Excel 2007 :: Delete Rows If Value Is Found In Column S
Jan 23, 2012
I'm using this code to find values of "FEP MHS" or "LSD MHS" in column S and if column S containes either of these values it deletes the entire row from the spreadsheet. I need this to work on a spreadsheet that runs on a daily basis and each day it contains a different number of rows. I have used this code to successfully delete most rows that contain these values in Column S but for some reason it does not delete all the rows, typically leaving 6 - 7 rows that contain these values. I'm using Excel 2007 I need code that finds the last row used and deletes the entire row if these values are present.
Dim CelRSLHMHSD As Range, RngRSLHMHSD As Range, iRSLHMHSD As Long
Set RngRSLHMHSD = Columns("S").SpecialCells(xlConstants, xlTextValues)
For iRSLHMHSD = RngRSLHMHSD.Count To 1 Step -1
If RngRSLHMHSD(iRSLHMHSD).Value = "FEP MHS" _
Or RngRSLHMHSD(iRSLHMHSD).Value = "LSD MHS" _
Then RngRSLHMHSD(iRSLHMHSD).EntireRow.Delete
Next iRSLHMHSD
I have a excel 2007 workbook that has 5 sheets "MASTER" , "RED" , "WHITE", "GOLD" & "BLUE". There are 7 columns in each sheet and the master has about 8,000 rows . In column D of each sheet there is a unique number (approx. 8 - 10 digits ) that I would like to at the press of a command button search through sheets "RED" "WHITE" "GOLD" & "BLUE" against the unique numbers in the "MASTER" sheet and if there any duplicates numbers delete the entire row but leave all the data in the master sheet.
I've attached a dummy worksheet that shows constant values of 1.00 in columns D and E. In the actual workbook, user action will sometimes cause these values to change to something other that 1.00. The user may wish to delete the action that caused the change.
I need a macro that will search from the last cell in column D upward to the first instance of a cell that is not equal to 1.00 and select that cell and those immediately above with the same value as the first found cell.
For example, in the attached worksheet the search would start in the last cell of Columd D and search upward. It would find cell D23 and upward to D19. These entire rows would be deleted.
I'm working in Excel 2007 and need to move data from multiple rows to a single row if the ID matches.Below is sample data I would be working with. I want to move data from columns F-U to the right of the original data in the row above it. I would also like to delete the rows that had data moved.
GIDSurnameNameEmployee Number OriginalDate of birthGranting ARE Employing ARECountry Employing ARECHCM Supplier IDVehicle Investmt. shares / Awards at termination dateMatching Shares at termination dateTermination
This works fine on small data sets, but on larger data sets it gives me the error message, "Excel cannot complete this task with available resources". This happens even when I try to do the deletion manually (without VBA code). Clearly, the code itself is not the problem.
My document has about 250,000 rows and 2,500 columns. While this is big, it is significantly smaller than Excel's documented limit of 1,048,576 rows and 16,384 columns.
I am using Excel 2007. My computer has 2GB of RAM but even when I try it on a computer which has 8GB of RAM it gives me the same error. If I "ClearContents" instead of "Delete" it works fine. For my purposes, however, deletion is entirely necessary.
In any open (new or existing) workbook (Excel 2007), I cannot delete a column by right clicking the column header and highlighting the entire column. The "delete" word is greyed out and not selectable. I CAN however still delete a column by going to the "Cells" toolbar, then "Delete" pulldown menu, then "Delete Sheet Columns". Right clicking the column header is much simpler and easier.
BTW, I can still delete rows by both methods of right clicking on the row header and by going to the Cells toolbar.
HTML Code: Sub DeleteEmptyColumns2() Dim Cell As Range For Each Cell In Range("4:4") If Cell = "0" Then Cell.EntireColumn.Delete End If Next Cell End Sub
I am attempting to remove columns in my table of data, using the above code seems to remove some them but not all, is this the best way to loop through a range?
Using excel 2007. I am interested in writing a VBA code to delete rows based on the text starting content. I would like to delete rows with cells that do NOT start with an "S" or "SA"
I am still new to this, and I pulled this code off of another site.
Background: - Using Excel VBA, 2007 - I have a sheet that has a name in B6, has 4 blank spaces beneath, and then another name, 4 blank spaces, etc. - I wrote a code to fill each of these 4 blank spaces with the value at the top of each - The code works, but it won't fill the 4 spaces at the bottom of the column.
What is needed: -how I can adjust to code below to fill in the 4 spaces beneath the last value in the column?
Code:
Sub FillBlanks() Dim rRange1 As Range, rRange2 As Range Dim iReply As Integer
I am trying to reformat the attached doc into one single column, It's a race listing of overseas marathons and I need it to look like this
Event Name Event Date City Country Entry fee Website
in date order, one event after the other in a single column so I can flow it into a word doc ready to be designed. I need to apply in Excel (I am using 2007) to get this doc into the required format?!!
I need to transpose data from Column A to Row 2 and down.
The data in column A is in sections of 19 rows and then a blank cell and another 19 rows of data contimuously, It is a dynamic range and can contain many thousands of Rows.
The data needs to be transposed from Column A to row 2 (row 1 has the head line for each column) so the 19 lines of data is now spread accross 19 columns in row 2 and the next section from column A is spread accross the 19 columns in row 3 and so on.
My data looks similar to the below. (Test Number 0001 starts in A1)
I am using excel excel 2007 in windows 7. I have a search button that works great, however, I want it to also highlight the cell green, when it finds what I am searching for. Here is the code below for the search button I have.
Private Sub CommandButton6_Click() Dim searchthis As String, Found As Range Me.Unprotect Password:="123" searchthis = InputBox("Type Number.", "Property Search") searchthis = searchthis & "*" Set Found = Range("A:A,e:e").Find(What:=searchthis, LookIn:=xlFormulas, LookAt:=xlWhole) If Not Found Is Nothing Then Found.Select Me.Protect Password:="123" End Sub
I am using MS Excel 2007 and I am trying to create a macro which will copy column E and paste the data in column E to the bottom of column D. However each week the amount of rows in these column with vary, they will always be the same amount of rows in column E as in column D but there may be 20 rows one week and a 100 rows the next.
The formula I currently have is below but this will only work for a specified number of rows. How I could change this to work for any number of rows?
Code: Sub IPT() ' ' IPT Macro ' ' Range("E1").Select
I have an excel 2007 file which contain a lot of macros. File size is 100MB. This file is not developed by myself, it's post in the webpage and let the members of the page to download on daily basis.. I've been downloading and using this file for over a year with no problem until this week.
Problem: During opening the file. There is a message box popped up, saying "Excel found unreadable content in filename.xlsm'. do you want to recover the contents of this workbook ? If you trust the source of this workbook, click Yes." When I click "yes", excel is trying to repair the file. Once it's done, I could see only the contents, however, all the macros are gone. When I copied this very same file and open in other notebooks, everything is working fine...
Assumption: Couple days ago, I was writing/testing macros in other workbooks and also opened this particular file. I might did something stupid which cause this problem...
During the same time, I used to have the same problem with another file. I solved it by copy and open with another PC then copy macros and paste it to the file on my notebook.
I need a VBA code that will search column H for any value that DOES NOT start with "9" (this is a character field). If it finds a cell that doesn't start with "9", I would like it to delete the entire row. It will need to repeat this process for every cell in Column H that has a value and then stop.
I'm trying to conditionally format rows of data based on duplicates in the first column, then filter the results. I have a table of data with mutiple variables assigned to different "headings" that looks a little something like this:
A B C D
[Code]....
[selects the table, then GoTo Special selects the blanks, fills in the blanks with the cell above, then Copy and Pastes As Values the entire table again to fill everything in]
I’m stuck on how to input a formula into the conditional formatting window that will: Format the text to white in columns A, B, and E based on there being a duplicate above that row in Column A only. i.e. conditionally format the values with a * below:
A B C D E
[Code]....
If I use the conditional formula I found: =A1=A2, then cell E3 gets made white text when I don’t want it to, hence the “referencing column A” part of the question (Column A is always a unique ID number whereas Column E can have a duplicate in the row above). [Edit: Why can't I type Enter or put a line break here... I'll try re-edit at home...] When I go to filter on Column C for YYY again, the conditional formatting needs to realise to un-white the text, which is my next headache because it means conditional formatting that acts relative to hidden rows as a result of a filter... Oh and did I mention the client wants this done in 2003? This is an afterthought though – as I can force them to use 2010 if need be
I am using excel 2007 and when I right click on the worksheet tab, delete is greyed out. My workbook/sheet is not shared. I also had the problem owith row and columns. CommandBars("row").Reset sorted that out but I can't seem to sot out the tab issue.
I have a file that has an original file format .xls
I saved as .xlsx (I am using Excel 2007) with a different name so I could make changes to the new file without changing the original.
That turn off compatibility mode.... but it is still "shared". While it is shared I cannot delete a sheet. In fact, I really don't even want it to be shared. If the file is open, and someone else opens it, I want it to open as "read only". I cannot uncheck the "Allow changes by more than one user at the same time. This also allows workbook merging." checkbox because it is greyed out.
I have two spreadsheets. one contains a master list of computer names. the other contains a list of computer names to be removed from the master list (exception list).
I need to go through the master list and remove any computer names that are on the exception list- for example, if 'computer1' is in the exception list, i have to find and remove 'computer1' from the master list.
The exception list is quite long, and I want to automate this process if possible. not sure how to achieve this.
Following the tips doesn't allow to remove a character.
I exported email addresses from Outlook and they have the following character ' in front of the email address.
Using Excel 2007.. it says :"check if your search formatting and criteria are defined correctly. If you are sure that matching data exists in this workbook, it may be on a protected worksheet. Excel cannot replace data on a protected worksheet"
So I made a new file, and copied and pasted the cells into the new spreadsheet.. same message.
What i have is a workbook that can have multiple sheets. Sheet 2,3,4 (if there are) are a continuation of sheet 1. First 2 rows of sheet 1 are headers and the last row of the last sheet (can be 2,3, 4....) is a footer. There are 14 columns (A-N) in each sheet. Col "N" has set status and col I has set names.
What i am looking for is a macro that can perform the following actions in the the set order: 1) deletes all rows where status in col N is "closed" 2) delete all rows where name in Col I is "Many" 3) if there are multiple sheets copy all data in 1 sheet once above 2 are deleted 4) I want to update cell A2, C2, I2, M2 & N2 with Hostel, Direction,Name,Flight & Status respectively 5) Create a pivot table with all data (Col A-N & Row 2 to last) in a new sheet and call it Summary - Pivot I can then manually select how the pivot will look
Currently i am going through all sheets manually and filtering data. Using excel 2007
I have a public/shared Excel 2007 workbook on our network and someone colored an entire column yellow. When that happened, it increased the number of rows to over 655,000. I didn't know that was posible but they are there... The thing moves very slowly now and when I try to delete (45,000 lines at a time), I either get a error window telling me I don't have resources to perform the operation, or I do smaller chucks and after 30 minutes deleting lines, it will not save.
I would rather not have to recreate the whole workbook if I can delete the lines on this one page.
