I am trying to reformat the attached doc into one single column, It's a race listing of overseas marathons and I need it to look like this
Event Name
Event Date
City
Country
Entry fee
Website
in date order, one event after the other in a single column so I can flow it into a word doc ready to be designed. I need to apply in Excel (I am using 2007) to get this doc into the required format?!!
I frequently have to work with tables set up like this:
A1 A2 A3
B1 B2 B3
C1 C2 C3
All I would like to do is to transpose them into one single column:
A1
A2
A3
B1
B2
B3
C1
C2
C3
I want to transpose multiple rows to single column and I'm dealing with huge data.
For example, I am working with data like this
A1 A2 A3
B1 B2 B3
C1 C2 C3
and I have to transpose to
A1
A2
A3
B1
B2
B3
C1
C2
C3
I'm using following vb code:
Sub ToOneColumn()
Dim i As Long, k As Long, j As Integer
Application.ScreenUpdating = False
Columns(1).Insert
[Code] ........
The script terminate without completing the job and shows error as "runtime error '1004': application -defined or object defined error".
I have a spreadsheet that calculates data in multiple columns (A:AN) and each column has 27 rows of data called "Sheet 1". As it stands, the spreadsheet goes out very far. On "Sheet 2" I would like for all of the data in "Sheet 1", columns A:AN to be "transposed" to "Sheet 2" in column A only. So, column A on "Sheet 2" would have the data from "Sheet 1" A1:A27, B1:B27, C1:C27, so on and so forth. I would like for the formatting to maintain the same order as well.
An example would be:
Sheet 1
Column A B
Row
1 Green Red
2 Blue Yellow
3 Black Cyan
4 Pink Magenta
[code]....
We utilize large data sheets that can be as large as 300K in rows and 10 to 15 columns wide. Because of how we receive the data, we are forced to manipulate things so that all matching data for a record ends up on a single row. (e.g. Record#, Document Type, Husband Name, Wife Name, Wife Maiden Name, Etc.)
Right now here's how the data is received:
a
a
a
b
b
c
c
c
c
d
d
d
e
e
e
e
Using two vba scripts, we first separate the data with row spaces between the unique data as follows:
a
a
a
b
b
c
c
c
c
Then with another script, we transpose the data as follows:
a a a
b b
c c c c
d d d
e e e e
When we transpose the data, the end result starts at the top of the page and go down eliminating the original blank rows. Not a huge issue but I would like to be able to maintain the original data format of the rows so that the data matches the original sheet line for line. The end result would give me the data as follows...
a a a
b b
c c c c
d d d
e e e e e
where the vertical gaps between the letters matches the original rows. Like I said, not a huge issue since we can rejoin the transposed data to the original data fairly easily. But it would be nice if we could end up with the above format for speed sake.
The two scripts we use, one-to insert the rows and two-to transpose, take a very long time to run with the transpose script taking the longest by far. On a 30K row sheet, it will take on our systems around 30 minutes to transpose and about 15 minutes to insert rows. Because we have several columns that need to be transposed, a 30K row sheet will take at least 2 hours to complete. A 300K row sheet, that will take 10 to 15 hours to complete.
Is there any way to speed up the scripts either by upgrading to a faster CPU and or writing the scripts to preform faster?
My preferred solution would be to write (have) a formula to preform the transposition that gives me the results as noted above since formula's run so much faster than vba. Is this possible? I have tried all kinds of formulas and can not come close and of course the straight transpose function does not give me the solution I need as noted above.
I have enclosed an excel 2010 spreadsheet with 10K rows of data in rows along with the scripts I use (nothing sensitive here). The tabs at the bottom shows you the data before I transpose, then the data after it has been transposed . To speed up the scripts, I have stripped away the all the rest of the data from the original sheet except just what I need to transpose at one time. Once that is completed, we then re-join the transposed data with the original sheet. The six digit number you see to the far left of the data is the record ID number from the original data. We use this to rejoin the transposed data with the original data so that we know everything is back where it should be. (Note: The insert rows script is run on the original data and not the data you see on the enclosed spreadsheet. That is the only way we can generate unique rows with matching ID numbers. We arrive at this by taking the original data, concatenate the record ID with the column we want to transpose and add a # between the two so that we can break things back apart after the transposition using the text to column function using the # as the separator.)
The sheet I have attached is in the 2010 Macro Enabled format...(xlsm format). We use the xlsb (binary) format for the data to reduce the file size as our normal procedure and run the macros from inside that format. Changing from the xlsx to xlsb format did seem to speed up the scripts a bit and greatly improved the file performance as a whole e.g. saving and loading.
One thing I have done to speed up the scripts is to strip all the data away that is not needed for the transposition. That did work but only a marginal amount.
We are using windows 8.0 with 4G memory and your basic processor speed...e.g. nothing fancy.....just your basic stock computer. Nothing else unusual is installed or running on the computer or at the time the scripts are running.
For those of you that process large sheets, how much of a performance upgrade will we see in processing our scripts by either upgrading memory to 8G (or more or much more) and or getting a faster processor? Or have we reached the maximum script speed already? Or is this a limit to Excel.
One other issue to note: As I stated above, on the 30K row sheets, not a super problem with about 2 hours needed to run the scripts on all the data on the sheet. But on the 300K row sheets, it can take 12 or more hours to run and there are times when things 'lock up' running the scripts on sheets this size.
I have data that as 872 columns - each representing a question ID (headers in the first row). I then have 1494 rows of data where each represents 1 unique person. In other words, A2 = Person ID and B2-AGN2=the potential answers to the questions.
What I'd like to do is compact this into 3 columns: "Person ID", "Question", "Answer".
"Person ID" will have duplicate values for each question that is answered.
"Question" is the Question Text
"Answer" is each answer to each of the questions.
So in a condensed form, my data looks like this:
ID Q1 Q2 Q3 QAge
3 1 5 8 35
4 1 2 12 64
And I would like it to look like this:
ID Question Answer
3 Q1 1
3 Q2 5
3 Q3 8
3 QAge 64
4 Q1 1
etc.
It would be fantastic if Excel has the functionality to ignore null answers and therefore just not even bother populating Question ID when an Answer is blank (e.g. they didn't report an age, so QAge doesn't show up under the new "Question" field), but I have no idea if that's doable.
I have a lot of datasets like this with a varied number of rows and columns, so any way to adjust whatever formula/macro is out there to work for those. I'm terribly new with macros and so I've been having difficulty adapting them if I need to.
I'm using Excel 2007.
I ve got a similar issue with converting the rows to columns... At the file I attached below, I need to convert to columns some sort of data which is organized as rows. They are all set up as 12 cells in a row and I need to convert them to a single column which keeps the time references of the data. I mean, both of the data and their years will be needed for my aims, but it is not important to keep the years columns with dataset, as long as rows are literally converted to columns under their order.
I actually found a vba macro on the net but it doesn't useful at all when it comes to keeping all data in their original order. It has some specific design to solve the issue without the aim of keeping the data in its original order I guess. Is there any possibility to modify its code or any other way to do this?
Code:
Sub Data_to_Column()
Dim rData As Range
Dim r As Range, c As Range
Dim rStart As Range
Dim counter As Integer
[Code]...
I have a spreadsheet like the following, in 2 columns: ...
View 9 Replies View RelatedI have 9 worksheets with 80 wells listed and Jan thru Dec prod for each well.
The current format is: ...
I have a piece of equipment that I use for temperature profiling temperature controlled chambers. The equipment has up to 16 channels for logging data, although we typically only use 9. The data output from the equipment is by Text file and we convert this to Excel for manipulation into a format that can be issued as a certificate.
The test file outputs the data mainly in a single column and similarly when it is converted to excel the data remains in a single column. To enable us to present the data in a format that is presentable as a certificate we most transpose the data from each channel from a single column into an individual columns for each channel. Because I have limited knowledge of Excel, this operation is very time consuming and I'm sure there must be a quicker way to perform this operation in Excel.
I have attached a copy of the text file and the resulting Excel file with the data in it's original format and also in the final format. This is only a snapshot of the data over 30 minutes and we normally carry out measurements over 24 hours.
I really could use some help here. I have ~25,000 rows of data, contact information, and I am trying to convert it to columns with the corresponding 9 column headers (Full Name, Job Title, Company, Business Street, Busines City, State, Business Phone, Business Fax, Web Page, E-Mail Address). The challenge is that each record does NOT have the same number of rows...?? I am new to this forum, so please forgive me if this a stupid question. I've attached the data for three records below and also in the attached spreadsheet ...
View 14 Replies View RelatedI have 300 rows worth of data that looks similar to this, all organized in one column:
John Q. Smith
Programmer
2111 NW 13th St
Anywhereville, USA, 55555
(555) 555-5555
Joe P. Snider
Organizer
5645 NW 45th St
Anywhereville, USA, 55555
(555) 555-5555
Patty Williams
Accountant
6454 NW 34th St
Anywhereville, USA, 55555
(555) 555-5555
As you can see it is consistent with the name, position, address line 1, address line 2, Phone number, for every single entry. All my names are already alphabetized so I don't have to worry about it. What I want to do is have the information for each entry translated into 5 separate columns so it looks like this.
John Q. Smith Programmer 2111 NW 13th St Anywhereville, USA, 55555 (555) 555-5555
Joe P. Small Organizer 5645 NW 45th St Anywhereville, USA, 55555 (555) 555-5555
Patty Williams Accountant 6454 NW 34th St Anywhereville, USA, 55555 (555) 555-5555
Supposing I started the sheet in the top left corner at A1, I was just going to have cell B1=A1 then Cell B2=A6 then just autofill down column B but it doesn't work. I have seen some people do something similar to what I want with VBA but I am convinced there has to be something simple in with an excel formula seeing as my information is already so organized and consistent.
I have an Excel Sheet1
The sheet has horizontal info a list of "headers" going horizontally across row 2. So row 2 may have A2= Date, B2=Name, C3=Style, D3= ........
The header rows will vary in some cases. I want to use a formula to copy and transpose the information to Sheet2. I would like the list of headers to go vertical instead of horizontal. So A1=Date, A2-Name, A3=Style, A4= ..... all the way down.
I know about Copy -> Special -> transpose but I need something that is dynamic and simple. I know I can use the indirect function and do something like this =INDIRECT( "Sheet1!" & ADDRESS(1,2) ) . However I was trying to figure out two things. How best can I make the columns dynamic and increment up especially if I am not starting at A1? Is there a better formula to use that is not volatile like INDIRECT?
I have a long list of data with many columns and I'd like all the information to be in one column without manually copying and pasting each column and adding to the first column. The data has different amounts of rows and columns as well. An Example is below. I'm using Excel 2010. Is there a formula or something for this? This isn't the data I'm using but just an example since I do this frequently.
Data Looks like:
54654
31233
42343
51234
66968
43252
54657
63253
[code]....
Would like to look like:
54654
66968
79282
91596
68185
31233
[code]....
I am looking for a way of allowing users to edit the existing cells at their will, but simultaneously disabling the option to insert/ delete columns or rows.
By enabling Sheet Protection, I cannot find a way to do it. Can I?
I am on MS Excel 2007 by the way.
I found the way, just unlock all cells in Format Cells, Protection Tab. Then Protect sheet and de-select what you want to disable.
I've got an issue where I'm trying to transpose data from one column into several rows. I've been looking for a macro to help me out but can't seem to find a way to do this. Does anyone have any idea how I can do this?
Ideally, the macro would be written so it would find the data in the column and move it to a new sheet and then it would repeat the process throughout the document. The macro would know that the data is grouped b/c of the blanks found between the data set. So as the macro is running, once it hits a blank, it would then copy and transpose the data and continue. Does this make sense?
I've posted a sample of the info I'm working with.
I am trying to develop a compliance report with Excel 2007) based upon a simple pass/fail criteria. The subtotals must be tracked both by Device (column) and by Requirement (row). There are macros (not included in the attached sample) that hides both columns and rows. I successfully found an example which I modified to correctly calculates data for a column when rows are hidden (see GOOD function below). However, I'm totally clueless on how to calculate data by row when columns are hidden (see BAD function below). What I'm trying to figure out is highlighted in red in the attached spreadsheet.
GOOD
=SUMPRODUCT(SUBTOTAL(103,OFFSET(B$2:B$5,ROW(B$2:B$5)-MIN(ROW(B$2:B$5)),,1))*(B$2:B$5="Pass"))
BAD (returns 0 and includes a circular reference)
=SUMPRODUCT(SUBTOTAL(103,OFFSET($B2:$F2,,COLUMN($B2:$F2)-MIN(COLUMN($B2:$F2)),1))*($B2:$F2="Pass"))
I want to count the number of duplicate rows where the exact text in columns A and B match. An example is as follows, where column C would be the desired result. Note that there are hundreds of different text values of column A and hundreds of column B, I just simplified the example.
Excel 2007
ABC1AX72AX
3AX
4AX
5AX
6AX
[Code] ......
I have a column with (for example) 5 entries A1, A2, A3, and so on. I would like to pick up this data, tranpose it into a row, put it on the 2nd sheet, but (again for example) be specific about where i want it to go. I may want to have A1 at B2, A2 at E2, A3 at H2, etc
-A B C D E F G H
1x
2y
3z
4
5
becomes
-A B C D E F G H
1
2 -x - - y - - z
3
4
5
macro for an Excel 2007 file. It has to be a macro. I have cells in two columns I need to look at. Column A will have a value of cat, dog, or mouse. Column B will have a date. If A2="mouse" AND B2<"1/1/2013" Then A2="" ElseIf A2=mouse" AND B2>="1/1/2013" Then A2="mouse". I don't need anything to happen if A2 is equal to cat or dog. The macro has to move down the entire A and B column: A3/B3, A4/B4, and so on until the end of the columns. Hope this makes sense. I've tried a few macro samples I found online but they don't quite fit what I need done, or I don't know how to modify it.
View 2 Replies View RelatedI'm using this code to find values of "FEP MHS" or "LSD MHS" in column S and if column S containes either of these values it deletes the entire row from the spreadsheet. I need this to work on a spreadsheet that runs on a daily basis and each day it contains a different number of rows. I have used this code to successfully delete most rows that contain these values in Column S but for some reason it does not delete all the rows, typically leaving 6 - 7 rows that contain these values. I'm using Excel 2007 I need code that finds the last row used and deletes the entire row if these values are present.
Dim CelRSLHMHSD As Range, RngRSLHMHSD As Range, iRSLHMHSD As Long
Set RngRSLHMHSD = Columns("S").SpecialCells(xlConstants, xlTextValues)
For iRSLHMHSD = RngRSLHMHSD.Count To 1 Step -1
If RngRSLHMHSD(iRSLHMHSD).Value = "FEP MHS" _
Or RngRSLHMHSD(iRSLHMHSD).Value = "LSD MHS" _
Then RngRSLHMHSD(iRSLHMHSD).EntireRow.Delete
Next iRSLHMHSD
I am still new to this, and I pulled this code off of another site.
Background:
- Using Excel VBA, 2007
- I have a sheet that has a name in B6, has 4 blank spaces beneath, and then another name, 4 blank spaces, etc.
- I wrote a code to fill each of these 4 blank spaces with the value at the top of each
- The code works, but it won't fill the 4 spaces at the bottom of the column.
What is needed:
-how I can adjust to code below to fill in the 4 spaces beneath the last value in the column?
Code:
Sub FillBlanks()
Dim rRange1 As Range, rRange2 As Range
Dim iReply As Integer
[Code]....
I am using excel 2007. I have data which, instead of being posted on multiple columns, is all within 1 column. The data most simply has the characteristics of:
AAA
AAA - description
BBB
BBB - description
CCC
CCC - description
and so on..
I would like to move the descriptions from column A to column B:
AAA AAA - description
BBB BBB - description
CCC CCC - description
and so on...
What would be the best way to accomplish this?
I need to transpose data from Column A to Row 2 and down.
The data in column A is in sections of 19 rows and then a blank cell and another 19 rows of data contimuously, It is a dynamic range and can contain many thousands of Rows.
The data needs to be transposed from Column A to row 2 (row 1 has the head line for each column) so the 19 lines of data is now spread accross 19 columns in row 2 and the next section from column A is spread accross the 19 columns in row 3 and so on.
My data looks similar to the below. (Test Number 0001 starts in A1)
Test Number 0001
21-Feb-2014
Kettel
Office
Demo
[code]....
I use Excel 2007
Is it possible to take the information below and make one list out of columns F, H and J based on the common information in column C? For example, group all the 18s in a list, followed by the 44s.this is excel 2007
column CColumn Fcolumn Hcolumn J
Option code
18180L12369301/123/54
18180L12369301/123/54
18180L12369301/123/54[code].....
I am using MS Excel 2007 and I am trying to create a macro which will copy column E and paste the data in column E to the bottom of column D. However each week the amount of rows in these column with vary, they will always be the same amount of rows in column E as in column D but there may be 20 rows one week and a 100 rows the next.
The formula I currently have is below but this will only work for a specified number of rows. How I could change this to work for any number of rows?
Code:
Sub IPT()
'
' IPT Macro
'
'
Range("E1").Select
[Code] .....
I have a pivot table with multiple row fields and multiple column fields. One of the column fields is a Date and I need some VBA that will auto-sort the columns into ascending order by the Date column field.
E.g., if the first four column labels are "2-Jun-2010, 13-May-2009, 16-May-2013, 17-May-2012" then i want the sort to arrange them as "13-May-2009, 2-Jun-2010, 17-May-2012, 16-May-2013".
Note: This is the left to right order of the columns i'm talking about, not the top to bottom order of the rows, or the data in the rows but specifically the column labels.
I've tried googling a solution and I can find a variety of code that deals with sorting the data in the rows in all sorts of ways, but nothing on how to order the columns.
i'm using excel 07, and the source data for the pivot table has the Date field formatted as custom "dd-mmm-yyyy". This can be changed if necessary.
I have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
The title makes it sound simpler than it is. I have 2 columns of data which I need to transpose.
The difficult bit is that Reference Number 1 may have 3 reasons (so therefore 3 rows) that need transposing into 4 columns (reference number, reason1, reason2, reason3)
Is there a way to do this?
I have attached a spreadsheet with the original table and how I need the end result to look.
Following the tips doesn't allow to remove a character.
I exported email addresses from Outlook and they have the following character ' in front of the email address.
Using Excel 2007.. it says :"check if your search formatting and criteria are defined correctly. If you are sure that matching data exists in this workbook, it may be on a protected worksheet. Excel cannot replace data on a protected worksheet"
So I made a new file, and copied and pasted the cells into the new spreadsheet.. same message.