I have a column with (for example) 5 entries A1, A2, A3, and so on. I would like to pick up this data, tranpose it into a row, put it on the 2nd sheet, but (again for example) be specific about where i want it to go. I may want to have A1 at B2, A2 at E2, A3 at H2, etc
-A B C D E F G H
1x
2y
3z
4
5
becomes
-A B C D E F G H
1
2 -x - - y - - z
3
4
5
I've got an issue where I'm trying to transpose data from one column into several rows. I've been looking for a macro to help me out but can't seem to find a way to do this. Does anyone have any idea how I can do this?
Ideally, the macro would be written so it would find the data in the column and move it to a new sheet and then it would repeat the process throughout the document. The macro would know that the data is grouped b/c of the blanks found between the data set. So as the macro is running, once it hits a blank, it would then copy and transpose the data and continue. Does this make sense?
I've posted a sample of the info I'm working with.
I have A:1 - X365 filled with hourly energy prices for 2013. I need to convert these to a single column - A1:A8760. I have tried writing some code and some macros with no success.
If I were to do it manually 365 times, the macro would look like this:
Copy Row A1:X1
select sheet 2
Paste Special > Transpose (fills A1:A24)
repeat for rows 2-365
Tried using this from a previous post, but it takes A1:A24 then B1:B24 and so on and makes them a single column - so it doesn't work unfortunately.
Sub MakeColumn()
Dim rng As Range
Dim LastRowSrc As Long
Dim LastRowDst As Long
Set rng = Worksheets("Sheet1").Range("A1")
[Code] .....
I frequently have to work with tables set up like this:
A1 A2 A3
B1 B2 B3
C1 C2 C3
All I would like to do is to transpose them into one single column:
A1
A2
A3
B1
B2
B3
C1
C2
C3
I have a spreadsheet that calculates data in multiple columns (A:AN) and each column has 27 rows of data called "Sheet 1". As it stands, the spreadsheet goes out very far. On "Sheet 2" I would like for all of the data in "Sheet 1", columns A:AN to be "transposed" to "Sheet 2" in column A only. So, column A on "Sheet 2" would have the data from "Sheet 1" A1:A27, B1:B27, C1:C27, so on and so forth. I would like for the formatting to maintain the same order as well.
An example would be:
Sheet 1
Column A B
Row
1 Green Red
2 Blue Yellow
3 Black Cyan
4 Pink Magenta
[code]....
I want to transpose multiple rows to single column and I'm dealing with huge data.
For example, I am working with data like this
A1 A2 A3
B1 B2 B3
C1 C2 C3
and I have to transpose to
A1
A2
A3
B1
B2
B3
C1
C2
C3
I'm using following vb code:
Sub ToOneColumn()
Dim i As Long, k As Long, j As Integer
Application.ScreenUpdating = False
Columns(1).Insert
[Code] ........
The script terminate without completing the job and shows error as "runtime error '1004': application -defined or object defined error".
I am trying to reformat the attached doc into one single column, It's a race listing of overseas marathons and I need it to look like this
Event Name
Event Date
City
Country
Entry fee
Website
in date order, one event after the other in a single column so I can flow it into a word doc ready to be designed. I need to apply in Excel (I am using 2007) to get this doc into the required format?!!
I have a piece of equipment that I use for temperature profiling temperature controlled chambers. The equipment has up to 16 channels for logging data, although we typically only use 9. The data output from the equipment is by Text file and we convert this to Excel for manipulation into a format that can be issued as a certificate.
The test file outputs the data mainly in a single column and similarly when it is converted to excel the data remains in a single column. To enable us to present the data in a format that is presentable as a certificate we most transpose the data from each channel from a single column into an individual columns for each channel. Because I have limited knowledge of Excel, this operation is very time consuming and I'm sure there must be a quicker way to perform this operation in Excel.
I have attached a copy of the text file and the resulting Excel file with the data in it's original format and also in the final format. This is only a snapshot of the data over 30 minutes and we normally carry out measurements over 24 hours.
I really could use some help here. I have ~25,000 rows of data, contact information, and I am trying to convert it to columns with the corresponding 9 column headers (Full Name, Job Title, Company, Business Street, Busines City, State, Business Phone, Business Fax, Web Page, E-Mail Address). The challenge is that each record does NOT have the same number of rows...?? I am new to this forum, so please forgive me if this a stupid question. I've attached the data for three records below and also in the attached spreadsheet ...
View 14 Replies View RelatedI have the attached file with two worksheets D30(1) and Sheet 2.
I need to extract some of the information contained on the D30(1) sheet into the format as contained on Sheet 2. It is almost like a transpose but because all of the information is not needed and all cells don't have info in it, I didn't even try to transpose the D30(1) info.
Is there an easy way to extract the information from sheet D30(1) to present it in the format of Sheet 2? I need to do this for approximately 50 sheets similar to D30(1). Some sheets might even have more columns than the example provided.
I am trying to find an automatic way to create a finished report format that draws information from a different sheet within the same workbook. The trouble I'm running into is:
The raw data consists of some lines without any data, and some lines with data. The purpose of the final report is to display only those rows with data in them.
I have a sample spreadsheet attached, with the first sheet containing raw data, and the second containing a rough Idea of what I'd like the final infomation to look like. Somehow this seems like it should be really simple, maybe doable with an if statement, but I can't figure out how to get it to just ignore the empty rows without skipping a row in the final doc.
We utilize large data sheets that can be as large as 300K in rows and 10 to 15 columns wide. Because of how we receive the data, we are forced to manipulate things so that all matching data for a record ends up on a single row. (e.g. Record#, Document Type, Husband Name, Wife Name, Wife Maiden Name, Etc.)
Right now here's how the data is received:
a
a
a
b
b
c
c
c
c
d
d
d
e
e
e
e
Using two vba scripts, we first separate the data with row spaces between the unique data as follows:
a
a
a
b
b
c
c
c
c
Then with another script, we transpose the data as follows:
a a a
b b
c c c c
d d d
e e e e
When we transpose the data, the end result starts at the top of the page and go down eliminating the original blank rows. Not a huge issue but I would like to be able to maintain the original data format of the rows so that the data matches the original sheet line for line. The end result would give me the data as follows...
a a a
b b
c c c c
d d d
e e e e e
where the vertical gaps between the letters matches the original rows. Like I said, not a huge issue since we can rejoin the transposed data to the original data fairly easily. But it would be nice if we could end up with the above format for speed sake.
The two scripts we use, one-to insert the rows and two-to transpose, take a very long time to run with the transpose script taking the longest by far. On a 30K row sheet, it will take on our systems around 30 minutes to transpose and about 15 minutes to insert rows. Because we have several columns that need to be transposed, a 30K row sheet will take at least 2 hours to complete. A 300K row sheet, that will take 10 to 15 hours to complete.
Is there any way to speed up the scripts either by upgrading to a faster CPU and or writing the scripts to preform faster?
My preferred solution would be to write (have) a formula to preform the transposition that gives me the results as noted above since formula's run so much faster than vba. Is this possible? I have tried all kinds of formulas and can not come close and of course the straight transpose function does not give me the solution I need as noted above.
I have enclosed an excel 2010 spreadsheet with 10K rows of data in rows along with the scripts I use (nothing sensitive here). The tabs at the bottom shows you the data before I transpose, then the data after it has been transposed . To speed up the scripts, I have stripped away the all the rest of the data from the original sheet except just what I need to transpose at one time. Once that is completed, we then re-join the transposed data with the original sheet. The six digit number you see to the far left of the data is the record ID number from the original data. We use this to rejoin the transposed data with the original data so that we know everything is back where it should be. (Note: The insert rows script is run on the original data and not the data you see on the enclosed spreadsheet. That is the only way we can generate unique rows with matching ID numbers. We arrive at this by taking the original data, concatenate the record ID with the column we want to transpose and add a # between the two so that we can break things back apart after the transposition using the text to column function using the # as the separator.)
The sheet I have attached is in the 2010 Macro Enabled format...(xlsm format). We use the xlsb (binary) format for the data to reduce the file size as our normal procedure and run the macros from inside that format. Changing from the xlsx to xlsb format did seem to speed up the scripts a bit and greatly improved the file performance as a whole e.g. saving and loading.
One thing I have done to speed up the scripts is to strip all the data away that is not needed for the transposition. That did work but only a marginal amount.
We are using windows 8.0 with 4G memory and your basic processor speed...e.g. nothing fancy.....just your basic stock computer. Nothing else unusual is installed or running on the computer or at the time the scripts are running.
For those of you that process large sheets, how much of a performance upgrade will we see in processing our scripts by either upgrading memory to 8G (or more or much more) and or getting a faster processor? Or have we reached the maximum script speed already? Or is this a limit to Excel.
One other issue to note: As I stated above, on the 30K row sheets, not a super problem with about 2 hours needed to run the scripts on all the data on the sheet. But on the 300K row sheets, it can take 12 or more hours to run and there are times when things 'lock up' running the scripts on sheets this size.
The title makes it sound simpler than it is. I have 2 columns of data which I need to transpose.
The difficult bit is that Reference Number 1 may have 3 reasons (so therefore 3 rows) that need transposing into 4 columns (reference number, reason1, reason2, reason3)
Is there a way to do this?
I have attached a spreadsheet with the original table and how I need the end result to look.
I have a large datset that looks like this:
++++++++++++++++++++++++++++++++++
+ + A + B + C +
++++++++++++++++++++++++++++++++++
+1+ ID + EventDate + EventType +
+2+ 111 + 1/1/1995 + Visit +
+3+ 111 + 1/30/1995 + Vaccine +
+4+ 111 + 4/22/1998 + Visit +
+5+ 222 + 7/7/2000 + Survey +
+6+ 333 + 8/8/2001 + Labs +
+7+ 333 + 8/22/07 + Pharmacy +
+8+ 333 + 8/22/07 + Visit +
I would like to shade the rows with alternating colors so that all the data pertaining to a given ID can be easily spotted. In the example above, I would need A2:C4 to be shaded one color, A5:C5 another color, and A6:C8 the first color again.
I am using Excel 2007.
I have a series of numbers in one column. Is there some way I can divide all the numbers together by, say 10, without doing it manually?
eg.
12
15
15
25
20
should become
1.2
1.5
1.5
2.5
2.0
Is there a way in Excel to do that?
I would like to know how can i insert a blank row in between ACC# when ever a new series of data begins
name Acc # Balance Date
John 2222 200 june 2013
John 2222 344 june 2013
John 2222 700 Sept 2013
Silva 4444 333 June 2013
Silva 4444 333 June 2013
Silva 4444 333 June 2013
Raff 5555 897 June 2015
Raff 5555 897 June 2015
Raff 5555 897 June 2015
Raff 5555 897 June 2015
regards the two attached files (both are identical) except '1' has TWO Rows of data above the Macro Button and works correctly whereas '2' has only ONE Row (the desired option but does not work correctly!( Inserts Row in wrong place and incorrectly fill series)).
basically the program inserts a additional row below the last data entered, copies a formula cell from above and finally (the problem area) Series Fills a cell from data above.
I am trying to create a line graph and I have 17 rows of data for 17 different employees. There are 18 rows when including the header row.
My data is as follows
Column A - Employee Name
Column B - Month 1 data
Column C - Month 2 data
Column D - Month 3 data
Column E - Month 4 data
Column F - Month 5 data
When I highlight the data and go to the chart wizard, I select "Series in Rows".
However, on the series tab it only brings in the data for 6 employees.
Is there a way to automatically bring in all the data without having to do it manually, or is this a limitation of Excel?
I ve got a similar issue with converting the rows to columns... At the file I attached below, I need to convert to columns some sort of data which is organized as rows. They are all set up as 12 cells in a row and I need to convert them to a single column which keeps the time references of the data. I mean, both of the data and their years will be needed for my aims, but it is not important to keep the years columns with dataset, as long as rows are literally converted to columns under their order.
I actually found a vba macro on the net but it doesn't useful at all when it comes to keeping all data in their original order. It has some specific design to solve the issue without the aim of keeping the data in its original order I guess. Is there any possibility to modify its code or any other way to do this?
Code:
Sub Data_to_Column()
Dim rData As Range
Dim r As Range, c As Range
Dim rStart As Range
Dim counter As Integer
[Code]...
I have a spreadsheet like the following, in 2 columns: ...
View 9 Replies View RelatedI have 9 worksheets with 80 wells listed and Jan thru Dec prod for each well.
The current format is: ...
I have a chart in a workbook that works fine by looking at the following data series:
=Workings!$A$2:$C$35
In the data series above...where the numbers are 2 and 35 I have named ranges "CHART_Start_Row" and "CHART_End_Row" which will change dynamically as appropriate and can replace these static numbers - but how do I incorporate these named ranges into the data series reference?
I have an excel spreadsheet with my students' grades on it. I want to be able to click on a student's name and have a list of all the assignments, along with only that student's corresponding grades, transposed on a new sheet so that I can print out to give to a parent.
View 13 Replies View RelatedI have an Excel Sheet1
The sheet has horizontal info a list of "headers" going horizontally across row 2. So row 2 may have A2= Date, B2=Name, C3=Style, D3= ........
The header rows will vary in some cases. I want to use a formula to copy and transpose the information to Sheet2. I would like the list of headers to go vertical instead of horizontal. So A1=Date, A2-Name, A3=Style, A4= ..... all the way down.
I know about Copy -> Special -> transpose but I need something that is dynamic and simple. I know I can use the indirect function and do something like this =INDIRECT( "Sheet1!" & ADDRESS(1,2) ) . However I was trying to figure out two things. How best can I make the columns dynamic and increment up especially if I am not starting at A1? Is there a better formula to use that is not volatile like INDIRECT?
i need to write a formula that spits out the average of a series of numbers when (if):
every time "CAD" appears (column A) it takes the numerical figure of the cell directly to the right of it (column B). the data is arrange vertically, e.g., the range of "CAD"s is all vertical (column A), about 200 entries.
is there a formula/function that takes data from the columns completely adjacent to one another?
Im plotting data on a Line-Column 2 Axes Chart which works really well with 4 data series (2 column, 2 Line) but when adding a fifth data series, the fourth disappears from view. I can see its still there cos I can display the values but I cant get the line to appear. The values for the 5th series are also similar to other series values so its not like the chart cant display it....are there limits to the number of series on such a chart?
View 9 Replies View RelatedI just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
I am working with a huge database and need to transpose every ten cells in a column to ten rows.
Below is what I would like it to do, currently columns 90-0 are blank and I am trying to get a script to do it as I have over 550 subjects.
Subject
EconSlideQ6.RESP
90
80
70
60
50
40
30
20
10
0
[Code] .......
I have a list of names in columns with a header row. On another page labeled one of the header row names I need to call the corresponding names from the 1st page to the second page and transpose the range.
View 9 Replies View RelatedI am looking for a formula as per the thread title. I have attached an example workbook.
I have been playing around with SUMIFS and SUMPRODUCT but can't crack it.
sum based on criteria transpose columns to rows.xlsx