I'm trying to copy an ELOOKUP formula down a column in a sheet. The formula is losing part of the table array when I carry it down and returning an N/A error. Interestingly, it will work when I copy it across a row.
View 9 Replies
I'm building a master data spreadsheet to hold all of our data for the next fiscal year. There are about 300 data elements divided by month (our fiscal year is July-June). The intention is to go in monthly and enter data. How do I create the formulas and then copy them across the rows without getting the #VALUE! error or #DIV/0! error since I don't have data in the columns yet? Ideally, I'd like the formulas to live in the background and have the cells blank until I enter data for the particular month.
If it matters all my formulas are something similar to =IF(B4 = " ", " ", B4) or =IF(B4 = " ", " ", B4/B5)
I have a spreadsheet with about six sheets.
On sheet one: I am entering data.
On sheet two: I am running the following macro: The macro is copying formula from row 6 to the a row number specified in cell A5......
This macro keeps returning and error. It does it on all pages, except one. It works perfect on one page. This is a snip of the macro. if more info is needed. Let me knowMacro error.PNG It is supposed to Auto fit will filling in cells.
View 10 Replies View RelatedI have the following code that opens a series of workbooks on a given day, However, if one of the workbooks has been renamed or is missing the code gives a "400" error and stops, is there a way of having the code retry the next workbook if it comes to an error?
View 2 Replies View RelatedI am getting a compile error, the "+" sign is highlighted and the error is named argument already specified, if I remove the "+ vbExclamation", I receive the same error.
What I want to do is if the appropriate sheet is not active, the response will force the sub to end sub, if the proper book is active workbook, then continue on.
Dim Ans As String
Set oWss = ActiveSheet
Set oWsSNBD = Workbooks("TGSProductsAttrib.xls").Worksheets
Ans = MsgBox("Make Sure the ""TGSItemRecordCreator Workbook"" is the Active Workbook", _
"Correct Workbook?", Buttons:=vbYesNo + vbExclamation)
If Ans = vbNo Then
MsgBox """Select the TGSItemRecordCreator Workbook"" & Re-Run Code."
End
End If
I have come up with the following array UDF to help me split a large list of values into list of smaller groups.
The function takes the 3rd input argument to to understand how many smaller lists it needs to split the bigger range.
The 2nd argument simply specifies a seperator, either "," or ";"
On using the same on a worksheet I'm getting a #VALUE! error and for the life of me am not able to pinpoint the problem area.
Public Function CBOList(Rng As Range, App As String, OutRng As Range) As Variant
Dim Func As WorksheetFunction, UniqueVals As New Collection
Dim cnt, who
Dim ctr As Long, lst As String
Dim myarr() As Variant
Set Func = Application.WorksheetFunction
CBOList = ""
Application.Volatile...........................
I have a function that works out which is the last column containing data on a worksheet, but for some reason it is alwys retuning 0.
View 14 Replies View RelatedI'm developing an excel addin using Visual Studio 2008. At the moment i'm trying to display a popup showing the value contained in cell A1. However, i'm getting a runtime error saying that xlWorkBook is null. I've been able to get this to work if i open a workbook but i want to be able to execute my code on the currently active workbook. I thought that ActiveWorkbook (also tried ThisWorkbook) would let me do this but i'm having no success.
using Excel = Microsoft.Office.Interop.Excel;
using Office = Microsoft.Office.Core;
...
...
Excel.Application xlApp;
Excel.Workbook xlWorkBook;
Excel.Worksheet xlWorkSheet;
xlApp = new Excel.ApplicationClass();
xlWorkBook = (Excel.Workbook) xlApp.ActiveWorkbook;
xlWorkSheet = (Excel.Worksheet) xlWorkBook.Worksheets.get_Item(1);
MessageBox.Show(xlWorkSheet.get_Range("A1", "A1").Value2.ToString());
I have a userform that finds any instance of the user inputted search and tells you which sheet its in and allows u link to them. I also have a number of text boxes that I want populated with the information found on only the activesheet, not both. Currently I get a type mismatch error, and whilst it populates the information in debug mode I also get a Error 2042 on the following
TextBox5.Text = Cells(rngFind.Row, 2)
Option Explicit
Sub locate(Name As String, Data As Range)
Dim rngFind As Range
Dim strFirstFind As String
Dim Find As String
With Data
Set rngFind = ActiveWorkbook.Sheets(1).Cells.Find(Name, LookIn:=xlValues, LookAt:=xlPart)
If Not rngFind Is Nothing Then
strFirstFind = rngFind.Address
Do
If rngFind.Row > 1 Then
ListBox1.AddItem rngFind.Value.....................
I am trying to read Formula1 from the the Validation object. If the cell does not contain a Formula1 - I get on object error.
In:
http://www.ozgrid.com/forum/showthread.php?p=95521
Derk suggested "That error occurs when the activecell has no validation. Some of the properties return as "codes" so you will need to figure out what say -1 means for alertstyle." I do not know how to test for this.
My problem is that I am getting the N/A error in cell M3 if L3 is empty. I would like the forumla to 'ignore' cell L3 if it is empty. I do not want a zero put in there. I have looked up information on ISBLANK function but the more I read the more confused I am getting
View 6 Replies View RelatedA client has a registration workbook for each student which contains 3 types of worksheets, A) Transcript B) Registration and C) Grade sheets. Each file has only 1 Transcript sheet and 1 to many pairs of Registration and Grade sheets.
I have a GPA user defined function which obviously can only be used on a Grade sheet. I would like to return an Error if the user trys to use the udf on a non Grade sheet.
Currently I am just returning 1/0 but the smart tag returns #Name. Can I control the text displayed somehow?
What is causing this to error. Basically I'm just trying to highlight cells, and create a pivot table out of that. Here's my Code:
Sub Macro1()
'
' Macro1 Macro
Dim myRange As String
myRange = "Sheet1" & Selection.Address
Sheets.Add
[Code] ..........
When I debug, the value of myRange is something like Sheet1$A$19:$K$37 with the actual cell values being whatever I highlighted. I get a Runtime Error 5 Invalid procedure call or argument. I'm assuming it's something with my sourcedata variable, but I'm not sure what.
Also, I did try commenting out the Sheet.Add and Sheets("Sheet2").Select Cells(3, 1).Select lines, but it still produced the same results.
For some reason get a type mismatch error on when I try to determine the rth member of summation range. I have highlighted the relevant part of the code in bold. It is strange as I can obtain the address.
If ((All_nurse_names(r, 1) = nurse_name) And (All_status(r, 1) = status)) Then
Debug.Print "test " & r & " " & summation_range(r).Address & " " & val(summation_range(r))
total_hours_in_shift = total_hours_in_shift + (summation_range(r))
End If
I am, and have been using several sum- and count-ifs formulas for a time, but when the new year rolled around, decided to improve some of the sheet.
That all being said, the issue started after this. A specific set of my count and sum if functions started returning error values.
I analysed them, they seemed fine, and then selected them and hit enter. Problem over in that cell, as suddenly the correct value is returned.
But that's just it, I know the formulas are correct and working, as, if I select and hit enter on them individually, they return the right value. However, every time I close the sheet and re-open, all the values are showing error again.
I am perplexed. Did I inadvertently change a setting somewhere when I rebuilt the worksheet that is preventing the formulas from resolving correctly? As, like I said before, the formulas are fine, the data they are resolving, is fine. Just does not seem to calculate when I open the sheet.
I'm trying to write a macro that will insert a excel formula into a specific cell. When I try to run the macro I receive a compile/ syntax error. I don't understand why as the formula works in excel. Here is the code (formula only)
View 4 Replies View Related1) The following code works well except for 1 wierd circumstance. This UDF code resides in a Cell in workbook 'A'. If I have another workbook open (call it workbook 'B'), and I do ANYTHING in workbook 'B' (like copy a cell to another cell within workbook 'B', or perform a calculation within workbook 'B', or even copy a cell from 'A' to 'B'), then the cell that this UDF resides in (workboook 'A') will change from a good number to a #VALUE error. If I work ONLY within 'A', then this UDF functions properly (giving a good result).
2) If I hit the F9 button (i.e. re-calc), with workbook 'A' active, then the #VALUE goes away, and the good number comes back. To clarify, all workbooks have AUTO CALC enabled. I guess the 'Application.Volatile' line causes this code to run when I hit the F9 button (thereby clearing the #VALUE error). If I hit F9 with 'B' active, then the #VALUE error (back in 'A') goes NOT clear.
3) NOTE #1: If I put a BREAKPOINT inside this code, and then repeat a "copy from cell to cell" within workbook 'B', I find that the following code DOES NOT execute, as it does NOT "stop" the code at the BREAKPOINT line. But, when I hit F9, then it DOES stop at the BREAKPOINT.
4) NOTE #2: If I "comment out" the Application.Volatile line, it still does the SAME thing. Except worse, then when I hit F9, it doesn't correct the #VALUE error. I really need the Application.Volatile step with this code, as these functions will not automatically update if their referenced cells are changed.
5) NOTE #3: The variables Row_Num & Column_Num are declared at the Module Level. If I use unique variables and declare these at the Procedure Level, it makes NO difference. I also tried putting a "DoEvents" line after Application.Volatile, but NO difference.
6) It seems I need this code to execute whenever there is a "change" on ANY workbook. Or else, do something to keep these cell values from changing anytime there is "action" on another workbook. Or, is there better code to do the samething? ... Do you have any CLUE how to fix this SNAG?
I have a number of Vlookups in sheet1 book A (originally created by someone else). When I use Move or Copy to copy sheet1 to workbook B all the vlookups show as =#N/A. Guess this is a setting somewhere?
View 7 Replies View RelatedI have created a daily operating room schedule in which each time slot has a drop down box for the Doctor doing the procedure and the Group of doctors from which he/she came.
It is a yearly schedule with each day of each month duplicated on a tab for that month - the same daily schedule for each.
I have been able to duplicate each day right up until the 25th of the month in which I attempt to save the spreadsheet and am given an error stating it can not save some of the data, though the data appears to be intact (the validation drop down lists)
Upon closing and reopening the spreadsheet, all of the cells that contain validation including and after the 25th of the month are simply gone.
I have attempted to attach a copy of the file but I keep encountering an error with the database.
Zip file with xls file has been added
I am using the below macro to copy the rows (Starting from Row 2 excluding header row) to another sheet (Starting from Row 2 excluding the header row). I have a huge number of rows which i need to copy to the new sheet (crossing 1.5 Lakh records) which is probably causing "Out of Memory Error: 7" to occur when i execute the below code.
[Code].....
I am transferring 10000 rows from 1 workbook to another..
It takes place smoothly for the first 30000 rows, but after that on the 'select' line it gives me an overflow error.
The code that I am using is as following: .....
I have a script that creates a bunch of sheets. It was working fine when testing because I was just adding a sheet using worksheets.add, but now I've found out they all need to be created from a template sheet. I set up the template sheet and changed to the worksheets.copy method, but I'm receiving a runtime error "Object Required"
All I want to do is copy the sheet and rename it to the next name in the array (I have an array of sheet names).
Here is the code snippet in question (error line in red):
Code:
If lngX = LBound(arrSheets) Then strAfter = Sheet1.Name Else strAfter = CStr(arrSheets(lngX - 1))
Set WS = Worksheets("TmpSht_Checks").Copy(after:=Sheets(strAfter))
WS.Name = CStr(arrSheets(lngX))
As written, the duplicate sheet IS created...
I also tried the method below, but I get the same result (sheet created (but not named) and the same object required error)
Code:
If lngX = LBound(arrSheets) Then strAfter = Sheet1.Name Else strAfter = CStr(arrSheets(lngX - 1))
Worksheets("TmpSht_Checks").Copy(after:=Sheets(strAfter)).Name = CStr(arrSheets(lngX))
worked at one point but now gives a '1004' runtime error. What I am trying to accomplish is have the user display a line of data on a userform, modify it, then write it back to another sheet in the workbook.
My ...
There is a Microsoft VBA bug currently outstanding where if your VBA replicates a sheet too many times, it throws a run-time error. I read MS' statement that, to get around this problem, what one can do is to save and close the file, and re-open the file once in a while.
Doing this certainly helped, where it used to crash after copying only a few times and now it goes on until 40 ~ 50 times. But it still crashes. Has anybody been able to get around this problem? Currently I am having VBA save, close and re-open the file every 7 or 8 times or so...
Here is my table which is just a test sample of the larger table, but in the end, it is column 1 I want to base the new ws on.
Before Macro
AY *AB1UnitCount2533210431 LGR SQ10584631 LGR SQ7726 Excel tables to the web >> Excel Jeanie HTML 4
The code below works fine through the first instance of the match and adds a new ws based on the name, but when it gets to the second match the macro tries to add the ws all over again and I get a run time error 1004 which states you can not add a ws and name it the same as one that already exist. I only have one sheet in my wb titled "AY". How can I also have the two column headers transfer to the new ws?
Public Sub CopyUnit()
Dim N As String
Dim i As Long
Dim ws As Worksheet
Set ws = Sheets("AY")
N = Worksheets("PAS Codes").Range("L14").Value
For i = Range("A65334").End(xlUp).Row To 1 Step -1
With ws
If Cells(i, 1).Value = N Then
.Rows(i).Copy
Sheets.Add.Name = N
Rows("1:1").Select
ActiveSheet.Paste
End If
End With
Next i
Application.CutCopyMode = False
End Sub
After Macro
31 LGR SQ *AB1UnitCount231 LGR SQ7331 LGR SQ10 Excel tables to the web >> Excel Jeanie HTML 4
I'm generating a runtime 1004 error with the macro I have attached to CommandButton1, "Clock_In".
The macro is copying the name, date and time from 3 cells on Sheet1 and pasting special values to another sheet.
I've been trying to use the below code,
Sub combine()
'This will copy data from all sheets of the selected workbooks
'To a sheet named 'Data' in the sheet in which the macro is run from
Dim pasterow As String
mainsheetname = ActiveWorkbook.Name
MsgBox ("Please select spreadsheets to combine")
filestoopen = Application.GetOpenFilename(MultiSelect:=True)...
The macro (used to) go down the list of spreadsheets and copy certain data from them into this master workbook. Now I'm getting a "'C:Users310108841DesktopTestFolder' could not be found" error and don't know why.
[Code].....
The error appears to happen here:
[Code] ....
What's more infuriating is that this appears to happen at random. I have been trying all afternoon to get it to work, and had no luck. I have literally just run it now, and it works fine. I can't believe it just works at random.
I am trying to develop a code which extracts the data from text files inside a folder (Folder test in my desktop) into one sheet. The Macro is in the workbook “Text Extract” which is an excel 2007 file. The data of each text should be copied to Sheet1 of this workbook one below the other. For testing purpose I have kept only one text file in the folder and was trying to copy the data from the text data extracted sheet to Cell A1 of Sheet1 of workbook “Text Extract”. The code works fine till copying the data, but shows below error in the line “Selection.Paste”:
Run time error 438: Object doesn’t support this property or method.
Below is the code:
Sub LoopThroughFiles()
Dim strFile As String
Dim strPath As String
[Code]....
