I'm using Excel 2003
Cell D7 - data validation reads as such: It is a List and the source is I6:I7. I have In-Cell dropdown selected. Ignore Blank is not checked.
I now password protect the sheet and only D7 is unlocked. real simple, the person using it can only use D7 and select one of two in the drop down menu.
The problem is, if the user clicks on D7 and hits delete, the cell goes blank. How can I avoid this?
I have a userform that has a combobox in it that also has an OK button and a Cancel Button. Need getting the combobox to pull in the correct list? The data for this list will be in cells A2 through A16. But not all 15 lines will always have data in them so I'd like to only show the ones with data. Then next issue i have is I would like the OK button on this userform to actually erase the data the user has clikced on in the combobox. It's a list of kids that the userform is asking which one needs to be deleted. So it might be the kid in cell A9. so when the user clicks on that kid in the combobox form a9 and hits ok I'd like to have all the kids below A9 move up one row.
Windows XP
excel 2003
I have a bit of code that calls a formatting sub depending on which cell is modified. It is triggered by the Worksheet_Change event, determines which cell is modified, and either calls the formatting sub or doesn't based on the location of the modified cell.
Some of the columns in the sheet have data validation with drop downs. If I select a value from the drop down, it doesn't trigger the Worksheet_Change. If I type a value into the same cell, it does.
This was apparently an issue in Excel '97, but supposedly fixed in '03?
I'm looking to simply delete certain words that are in cells, without having to delete rows, columns or the entire cell. I can use 'find and replace' and replace the particular word with a space, but I really want to delete the word. I'm using both Excel 2003 and 2000.
View 4 Replies View RelatedI have a spreadsheet, but it came from another file using the detach sheet method. It has therefore taken with it, all the named ranges that are now superfluous.
It seems a bit long-winded to delete these named ranges one by one manually. Would there be an easy to understand script that would delete them all, so I can start with a "clean sheet".
I'm using Excel 2003.
a VBA problem I have and I do not know how to solve. I use Excel 2003.
I have a workbook with a table; all cells except the table area are locked so at users cannot add any data. The table is on D2: H?. The workbook is password protected (users can only "Select unlocked cells", "Format cells" and "Sort"), and for that reason there is a "Add Rows" macro button so they can add more rows if necessary. It works well.
There is also a "Delete Rows" button, but it does not work as I want it to do. If the table is for example on D2:H4, and I select a cell on row #3 (ex. D3, or E3, or H3) and click on the button it deletes row #3, if I click on the button again it deletes row #4, and if I click on the button again it also deletes row #5 and so on, but it should not do it because all rows below row #4 are locked and should not be deleted.
I found on the Internet a code that I modified, but I do not get it to work. Below are the two macros.
My original macro (it deletes even locked rows):
Sub DeleteRows()
'
ActiveSheet.Unprotect Password:="123"
'
Selection.EntireRow.Delete
'
ActiveSheet.Protect Password:="123", DrawingObjects:=True, Contents:=True, Scenarios:=True _
, AllowFormattingCells:=True, AllowSorting:=True
End Sub
The macro found and modified (the original rows are commented):
Sub DelRows_2()
Dim rngDelete As Range
Do While rngDelete Is Nothing
On Error Resume Next
[Code]....
Excel 2003 - delete duplicates based on value in one coloumn.
very simple but how!i want the whole row deleted where there are duplicates in one column but ONLY the duplicates, so, if they're 3 duplicates in the column i want 2 deleted leaving 1 unique record.
Is it possible to disable Import Data Dialog box in Excel 2010? I have a web query file. I want to copy its content and paste in a new worksheet under an existing workbook. I have a macro which does that but I get Import Data dialog box when I tried to paste the copied content from test.iqy file to new sheet. The dialog box has
Select how you want to view this data in your workbook?
By default Table is selected, which is fine.
Where do you want to put the data?
By default New workbook is selected. I want to have Existing worksheet selected by default.
Is there a way to set these requirements into vba code and make this dialog box not appear at all?
Is there a way to disable all error pop up messages from coming up due to an invalid entry in a cell that has data validation? So when a user types in a value, it doesn't pop up saying "retry, cancel, etc"? Just to save time and make it more user friendly, it would be nice to just dis-allow the entry, so when someone types an incorrect entry it just erases it or stays on the cell and keeps it highlighted but doesn't let you click away...something like that. This would be applied to the whole workbook and is for XL07.
View 10 Replies View RelatedA list in A2 of Sheet 1 of workbook has values "Select", "Yes", "No". How can I get the functionality using VBA so that until a certain rule is met (say A1 becomes 1) selection of items in the list is disabled? (Or any selection of items in the list returns a value of select only?
View 4 Replies View RelatedI have produced an order form and one of the columns is 'availibility' with all cells in this column set to a validation list containing 'Yes,No'.
If the user selects 'no' for a particular item's availibility, i want that row of cells to disable in some way. i.e change colour to grey and become locked.
If the user selects 'yes' the row for that item will remain unlocked and will not change colour.
I would like to delete a column using data validation list. for example :
i have a data validation INPUT list in cell A1 (Part No., Supplier 1, Supplier 2, Supplier 3) the heading start from B2,C2,D2,E2,F2. If user select Supplier 1 from data validation list in cell A1, the column Supplier 1 [c2] should be deleted.
And/or also if in cell B1 have a data validation INPUT row list (Part no.) & if user select part no.,
the selected part no. row should be deleted.
I have two separate worksheets:
I'm trying to find a formula that looks at Column A on both sheets (each client is allocated a unique number) and if they match enter in column D of the referral sheet the month they were seen but only if it is a 1st contact (appt type on column D of contact sheet)
Referral
A
B
C
[Code]....
way to do the calculation using Excel 2003
I have five columns of data: A & C are time measures; B & D are values associated with each time measure; and E is a matching value column that I want to populate. I am trying to match times and place in col E the Val 2 that matches times 1 and 2. Though many matches lie on the same row, there are many that don't (the real data uses several thousand rows). For example, Val 1 in cell A5 (100) is associated with cell C7 to find a matching value of 4.5 in cell E5. Note, occasionally, there will be replicate values for Val 2 (like cells C9 & C10). I need to match the one further down the list.
Excel 2003ABCDE1Time 1Val 1Time 2Val 2Match203.902.72.73484.7482.12.14545492.33.351006543.34.562003554.472192.71004.57.782015.592196.6102197.7Sheet1
I have inherited a number of databases in work (running Office 2003). It has quickly become apparant that a vast amount of work is duplicated and so i am trying to cut down the data input and therefore the possible errors.......
I have narrowed most of the work down and now have a major worksheet (is that what you call a complete Excel file) named "master database" and several over minor files....
Currently what i am trying to do is to get one of the minor files to auto populate an area of the master database. I will try to explain it below...
1. Minor database has 2 columns with data i require to auto populate the master database. (1 column (B) is called 'off', the 2nd column (C) is called 'on').
2. A number will be inputed manually into either 'B' only or 'B and C' columns, depending on the criteria of the job..
3. The criteria of the job is dictated by column (Z) where the text 'A' or 'ATL' is inputed
4. The master database i would like to add up the numbers inputed as a total from columns 'off' and 'on' and place them into seperate columns 'E' and 'G' of the master database.
5. IF column (Z) shows 'A' then only column (B) 'off' is to be calculated and put into the master database at column (E)
6. IF column (Z) shows 'ATL' then BOTH columns (B and C) 'on' AND 'off' are to be added together and column (G) populated on the master database.....
To make mattters more complex. An expiry date is shown on the master database at columns (D) and (F).
IF column (E) does not exceed 12 by the expiry date, i would like the cell (D) to turn red
IF column (G) does not exceed 10 by the expiry date, I would like the cell (F) to turn red
I am trying to set up a spreadsheet in Excel 2003 that pulls data from a lot of different websites and formats it all for me. I have managed to do this with a few websites but there are two which I'm having problems with.
This is the table I am trying to get, but when I do a manual web query and select the table and click OK, it says that no data has been found.
[URL] ...
Data in cell A1 - 1) A Q
Data in cell A2 - 12) V
Data in cell A3 - 131) B H L
How do I throw away the #) and the following space in cells A1, A2, and A3 and save the rest?
Excel 2003. ie. no VBA.
I have Excel 2003. I am working on a problem. I have multiple sheets for various purposes of my customers with all various columns. However i require to have a master sheet which gives me the due dates customer wise in one place. i.e it selects the customer, the worksheet purpose (say upcoming event) and the due date filed from various worksheets and combines into a master sheet,sorts the same customerwise,due date wise.
Using VBA i did create a worksheet which does this but using advanced filter but however how do i do it for all worksheets?
Using macro to go individually into each worksheet and collate data into one seems very unreliable to me. Is there a solution?
I work in a call centre and I record my daily figures. My target is 82%, and I would like a bar chart in Excel 2003 to colour the chart according to wether I hit target or not. If my daily figure >=82% the bar should be green.
View 9 Replies View RelatedI have Excel 2003
My spreadsheet has multiple lines of data for multiple items (have a specific item #) and I need to be able to enter an item # on a different sheet so that the requested information can be pulled from the data source. The items have information on multiple rows. I need to have all of the rows pulled into my output file when I specify the specific item. #.
I have attached a spreadsheet showing the type of data is contained and what my desired output would look like.
So I am trying to pull data from multiple sheets. I've gone through the thread, but haven't found an answer yet (or didn't work hard enough). On Sheet1, yellow highlighted column, I am trying to look up the I.D. Code for 36 month residuals. As you can see, I have to use multiple conditions on different worksheets.
I have to use most of Sheet1 columns to find the answer. I just can't figure the formula out.
I don't have Excel 2007, only 2003 I have.
I have two Spreadsheets on Excel 2003, one provided by a service supplier (i), and one from my own system (ii).
I need a macro attached to spreadsheet ii that looks for data matches between the F column of my spreadsheet, and the C column of the suppliers. Where data matches (i.e. if cell C42 in spreadsheet ii is the same as cell F23 in spreadsheet i) it transfers the contents of the A column of spreadhseet i and places it in the corresponding cell in the C column of spreadsheet ii.
Example 1 : In spreadsheet i cell C20=BN213YD. In spreadhseet ii cell F55=BN213YD. Therefore, the macro takes the contents of cell A20 in spreadsheet i and places it in cell C55 of spreadheet ii
Example 2 : In spreadsheet i Cell C75 = TN142XS. In spreadsheet ii this data is not found. The macro therefore takes no further action.
Basically, the suppliers spreadsheet has less information per row, but more entries overall. My spreadsheet is lacking a lot of suppliers references, but has more comprehensive information elsewhere. Until now i have been doing a manual search of the postcodes between the spreadsheets and rectifying them manually, but this is taking longer and longer as the spreadsheets grow.
So essentially I need a VBA Macro code for Excel 2003 that can take raw data that is input every month via a text document and move it to the next sheet in the workbook. This data is essentially broken down by a "platform" in the raw data section ("P") with monthly totals for each month but it is broken down by platform in total which goes in descending monthly order on the "dat" tabs (which is the final place for the data).
So what needs to happen is the data for the last two years must go from the "P" tab to the "PDat" tab under the correct platform and the correct spot for the newest month. The data that is input each month is in the same format month to month, just starting two rows down from the last month.
At the end of two years, the oldest year of data must be deleted and the other data moved up to the vacant area so that the sheet never grows too large (i.e., at the end of this year 2012 will be deleted and all the data will need to get moved up).
Attached is a sample data workbook.
I have a notepad with lot of information's but when i try loading those info's to excel I am getting message "File Not loaded properly"
Is there a VB code which downloads it to excel and automatically moves to next tab and paste the rest.
I have a worksheet with data in it. The data could be in any column or row. I am looking for data which contains the numbers 01. If I find such data, I want to move all the data in that particular cell it to column A.
My code(which is not working) is below. I'm using Excel 2003.
Code:
Sub delete_oldads()
'the code to find 01
Dim cel As Range
[Code].....
Below is an extensive macro that basically writes data from a user's template to a certain data sheet (in the form of rows) depending on their "service group." There have been 3 separate instances of a user saving data and instead of adding rows onto the bottom of the entire list of data, the sheet only has their data and no headers/filters. I believe it is somehow deleting all the previously written data that was on that sheet.
I should also mention that this is a shared workbook. I specifically created separate sheets for each "service group" to eliminate the possibility of users overwriting each other's data (Perviously 60+ users were saving to the same sheet and running into conflicting changes errors. Now the max users writing to one sheet is 10-12). Since it is not occurring every time, I am not sure where the error is. Could it possibly be in the sort or delete sections in bold below?
I am using Excel 2003.
Code:
Sub SaveData_Test()
'---------------------------------------------------------------------------------------
' Procedure : SaveData_Test
' Author : Julie/Cecil
' Date : Fri, 1/13/12
' Purpose : Modified Julies code to capture date entries
' associated with hours logged per category.
' Check notes attached to "sOp" string comment
' for additional details.
[Code] ..........
I'm using Microsoft Office 365 Home Premium. Although this file is saved with Excel 97-2003 - because the computers at work only use 2003.
OK - Here is my dilemma. I've been creating a spread(work)sheet for work. One of the fields that needs to be entered by the manager doing the papwerwork is 'Date'. I currently have the Data-Validation set as follows because the paperwork being done is for the yesterday:
Code:
=TODAY()-1
I have the Error Alert set to Warning prompting the manager to ensure the date is correct (sometimes a mid-shift audit is being done, so the actual current date has to be used). Now, what I am wanting to do is to also set it that if the manager set's the date for a future date, I would like Excel to also either do a Warning or a Critical displaying a message that future dates cannot be used.
I know this may sound trivial, but with this paperwork, dates are extremely critical and vital in the event of an investigation for cash shortages etc.
I have uploaded the excel sheet to my domain, which I can provide a link to - either here or in a private message - but I do not want to do so unless I know that it's ok to do. If so, I will reply with a link to the location of the Excel file.
Objective: I have a financial spreadsheet, which i want to bring to my front sheet the sum of data in between 2 week ranges. For example, if I select week 26 and 52 then all the relevant data will be summed into the relevant cell on my front sheet.
Current Technique: I have on my "data" spreadsheet my columns in B1 down listing Week 1-52 and then the cell headings in B2 onwards. I have created a summary table which currently shows the 4 quarters of the year (1-13, etc) and I am using helper columns to pull this data onto my "front sheet", depending what selection is made on the drop down e.g. 1-13, then all summary data will be dragged onto my front sheet.
On the front sheet, in each cell I need information to be displayed I use the following formula;
"=IF(ISERROR(INDEX(Data!$C$56:$BF$60,Data!$BI56,COLUMNS('Front Sheet'!I13:J13)))"
As you can see the quarter data is useful, but a more flexible date range would be more useful to sum data between any selected week.
I have inherited a number of databases in work (running Office 2003). It has quickly become apparant that a vast amount of work is duplicated and so i am trying to cut down the data input and therefore the possible errors.......
I have narrowed most of the work down and now have a major worksheet (is that what you call a complete Excel file) named "master database" and several over minor files....
Currently what i am trying to do is to get the minor files (68 seperate files) to auto populate an area of the master database. I will try to explain it below...
1. Minor database has 2 columns with data i require to auto populate the master database. (1 column (B) is called 'off', the 2nd column (C) is called 'on').
2. A number will be inputed manually into either 'B' only or 'B and C' columns, depending on the criteria of the job..
3. The criteria of the job is dictated by column (Z) where the text 'A' or 'ATL' is inputed
4. The master database i would like to add up the numbers inputed as a total from columns 'off' and 'on' and place them into seperate columns 'E' and 'G' of the master database.
5. IF column (Z) shows 'A' then only column (B) 'off' is to be calculated and put into the master database at column (E)
6. IF column (Z) shows 'ATL' then BOTH columns (B and C) 'on' AND 'off' are to be added together and column (G) populated on the master database.....
To make matters more complex. An expiry date is shown on the master database at columns (D) and (F).
IF column (E) does not exceed 12 by the expiry date, i would like the cell (D) to turn red
IF column (G) does not exceed 10 by the expiry date, I would like the cell (F) to turn red
How do you disable or delete a button in VBA code after the button is pressed?
View 9 Replies View Related