Excel 2007 :: Find And Delete Single Character?
Jan 23, 2014
Following the tips doesn't allow to remove a character.
I exported email addresses from Outlook and they have the following character ' in front of the email address.
Using Excel 2007.. it says :"check if your search formatting and criteria are defined correctly. If you are sure that matching data exists in this workbook, it may be on a protected worksheet. Excel cannot replace data on a protected worksheet"
So I made a new file, and copied and pasted the cells into the new spreadsheet.. same message.
View 4 Replies
ADVERTISEMENT
Jun 22, 2012
If I have a cell which begins with a few spaces and then has a character, how do I use the find function to see how many spaces until some character is present in the cell. The * does not work with this.
Excel 2007
B
4
a
Sheet1
View 6 Replies
View Related
Jan 9, 2014
I have two spreadsheets. one contains a master list of computer names. the other contains a list of computer names to be removed from the master list (exception list).
I need to go through the master list and remove any computer names that are on the exception list- for example, if 'computer1' is in the exception list, i have to find and remove 'computer1' from the master list.
The exception list is quite long, and I want to automate this process if possible. not sure how to achieve this.
I'm using Excel 2007 Standard.
View 4 Replies
View Related
Jun 14, 2013
Macro code to find several column names in row 1 (which can be anywhere in the work sheet) and delete them e.g. date, month, code, amount etc.......
Excel version 2007
View 4 Replies
View Related
Mar 16, 2012
I've got a whole load of cells that have a pipe ( | ) on the end of the value which I'm trying to remove.
Easy enough thinks me, so;
Code:
=LEFT(AB188,LEN(AB188)-1)
And then Copy / Paste Values Still has a pipe on the end... I check the cell for trailing spaces, there are none...
I check the length of the cell (658) against the length of the result from the formula (657)...
So, my formula works, but when I copy and paste as values the pipe remains.
I'm using Excel 2007 and the cell contatins other pipe characters I'd like to keep in there so I can't find and replace or anything.
View 8 Replies
View Related
Jul 13, 2009
I tried to write a script that does following:
I have data that looks like this:
1
1
2
2
3
3
4
5
5
6
6
As you can see, mostly every two rows contain same values. But there are some values (here it is 4) that is a "single row".
I want to find every "single row" and delete them. I tried a long time but reached frustration now.
View 9 Replies
View Related
May 15, 2012
I'm using excel 2010. I'm working with columns of values where most of the values are numbers - which is fine, and there are some numbers that have a "p" at the start of them.
e.g. Column has 49, 52.2, p56.7, 34
OK, I want to preserve the 56.7 but I want to delete the "p". I'm thinking I've got a mental block as to how to delete the unwanted "p"s but I can't think of how to do it at the moment! My code goes as follows:
If Left(Cells(1,1),1) = "p" then
'delete the "p" and leave the remaining number in tact
End if
View 4 Replies
View Related
Dec 21, 2011
My set up office 2007 win xp pro ie8
is it possible using vba ideally with a button marked save, to save a single worksheet and name it, in CSV format
Then I would like to be able to do the reverse load a CSV file back in to a work sheet
Expanding upon this
1. Click a command button with caption “save”
2. Take the name of a given sheet, in my case DataToUpLoad and append it with a number to give a sheet name of DataToUpLoad 1 the first time it is save and DataToUpLoad 2 the next time and so on
3. Click another command button with the caption “load” interact with usual dialog box.
My current work around is to copy a sheet open a new work book past the sheet in the save that work book as CSV
The reason this is required is to mate up with the php on the server side
View 3 Replies
View Related
Jun 25, 2012
My Excel 2007 worksheet contains a cell where a percentage is manually input. A freight cost is calculated based on the input percentage. Typically, the percentage is 3-7% but once in a while freight is excluded and the percentage is zero.
My issue is that when a 0 is input the cell appears blank and I would like it to display 0.00%. The remainder of the worksheet needs to have the zero display turned off.
View 3 Replies
View Related
Dec 1, 2013
I have a macro that imports text file and puts a comma after each number (alphanumeric also). I have tried to change it to put single quote around the number and comm afterwards.
Text file listing
123
456
789
When I run my marco I get the following
123, 456, 789
which is what I want...
Now I want the same text to have single quotes around the data example:
'123', '456', '789'
All that I have tried to adjust keeps missing single quote at the front end and also missing the single quote at the rear end example: 123', '456', '789
Here is the vba I'm running
Sub GetserialNumbers()
Dim FileNum As Long, PathAndFileName As String, TextFromFile As String
Const Delimiter As String = ", "
[Code].....
Whe I run this I have to select the text file to get. I keep it in my documents as a quick access. I'm using MS VBA 6.5 Excel 2007 Windows 7 Enterprise.
View 2 Replies
View Related
Oct 22, 2013
I am trying to reformat the attached doc into one single column, It's a race listing of overseas marathons and I need it to look like this
Event Name
Event Date
City
Country
Entry fee
Website
in date order, one event after the other in a single column so I can flow it into a word doc ready to be designed. I need to apply in Excel (I am using 2007) to get this doc into the required format?!!
View 5 Replies
View Related
Jan 22, 2013
I want to use the find function on a range and search for a "," character. If I get a "," I want to return a True otherwise false.
I tried just recording a macro using the find function but no code shows up.
how to use the find feature in a macro, can this be done?
excel 2010
View 4 Replies
View Related
Mar 12, 2014
I've got problem with combining 3 cells into one. First cell contains text, second have date yyyy-mm-dd and last one is as previous. I'm using formula .
[Code] .....
And I'm getting: TEXT_41694_41701. How can that be corrected to use formatting for date format to get TEXT_yyyy-mm-dd_yyyy-mm-dd?
View 7 Replies
View Related
Jan 4, 2012
Automating Excel from Access, I'm attempting to generate a single sheet workbook and save to a Sharepoint site. This process works fine on my machine (XL2007, XP), but on a coworkers computer (XL2003, XP), the code throws a 1004 error on the save as line. However, the really odd thing is that stepping through the code doesn't throw an error on the coworkers machine.
Here's the sub being ran; the line it errors out on is the first branch in the .saveas block.
Code:
Private Const csSharePointSaveAs = "\sharepoint-us.mycompany.comsitesfinance adminlah blahlah-blahCustomer Publication Tracking.xls"
Private Sub PublishXLtoMOSS()
Dim objXL As Excel.Application 'Object
Dim wb As Excel.workbook 'Object
Dim ws As Excel.Worksheet 'Object
Dim rs As DAO.Recordset
Dim i As Long
'Set objXL = CreateObject("Excel.Application")
[Code] ...........
View 1 Replies
View Related
Aug 13, 2013
I have a large file with a bunch of color coding and need to delete my red rows only.
View 3 Replies
View Related
Dec 3, 2013
In any open (new or existing) workbook (Excel 2007), I cannot delete a column by right clicking the column header and highlighting the entire column. The "delete" word is greyed out and not selectable. I CAN however still delete a column by going to the "Cells" toolbar, then "Delete" pulldown menu, then "Delete Sheet Columns". Right clicking the column header is much simpler and easier.
BTW, I can still delete rows by both methods of right clicking on the row header and by going to the Cells toolbar.
View 5 Replies
View Related
Jan 13, 2009
I am using excel 2007 and when I right click on the worksheet tab, delete is greyed out. My workbook/sheet is not shared. I also had the problem owith row and columns. CommandBars("row").Reset sorted that out but I can't seem to sot out the tab issue.
View 6 Replies
View Related
Jan 11, 2012
I am using Excel 2007 and I created a table (i.e., listobject) using the macro recorder as follows:
Code:
ActiveSheet.ListObjects.Add(xlSrcRange, Range("$A$3:$J$50"), , xlYes).Name = "MyData"
Questions:
1. How do I delete this table via VBA?
2. How would I check to see if this table already exists so it follows this logic:
If "table does not exists" then
'create it (using the line of code above)
End If
View 3 Replies
View Related
Oct 29, 2013
I have a file that has an original file format .xls
I saved as .xlsx (I am using Excel 2007) with a different name so I could make changes to the new file without changing the original.
That turn off compatibility mode.... but it is still "shared". While it is shared I cannot delete a sheet. In fact, I really don't even want it to be shared. If the file is open, and someone else opens it, I want it to open as "read only". I cannot uncheck the "Allow changes by more than one user at the same time. This also allows workbook merging." checkbox because it is greyed out.
View 3 Replies
View Related
Oct 20, 2008
The following code deletes a specific connection in a workbook:-
ActiveWorkbook.Connections("text123").Delete
How can I code this so that I can delete ALL connections in a workbook without having to specify the names (as these will always be different).
View 3 Replies
View Related
Jan 10, 2012
What i have is a workbook that can have multiple sheets. Sheet 2,3,4 (if there are) are a continuation of sheet 1. First 2 rows of sheet 1 are headers and the last row of the last sheet (can be 2,3, 4....) is a footer. There are 14 columns (A-N) in each sheet. Col "N" has set status and col I has set names.
What i am looking for is a macro that can perform the following actions in the the set order:
1) deletes all rows where status in col N is "closed"
2) delete all rows where name in Col I is "Many"
3) if there are multiple sheets copy all data in 1 sheet once above 2 are deleted
4) I want to update cell A2, C2, I2, M2 & N2 with Hostel, Direction,Name,Flight & Status respectively
5) Create a pivot table with all data (Col A-N & Row 2 to last) in a new sheet and call it Summary - Pivot
I can then manually select how the pivot will look
Currently i am going through all sheets manually and filtering data. Using excel 2007
View 9 Replies
View Related
Jan 23, 2012
I'm using this code to find values of "FEP MHS" or "LSD MHS" in column S and if column S containes either of these values it deletes the entire row from the spreadsheet. I need this to work on a spreadsheet that runs on a daily basis and each day it contains a different number of rows. I have used this code to successfully delete most rows that contain these values in Column S but for some reason it does not delete all the rows, typically leaving 6 - 7 rows that contain these values. I'm using Excel 2007 I need code that finds the last row used and deletes the entire row if these values are present.
Dim CelRSLHMHSD As Range, RngRSLHMHSD As Range, iRSLHMHSD As Long
Set RngRSLHMHSD = Columns("S").SpecialCells(xlConstants, xlTextValues)
For iRSLHMHSD = RngRSLHMHSD.Count To 1 Step -1
If RngRSLHMHSD(iRSLHMHSD).Value = "FEP MHS" _
Or RngRSLHMHSD(iRSLHMHSD).Value = "LSD MHS" _
Then RngRSLHMHSD(iRSLHMHSD).EntireRow.Delete
Next iRSLHMHSD
View 1 Replies
View Related
Aug 6, 2012
HTML Code:
Sub DeleteEmptyColumns2()
Dim Cell As Range
For Each Cell In Range("4:4")
If Cell = "0" Then
Cell.EntireColumn.Delete
End If
Next Cell
End Sub
I am attempting to remove columns in my table of data, using the above code seems to remove some them but not all, is this the best way to loop through a range?
View 8 Replies
View Related
Sep 21, 2012
I have a public/shared Excel 2007 workbook on our network and someone colored an entire column yellow. When that happened, it increased the number of rows to over 655,000. I didn't know that was posible but they are there... The thing moves very slowly now and when I try to delete (45,000 lines at a time), I either get a error window telling me I don't have resources to perform the operation, or I do smaller chucks and after 30 minutes deleting lines, it will not save.
I would rather not have to recreate the whole workbook if I can delete the lines on this one page.
View 9 Replies
View Related
Oct 3, 2011
I have written a sub with the purpose of finding rows based on a critieria, copying the rows to another worksheet and deleting the original row.
The code:
Code:
Sub MoveToIgangvaerende()
'
' Flytter opgaven til sheetet Igangværende projekter
'
Dim i, j, Index As Integer
Forfra:
For i = -1 To 1000
If Sheets("Pipeline").Cells(3 + i, 20) = "Ja" Or Sheets("Pipeline").Cells(3 + i, 20) = "ja" Then
[Code] ......
I get the error message "Method 'Delete' of object 'Range' failed" at the line "Sheets("Pipeline").Cells(3 + i, 18).EntireRow.Delete".
The sub has previously worked perfectly fine.
View 4 Replies
View Related
May 2, 2012
I'm working in Excel 2007 and need to move data from multiple rows to a single row if the ID matches.Below is sample data I would be working with. I want to move data from columns F-U to the right of the original data in the row above it. I would also like to delete the rows that had data moved.
GIDSurnameNameEmployee Number OriginalDate of birthGranting ARE
Employing ARECountry Employing ARECHCM Supplier IDVehicle
Investmt. shares / Awards at termination dateMatching Shares
at termination dateTermination
[Code]....
View 3 Replies
View Related
Jul 11, 2012
I have VBA code that attempts to delete an entire row from my worksheet:
Code:
Cells(3,1).Select
Selection.EntireRow.Delete
This works fine on small data sets, but on larger data sets it gives me the error message, "Excel cannot complete this task with available resources". This happens even when I try to do the deletion manually (without VBA code). Clearly, the code itself is not the problem.
My document has about 250,000 rows and 2,500 columns. While this is big, it is significantly smaller than Excel's documented limit of 1,048,576 rows and 16,384 columns.
I am using Excel 2007. My computer has 2GB of RAM but even when I try it on a computer which has 8GB of RAM it gives me the same error. If I "ClearContents" instead of "Delete" it works fine. For my purposes, however, deletion is entirely necessary.
View 9 Replies
View Related
Nov 25, 2013
I am using Excel 2007 and have a simple enough macro to paste data in to another sheet - simple is what I do best.
Sub Macro1()
'
' Macro1 Macro
With Sheets("data")
.Range("B3").PasteSpecial xlPasteAll
End With
End Sub
I am wanting to change this so that before it pastes any data into B3 it will delete all data from B3:AE22.
I have had a look around and found plenty to delete full rows or worksheets but not just to delete the data in those cells.
View 8 Replies
View Related
Jul 14, 2014
Using Microsoft Excel 2007, VBA
I am trying to display an error message if a range is missing '0' or '100', or is empty.
I figured out how to display error when the selected range is empty, but I cannot figure out how to find if a particular value exists within a range and return an error if there isn't.
View 2 Replies
View Related
Jul 17, 2013
I have a excel 2007 workbook that has 5 sheets "MASTER" , "RED" , "WHITE", "GOLD" & "BLUE". There are 7 columns in each sheet and the master has about 8,000 rows . In column D of each sheet there is a unique number (approx. 8 - 10 digits ) that I would like to at the press of a command button search through sheets "RED" "WHITE" "GOLD" & "BLUE" against the unique numbers in the "MASTER" sheet and if there any duplicates numbers delete the entire row but leave all the data in the master sheet.
View 2 Replies
View Related
