Excel 2007 :: Vlookup And Copy Value From Another Workbook?
Apr 15, 2014
Excel 2007
I have a workbook (book1) that is modifying multiple other workbooks (book2). I need to do a vlookup of a sheet in book1 from a value in book2. I then need to insert the value found by the lookup into G7:H7 (merged cells) of book2.
value is in column B of page "Routes" of book1. Found by value B3:C3 of book2. The vlookup looks in column A of book1. The found value is put into G7:H7 of book2.
In a step by step, to possibly make this more clear:
1) check value of B3:C3 in book2
2) find value in Routes sheet of book1, column A
3) upon match, grab the value of column B
4) insert that value into G7:H7 of book2
[URL]
View 3 Replies
ADVERTISEMENT
Oct 2, 2013
I want to copy the header from a previous months report and paste it to a new workbook in Excel 2007. How can I write a macro to copy from a1 to g2, keep the same column width and all formatting, then open a new workbook (trouble now in that I previously selected book1 for the new one but this could chnage), and then paste this to the new workbook, and then save this to a location on my computer? So that's, copy, open new workbook, paste keeping all formatting and values, and then save.
View 2 Replies
View Related
Dec 14, 2013
I have two Workbooks
1. Main (where I have a button and I intent to write code and paste the data)
2. Data (where I have data to be copied)
My code so far
Code:
Sub copy()
Dim wbData As Workbook
Dim wbMain As Workbook
Set wbData = Workbooks.Open("path")
Set wbMain = Workbooks.Open("path")
wbData.Sheets(1).Range("A1:A5").copy
wbMain.Sheets(1).Range("A1:A5").PasteSpecial
wbData.Close
End Sub
In the above code the problem is that the file wbMain is already open and when I try to re-open it gives an error and program crashes and if I do not open the file then it gives me the error and says sub or function not defined as wbMain variable is not set.
Second problem:When an error is thrown or I close my files, I lose all the VBA code and module? strange ! how to save modules permanently? using Excel 2007
View 9 Replies
View Related
Apr 3, 2013
Ok I am using Excel 2007. I want to copy 4 cells from a row on sheet 1 to sheet 2 based on value in first cell in row. Example if cell a13 > 0 then copy row 13, cells b13 thru e13 only to first available row in sheet two but starting from row 12 on sheet two. Because sheet 2 has title information at the top from row 1-12.
I would rather not have to use a button to do it, would like it to do it as data is entered in sheet 1.
View 5 Replies
View Related
Apr 15, 2011
In versions prior to Excel 2007, I was always able to copy a chart when I copied a tab. However, when I copy a tab in 2007, the data copies fine, but the chart does not. Something similar happens when I try to move a tab with a chart on it to another workbook.
View 5 Replies
View Related
Dec 11, 2011
I am using Excel 2007
I have a spreadsheet with 1,000 rows in multiple columns
In column "B" i have 8 unique names.
What I am trying to work out is to copy and paste all the rows for each unique name and save in a separate workbook named as the unique name.
View 2 Replies
View Related
Mar 10, 2014
Well to start off I am using Excel 2007, I have an invoice template set up across two sheets (Invoice & Price Table), on the first page is the actual invoice that needs to be filled in. I have made an userform for being able to fill in the invoice number,what type of test was done, and also things like hours and miles (an their costs per also)
. Now I am wanting to try and get it to where I can have the form look at the type of test cell and from there select the price located on the second sheet that is appropriate to that type, the thing is, there are two possible prices that it can be depending on if the company wanted the results "rush". I was suggested that I could use a check box on the invoice to indicate in the spreadsheet that it is a rush, and somehow link that in with a vlookup to be able to get what I wanted, but I'm not sure exactly how I would go about doing that.
View 9 Replies
View Related
Oct 4, 2013
I have two worksheets, contractor & list. Assume that Column (A) on the "contractor" worksheet is a named range from Column (A) on the "list" worksheet. On the "contractor" worksheet I would like to put in the contractors name, and auto populate the pay value in column (B). I have been using a Vlookup formula, but need to automate this process a bit more.
"Contractor" worksheet - Two columns: (A) I will input the contractors name from a dropdown list based on name range from my "list" worksheet. (B) is where I would like to populate the pay base on column (B) in my "list" worksheet.
Contractor (A)
Pay (B)
Jill
Fred
Jack
View 1 Replies
View Related
Dec 9, 2013
I am using Excel 2007, I have a customer sheet and a sales sheet in the same work book. My customer sheet lists all customers with a single entry only each with a unique customer code. My Sales sheet lists at an item level but does include the customer code so if my customer has purchased more than one item the customer code can be repeated on the Sales sheet on multiple rows.
When I do a vlookup to display the amount each customer has spent on the customer sheet, only the very first sales figure is displayed, if further down the sales sheet the same customer has made another purchase I want this figure to be added to the first figure and all I want to see on my customer sheet is the final total figure.
The vlookup formula I am currently using is:
=VLOOKUP(G2,Sales!$A$2:$B$1785,2,FALSE),
I'm thinking maybe a Vlookup will not do what I require, maybe I need a different formula/function?
View 8 Replies
View Related
Jun 27, 2011
I'm looking to simply find a function that allows me to lookup a certain value in a table of data and return the value in a specific column. So if I looked up the current date, 6/27/2011, it would return the week it is in (26). I dont want to be limited to just the monday column however, as the dates I will be throughout the entire week. Is there an easy way to do this in excel 2007?
MondayTuesdayWednesday ThursdayFridaySaturdayWeek
5/2/20115/3/20115/4/20115/5/20115/6/20115/7/201118
5/9/20115/10/20115/11/20115/12/20115/13/20115/14/201119
5/16/20115/17/20115/18/20115/19/20115/20/20115/21/201120
5/23/20115/24/20115/25/20115/26/20115/27/20115/28/201121
5/30/20115/31/20116/1/20116/2/20116/3/20116/4/201122
6/6/20116/7/20116/8/20116/9/20116/10/20116/11/201123
6/13/20116/14/20116/15/20116/16/20116/17/20116/18/201124
6/20/20116/21/20116/22/20116/23/20116/24/20116/25/201125
6/27/20116/28/20116/29/20116/30/20117/1/20117/2/201126
7/4/20117/5/20117/6/20117/7/20117/8/20117/9/201127
7/11/20117/12/20117/13/20117/14/20117/15/20117/16/201128
7/18/20117/19/20117/20/20117/21/20117/22/20117/23/201129
7/25/20117/26/20117/27/20117/28/20117/29/20117/30/201130
8/1/20118/2/20118/3/20118/4/20118/5/20118/6/201131
8/8/20118/9/20118/10/20118/11/20118/12/20118/13/201132
8/15/20118/16/20118/17/20118/18/20118/19/20118/20/201133
8/22/20118/23/20118/24/20118/25/20118/26/20118/27/201134
8/29/20118/30/20118/31/20119/1/20119/2/20119/3/201135
9/5/20119/6/20119/7/20119/8/20119/9/20119/10/201136
9/12/20119/13/20119/14/20119/15/20119/16/20119/17/201137
View 4 Replies
View Related
Dec 6, 2012
I have used this template for a Vlookup and have been having troubles that I simply cannot pin down. Some duplicated numbers in Columns A and C will NOT appear in Column B. I am also trying to work it out where when the results are displayed that Excel will tell me in a pivot how many loans are on both lists and how many loans are on each specific list.
View 7 Replies
View Related
Feb 20, 2012
I am using Windows xp and Excel 2007. I'm creating a user form and have a vlookup formula that goes to a table and looks up calories and sodium based on the text entered by the user. My problem is that I want to be able to populate the 3 columns with information and then sum the values that are returned to the Calories and Sodium columns. Is that possible with Vlookup?
=IF(ISNA(VLOOKUP(F8&G8&H8,Food!A:E,4,FALSE)),0,VLOOKUP(F8&G8&H8,Food!A:E,4,FALSE))
Water 24 ozOther DrinksGelsSolid FoodCaloriesSodium
00
00
00
View 7 Replies
View Related
Aug 14, 2012
I have data in a sheet in Excel 2007 that I am trying to move to another sheet in the same workbook.
I am using Vlookup to move the info from one sheet to the other.
However it seems that if the data in the original sheet cell is too large I get a #VALUE! error.
If I copy and paste the info from the cell it is fine.
How do I copy the information (hyperlink) in the original sheet cell to the destination sheet cell?
Here is the formula that I am using.
=HYPERLINK(VLOOKUP(A67,'verified1-4-12'!B:E,4,0))
verified1-4-12 is the original sheet name
View 8 Replies
View Related
Nov 27, 2013
I am trying to get one cell to look at different sheets. if the first sheet doesn't have a value, than look in the next sheet. current formula is
=IF(ISNA(VLOOKUP(Q2,'sheet2'!$D$2:$K$1807,7,FALSE)),"",VLOOKUP(Q2,sheet2'!$D$2:$K$1807,7,FALSE))
I am having cell return blank if no value is found. it is currently looking only at one sheet.
I don't want it to combine the values like this formula does.
=(VLOOKUP(Q2,'sheet3'!$D$2:$K$200,7,FALSE)&","&VLOOKUP(Q24,'sheet2'!$D$2:$K$1807,7,FALSE)) #.###,##.##
sheet 1 is where the cell I am writing the formula is in, and I want to look in sheet 2, 3, and possible 4 for a value, I want to only have the greatest value show between the sheets. is this possible.
I am using excel2007.
View 9 Replies
View Related
Mar 19, 2013
Code:
=D5-VLOOKUP($C5,$C$45:$F$80,2,0)
I have formulas such as above in my Worksheet. So the above is in Cell H5
For the Range $C$45:$F$80, I am inserting rows (So moving down the data) and copying data from $C$5:$F$40 as values into the new space in $C$45:$F$80
I am doing the above using a macro, but when I run it I want this
Code:
=D5-VLOOKUP($C5,$C$45:$F$80,2,0)
to stay static, but instead I end up with
[CODE=D5-VLOOKUP($C5,$C$85:$F$120,2,0)[/CODE]
So my Table Array $C$45:$F$80 changes to $C$85:$F$120
How can I keep it as $C$45:$F$80
The other references in the formula seem to stay as I want them.
View 2 Replies
View Related
Jul 29, 2014
Sample data
2014
2013
2012
Country A
2%
3%
Country B
5%
6%
7%
[code].....
Now, whenever I type in any country it should show me the most recent figure available for that country.
Suppose, if I type Country A in, say cell A14, then it should give me output 2% in cell, say A15. When I change that same cell to country C, it should give me output 10%, country B should give me output 5%.
Currently I have used IF and multiple/nested VLOOKUPs to arrive at this output. Is there any better way to do this with VLOOKUP and OFFSET?
I am using Excel 2007.
View 3 Replies
View Related
May 22, 2014
I have two data sets across two worksheets. The first worksheet contains sales order numbers (Sheet1:column A) and other data . The second worksheet contains sales order numbers (Sheet2:column A) and the product details.
On sheet1, I had to manually duplicate a sales order number (inserting another row) if the number of units of the order is greater than 1. I then need to fetch the product details from sheet2 for each unit for that specific order number. However in sheet2, there are multiple products for one sales order number.
How do i create a lookup/match to fetch the product details for each sales order number without duplicating the product details if there are multiple products for one sales order number?
I know a simple vlookup function will return the values that it matches first and that is not what i want.
Example: Sheet1
Column A (Sales Order#) | Column B (Quantity)
0417436GPCP | 1
0417436GPCP | 1
0413412FACY | 1
0413412FACY | 1
[code].....
View 6 Replies
View Related
Feb 17, 2014
very basic Excel user (using Excel 2007). Trying to see how I can use the VLookup function from multiple worksheets to get an average. I know it can be done, but just not sure how to go about doing that. My spreadsheet is attached - basically what I want to do is to get an average for the individuals listed in the "Consensus" tab for the figures that appear in Worksheets "1", "2" and "3".
View 14 Replies
View Related
Sep 6, 2011
What I have attached is spreadsheet I've built to quickly generate an army list for a tabletop game. Anyone can click on the Force Organization Slot (FOS) and choose the type of unit and from there, select the specific unit name attached to that FOS. Each individual unit has a list of options/upgrades currently attached to the sheet from cells AD through AX and the points cost listed next to each upgrade.
For example, when selecting the Rhino unit from the Dedicated_Transport FOS, there should be 4 drop down lists of selectable upgrades (Storm Bolter, Hunter-Killer Missile, Dozer Blade, and Extra Armor). Currently, I have only named the ranges for the Rhino and Razorback units in order to get this working properly without having to go through the entire list of units and change names/create ranges/ect.
What I'm aiming to do is to create an individual drop down list that is directly related to the Unit Name cell in order to populate a complete and selectable upgrade list for each unit. I have played around with some functions that work in the spreadsheet (see cells X10:X12) but do not work properly with Data Validation.
Oddly enough, when I enter this formula under Data Validation:
=IF($A$3<>$AD$1:$AD$182,VLOOKUP(A3,Options,2,FALSE),"")
I do not get an error, yet the drop down list does not allow me to select anything as I thought it would.
View 14 Replies
View Related
Dec 19, 2011
I am trying to find a formula for a vlookup that will check one cell for any value but if that cell has no entry then it will check a different cell to return the value how do i do this?
TEAMCSS Wetherill ParkCT NAME
above is where i need it to look CSS wetherill Park is cell C1 the cell that has no entry is H1, both of these cells have validation lists in them,
OS windows XP excel 2007
View 3 Replies
View Related
Sep 21, 2012
HTML Code: VLOOKUP(M2,'FX Rates'!$A$1:$P$199,2,FALSE)
I have lots of vlookups in my spreadsheet. Match and Index is a better method and should speed up my spreadsheet (1000s of vlookups!).
View 5 Replies
View Related
Jan 18, 2013
I created a workbook called "controlelijst.xls" using Excell 2007. In this workbook i created a sheet that i use as a template, it has conditional formatting all over it. That in fact is not the problem. I copy this template for every new issue i have.
The thing i would like to see happening now is when i enter the value "Y" in cell O10 that the active sheet on wich the value is entered becomes hidden. Because the reason for setting this value is that all conditions are met on this sheet and it does not have to be visible anymore unless i unhide it.
View 3 Replies
View Related
Feb 13, 2011
I am using Excel 2007 on Windows XP professional.
The workbook is called EA.xlsm, and contains dozens of charts, tables and pivot tables - all of which pull their data from external files in the same folder. In case it matters, the folder also contains a Word 2007 document which contains embedded charts form the EA.xlsm file and lays them out for printing.
My problem is that all of a sudden, when I try to open the EA.xlsm file, it gives me two consecutive error messages, as follows:
Microsoft Office has identified a potential security concern.
File path: c:My DocumentsEA.xlsm
Data connections have been blocked. If you choose to enable data connections, your computer may no longer be secure. Do not enable the content unless you trust the source of the file. [Enable] / [Disable]
to which I click enable, and then....
Microsoft Office has identified a potnetial security concern.
File path: c:My DocumentsEA.xlsm
Automatic update of links has been disabled. If you choose to enable automatic update of links, your computer may no longer be secure. Do not enable the content unless you trust the source of the file. [Enable] / [Disable]
to which I also click enable.
Excel then opens, but I just get the program with a blue screen. i.e. it looks like you have opened Excel, but not opened a file yet. However, if I try to close Excel, it asks me if I want to save changes to EA.xlsm, and if I try to open EA.xlsm again - it tells me that it is already open. Also, if I press Alt+F11 to open the VBA console - I can see the names of all of the sheet tabs in the file - but when I close the VBA console, it looks as though I do not have a file open again.
I suspect that somehow, somewhere the file is open, but I dont know what I need to do to be able to see/edit it. Or even worse - if it has become corrupt. It would take me about a month to put this file back together again from scratch.
View 2 Replies
View Related
Aug 24, 2012
I have 3-6 workbooks that I need to merge into one. How can I merge all these workbooks into 1? I am using 2007 excel
View 2 Replies
View Related
Mar 30, 2014
Assume I open with Excel 2007 three different Excel workbooks
excel1.xls
excel2.xls
excel3.xls
How can I switch from one Workbook to another?
I found no "open document" menu where all currently opened excel documents are listed.
The only way I found so far is by clicking on another preview in Win 7 Taskbar.
But I guess there must be a way INSIDE Excel as well.
Where can I find (and click) all open excel workbooks/files?
View 2 Replies
View Related
Jun 12, 2009
Is there to copy my vlookup results into another workbook?
I put together a marco that will select an range and paste it into a new document, however my vlookup results will not copy over.
Is there a way to extract my vlookup results and paste it into another workbook with the enclosed vba code?
Private Sub CommandButton1_Click()
'
' Macro2 Macro
' Macro recorded 4/24/2009
'
Columns("A:E").Select
Range("A2").Activate
Selection.Copy
Workbooks.Add
ActiveSheet.Paste
End Sub
View 9 Replies
View Related
Oct 29, 2013
I have a file that has an original file format .xls
I saved as .xlsx (I am using Excel 2007) with a different name so I could make changes to the new file without changing the original.
That turn off compatibility mode.... but it is still "shared". While it is shared I cannot delete a sheet. In fact, I really don't even want it to be shared. If the file is open, and someone else opens it, I want it to open as "read only". I cannot uncheck the "Allow changes by more than one user at the same time. This also allows workbook merging." checkbox because it is greyed out.
View 3 Replies
View Related
Mar 13, 2008
I have a macro with "ActiveWorkbook.Protect Password:="password"" . It was working fine in excel 2003. In excel 2007, because of this I am not able to run any macro's in the workbook. I am getting a message "The macro may not be available in this workbook or all macros may be disabled. I can see a security warning in message bar saying macros have been disabled, but I dont have have a option to enable the macros.
View 9 Replies
View Related
Oct 20, 2008
The following code deletes a specific connection in a workbook:-
ActiveWorkbook.Connections("text123").Delete
How can I code this so that I can delete ALL connections in a workbook without having to specify the names (as these will always be different).
View 3 Replies
View Related
Nov 24, 2011
Intention is to (automatically) fully protect each completed worksheet/workbook on "save"/"save as" in MS Excel 2007... Is this possible by means of a macro? Which one? Saving in a ".xlsm" format is required?
View 9 Replies
View Related
