.08) P2(20,628.36) P3(21,441.91) P4(29,388.80) P5(23,266.03) P6(22,408.55) P7(28,048.49) P8(24,654.56) P9(25,117.77) P10(33,127.30) P11(28,017.71) P12(26,946.62)
I need a formula under desired result. I need to find Montreal in column B in Column G.
I also need it to find 451010 in Column C in Column H. Then I also need to find the Period P1, P2….P12 in column D in column I. Then the matching value in J should be inserted in column E. This is a large table and the values are in the right columns but they could be anywhere that is why I need a formula I can copy down.
In my spreadsheets, I want to insert a formula in the existing columns of data. This is to be done after every 2 columns. There are 25 rows as well from 5 to 30.
