Excel 2003 :: Lost Menu / Toolbars And Scroll Bars In All Workbooks
Nov 18, 2011
I was working on an Excel 2003 workbook with 3 worksheets. The first sheet is the 'Menu' sheet on which I placed buttons to take me to the other two sheets and back. I wanted to hide the Excel menus, toolbars, scrollbars, etc. on the 'Menu' sheet so that no user can alter that 'Menu' sheet. The 'hiding' code was not meant to affect the other two sheets.
The code worked fine. However, when I closed the workbook and tried to open a NEW workbook so that I could do some other work, I realised that the new workbook and its accompanying sheets had the menus, toolbars, scroll bars, etc. hidden. I closed the workbook and tried opening a new workbook. It was the same experience.
I called up the file with the code, deleted all the codes attached to that file, and re-saved the file. It did not solve the problem. And when I tried many more new workbooks and got the same problem, I deleted my entire Office 2003 installation and re-installed Office 2003. It still did not solve the problem.
View 9 Replies
ADVERTISEMENT
Jan 13, 2007
In the menu via TOOLS-->OPTIONS-->VIEW I am trying to remove the scroll bars from just one worksheet but when unticked, this option affects all of the worksheets in my workbook. Is there a way to just nail this selection down to one sheet via properties?
View 2 Replies
View Related
Feb 15, 2012
How does one add files/templates to excel2010 to customize scroll bars, graphic-like or clip-art type?
View 1 Replies
View Related
May 30, 2006
A IT Ordering system has been created using Excel, I am prompted to enable Macros, no problem there. The problem is that when I exit the worksheet using a formulas setup as an exit button, my Excel is displayed with my Toolbars missing. I have been unable right-click at the top and re-add these I am only presented with the option to minimise, close etc. 1. How can I replace my Toolbars? 2. Is there a formula fix so that I can use this worksheet without losing my toolbars?
View 3 Replies
View Related
Mar 6, 2009
I am trying to derive the EMI for a Loan Amount and also chart a PIE graph for the same..
Instead of Manually feeding the values such as :
Variable 1 : Loan Amount : Min : Rs 50,000/- Max :Rs 5000000/-
Each Spin (1 Unit) -Rs 25000/-
Variable 2 : Interest Rate : Min : 5% Max : 30%
Each Spin (1 Unit) -0.25%
Variable 3 : Tenure/Duration : Min : 6 months Max : 30 years
Each Spin (1 Unit) - 6 months
I want to have a Scroll-Bar where the values can change Automatically but am not aware of using the same...
Can someone please help me with a small attachment with the above variables attached to it..The values drawn should be displayed as well above the Scroll-Bar and maybe can make the Min and Max more dynamic by storing it somewhere in the Sheet..
I am looking for Non-VBA solution to do the same..
View 12 Replies
View Related
Jul 3, 2009
What I need to do is add a scroll bar to my text box in my form. I used the properties of the text box to add a scroll bar but when you preview it you can't see it. When you click somewhere inside the form it appears and is workable but not when it hasn't been clicked on. How do I make the scroll bar appear from the start. this is a vertical one ad is on a text box within the form
View 11 Replies
View Related
Jan 29, 2013
I am trying to make a spreadsheet that contains numbers in columns D to P. My end user wants to be able to adjust these with scroll bars so I could make ActiveX scroll bars under each number in each column but this would be a lot of scroll bars (one in each row and columns)!!!!
Is there are way where I have have scroll bars in column D to P that only effect the active rows and always sits below the active row?
View 7 Replies
View Related
Jul 4, 2009
I have created a form that has two textboxes on. It is used to edit existing data that is selected by a combobox on the same form.
Is there a way to force the textboxes to show scroll bars if the text exceeds the textbox height or just have them always shown?
It is difficult to distinguish on some of the data whether the data goes beyond what is visible. Without actually clicking into that textbox the scroll bars will not show.
Is this possible?
View 10 Replies
View Related
Nov 30, 2006
I have a form that is dynamically created at runtime. I have assigned the controls to a frame in VBA and also attached a horizontal scrollbar manually to that frame.
How can I control the scrollbar in VBA to appear, when columns of controls added to the frame exceeds 10. If not I want the scrollbar to be invisible?
Private Sub UserForm_Initialize()
Const cTextBoxHeight As Long = 16
Const cTextBoxWidth As Long = 40
Const cGap As Long = 10
Dim W As Integer
Dim a As Integer
View 9 Replies
View Related
Mar 2, 2008
I have some code that creates multiple new menu bars for a user which each have there own controls. I need to know which control is selected by the user for onaction. The example below is where there are up to 20 new menu bars with names Tract 1, Tract 2, etc. For each Tract, there is a controlbutton titled Absoprtion and I need to know which "Absoprtion" button was selected to run the "ViewAbsorption". I need to use th For next function because the number of menu bars could vary.
Dim objMenu As Object
Dim objViewMenu As Object
For y = x To 39
Name = "Tract" & y - 19
With Application.CommandBars("Worksheet Menu Bar").Controls
Set objMenu = .Add(Type:=msoControlPopup, temporary:=True)
objMenu.Caption = "&" & Name
End With
With Application.CommandBars("Worksheet Menu Bar").Controls(Name).Controls
Set objMenu = .Add(Type:=msoControlButton, temporary:=True)
objMenu.Caption = "&Absorption Schedule"
objMenu.OnAction = "ViewAbsorption"
Next Y
View 9 Replies
View Related
Jun 13, 2007
This is the code I use to temporarily remove menu barsfor a spreadsheet that is managed by user forms. I have code at the close of the program to replace the menu bars. The code work well although and it places a list of enabled bars in the range C1:C50 on the sheet "Bars". The range C1:C50 is not locked before the sub routine 'Hide Menus' runs. However after the sub routine 'Hide Menus' runs, the range C1:C50 is always locked and I don't understand why this is so, I would prefer it not to be.
Sub HideMenus()
Application. ScreenUpdating = False
i = 0
Worksheets("bars").Range("c1:c50").Clear
On Error Resume Next
For Each Allbars In Application. CommandBars
If Allbars.Visible = True Then
i = i + 1
With Worksheets("bars")
.Cells(i, 3) = Allbars.Name
If Allbars.Name = "Worksheet Menu Bar" Then
Allbars.Enabled = False
Else
Allbars.Visible = False
End If
End With
End If
Next
Application.DisplayFormulaBar = False
On Error Goto 0
Application.ScreenUpdating = True
Opening.Show
End Sub
View 3 Replies
View Related
Jun 13, 2008
I have a workbook that I created as an interface for my workplace. I disabled the File, Menu, Edit, etc...menu bars through .Control("x").Visible = False and .Enable = False as well
Now when I open a new workbook all the menus are there still which is good but when I open a previously saved workbook all the menus are missing. Is there a way where I can have ONLY my workbook have the menus gone and for them to appear in other workbooks that were saved?
View 3 Replies
View Related
May 8, 2014
I have never written or used a macro before and I have a simple macro task to complete:
I have Column L (L4:L10) of seven scroll bars that move according to number changes in column F (F4:F10). I want to create a form control command button that resets the changes on the scroll bars according to static column of numbers in Column E (E4:E10).
I don't know if it matters, but I'll add that I plan to add a second button that does the same thing with a different column of data. I assume I'll simply replicate whatever procedure I use in the first button - is this okay?
View 1 Replies
View Related
Nov 24, 2012
Copy over data from different workbooks and using paste special values to paste it into a new workbook using a macro. Here is what I have and what I am looking for:
My file path is
C:Documents and SettingsMy DocumentsProjectCostsDecember12
In this folder I have workbooks called:
Function1
Function2
Function3
In each workbook I have 4 worksheets
Cashable12-13
NonCashable12-13
Total12-13
GrandTotal12-13
I also have a workbook called DecMonthlyTotal in the same folder with the same named worksheets.
I am looking for a macro to be placed in the DecMonthlyTotal that will pull the data from the Cashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name Cashable12-13, it will also pull the data from the NonCashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name NonCashable12-13
Both the Cashable12-13 and the NonCashable12-13 have Columns A - G The row that the macro should start the copying from is Row 3 for each of the workbooks; however I don't have an end row for the workbooks as this will vary.
I am using Excel version 2003.
View 1 Replies
View Related
Dec 16, 2008
I have a worksheet where rows 22 through 52 are allotted for invoice information. Now, not every job is going to have 30 invoices, and I'd like to be able to hide 25 of those rows and have a scrollbar for that section of the page so that when a) user needs to enter invoice info they can scroll to an empty row, and b) when reviewing the data user can scroll through and see it all. The rows above 22 and below 50 are job info/totals and need to remain visible.
Early attempts to solve this conundrum resulted in a scroll bar that was capable only of changing the date entered for the first invoice (Date is the info in A22, which was the linked cell).
View 9 Replies
View Related
Aug 26, 2009
I have an Excel 2003 program that contains macros. One of the macros hides certain command bars and disables the worksheet menu bar. On close the opposite is true. The problem is, if a user uses the disable macros when opening then the worksheet menu bar and other command bars are still available. I would like to hide all of the data sheets and display another sheet that would normally be hidden displaying a message that the macros have to be enabled for the program to work correctly if disable macros is chosen. When the enable macros are used I would like the Error page to be hidden.
View 6 Replies
View Related
Jun 23, 2009
I've got several add-ins that I'd like the end user to install and have accessible under one menu item ("Assessments") in Excel 2003. So far, the code below successfully adds the item, but it only shows the item of one add-in. How can I get it to show all the items under the "Assessments" category?
Private Sub Workbook_Activate()
Run "AddMenus"
End Sub
Private Sub Workbook_Deactivate()
Run "DeleteMenu"
End Sub
Sub AddMenus()
Dim cMenu1 As CommandBarControl
Dim cbMainMenuBar As CommandBar
Dim iHelpMenu As Integer
Dim cbcCutomMenu As CommandBarControl
View 9 Replies
View Related
Jul 6, 2009
In the code below using msoBarTop places the menubar at the top but it seems to just place it in a new row at the right of all menus.
How or can I dock the menubar next to the last menubar?
View 7 Replies
View Related
Mar 31, 2007
In one of my workbooks, I add a menu to the toolbar with the following in the "ThisWorkbook" module:
Private Sub Workbook_Activate()
Run "AddMenus"
End Sub
It gets deleted with the following:
Private Sub Workbook_Deactivate()
Run "DeleteMenu"
End Sub............
View 9 Replies
View Related
Sep 8, 2007
I added a menu command button to a toolbar in a specific workbook. The macro is housed only in that workbook and the macro needs to run on every worksheet in the workbook. However, the button also appears on EVERY Excel workbook that I open when it should not. How can I create a menu command that only appears in the workbook that contains the macro?
View 2 Replies
View Related
Jan 12, 2013
I have been working on some files in excel for several days, saving regularly, etc. but have run into a huge problem. I was marking cells with a background color to organize and track my work, but the files being saved were .csv's.
From my research, it seems that .csv's only save data, not formatting such as cell background colors.
However, while I was working on the files, they displayed the colors correctly etc.
I am hoping that there is some sort of temporary file created by excel that would allow me to re-open my work and have the coloring appear so I can save the work as an .xlsx file with formatting.
View 1 Replies
View Related
Jan 1, 2012
In excel 2007, when I do workbook_Activate I want to hide all of the command bars. in 2003 vesion I used
.CommandBars("Worksheet Menu Bar").Enabled = False
But it is not working for me on 2007.
View 4 Replies
View Related
Feb 3, 2013
Running Windows 7, Office/Excel 2007
I have a macro which performs some conditional formatting on a worksheet. Based on the value in cells in one column, if the value meets the criteria some simple formatting is performed (row is colored, font changes for that row etc).
The macro then calls a second macro which performs the same evaluation on the same cells from the same column. If the value meets the criteria (same as previously) it is supposed to change the value of the cell by 1/2.
Both macros work, however the 2nd macro also seems to remove all of the formatting, font changes, coloring etc that occurred from the first macro. I have had the first macro save the active workbook and close and have the 2nd macro re-open the file but it sill overwrites the formatting. If I do not have the 2nd macro run the format changes are saved. I have tried saving the file after the first macro runs with .xls and .xlsx extension and no luck.
View 3 Replies
View Related
Sep 7, 2010
I've just switched to 2007 and can't seem to find where they've moved the ability to change the width of bars in a chart. Where is it in 2007?
View 7 Replies
View Related
Jul 16, 2014
I have a text file that I need to open in MS Excel 2007. The file contains the following data. (Each column is delimited by the "|" character.)
Part #|Inventory ID
1743|213,221
1864|10,40
1948|1170,1180
5265|100,104,107,10004
Ultimately, I need three columns but the data needs to look the same as it did before I opened the file.
When I open the file for the first time, I use “Text to Columns” to delimit the fields by the "|" character. The problem is that the Inventory IDs in the middle column get a bit whacky.
Here's what I'm left with:
Part # Inventory ID
1743 213,221
1864 10,40
1948 11,701,180
5265 10,010,410,710,004
The comma is retained appropriately when there are two 2- or 3-digit Inventory IDs.
When a row has multiple, longer Inventory IDs or Inventory IDs that vary in length, the comma is moved to every 3rd decimal place.
I tried putting quotation marks around the data before I opened the text file for the first time but that didn’t do anything. I tried Custom Formatting to retain the comma position (0000,0000) but this only worked when I had two 4 digit IDs. I also changed the number type to Text and General. Once the comma was changed, I couldn’t figure out how to get it back.
How to best retain the format of my Inventory IDs.
View 6 Replies
View Related
Mar 17, 2009
I'm having a problem with named ranges in a chart. I'm using Excel 2007 in Windows XP.
I have a line graph with twenty different series all using dynamic ranges. I created each series individually, typing the name and then the dynamic range I had previously defined. As far as I am aware, Excel demands when writing the reference that you specify which sheet/workbook this named range is from, so, given the scopes of my ranges are all 'workbook', I added the name of the workbook to the references.
e.g.
Series name:
Series1
Series values:
='workbook name'!range1
This seems to work fine, but when I save and then re-open the file, the dynamic ranges no longer work. If I go to Select Data and look at the reference for a series, it has been changed thus:
Series values:
=[0]!range1
View 2 Replies
View Related
Jan 27, 2012
Using Excel 2007. Is there a straightforward way to do a waterfall chart?
eg. stacked bars running from left to right.
First Column = 2011 Headcount
2nd Column = stacked bar with additions (by category) - stepping up from the 2011 total.
3rd Column = stacked bar with reductions (by category) - steppind down from the first column + 2nd colum total.
4th column = 2011 exit (which will be at the same height as the bottom of the 3rd column).
View 3 Replies
View Related
May 4, 2013
I am in the process of [trying] to copy/convert my 2003 workbooks to 2010 but am unable to copy any of the formula's. I get the warning window that I'm sure most are familiar with.
I have Googled this issue but can't find any information on how to successfully copy my 2003 books to 2010 without losing my formulas.
View 5 Replies
View Related
May 13, 2013
I'm trying to scroll down my work sheet but it's not letting me. Every time I move the scroll bar down the page it just keeps showing me the same part of the sheet eg cells 1-30 when I want to see all the way down to the bottom. I have some 20,000 lines I need to scroll through but I can't see all of them. To add to this, I keep having lines hide between other lines so theres a big gap like going from line 120 to line 4000 and I have to manually unhide them every time to see them.
View 2 Replies
View Related
Feb 6, 2013
I have designed a pay voucher in excel 2007. In the Cell A5, I have a dropdown list (through data validation) of names. I want to scroll down the name and take a print of pay voucher. Let me, explain with an example. Cell A5 (having dropdown List of names)
JhonBillAdamMickNo name (balnk)No name (blank)No name (blank) I manually selected the Jhon and take the print of voucher. Now I want some codes which aquatically select the 'Bill' from dropdown list and take the print of voucher. Then it will select the 'Adam' from dropdown list and take the print of voucher . Then it will select the 'Mick' from dropdown list and take the print of voucher and so on till the last name of data validation list. Remember, I have some blanks in the end of drop down list. This macro should ignore those blanks.
View 2 Replies
View Related
