Formula Equaling Zero Is Not Equal To 0
Dec 14, 2009
I have a simple formula which subtracts one cell from another. I then have an if and statement which checks if that cell is equal to zero. If so, continue processing.
The problem is that the formula always reads the cell as not equal to zero although the result of the formula contained in the cell does result in zero.
View 5 Replies
ADVERTISEMENT
Jan 2, 2012
I'm using excel to keep track of information at work and have formulas set to figure out totals weekly. The problem comes about when I sum up each column, why doesn't the column totals use the same formula as the top.
Example would be
2 X 5 = 10
3 X 8 = 24
4 X 5 = 20
6 X 5 = 30
15 23 84 sum total of all columns
15 X 23 = 345 why do I come up with 345 instead of 84 when using the same formula as above
View 4 Replies
View Related
Jan 15, 2014
I have two columns
Column L and Column W
When I input something into Column W, I want it to turn green if it is equal to the corresponding value in Column L
So say we're on Row 50
And I put $280 in Cell W50
I want it to turn green if W50=L50
And red if W50 does not equal L 50
Infinitely in the same column
View 5 Replies
View Related
Feb 26, 2008
I have a countif formula that calculates the number of entries between 2 dates. However i now need to also count how many of these match a 3rd value.
So i will need to work out how many "are greater than or equal to B2" "less than or equal to C2" and "equalling D2"
what i have already
=(-COUNT('Current Work'!AE8:AE2000)+COUNTIF('Current Work'!AE8:AE2000,">="&B2)+COUNTIF('Current Work'!AE8:AE2000,"<="&C2))
View 4 Replies
View Related
Jun 27, 2009
I have some numbers around 200 numbers which are not same digits i.e. if 1st number is 7 digits, 2nd number is of 10 digits.
Like this even if i have a number of 1 or 2 digits then all number should have equal digits i.e. in 200 numbers if one numbers is of 13 digits then all the numbers should be 13 digits.
To do this first i am doing this to the right align & comparison all numbers & taking the highest digit number & pre-fixing the other numbers with zeros’ so that all number are equal in number of digits. This is taking huge time.
I want to make a macro or any easy method so that all should have equal no of digits.
I want that if 200 numbers are pasted in the column E i.e. from E2 to E201 then all should be converted to equal digits number by prefixing zeros & should appear in column G from G2 to G201.
And after converting them it should be prefixed with D/ OR D/ABC:
This will be present in B2 cell i.e. this cell will be blank always. And once I have any thing in that cell that should be prefixed to the converted numbers in the column G & they should appear in Column I.
And again the numbers in column G should be prefixed with the content in B2 & should appear in column K in the Ascending order sorted.
Suppose if , I have 500 numbers then they should be converted automatically to equal digits & appear in Column G & prefixed with the contented in cell B2 should appear in Column I & sorted series in ascending order with prefixed with cell B2 in the column K.
And if I have 15 numbers only then it should do the same job easily. Here the numbers of numbers are not defined.
All this should be get done on click of the command button.
View 9 Replies
View Related
Apr 20, 2013
Conditional Formating Text equaling to Number formats:
Example:
C20 is '436.59 (its pasted as text often is must remain as text) and D20 is 436.9535
I want D20 to have only 2 decimals and turn green if it equals C20. And turn red if it doesnt equal C20.
View 1 Replies
View Related
Sep 30, 2006
I guess this would work in a similar manner as Solver, but where Solver tweaks cell values to equal a given total, I've got a set of cells and I need to find the combination that equals an amount in another cell. Is there a way to do this?
View 7 Replies
View Related
Jan 26, 2009
In column A I have 10,000 road names with many duplicates. In column B I have the duplicate roads removed with only one left (about 1400). In column C I have a map code for that road, married to column B. Question; how do I get the map code to post to all the equaled roads in column A?
View 4 Replies
View Related
Aug 4, 2009
I am trying to create a formula that shows a percentage of cells within a range that contain a particular number. This percentage is based on another cell, which is the total number of all audits. Each audit has rating columns, with a numeric value indicating it's rating. I need to count those cells within the range that equal the numeric value assigned to the rating, and then divide that total by the total number of audits to obtain a percentage of calls with each particular rating in each category.
Here is an example of what I'm trying to accomplish:
A1 = 2 (Total audits)
B1 = 07/31/2009 (Date of first audit)
C1 = 3 (Rating of first category)
D1 = 1 (Rating of second category)
E1 = 2 (Rating of third category)
F1 = 08/03/2009 (Date of second audit)
G1 = 0 (Rating of first category)
H1 = 2 (Rating of second category)
I1 = 2 (Rating of third category)
The percentage of audits within the first category that have a rating of 3 would be 50%.
The percentage of audits within the second category that have a rating of 3 would be 0%.
The percentage of audits within the third category that have a rating of 2 would be 100%.
View 9 Replies
View Related
Oct 31, 2009
I am trying to set a scorecard up where it will give points depending on the % actual. For example:
if less than 60%, then 0,
if equal to or greater than 60% but less than 75%, then 1
if equal to greater than 75% but less than 80%, then 2 and so on.
I have been playing around with the example below, but can't seem to get it working.
[php]=IF(A1<60%,0,IF(A1>A1<75%,1,))[php]
Maybe it 's because I pickled my brains last night.
View 4 Replies
View Related
Nov 25, 2008
Is it possible to do an IF formula based around a value it does not equal?
eg I have one column, that is perforning a SUMIF providing that a certain cell is equal to a particular constant.
=IF([cell]=[value],SUMIF([range],[criteria],[sum_range]))
In the next column I want to do it the other way round so that:
=IF([cell] DOESNOT=[value],SUMIF([range],[criteria],[sum_range]))
Is it just a simple symbol??
View 2 Replies
View Related
Jul 11, 2012
i want formula in b1 to get the formula in a1 without Equal Sign
A1=(A2*A3)+2
Reults B1 should be (A2*A3)+2
View 4 Replies
View Related
Feb 5, 2013
I am new to using SUMIF. I successfully wrote a formula telling it to sum one column for each row in another column where it equal "Forecast*". Now, I want to write a formula that says to sum a column for everything in the other column that does not equal "Forecast*". I tried using , but either it did not work, or I did not use the right syntax.
View 5 Replies
View Related
Jun 16, 2009
I need a formula that looks at the total in H40 and if the number is between 32 and 40 I need it to return the number then if the number exceds forty I need to multiply the overage by 1.5 and add it to the 8 for a total of 11.
I think it would be something like:
SUMIf(H40>"32",
View 9 Replies
View Related
Apr 14, 2014
I have three workers for which I am counting the data from using a countas formula. The cells are A1,B1,C1 and I want to highlight in another formula to the right if these three values do not equal each other, I have tried and if formula referencing each of the combinations of the compares however it does not work in the desired fashion.
View 3 Replies
View Related
Nov 14, 2006
I have a code which will delete all rows where the value in column C is blank. However my formula is column C is the following:
=SUMPRODUCT(--(ENERGY!$B$5:$B$147=B15),--(ENERGY!$E$5:$E$147=A15),ENERGY!$C$5:$C$147)
Is there a way to change this formula so that if a value is not returned, I get a blank cell?
View 9 Replies
View Related
Nov 1, 2008
how to set up an equation for an unknown variable in a formula equal to 0 (an Even-Money Probability Formula for Risk Arbitrage assessments).
The formula is as follows, where I am attempting to solve for Pe:
(Pe*EP)+(P2*EL)=0
Pe=even money probability (placed in column B1 in Excel)
EP=expected profit if deal closes (placed in column B2 in Excel)
P2=probability of deal breaking up (=1-Pe) (placed in column B3 in Excel)
EL=expected loss if deal breaks up (placed in column B4 in Excel)
B1*B2)+(B3*B4)=0
So, once again, I am attempting to solve for Pe, or column B1
B1=(-(1-B1)*B4)/B2
say, EP (or B2) =$2.00 and EL (or B4)=-$4.00
B1=(-(1-B1)*-4)/2
B1=2*(1-B1)
View 2 Replies
View Related
May 19, 2009
I would like to use IF function, to get the answer, if the mark is less than or equal to 20, the answer is AVERAGE, if the mark is between 21 and 25 the asnwer is GOOD, if the mark is between 26 and 30 the asnswe is VERY GOOD, if the mark is above 30 then the asnwer must be EXCELLENT.
View 4 Replies
View Related
Mar 19, 2014
I have two date columns, a start date and end date. Another columns tells me the number of days between these two columns. It may return 45 days which actually straddle 3 different months.
My aim is to identify between this date range how many days in Apr 14. Then in the next column howmany days in May 14 etc
So on the spreadsheet Id have 12 columns for each month of the year. in Apr 14 for each row between the given date range I want it to tell me how many days are actually in April. Id then copy that formula into the May 14 column.
View 1 Replies
View Related
Oct 1, 2008
I have a formula in Excel2003 that is working fine except for when D12 is blank. When D12 is blank I want the result to equal either zero or blank.
=IF(ISBLANK(E12),NOW()-D12,E12-D12)
View 2 Replies
View Related
Feb 10, 2014
Report I generate once a month that checks to see if tasks are done on or before their due date. Sometimes it works, and others it doesn't...
The basic formula is: [Code] .....
If they closed their task by or before the due date, the condition should be true and it should output "Compliant" beside their task. Otherwise their "Over Due".
The forumla works except when they close their task ON the due date. No matter how I tweak the forumla, it thinks the condition is false as if it cannot tell when the two dates match.
View 1 Replies
View Related
Apr 18, 2008
I'm trying to set a cell on one sheet to be equal to the product of two cells on another sheet. The problem is that one of the cells on the other page is dependent on the variable T. This is what I've got and it's giving me errors
Worksheets("Output").Range("K14").Formula = "Worksheets("Calcs").Range("D17")*worksheets("Calcs").Range("D17").Offset(10+T,0)"
When I record a macro it gives me this, but again, I need the last cell in terms of "T"
ActiveCell.FormulaR1C1 = "=Calcs!R[3]C[-7]*Calcs!R[14]C[-7]"
View 3 Replies
View Related
Jul 5, 2007
I'm having trouble with a small vba macro. At the end of the macro I test to see if two variables are equal and then print out true or false. However, for some reason even though the variables are equal vba is not treating them that way. I have put the values that represent the variables on a spreadsheet and used the if(x1=x2) formula and it says it is true, also, when I debug the macro and watch the values when it comes to test the logical expression the numbers are the same. I don't understand why vba does not say that the two variables are equal. I have attached a screenshot of the breakpoint where I double check the values are equal.
View 2 Replies
View Related
Apr 21, 2014
I can assign a number of copies to print by adjusting ActiveWindow.SelectedSheets.PrintOut Copies:= , but what I want it to have the number of copies auto adjust to the value of a cell that contains a formula. I was hoping it would something as simple as Copies:=cell but no luck...
View 2 Replies
View Related
Nov 13, 2013
SUMIFS with less than & more than
I found this thread which works for normal ranges
I want to Sum for Values Greater than a specific date in my formula.
This first one works for a specific date (Relevant reference in red), so say 01/01/2014
Code:
=SUMIFS(Table2[[#All],[Basic]],
Table2[[#All],[Cluster]],Table3[[#Headers],[Company]],
Table2[[#All],[Start Date]],Table3[#Headers],
Table2[[#All],[Perm / Temp / Prof / ETA]],[@Company])
Code:
To Sum for ranges >= 01/01/2014, I have tried this below based on the thread above but Excel does not accept this.
=SUMIFS(Table2[[#All],[Basic]],
Table2[[#All],[Cluster]],Table3[[#Headers],[Company]],
">="Table2[[#All],[Start Date]],Table3[#Headers],
Table2[[#All],[Perm / Temp / Prof / ETA]],[@Company])
View 4 Replies
View Related
Dec 18, 2012
Simply need a cell to count another cell is equal to certain value.
For example if B3 has a value of 6 then I need J3 to equal 1 or if B3 is equal to 3 than I need G3 to equal one. I tried the the COUNTIF but I am sure i am using it incorrectly.
View 1 Replies
View Related
Aug 21, 2008
Trying to find the sum of all cells in the array described in the formula that are equal to the values inside the quotations. I used this exact (as far as I can tell) formula to find the sum of values that were NOT equal to my quoted values and it worked just fine. Any ideas why formula 'A' will not work but formula 'B' does work? I have a feeling I'm missing something simple here!
Formula A - Does not work:
=SUMPRODUCT(--('Master Lead Sheet'!$J$2:$J$10000=$B2),--('Master Lead Sheet'!$N$2:$N$10000="REJECTED"),--('Master Lead Sheet'!$N$2:$N$10000="CONDITIONED"),--('Master Lead Sheet'!$N$2:$N$10000="APPROVED"))
Formla B - Works:
=SUMPRODUCT(--('Master Lead Sheet'!$J$2:$J$10000=$B2),--('Master Lead Sheet'!$N$2:$N$10000"No Answer"),--('Master Lead Sheet'!$N$2:$N$10000"Disconnected"),--('Master Lead Sheet'!$N$2:$N$10000"Wrong Number"),--('Master Lead Sheet'!$N$2:$N$10000"EMAILED"),--('Master Lead Sheet'!$N$2:$N$10000"needs to be emailed"),--('Master Lead Sheet'!$N$2:$N$10000"Refund"),--('Master Lead Sheet'!$N$2:$N$10000"REFUNDED"))
View 9 Replies
View Related
Feb 13, 2009
This is for mileage purposes. I have two sheets. 1st sheet I have Date, From, To, Mileage. I want the Mileage cells to automatically equal the mileage it is from and to. Right now I have it setup like this on the 1st sheet B7 is Date, C7 is From and D7 is To and E7 is Mileage. I have a drop down menu for C7 and D7 for our facilities such as Ming Ave (MNG), Coffee Rd(COF) and so on. On the 2nd Sheet I have the chart that show the miles.
example MNG to COF is 8.3 miles.
View 9 Replies
View Related
Apr 17, 2014
How to correct my formula because it does not work?
Here the formula: =COUNTIFS(Data!C2:C24005,A17,Data!M2:M11149,"<=0")
I need to insert the formula in column C (Findings tab) which counts the rows in Column M (tab named "Data") that equal A17 (Column A in "Findings" tab) and which are less or equal zero. In addition if I drag the formula down I want to only the values be entered in highlighted in blue cells in column C (SKUs With Zero Sales in "Findings" tab) and empty cells in not highlighted cells. I attached images of these two tabs: Data and Findings.
View 5 Replies
View Related
Jun 29, 2008
I'm trying to count if there are situations where column a is equal to a specific number and column b is equal to another number.
both columns are numbers. Does anybody have a good idea how to do this, maybe countif, but i am not sure how to do more than one item with that.
View 9 Replies
View Related