Specific Set Of Count And Sum If Functions Started Returning Error Values?
Feb 20, 2014
I am, and have been using several sum- and count-ifs formulas for a time, but when the new year rolled around, decided to improve some of the sheet.
That all being said, the issue started after this. A specific set of my count and sum if functions started returning error values.
I analysed them, they seemed fine, and then selected them and hit enter. Problem over in that cell, as suddenly the correct value is returned.
But that's just it, I know the formulas are correct and working, as, if I select and hit enter on them individually, they return the right value. However, every time I close the sheet and re-open, all the values are showing error again.
I am perplexed. Did I inadvertently change a setting somewhere when I rebuilt the worksheet that is preventing the formulas from resolving correctly? As, like I said before, the formulas are fine, the data they are resolving, is fine. Just does not seem to calculate when I open the sheet.
I am using the formula: LOOKUP(A1,{"S","M","L","XL"},{"S","M","L","XL"}) on a cell containing: EF-2147.(S) so that it will return a S [or M, L etc. if it were .(M),.(L)] but it just keeps returning #N/A. I tried putting in "(S)" etc. in the lookup formula but it then started returning the wrong letters.
I have a spreadsheet which is linked to several other worksheets. I have managed to include formulas to count how many cells have numbers between 101 and 5000 by using this formula -
=sum((h2:h500>=101)*(h2:h500<=5000))
but now I want to count the number of cells in another worksheet that are equal to or less than zero. When I use the same formula as above it counts all the blank cells. I have tried using a countblank formula and then deducting this from the result, but unless the other worksheet is open the countblank formula does not work.
I have an array that I'm using - and it works perfectly: =SUM(If((FREQUENCY(If(LEN(B10:B100)>0,MATCH(B10:B100,B10:B100,0),""),If(LEN(B10:B100)>0,MATCH(B10:B100,B10:B100,0),""))>0),1))
Now, what I would like to do, is see how many of these unique numbers relate to another number in column D See attachment.
Having a large spreadsheet with Columns A to F filled with data.
I'm trying to create a formula that's count the unique value "Order no." (Coloumn F) but only the ones between certain Departments Column(H) a certain "Error type" in Column(J).
A Criteria B A Criteria C Criteria A C Criteria C D Criteria 1 2 Criteria 3
Criteria 2 3 Criteria
I need a formula that will count the number of unique values in column A that have "Criteria" in column B. In this case the desired output would be 5 (A, C, D, 2, and 3), a blank cell in column A does not need to be counted.
I need to count the amount of Unique codes in column A BUT ONLY if they are still OPEN status. Hopefully the attached example will be explaination enough (I want to automate the RED figure...
I have a yearly running log (attached). At the bottom in cell [B88] I would like to develop a formula that gives me the number of times I ran in that specific month. Dates are in Column A and running distances are in Column B. If a distance is zero, I don't want to count it. I have attempted to solve this using the =COUNTIFS formula, but I am not able to structure it properly. Maybe =COUNTIFS is not what I should be using.
I am in desperate need of a function that will count a column of data where there are blanks and values based on a certain date that will also capture any data that is added after refreshing the table from Access. I have tried several functions but this is what I have: =(ROWS('TouchBack Detail'!$Q:$Q)*COLUMNS('TouchBack Detail'!$Q:$Q))+(COUNTIFS('TouchBack Detail'!$B:$B,'Nov TouchBack Summary'!B$1)). The result should be 3 but it’s including all other cells in the column that are not and should not be included in the refreshed table’s data (Table_TouchBack.accdb). I have attached the spreadsheet for review. The function is in cell B27 highlighted in yellow.
More specifically, i want to count how many times a dozen lates to come.
The range from 1-12 is 1st dozen, from 13-24 is the 2nd and 25-36 is the 3rd.
I want to count among these numbers, how many times one of three dozens appear every 1 time, how many times appears every 2 times, .... until 20 times.
For example: I have put in a column 500 numbers from 0 to 36.
The output must be like this:
1st Dozen: Every 1 time: x Every 2 times: n Every 20 times: m
I'm trying to copy an ELOOKUP formula down a column in a sheet. The formula is losing part of the table array when I carry it down and returning an N/A error. Interestingly, it will work when I copy it across a row.
I have a block of data spread across 5 columns (A-E)
Data in column A is unique to each row . Data in Column B is a name (text) that repeats occasionally, C, D, & E are numbers.
I would like some formula or macro that will detect duplicates in column B and sum the corresponding data (in columns C,D,E). I am not sure how to work the sumif function (assuming that is what will work in this case).
Now the tricky part is that I want the count of how many times names in column B occured to appear in column F.
Basically I would a new block of data with B,C,D,E and F as an output.
If I click on the cell to review this, it vanishes once I click out and still works. If, however, I click in the cell to edit it and then hit "Enter" the formula stays visible and refuses to work!
I've then tried it on other places where I have a formula on the same worksheet and the same thing happens.... And yet on other columns, it doesn't.
I've long wondered what's the difference between these two formulae - COUNT() & COUNTA(). Even if I apply COUNT() function on a range of cells with intermittent blanks, it still returns the count of the values in the range. How different is this from the COUNTA() function?
I have the following data. i need to count 5 times "N-TRX1" IN column "D". and returns me input "true/false". but the catch is that i need then to overlook this 5 times and start to count again from the same column without deleting the old data. Can i do it?
I need a way to find a value in a column which has one or more corresponding values in an adjacent column. Then take all of the corresponding values found and count all occurrences of the found values in another column. But I only want to count the entries if an adjacent column is not blank.
Not the easiest thing to describe. Starting to wonder if I need to think in reverse. I hope the attached example makes more sense.
Essentially what I'm trying to accomplish is import a file from Quickbooks and determine whether it was a Credit Card, Check or Invoice based on the account number.
For example:
45-12345 should return the value CC in an adjacent cell because it contains the "-" character. I0123456 should return the value INV in an adjacent cell because it contains the "I" character. 01234567 should return the value ACH in an adjacent cell because it doesn't contain either character.
I tried using VLookup, but I can't figure out how to write a formula for when it just contains a character, only if it matches it or is text/number.
This macro keeps returning and error. It does it on all pages, except one. It works perfect on one page. This is a snip of the macro. if more info is needed. Let me knowMacro error.PNG It is supposed to Auto fit will filling in cells.
I have the following code that opens a series of workbooks on a given day, However, if one of the workbooks has been renamed or is missing the code gives a "400" error and stops, is there a way of having the code retry the next workbook if it comes to an error?
I am getting a compile error, the "+" sign is highlighted and the error is named argument already specified, if I remove the "+ vbExclamation", I receive the same error.
What I want to do is if the appropriate sheet is not active, the response will force the sub to end sub, if the proper book is active workbook, then continue on.
Dim Ans As String
Set oWss = ActiveSheet Set oWsSNBD = Workbooks("TGSProductsAttrib.xls").Worksheets
Ans = MsgBox("Make Sure the ""TGSItemRecordCreator Workbook"" is the Active Workbook", _ "Correct Workbook?", Buttons:=vbYesNo + vbExclamation) If Ans = vbNo Then MsgBox """Select the TGSItemRecordCreator Workbook"" & Re-Run Code." End End If
I have come up with the following array UDF to help me split a large list of values into list of smaller groups.
The function takes the 3rd input argument to to understand how many smaller lists it needs to split the bigger range. The 2nd argument simply specifies a seperator, either "," or ";"
On using the same on a worksheet I'm getting a #VALUE! error and for the life of me am not able to pinpoint the problem area.
Public Function CBOList(Rng As Range, App As String, OutRng As Range) As Variant
Dim Func As WorksheetFunction, UniqueVals As New Collection Dim cnt, who Dim ctr As Long, lst As String Dim myarr() As Variant
I'm developing an excel addin using Visual Studio 2008. At the moment i'm trying to display a popup showing the value contained in cell A1. However, i'm getting a runtime error saying that xlWorkBook is null. I've been able to get this to work if i open a workbook but i want to be able to execute my code on the currently active workbook. I thought that ActiveWorkbook (also tried ThisWorkbook) would let me do this but i'm having no success.
using Excel = Microsoft.Office.Interop.Excel; using Office = Microsoft.Office.Core; ... ... Excel.Application xlApp; Excel.Workbook xlWorkBook; Excel.Worksheet xlWorkSheet;
I have a userform that finds any instance of the user inputted search and tells you which sheet its in and allows u link to them. I also have a number of text boxes that I want populated with the information found on only the activesheet, not both. Currently I get a type mismatch error, and whilst it populates the information in debug mode I also get a Error 2042 on the following TextBox5.Text = Cells(rngFind.Row, 2)
Option Explicit Sub locate(Name As String, Data As Range) Dim rngFind As Range Dim strFirstFind As String Dim Find As String With Data Set rngFind = ActiveWorkbook.Sheets(1).Cells.Find(Name, LookIn:=xlValues, LookAt:=xlPart) If Not rngFind Is Nothing Then strFirstFind = rngFind.Address
Do If rngFind.Row > 1 Then ListBox1.AddItem rngFind.Value.....................
Derk suggested "That error occurs when the activecell has no validation. Some of the properties return as "codes" so you will need to figure out what say -1 means for alertstyle." I do not know how to test for this.
My problem is that I am getting the N/A error in cell M3 if L3 is empty. I would like the forumla to 'ignore' cell L3 if it is empty. I do not want a zero put in there. I have looked up information on ISBLANK function but the more I read the more confused I am getting
