Error 2042 - Returning Row Information
Nov 25, 2009
I have a userform that finds any instance of the user inputted search and tells you which sheet its in and allows u link to them. I also have a number of text boxes that I want populated with the information found on only the activesheet, not both. Currently I get a type mismatch error, and whilst it populates the information in debug mode I also get a Error 2042 on the following
TextBox5.Text = Cells(rngFind.Row, 2)
Option Explicit
Sub locate(Name As String, Data As Range)
Dim rngFind As Range
Dim strFirstFind As String
Dim Find As String
With Data
Set rngFind = ActiveWorkbook.Sheets(1).Cells.Find(Name, LookIn:=xlValues, LookAt:=xlPart)
If Not rngFind Is Nothing Then
strFirstFind = rngFind.Address
Do
If rngFind.Row > 1 Then
ListBox1.AddItem rngFind.Value.....................
View 9 Replies
ADVERTISEMENT
Aug 8, 2009
i was trying to see or figure out if there is a way to bring over information on a row from one sheet to another. I have a sheet with dates in column A and information going across to column h.
as an example i have row 1 that has date in A1, text B1, text C1, nothing in D1 but text in E1 all in Sheet 1.
I want to see if there is a formula that will say if it is todays date then grab that row and bring over the row with the cells that have data
View 2 Replies
View Related
Jun 28, 2007
Joe Cheddar 1 2 1
Juan Valdez 1 3 2
Sam Vidal 1 1 2
Betty Juno 2 4 2
...there is only one "1" in a column. So if column 1 has three ones it doesn't return anything. Columns 2 and 3 though have only one occurance of "1." What I need returned is for column two, "Sam Vidal", and for column three, "Joe Cheddar." Column one would show "No Winner"
View 13 Replies
View Related
Feb 5, 2014
I have this data inputted into excel sheet: [URL] .......
This data is in tab called Shops, that has 8 columns of information. In another sheet called control, I have the shops names from row A in a list box. What I am trying to do is when whatever shop is selected in the list box then output the shop information from that row in 8 different cells in another sheet. I have a list of about 200 shops that I need to input.
So if we pick shop, Abc inc from the list box how can I get excel to look up the information in Abc inc in the shops tab of information and then display them on other cells in different sheets.
I have the same issue with making a list box of people names. I made the list box but I want to make it so it will display there phone number and e-mail address in 2 other cells once you pick there names. I had some luck using the if command on smaller list boxes but I can't figure out how to get multiple cells of information to come out correctly
View 1 Replies
View Related
Oct 29, 2009
I'm trying to copy an ELOOKUP formula down a column in a sheet. The formula is losing part of the table array when I carry it down and returning an N/A error. Interestingly, it will work when I copy it across a row.
View 9 Replies
View Related
Feb 9, 2007
I have a relatively simple, though large, spreadsheet. I get the following in many of my cells: The Error Checking Options button is displayed and the cell itself. is marked with a small green triangle in the upper-left corner. When I click the button, the error type is displayed, followed by the following list of error-checking options:
information specific to the error type
• Show Calculation Steps: demonstrates all steps leading to the error
• Ignore Error: allows you to accept the formula as entered, without Excel displaying the Error Checking Options smart tag
• Edit in Formula Bar: allows you to edit the formula that is generating the error in the Formula Bar
• Error Checking Options: opens the Options dialog box, where you can select the rules governing error checking
• Show Formula Auditing Toolbar: displays the Formula Auditing toolbar
When I check the formula it calculates correctly. What triggers this when there is no error, is there a way to prevent it from appearing in the worksheet?
View 2 Replies
View Related
Feb 27, 2014
This macro keeps returning and error. It does it on all pages, except one. It works perfect on one page. This is a snip of the macro. if more info is needed. Let me knowMacro error.PNG It is supposed to Auto fit will filling in cells.
View 10 Replies
View Related
Mar 9, 2009
I have the following code that opens a series of workbooks on a given day, However, if one of the workbooks has been renamed or is missing the code gives a "400" error and stops, is there a way of having the code retry the next workbook if it comes to an error?
View 2 Replies
View Related
Sep 5, 2007
I am getting a compile error, the "+" sign is highlighted and the error is named argument already specified, if I remove the "+ vbExclamation", I receive the same error.
What I want to do is if the appropriate sheet is not active, the response will force the sub to end sub, if the proper book is active workbook, then continue on.
Dim Ans As String
Set oWss = ActiveSheet
Set oWsSNBD = Workbooks("TGSProductsAttrib.xls").Worksheets
Ans = MsgBox("Make Sure the ""TGSItemRecordCreator Workbook"" is the Active Workbook", _
"Correct Workbook?", Buttons:=vbYesNo + vbExclamation)
If Ans = vbNo Then
MsgBox """Select the TGSItemRecordCreator Workbook"" & Re-Run Code."
End
End If
View 9 Replies
View Related
Mar 23, 2008
I have come up with the following array UDF to help me split a large list of values into list of smaller groups.
The function takes the 3rd input argument to to understand how many smaller lists it needs to split the bigger range.
The 2nd argument simply specifies a seperator, either "," or ";"
On using the same on a worksheet I'm getting a #VALUE! error and for the life of me am not able to pinpoint the problem area.
Public Function CBOList(Rng As Range, App As String, OutRng As Range) As Variant
Dim Func As WorksheetFunction, UniqueVals As New Collection
Dim cnt, who
Dim ctr As Long, lst As String
Dim myarr() As Variant
Set Func = Application.WorksheetFunction
CBOList = ""
Application.Volatile...........................
View 9 Replies
View Related
Jun 15, 2009
I have a function that works out which is the last column containing data on a worksheet, but for some reason it is alwys retuning 0.
View 14 Replies
View Related
May 17, 2009
I'm developing an excel addin using Visual Studio 2008. At the moment i'm trying to display a popup showing the value contained in cell A1. However, i'm getting a runtime error saying that xlWorkBook is null. I've been able to get this to work if i open a workbook but i want to be able to execute my code on the currently active workbook. I thought that ActiveWorkbook (also tried ThisWorkbook) would let me do this but i'm having no success.
using Excel = Microsoft.Office.Interop.Excel;
using Office = Microsoft.Office.Core;
...
...
Excel.Application xlApp;
Excel.Workbook xlWorkBook;
Excel.Worksheet xlWorkSheet;
xlApp = new Excel.ApplicationClass();
xlWorkBook = (Excel.Workbook) xlApp.ActiveWorkbook;
xlWorkSheet = (Excel.Worksheet) xlWorkBook.Worksheets.get_Item(1);
MessageBox.Show(xlWorkSheet.get_Range("A1", "A1").Value2.ToString());
View 9 Replies
View Related
Apr 14, 2007
I am trying to read Formula1 from the the Validation object. If the cell does not contain a Formula1 - I get on object error.
In:
http://www.ozgrid.com/forum/showthread.php?p=95521
Derk suggested "That error occurs when the activecell has no validation. Some of the properties return as "codes" so you will need to figure out what say -1 means for alertstyle." I do not know how to test for this.
View 5 Replies
View Related
Apr 27, 2007
My problem is that I am getting the N/A error in cell M3 if L3 is empty. I would like the forumla to 'ignore' cell L3 if it is empty. I do not want a zero put in there. I have looked up information on ISBLANK function but the more I read the more confused I am getting
View 6 Replies
View Related
Feb 7, 2007
A client has a registration workbook for each student which contains 3 types of worksheets, A) Transcript B) Registration and C) Grade sheets. Each file has only 1 Transcript sheet and 1 to many pairs of Registration and Grade sheets.
I have a GPA user defined function which obviously can only be used on a Grade sheet. I would like to return an Error if the user trys to use the udf on a non Grade sheet.
Currently I am just returning 1/0 but the smart tag returns #Name. Can I control the text displayed somehow?
View 9 Replies
View Related
Jan 25, 2013
What is causing this to error. Basically I'm just trying to highlight cells, and create a pivot table out of that. Here's my Code:
Sub Macro1()
'
' Macro1 Macro
Dim myRange As String
myRange = "Sheet1" & Selection.Address
Sheets.Add
[Code] ..........
When I debug, the value of myRange is something like Sheet1$A$19:$K$37 with the actual cell values being whatever I highlighted. I get a Runtime Error 5 Invalid procedure call or argument. I'm assuming it's something with my sourcedata variable, but I'm not sure what.
Also, I did try commenting out the Sheet.Add and Sheets("Sheet2").Select Cells(3, 1).Select lines, but it still produced the same results.
View 9 Replies
View Related
Dec 31, 2009
For some reason get a type mismatch error on when I try to determine the rth member of summation range. I have highlighted the relevant part of the code in bold. It is strange as I can obtain the address.
If ((All_nurse_names(r, 1) = nurse_name) And (All_status(r, 1) = status)) Then
Debug.Print "test " & r & " " & summation_range(r).Address & " " & val(summation_range(r))
total_hours_in_shift = total_hours_in_shift + (summation_range(r))
End If
View 9 Replies
View Related
Feb 20, 2014
I am, and have been using several sum- and count-ifs formulas for a time, but when the new year rolled around, decided to improve some of the sheet.
That all being said, the issue started after this. A specific set of my count and sum if functions started returning error values.
I analysed them, they seemed fine, and then selected them and hit enter. Problem over in that cell, as suddenly the correct value is returned.
But that's just it, I know the formulas are correct and working, as, if I select and hit enter on them individually, they return the right value. However, every time I close the sheet and re-open, all the values are showing error again.
I am perplexed. Did I inadvertently change a setting somewhere when I rebuilt the worksheet that is preventing the formulas from resolving correctly? As, like I said before, the formulas are fine, the data they are resolving, is fine. Just does not seem to calculate when I open the sheet.
View 2 Replies
View Related
Nov 30, 2007
I am trying to use a match function in VBA to return a value when a number of values in a row match a certain criteria (I have tried the Find approach on the Ozgrid help pages but it is not what I am after). My problem using a match function of course is that when there is no match the code returns a type mismatch error. I have tried to circumvent the error problem using an "On error resume next" but this then delivers a match for all rows. Anyone have any thoughts about how I can get around this problem?
Sub DataSum()
Dim strData As String
Dim i As Integer
i = 0
Sheets("Sheet1").Activate
Range("B4", Range("B4").End(xlDown).Offset(0, 0)).Select
For Each cell In Selection
If cell.Value = 0 Then
i = i + 1
Else
strData = Sheets("Sheet1").Range("$B$4").Offset(i, 0)...........................
View 8 Replies
View Related
Dec 30, 2008
I am using GETPIVOTDATA function with an incomplete pivot table. The pivot table will eventually be complete but in the mean time i need the cells that are returning the #REF! error to actually display "0". Any way I can do this?
View 3 Replies
View Related
Feb 11, 2010
I have created a userform that allows input of information and then deposits the information on a specific sheet. I am looking for a way to have that information not only deposited on the specific sheet it is already set to but also to another sheet based on a selection made from a combo box.
here is my current
View 5 Replies
View Related
Jan 23, 2007
TotHCInv.Value = WorksheetFunction. Sum(KRInv, PBLInv, CRInv, PVInv)
If i >= 34 Then CPSCtphRMA.Value = WorksheetFunction.Average("G" & (i - 30) & ":G" & i)
The first line runs properly, but the second line bugs out with the error message "Unable to get the Average property of the WorksheetFunction class". I can simply do the math, but I thought that using the worksheet function would be easier than summing and dividing. I'm curious, though, as to why I can't seem to use the Average function.
View 3 Replies
View Related
Apr 6, 2013
Basically I am trying to create a worksheet in which everytime I input information into Sheet 1, it is copied into Sheet 2. I want to have each entry in succession on Sheet 2 such that my first entry would be on Row 2, second on Row 3, third on Row 4, etc. However, everytime I put something new in Sheet 1, it just overrides the information in Sheet 2.
Basically I type in ticket sales in sheet 1, it calculates the prices and keeps a transaction log in sheet 2. But everytime I do a new ticket sale, it just overwrites the previous transaction witht he new transaction information. I've pasted my VBA below:
Sheet 1 VBA:
Code:
Option Explicit
'Form level variables - used in more than one event
Dim intAdult As Integer
Dim intStudentSenior As Integer
Dim intBalcony As Integer
Dim intChild As Integer
Dim sngAmountDue As Single
[Code] .......
Sheet 2 code:
Private Sub cmdSummary_Click()
'Declare Variables
Dim intCount As Integer
Dim i As Integer
Dim intAdult As Integer
Dim intStudentSenior As Integer
[Code] ......
View 3 Replies
View Related
Jan 27, 2014
Imagine I have 2 columns of information that look like this:
Column A
Column B
AS
Dog
AS
Cat
AS
Hamster
FT
Fish
These are my key columns. The letters are initials of people and the animals are the pets they're responsible for.
Now, I have 3 more columns that look like this:
Column D
Column E
Column F
These columns can go on for hundreds of rows.
What I want to do is pull out the information from columns D, E and F where the initials and pet match those in the key list, then paste that elsewhere (say to columns J, K and L).
So, for instance, the first entry would be copied across because, according to the key list, AS is responsible for a Dog, but the bottom entry for AS wouldn't because he was looking after a fish, and that pet isn't listed as one of his animals in the key list (Fish is listed alongside FT). Likewise, the entry for AH wouldn't come across because AH doesn't appear on the key list at all.
View 1 Replies
View Related
May 29, 2014
Error Check Marco.xlsm
see attached example. I am trying to write an error detection routine that iterates through worksheets that have numeric values for names (ignore text names or alphanumeric). Macro checks range on each numeric worksheet E3:E33 and is supposed to report back on the SummarySheet if any value other than 1 or 0 is found in range E3:E33 on any numeric-name worksheet. Code as follows:
[Code] ....
Problem is that it just reports EVERY worksheet as having an error when clearly most don't (none do I think in the attached example).
Try changing some of ranges E3:E33 to values other than 1 or 0, it still reports all sheets. Why the macro does not evaluate the range E3:E33 properly and just reports every worksheet as having an error?
View 8 Replies
View Related
Nov 9, 2009
See the attached sheet. I am trying to add together two figs which are linked to calculations which have formula built in to stop error messages when there is a 0 / 0 = #value type error. However when these two cells are added, if the cells are blank I get an error message. And if only one cell has a value, I get "" with my existing formula. what I need to do to get a result of 7 if for example cell A4 = "" + B4 =7. At the moment my formula shows "" in the sum total of these cells
View 5 Replies
View Related
Apr 1, 2013
OK, so I have a userform with some text boxes that I have specially formatted to accept only date values in the form of mm/dd/yy. By default they are blank. I have a check in one of my codes that looks like this
Code:
If DateBox vbNullString And DateValue(DateBox) > checkdate Then
M1 = "NEOPRENE" & Chr(13)
Else
M1 = "" & Chr(13)
End If
Where DateBox is this specially formatted TextBox and checkdate is a future date being checked against.So if DateBox has a value in it AND that value is greater than the date being checked against the returend string is Neoprene, otherwise it is blank.
Well the problem I have is when the first condition returns FALSE, i.e. when DateBox is empty, the DateValue half still gets evaluated and returns a type missmatch error or something like that because DateValue("") returns an error. I have line of code 8 times, one for Neoprene, squeegee, etc. So the name of the text boxes are each unique and I am using M1, M2, M3, etc.
For other reasons, use of "On Error Resume Next" doesn't work for this situation because it causes a result opposite to what I want to happen.
View 2 Replies
View Related
Jul 2, 2006
the if stattement works perfectly and does exactly what i want except when it comes to the else part. if there is no error the statements are run perfectly but if there is an error (in this case the error is generated when a match cannot be found in the spreadsheet) the else statement doesnt kick in and post the msgbox.
the code just crashes. and returns an error 1004 on the line i have highlighted in yellow
res = WorksheetFunction.Match(invvar, Columns(1), 0)
If Not IsError(res) Then
Me.txtClientID.Value = ws13. Cells(res, 7)
Me.txtNumber.Value = ws13.Cells(res, 7)
Me.txtDate.Value = ws13.Cells(res, 8)
'save client id as a variable
'Print to invoice------------------------------------------------------------------.....................
View 6 Replies
View Related
Feb 7, 2007
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6()
Cells.Select
selection.Copy
selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
For which I get 'Compile Error - Expected Function or Variable'
View 6 Replies
View Related
Apr 26, 2006
I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR:
NAMED ARGUMENT NOT FOUND
Sub HPVAL()
Dim r As Range, myStr As String
myStr = "HP"
Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
If Not r Is Nothing Then
r = r.Value
While Not r Is Nothing
Set r = Cells.FindNext(r)
If Not r Is Nothing Then
r = r.Value
End If
Wend
End If
End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
View 2 Replies
View Related