I have data below that is misaligned. I would like to know if there is a simple way to automate it's alignment like below
Table:
PC HW
PC
Operating Income
PC MN HW
PC MN
PC
Operating Income
[code].....
I have two tables each containing a column with Account ID. I want to in table A put a column that will return a yes or value of 1 if the ID in that row shows up in the ID column in table B. I have windows 7 with excel 2007
View 1 Replies View RelatedExcel 2007 crashing when trying to up date a data source within a pivot table?
View 3 Replies View RelatedScenario: I have a worksheet full of ~360 tasks. Tasks are broken down into phases, have owners, and have status'. I leverage a pivot table to easily sort my data by owner, or by status. When reviewing the pivot table with others we want to update the raw data. This entails changing worksheets and scrolling to the task in question.
I'm looking for an easier way to update the raw / original data.
Options I've tried to pursue but have come up empty:
Option 1: Excel modification? Is there a setting in Excel 2007 that would allow me to change a value in my pivot table and have it propagate to the original data set (another Excel worksheet)? So far the answer seems to be "no". Is this possible?
Option 2: Hyperlink from Pivot Table to Raw data field.
- I cannot create hyperlinks within PivotTable data cells.
- I have used the "hyperlink()" function OUTSIDE of my pivot table, along w/ a "match()" on a key field in my pivot table to create hyperlinks back to my raw data... But this is prone to breaking.
- Is there a way to enable hyperlinks from within a Pivot Table? I have seen other requests from individuals that had a pivot table with actual hyperlinks (e.g. [URL]...) and they could not 'activate' them.
Option 3: Tool Tip VBA Form w/ Link?
- If I can't create hyperlinks directly in the table, then how about a function so then when i click (mouse over?) a pivot table cell a form appears with a hyperlink back to the source data?
Option 2 and 3 Assume that there's an way to get at the underlying location of the raw data (e.g. "Pivot Table Worksheet!E10" comes from "RawData!C4". I've dug through some VBA documentation at Microsoft.com but came up empty. I know this link must exist behind the scenes - In Excel 2007 when you mouse-over a pivot table cell Excel displays: "Row - Phase - Owner - Status", which is directly out of the raw data table/worksheet. [[This was an incorrect assumption... When i looked at the pivot table tool-tip closer I realize it was just walking through my data :'( row.
What is the VBA Code to revel the source cell? If i can get at that data, (and hyperlinking can be turned on w/in the pivot table...) then I can easily write a script to walk through the pivot table and create links back to the raw data... Not a perfect solution - but it takes away the need to search through the source data for the row I want.
how to find the source data range of a pivot table (that already exists) in Excel 2007?
View 1 Replies View RelatedI am familiar how to perform the task of bringing in an access table into excel, then using a data validation filter to control the data set in Excel 2003.
How to replicate this procedure in Excel 2007?
My current spreadsheet shows text that's aligning just slightly to the left of center. In the Format Cells menu under Alignment, I have selected Center for both Horizontal and Vertical. There is no indent. Orientation is 0 degrees. Text is set to wrap. Merge cells is unchecked. Text direction is Context.
When I double click a cell to change the text, it centers correctly as the cursor blinks. But when I click somewhere else and it stops blinking and allowing me to type in the cell, it aligns slightly to the left of center.
I'm selecting only some rows in a Table trying to sort only these rows (e.g. rows 11 thru 75 in a 200 row table), but when I hit Sort Excel always overrides my selection by selecting all the rows in the table instead. The same thing happens in VBA. I'm using Excel 2007.
View 12 Replies View RelatedI'm looking for a way to take information that is in a table in an Adobe file and importing it into a table format in Excel 07. I'm able to copy the table from Adobe and paste it into Excel as a picture, as I need the data to come into Excel in columns and rows. I have Adobe Acrobat 9 Pro version that I use to open the PDF file.
View 1 Replies View RelatedI prepared a Pivot Table and then i add some data in it but now all data is not showed by Pivot Table.
I do all necessary things like refresh and all but unable to increase a range.
How to increase range for Pivot Table in 2007.
I have a large table of results that looks like this...
Forename___Surname___Art___Maths___Science___English___Drama
Billy________Bob_____________B_______A________C_____________
Michael_____Micky_____A_____D_______B_________________C____
Shelly______Sholly_____A*____A________________A________B____
I am looking for a way to write this data in a list like this........
Billy__Bob__Maths___B
Billy__Bob__Science_A
Billy__Bob__English__C
Michael__Micky__Art__A
Michael__Micky__Maths__D
Michael__Micky__Science__B
Michael__Micky__Drama__C
Shelly__Sholly__Art__A*
Shelly__Sholly__Maths__A
Shelly__Sholly__English__A
Shelly__Sholly__Drama__B
Excel 2007
I have a pivot table in Office 2007. I want to filter the last column such that the values in the data area are greater than a certain number. But all those filter options are grayed out. The only option available (and working) is to select the top n entries. So clearly a reference into the data field to filter a column works, but why not by value?
View 9 Replies View RelatedI cannot remember how/if I can ALWAYS exclude blank results from my pivot table.
I'm hoping i don't need to use a macro, it should be in the settings for the pivot table, I hope...
I use Excel2007.
I am trying to rename a excel table from its file name after importing the data into the current sheet i am working in. Is there a method for going this? I can do it manually easily, but when I try to record myself within a macro, it still uses the file's previous name in the code before renaming it. Using Excel 2007.
View 5 Replies View RelatedI am using Excel 2007 and I created a table (i.e., listobject) using the macro recorder as follows:
Code:
ActiveSheet.ListObjects.Add(xlSrcRange, Range("$A$3:$J$50"), , xlYes).Name = "MyData"
Questions:
1. How do I delete this table via VBA?
2. How would I check to see if this table already exists so it follows this logic:
If "table does not exists" then
'create it (using the line of code above)
End If
I have been tasked with doing a work tracker so we can see what work operatives have done between a date range. The processing of the date range is being done in VBA.
The tracking info comes from an external table that is linked into Excel (version 2007). This table is also filtered.
The problem I have is that there are 3 different tasks that the operative can be doing (each has a different time on how long it should take to complete the task, however that is irrelevant for what I need).
This results in multiple entries in the table (min of 1, max of 3) for each operative. There is a seperate column in the table as well which has the total number of each task that they have done.
So for example the table looks similar to this.
Clock No - Task - Sum of task
239 ------- A -------- 5
239 ------- B ------- 10
239 ------- C ------- 15
What I want to be able to do is to get the sum total for the sum of tasks for the operative, so in the above example for operative 239 I want a value of 30
Is there a formula that can do this? (it is a filtered table so the formula needs to count only visible items)
I have tried playing around with
=SUMPRODUCT(SUBTOTAL(3,OFFSET($A:$A,ROW($A:$A)-MIN(ROW($A:$A)),,1)), --($A:$A=K414315))
but I cant get what I need.
In my data, I have:
1. Age (up to 20, 21-30, 31-40)
2. Gender (male, female)
3. Location (London, Paris, Berlin)
I want to see Age and Gender as column labels and Location as row labels. However, I don't want Gender as a sub-set of Age - I want Age Labels followed immediately by Gender labels ie:
Upto20 / 21-30 / 31-40 / Male / Female
I don't want: 21-30 Male / 21-30 Female / 21-30 Total / etc etc..
Is there a way to specify this in a pivot table?
Excel 2007 holds data of mine in a "format as table" Table. I want to rank the values in one column. Normally I want to do that by ranking the value in the current row against all the remaining values in that column. That is easy.
I got stuck today when I wanted to rank the value of the field in the current row with only a subset of the values in the column. I want to rank the current against the half-dozen or so records that have "A" in an adjacent column, and rank values having "B" in that other column against only the other values a "B" and so forth.
It would be best for all this to be done in formulas in the table rather than a clever use of a pivot or other? But really, I may be open to different approach than I was trying for if I can use successfully!
I'm currently using Excel 2007 to get information from closed workbooks and updating my file.
First of all I create a table on selected range through "Insert table" command having something like this:
Then I have I piece of VBA code that tries to update every single cell of a column in this case it's updating %LD10 column:
But like you can see in first capture, the code updates every single cell with last value of variable fichero, having, at the end, the same value in whole column.
In Excel 2003 I created a macro that copied data from a table, pasted into a new sheet, created a pivot table, copied and pasted that data next to pivot table, sorted, copied and pasted into chart data. I've used this macro in Excel 2007 with no problems.
Now I'm trying to create a similar macro but it won't complete the pivot table. My Pivot Table Field List should have the Row Label and Values populated but when I run it all that is populated is the Values field.
Is there something in 2007 that will not allow me to create a macro using a Pivot Table or am I doing something wrong? The code is below if that helps ...
How do I sort out columns aligning them to match data in another column?
Column B is 200 rows long all with data such as FLEZ054246. Columns C is 100 rows long but it will match some from B. I need to align C,D,E with B as long as C & B match. The rows that don't match can be left open for C, D, E.
EX.
Column B Column C Column D Column E
FLEZ054246..........TXEZ061244.........WCG................TX
TXEZ061411.........TXEZ059129..........DOUGLAS...........FL[code].....
aligning some data. Cupno has more entries than seqno and there are duplicate entries. I cannot think of a way to get seqno+results to align with cups. If it's possible to delete rows the don't have a corresponding seqno thats ok too. I've attached the example workbook. Sheet1 is the data and Sheet2 contains what ideally the results should look like
View 2 Replies View RelatedColumn A contains the date, every day since 1/2/07 to present
Column B contains a value for that date
Column D has dates within the range in Column A but at odd days (e.g. 4/2/07, 10/2/07)
Column E has data which corresponds to the date in Column D.
Can anyone advise of a formula which can allow me to put the data in Column E in line with the dates on column A rather than the dates in column D?
I want to have in Column C values from Column E that match with the dates in Column A, so for example next to 1/2/07 the cell would be empty but next to 4/2/07 in column A would be the value corresponding with that date in columns D & E.
How do I sort out columns aligning them to match data in another column?
For instance.
Column B is 200 rows long all with data such as FLEZ054246. Columns C is 100 rows long but it will match some from B. I need to align C,D,E with B as long as C & B match. The rows that don't match can be left open for C, D, E.
EX.
Column B Column C Column D Column E
FLEZ054246..........TXEZ061244.........WCG................TX
TXEZ061411.........TXEZ059129..........DOUGLAS...........FL
TXEZ061244.........TXEZ061101..........ERNIE...............TX
TXEZ061101.........FLEZ059314..........JASON...............FL
FLEZ054336.........TXEZ064240.........ERNIE................FL
TXEZ063075........TXEZ059503.........MICHEAL............TX
FLEZ060652.........TXEZ059027.........CLAIRE...............TX
FLEZ-054341........TXEZ059063.........CLAIRE...............TX
TXEZ060723.........TXEZ059164.........PAUL..................FL
TXEZ059503
FLEZ059314
TXEZ059164
TXEZ059129
TXEZ059063
TXEZ059051
TXEZ059027
I need it too look like this:
Column B Column C Column D Column E
FLEZ054246..........FLEZ054246...........ERNIE................FL
TXEZ061411
TXEZ061244.........TXEZ061244.........WCG..................TX
TXEZ061101.........TXEZ061101.........ERNIE.................TX
FLEZ054336
TXEZ063075
FLEZ060652
FLEZ-054341
TXEZ060723
TXEZ059503.........TXEZ059503.........MICHEAL............TX
FLEZ059314..........FLEZ059314.........JASON...............FL
TXEZ059164.........TXEZ059164.........PAUL.................FL
TXEZ059129.........TXEZ059129.........DOUGLAS...........FL
TXEZ059063.........TXEZ059063.........CLAIRE..............TX
TXEZ059051
TXEZ059027.........TXEZ059027.........CLAIRE..............TX
I have a pivot table that summarizes jobs that need to be completed on a specified date. I need to put that information on a calendar, but I would like to concatenate all information from that date so I can do a vlookup from the calendar. My other problem is that the number of cells change for each date, so I cannot specify exact cells, (some only have 1 entry, but others may have 4 or more). Can I specify a range of cells based on the result of the pivot table?
I have attached the pivot table, calendar and the data sheet with the vlookup info. Am I using the proper calendar or method to find this info?I have struggled with this for over a week now.
I have created a pivot table using a family name in row labels. The names appear in alphabetical order unless the person's name is the same as a month or day of the week. The result is that I have Mr Sun and Mr May at the top of my list, rather than listed alphabetically. Sorting the list does not solve the problem. It switches Mr Sun and Mr May, but does not included them in the main list. Is there a setting I can use that will stop Excel 2007 thinking that these words are something that they are not?
View 4 Replies View RelatedI believe that I am finally getting the hang of pivot tables and VBA ... pretty nice. Now for my latest frustration - calculated fields.
I have a pivot table created which compares two years of data. The problem seems to be that this data is from the same data field (PINSAL) even though it shows in two columns (year 2007 and year 2008).
1 - I need to subtract the 2007 figure (column C) from the 2008 figure (column D) in a calculated field called DollarVariance
2 - I need to divide DollarVariance into the 2007 figure to create a calculated field called PercentVariance
This seems easy to do if I had two different variables used to create the 2007 and the 2008 data but it is the same datafield. Can I use column letter? Can I use the column name assigned by the pivot routine (12 - 2007 and 12 - 2008)?
I have a pivottable that has a calculated field returning a percentage of two other feilds. I have pivotcharted the result and now want to include a median of the calculated feild results on the same chart.
I want to use a pivot chart as it'll accomodate changes to the data range and different page fields.
using xl2007
I'm using Excel 2007. My pivot table seems to be limiting me to 256 columns in the Values/Data area. In researching below I believe that I should be able to have 16,000 columns in my Pivot Table.
[URL] The "Big Grid" and Increased Limits in Excel 2007
PivotTables Maximum rows displayed in a PivotTable report is 1 million.
Maximum columns displayed in a PivotTable report is 16,000.
Maximum number of unique items within a single Pivot field is 1 million.
Maximum number of fields visible in the Fields list is 16,000.
I am working with Excel 2007 and have an occurring problem when I resize a table. Some of my forumlas copy to the new rows, while others do not. How can I ensure all my formulas copy to the newly created rows. Also sometime when they do copy to the new row an #REF! in the formula where the range should be , yet if I copy and paste the formula from the above row it works.
Here is an example of one of my Formulas Note Sheet1!$J$3:$J$500 is also a table Called Data
=SUMPRODUCT((Sheet1!$J$3:$J$500)*(Sheet1!$A$3:$A$500=$A14&DP$4)) and this is how it is inserted into a new row
=SUMPRODUCT((Sheet1!#REF!)*(Sheet1!#REF!=$A15&DP$4))