Chk Valus In 3 Cols If Lengh Of Charecter Is Met Or Move To Next Sheet
May 26, 2009
I have 40000 rows of data to check. I always filter Column E by Suppplier Name, like supplier Alpha or Bravo,Charlie,Donkey, or Elephant,France,Goal etc.
What I manually check is I filter the column E by Alpha, then I will get some 5000 rows of data of Alpha, I will look if all the rows in Column B contais "-3digit" numbers like -123,-548 etc if not I will assume its incorrect and copy the entire row and put it in next sheet.
If Column B is right that is, if it contains -3digit then I will again look in Column F ( Invoice Numbers) the invoice number should always be 5digt-4digit all numbers without space or any special charactors except Hypen(-). It may have 5digt-4digit-5digit-4digit etc, if any values doesnt match with the said criteria i will again assume it as incorrect and move to the next sheet.
Now once this is done i will filter againn Column E by "Bravo" all the conditions are same, that is if the supplier name is Alpha Bravo, charlie, Donkey, or Elephant then i will do all the checks mentioned above or else i will ignore all other supplier....
View 9 Replies
ADVERTISEMENT
Jun 11, 2008
http://www.mrexcel.com/forum/showthread.php?t=323741
From the above thread I am using the following macro...
Sub MoveOver()
Dim MoveRange As Range
Application.ScreenUpdating = False
With Range("B1", Range("B" & Rows.Count).End(xlUp).Offset(, 21))
.AutoFilter field:=1, Criteria1:="=C&P"
On Error Resume Next
Set MoveRange = .Offset(1).Resize(.Rows.Count - 1).SpecialCells(xlCellTypeVisible)
On Error GoTo 0
.AutoFilter
End With
If Not MoveRange Is Nothing Then
MoveRange.Insert Shift:=xlToRight
End If
Application.ScreenUpdating = True
End Sub
I am getting an error 1004 message saying cells cannot be moved off of the spreadsheet. However, my last cell on the sheet is J28956.
Columns B through J contain data. Columns beyond J do not contain data.
Can someone give advice on getting the macro to work.
View 9 Replies
View Related
Sep 3, 2012
I need to discern the first row where columns B or C or D or E become non-zero. This is because column A countains dates, and if I subtract one day from the date in the non-zero row I have the date of the analysis I'm examining.
The problem i have is that the code I've put together below gives me the date of the absolute last row in the spreadsheet, "31/12/2015 23:30:00" from row 70129 which isn't that useful. I'm expecting a date in August just gone which is on row 11618.
Code:
Sub test()
Dim lngLastRowU1 As Long
Dim lngLastRowU2 As Long
Dim lngLastRowU3 As Long
[Code]....
View 1 Replies
View Related
Oct 21, 2008
I use the formula below to hide rows on the current sheet using the value in cw104 on sheet "POINTS"as the upper limit & cw105 as the lower limit.
Rows(Sheets("POINTS").Range("cw104") & ":" & Sheets("POINTS").Range("cw105")).EntireRow.Hidden
i want to do the same thing with the formula below, but for columns (i want to use the value in cell cw106 on sheet "POINTS" as the upper limit & cw107 as the lower limit.
Columns("aE:aF").EntireColumn.Hidden = True
i tired it like this and it wouldnt work
Columns(Sheets("POINTS").Range("cw104") & ":" & Sheets("POINTS").Range("cw105")).EntireColumn.Hidden
can the col be numerical values and not letters?
View 9 Replies
View Related
Aug 22, 2009
I need to automate the attached as per the following (by not recording macro unfortunately).
Sheet one has a dump of data. First, I need to change the data format from yyyymmdd to dd/mm/yyyy. Then I need to filter for region EU and only copy the filtered data from columns A, C-D, F and the difference from columns I-J to Sheet 2. Then in Sheet 2, I need another column to calculate the difference per unit.
View 9 Replies
View Related
Jan 9, 2007
My excel file was imported from a 3rd party and has many blank rows across the entire sheet.
I want to delete these rows if every cell across is blank.
How is this accomplished?
I tried the formula "=isblank(C2:C18)" however I get a "False response on those rows that are completly blank.
View 9 Replies
View Related
May 29, 2007
i have data that will vary from item to item in the $ of rows associated
and the # of columns to be dealt with.
item1 Line 1
Line 2
Here i want to have a formula put and copied across X columns
item2 Line 1
Line 2 other data going across in the columns
Line 3
Line 4
Here i want to have a formula put and copied across X columns
item3 Line 1
item4 Line 1
get my meaning??
columns involved will be known before i get to this bit of code !!
as an example lets say it's 8 columns
using the record macro i get this bit of code
Range("E14:M14").Select
Selection.FormulaR1C1 = "=SUM(R[-10]C:R[-1]C)"
This is fine but i don't know what row or the columns are before i run the macro so the Range
("e14:M14").select wont really work.
I've sent sometime going through MRexcell searching for tips but found nothing also googled for dynamically pasting across unknown columns
this is close to my idea in my mind conceptually
Range("C2:C" & LastRow)
but it doesn't make the columns dynamic eg column 8 being = H and then P = 8th column on and the last with data.
View 9 Replies
View Related
Oct 1, 2007
I know there have been many posts about multiple conditions in arrays, but I didn't find one that applied to my situation, so I'm hoping can help me out of jam. I'm using Excel 2000 on XP.
I have a database of sales information. Customer name is listed in column C, and columns F through Q contain the sales for the months of July - June (fiscal calendar year), with the headers for the months in row 4. There can be many rows of sales for the same customer, hence the need to sum them.
Example
C F G H
CUSTOMER JULY AUGUST SEPTEMBER
customer1 2 3 4
customer1 2 3 4
customer2 2 3 4
customer2 2 3 4
The problem is that this information will need to be updated every month to reflect sales year-to-date, meaning that the conditions for summing the data will change depending on how far into the year we are. So for instance, in August I will need to sum all the records for customer1 in the July column (column F) and the August column (column G), but next month it will have to sum the records for customer1 from July, August, and September (col H).
The result of this information would be displayed on a different worksheet. My thought was to assign a range of 12 cells (Sheet2!A1:A12) and to populate those cells with any of the months that need to be summed thus far. So for example, through September, A1 = "July", A2 = "August", and A3 = "September". Then the formula would use those values to evaulate the conditions. So in plain English the formula would:
sum the values in columns F : Q where the monthly header = the values in the range Sheet2!A1:A12 for all records where CUSTOMER = CustomerName
View 9 Replies
View Related
Apr 17, 2014
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that will move data by date from an (Entry) sheet to a (Historical) sheet. I want to enter a date in B3 on the (Entry) sheet. I then enter data into C3. What I would like to happen is when the data is entered into C3 the sheet goes and finds the same date that I entered in B3 and copies that data from C3 into Column E of the (Historical) sheet.
Test3.xlsm
View 5 Replies
View Related
Apr 16, 2014
I need to move the rows from one sheet to another sheet upon clicking the ‘Submit’ button.
I will manually update my efforts in ‘Sheet 1’ and when I click ‘Submit’, it should “copy” the rows to the next sheet (Sheet 2). However, it should not duplicate the entries irrespective of clicking Submit multiple times. Obviously, while clicking ‘Submit’ it should check the entry for that particular employee name and date in the ‘Sheet 2’ and remove that completely and update the new entries and this should avoid duplicates for that date. Every time when I add new entries for a different name and for dirrerent employee, it should keep appending the Sheet 2.
In addition, it should avoid copying the blank rows from Sheet 1 (S. No column will not be blank usually) to Sheet 2.
All this should happen upon clicking the Submit button.
View 9 Replies
View Related
Jul 9, 2014
I have an issue with an export file which is produced in CSV format and needs to be aligned. I have attached a sample of what I refer to.
My Source excel file looks like:
ABC A-101 B - 202
DEF B-203 C - 100
The destination should align with the relevant column headers and place a blank if it doesn't match. Other have queried a similar thing, however my header and data and description is actually in the same cell with a dash separating them.
The output I want is:
A B C D
ABC 101 202
DEF 203 100
There are multiple row of employees with varied column headings as its dependent on what system access the user has. The headings i.e. A,B,C for example is a fixed number of headers.
In my real data set the headers represents a 3 letter system prefix e.g. ZCR,ILP etc
View 1 Replies
View Related
Sep 24, 2009
using VBA, where if in Column I = "TRUE", move the entire row plus the 1 row underneath to sheet named "PaymentData?
View 9 Replies
View Related
Feb 12, 2014
I have an excel spreadsheet,I have a problem and I need a macro , in sheet1 I have several values of 7 numbers in a cell, example 1|2|3|4|5|6|7| up to 93|94|95|96|97|98|99|, which can be found on the columns A, B, C, D, E, F, G, H, I, and I want for example to extract all values that begin with the number 1 ,and to put all the values in the worksheet 2 columns A, B, C, D, E, F, G, H, I,,
For example 1|2|3|4|5|6|7| ,,,,,, up to 1|94|95|96|97|98|99| moved in sheet2 from sheet1.
I tried to extract the filter from the data tab .... sort and filter,,, filter,,,, filter by number,,,, starting with,,,, we apply the filter, but when we selected data values and take that were among the selected what was not good.
I like this :
column A 1|2|3|4|5|6|7| , 21|25|32|43|51|60|73|, 1|2|3|4|52|69|78| ,11|12|30|45|50|61|79| ,3|5|70|74|75|77|79| , 1|22|33|44|50|63|75|, 1|22|33|44|50|63|75|................
column B 1|2|3|4|5|6|23| , 1|2|3|4|5|6|8| , 1|2|3|4|5|6|9| , 1|2|3|4|5|6|10| , 11|21|31|40|52|61|70| , 9|2|3|4|50|68|70| , 1|12|13|24|51|60|77| ,.........
column C 1|2|3|4|50|65|70| , 2|5|7|9|10|16|37| ,5|8|9|14|15|26|67|,,,,,,,,,,,1|94|95|96|97|98|99|.
In these columns I want to extract all values that begin with nr1 .....1|2|3|4|5|6|7|,,,1|90|91|92|93|94|95| from sheet1 in the sheet2, I mean these...
column A 1|2|3|4|5|6|7| ,1|2|3|4|52|69|78| ,1|22|33|44|50|63|75| ,1|20|31|43|55|60|71|
column B 1|2|3|4|5|6|23| , 1|2|3|4|5|6|8| , 1|2|3|4|5|6|9| , 1|2|3|4|5|6|10| ,1|12|13|24|51|60|77|
column C 1|2|3|4|50|65|70| , 1|94|95|96|97|98|99|
View 3 Replies
View Related
Nov 29, 2008
How can I code a Picture so it moves atop a excel sheet?
I dont like the behavior this code runs.
ActiveSheet.Shapes("Picture 1").Select
Selection.ShapeRange.IncrementLeft 0.75
View 10 Replies
View Related
Dec 23, 2009
i learned how to highlight a row by placing an X in a single cell, my next question is:
Is there a way (most Likely there is) By placing "J/C" into a cell, make the entire row cut and then insert itself into my second sheet on row 2? "insert into a new row and not over existing information?"
now i have done this in the past using a Macro, select the row and then by pressing ctrl+k it would cut the row and then insert it into row 2 of the second sheet.
View 14 Replies
View Related
Oct 8, 2008
I want to know the shortcut key for to move one sheet from another sheet without using mouse.
View 3 Replies
View Related
Dec 1, 2007
I have a "Log Sheet" with dates in one column and times in another column.
Currently I have a formula which matches the months of the year and totals the time during that month below is this formula. (This formula id on the same sheet.
=SUMPRODUCT(--(MONTH($A$5:$A$1426)=1),--(YEAR($A$5:$A$1426)=2008),$F$5:$F$1426)
Now I am trying to clean up the sheet and I want to move all the results onto another sheet Lets call it sheet 2 and sheet 1
sheet one will have the months and times.
sheet 2 i want the formula in each cell, andto place the result in each respecting cell/
This is what I came up with but why is it not working?
=SUMPRODUCT(--(MONTH(Sheet1!A:A)=11),--(YEAR(Sheet1!A:A)=2007),Sheet1!F:F)
View 9 Replies
View Related
Jan 24, 2010
i am trying to get a vba procdeure to copy Sheet "Template" and move to the end, but when i run the code, the code copies the template but does not move to the end, how can the below be modifed?
Sub Macro3()
Sheets("Template").Select
Sheets("Template").Copy Before:=Sheets(6)
End Sub
View 9 Replies
View Related
Nov 8, 2006
I convert many large files from csv to Excel. Once I import the csv to Excel I must break the worksheet into multiple depending on when a Cell in column F is equal to a "cata" of which I do successfully with a macro.
The next step in VBA I attempt; is to go 10 cells to the right of the active cell (cata) and anchor that cell address so I may copy the range from "A1" to the anchored cell address.
I have been unable to pass the the value 10 cells to the right of the active cell. I would be grateful of any suggestions.
Here is the VBA Code I've been trying. (It bombs after it finds the cell 10 cells from the active cell.)
Sub SelectRange()
ActiveCell.Offset(0, 10).Select = EndRange
Sheets("Sheet1").Activate
Range("A1,EndRange").Select 'not working'
Selection.Cut
Sheets.Add
ActiveSheet.Paste
End Sub
View 9 Replies
View Related
Dec 4, 2013
I have a large document with a lot of names listed. I want to make up new sheets for each person listed. Is there a formula that I can enter that will move the entire row based on the person's name? See attached.
View 3 Replies
View Related
Dec 10, 2008
I searched and found a couple of different active.sheet codes but could not get it to work. What I want to do is move the worksheet tab I create in the code below all the way to the end (right) of the worksheet tabs already in my workbook.
View 2 Replies
View Related
Feb 12, 2014
Is it possible to create a cell in one sheet, where after data is entered, will move it to another sheet. Additionally, the data in the cell, after the transfer to another sheet is made would delete itself. Once the data is entered, sent to another sheet and deleted, next time data is entered into the same cell, it would be sent into a row below the cell that the first piece of data would be in. Therefore, after I enter data, [for example] press enter, then go back to input some more data, after a while there would be a long list in another sheet. The last feature of the problem (it would be something extra really) is that the function/macro is to be time dependent - during one month the data would stack up in one column, after the next one begins, the next column will automatically start all over.
The idea is to create a budget book - where on the main page I would only have to enter the value in a specific box, the value then would be automatically sorted into the right row and column in another sheet, after the month/week ends, data would start to stack up in a column devoted to a new month/week.
Of course the data could be entered manually in different sheets, but it proved to be too complex to be useful.
View 1 Replies
View Related
Jul 24, 2014
Macro, which can cut/Paste from sheet "Pastin" to Sheet "Robot".
The input in sheet Pastin is veritical and the the result is in a row horiontsal.
There can be no references between the names for the columns or rows, only the cell to move.
I would like it to be so when I run the macro it example move it to sheet robot from row A3, and if I do again it make the next one from Row A4.
What I want to move can be seen in below.
Cell on the left is sheet "Pastein" and cells on the right is sheet "Robot"
Special is that one move have to be taken from on cell comma separated input, so it goes to sheet "Robot" for each text/number, between the comma.
I have attached a test sheet to work with also.
[Code] ...
Testmove.xls
View 6 Replies
View Related
Jan 29, 2014
So I have a sheet that has 9 columns A - I sheet is called "Door Switch Times"
Basicall when column F gets data in it I need then a macro to automatically Copy B, C, D to a
new sheet called "Main". I need B to be copied to C on Main, "C" on Door Switch Timse to be copied to "D" on main and "D" on Door Switch Times to be copied to "E" on Main. I cant post the sheet as my work computer will not allow me to transfer or share files.
View 7 Replies
View Related
Feb 25, 2009
I have a small problem that is more annoying than anything else. I have a command button that opens a userform, and the user can select a value and 'OK'. On 'OK', the code runs, however I would like the sheet 'Information' to remain visible until the code finishes and then switch to 'Task Intervals'. There is also a lot of screen flicker, despite selecting it off/on. I have included an Example file so that you can see the problem.
View 3 Replies
View Related
Aug 13, 2009
I have the following code to move/copy worksheet and then copy and paste
special values. Is it possible during this process to get the user to change the 'moved' worksheet name ?
View 4 Replies
View Related
Sep 16, 2009
In Sheet1 is 11 headings.
In column I, titled 'complete?' the user simply puts an x to show that the order is complete.
Once this happens, I would like the information in the row containing the x from columns A to I (but not J and K) to be copied to the next empty row in Sheet2. Then to clear the information from the cells in the row of Sheet1 from columns C to I, but have the data in columns A,B,J,K remain for the next order.
View 4 Replies
View Related
Sep 18, 2009
I understand how to create a basic function and call a function so those things are there. What I am looking at doing is taking the value of the calendar control and placing it in a text box, say TextBox2 for instance. Right now the calendar control is called when the text box has focus and the calendar closes Unload Me when the day is clicked though I don't know how to make the textbox value equal the calendar value.
This is something I am sure is pretty simple though I just can't get it to work. The calendar control is on a userform and the text box is on the active sheet so this is where i am running into trouble i am thinking.
View 5 Replies
View Related
Jan 27, 2012
I need making a button that can move a row to another sheet.
I have a master sheet with the following data.
Col A - Name
Col B - address 1
Col C - City
Col D - State
Col E - Zip
Col F - Phone number
each row is a diffrent person.
the phone number will be the selected cell and I need a button to move the whole row to another sheet.
View 2 Replies
View Related
Dec 5, 2012
I need write a VBA code that will move an entire row into a new sheet if the value of the last cell says "YES" If the value is blank then Id like it to stay in the current sheet. I would also like it if the cell wont allow any other value other than Yes to be typed.
I found this code here:
Copy, Move and Delete Row, based on Cell Value
THE VERY FIRST CODE REPLIED IN THAT THREAD.
I just cannot seem to get it to work. Simply copying and pasting that into the module doesn't work. I am not very good at VBA and just started taking a course on VBA. Id like to jump into this problem asap as I need it for work.
Basically:
Columns A:E will have values. In Column E I would like to type in Yes if completed. I would like the Macro to run through all of Column E and if the cell value is "YES" then I want it to cut the entire row and paste into a new sheet. In the new sheet I would like it to be pasted into the next available row.
Also can I create this with a ActiveX control button? I would like to have a button that I can click at the end of my work which will run the Macro in sheet 1.
View 6 Replies
View Related
