In versions prior to Excel 2007, I was always able to copy a chart when I copied a tab. However, when I copy a tab in 2007, the data copies fine, but the chart does not. Something similar happens when I try to move a tab with a chart on it to another workbook.
View 5 RepliesExcel 2007. Basically, I'll be working in excel and all of a sudden, my screen sort of blurs; gets scramble like below. This only happens when using Excel.
Myscreen.PNG
Trying to create a macro to run through the following steps when I select a chart and run the macro:
Paste>As Picture>Copy As Picture>As Shown When Printed>OK
I used the macro record feature and when I enter the shortcut it always returns the same chart. How do I get it to run on whatever chart I have selected instead?
I am constantly using this function to copy charts from Excel into PowerPoint presentations and am frustrated with all the extra steps it takes (versus just Ctrl-C).
I want to copy the header from a previous months report and paste it to a new workbook in Excel 2007. How can I write a macro to copy from a1 to g2, keep the same column width and all formatting, then open a new workbook (trouble now in that I previously selected book1 for the new one but this could chnage), and then paste this to the new workbook, and then save this to a location on my computer? So that's, copy, open new workbook, paste keeping all formatting and values, and then save.
View 2 Replies View RelatedExcel 2007
I have a workbook (book1) that is modifying multiple other workbooks (book2). I need to do a vlookup of a sheet in book1 from a value in book2. I then need to insert the value found by the lookup into G7:H7 (merged cells) of book2.
value is in column B of page "Routes" of book1. Found by value B3:C3 of book2. The vlookup looks in column A of book1. The found value is put into G7:H7 of book2.
In a step by step, to possibly make this more clear:
1) check value of B3:C3 in book2
2) find value in Routes sheet of book1, column A
3) upon match, grab the value of column B
4) insert that value into G7:H7 of book2
[URL]
I have two Workbooks
1. Main (where I have a button and I intent to write code and paste the data)
2. Data (where I have data to be copied)
My code so far
Code:
Sub copy()
Dim wbData As Workbook
Dim wbMain As Workbook
Set wbData = Workbooks.Open("path")
Set wbMain = Workbooks.Open("path")
wbData.Sheets(1).Range("A1:A5").copy
wbMain.Sheets(1).Range("A1:A5").PasteSpecial
wbData.Close
End Sub
In the above code the problem is that the file wbMain is already open and when I try to re-open it gives an error and program crashes and if I do not open the file then it gives me the error and says sub or function not defined as wbMain variable is not set.
Second problem:When an error is thrown or I close my files, I lose all the VBA code and module? strange ! how to save modules permanently? using Excel 2007
Which the best procedure to copy a chart into a powerpoint slide from a excel workbook? So that when I update the chart data in the excel workbook I can update it even in the powepoint slide ....
View 1 Replies View RelatedOk I am using Excel 2007. I want to copy 4 cells from a row on sheet 1 to sheet 2 based on value in first cell in row. Example if cell a13 > 0 then copy row 13, cells b13 thru e13 only to first available row in sheet two but starting from row 12 on sheet two. Because sheet 2 has title information at the top from row 1-12.
I would rather not have to use a button to do it, would like it to do it as data is entered in sheet 1.
I am using Excel 2007
I have a spreadsheet with 1,000 rows in multiple columns
In column "B" i have 8 unique names.
What I am trying to work out is to copy and paste all the rows for each unique name and save in a separate workbook named as the unique name.
I have a macro that exports a row (or rows) to destination sheet ("Amber") based on criteria in Column K. Once exported I return to the source sheet ("Register") and the row that had the data that I wanted exported has exported the info but the row just sits where it was and appears to only 'clear the contents'. The macro I use is:
Sub Extract_FW_Rows()
Set ws = ActiveSheet
endrow = ws.Cells(65000, 1).End(xlUp).Row
For i = endrow To 1 Step -1
[Code] ......
I set up the macro on Excel 2002 in work as thats what we have....however when I input the same code into my home laptop working Excel 2007, all works perfectly i.e. it cuts the data to destination sheet, goes back to source sheet and the rows have moved up accordingly - I do realise that the action taken is a row removal i.e. I had 1000 rows, macro executes, I now have 999 rows in the source sheet.
What I would like is the same result in 2002 as I get in 2007.
I got the following script from another site. What it is intended to do is that it has three columns in a sheet.
Column A = Folder Name
Column B = Sender Name or Mail Subject
Column C = Values for Column B
Based on what values are in Column C (sender name or email subject), it will then look at the mails in outlook within the 'inbox' folder and look for the matching criteria and if it finds a match, move it to the folder named in column A (if folder does not exist, create folder)
Running the script, I get runtime error '438' object does not know property or method - on the line highlighted in red. I am using office 2007 and looking at the code, it is using late binding so no reference library is needed?
Code:
Option Explicit
Const olFolderInbox = 6
Sub moveOutlookMails()
Dim wkb As Workbook
Dim wks As Worksheet
Dim rng As Range
[Code] .......
I have an Excel chart graphing two data records. As the data points cross, one is in "back" and one is in "front". I would like to reverse the current layout. Is this possible?
View 1 Replies View RelatedI am using Excel 2007 on Windows 7 Home Premium 64bit.
My Workbook contains 2 Worksheets, both with the same headings in row 1. Sheet2 is initially empty, except for the headings in row 1.
The following is a sample of the data in Sheet1:
[Code] ......
I want to create a Macro to operate as follows:
In the above sample data, rows 2, 4, and 8 are identical, so I want to copy rows 4 and 8 to Sheet2, and delete them from Sheet1.
Similarly:
Rows 3 and 9 are identical, so row 9 should move to Sheet2;
Rows 5 and 11 are identical, so row 11 should move to Sheet2.
Rows 6, 7, 10, and 12 are all unique, so should be unaffected by the Macro.
New records will be added to Sheet1 periodically, so the Macro will be used each time to move any newly discovered duplicates to Sheet2.
The Macro should make no assumption about how the rows are ordered, and should not change their order.
I have uploaded two Workbooks, such that Workbook1 shows the original data, and Workbook2 shows the result I want to obtain.
Attached Files :
Workbook1.xlsm
Workbook2.xlsm
I'm working in Excel 2007 and need to move data from multiple rows to a single row if the ID matches.Below is sample data I would be working with. I want to move data from columns F-U to the right of the original data in the row above it. I would also like to delete the rows that had data moved.
GIDSurnameNameEmployee Number OriginalDate of birthGranting ARE
Employing ARECountry Employing ARECHCM Supplier IDVehicle
Investmt. shares / Awards at termination dateMatching Shares
at termination dateTermination
[Code]....
i am totally new in excel and i am using excel 2007, my question is : how can i create an object in an excel sheet, so that when the mouse cursor move to it, it pops up anohter image?
View 4 Replies View RelatedMy OS is Windows 7. My version of Excel is 2007. I have read how to get a macro to move around a page in a relative way, but is there a way to move from page to page in a relative way as well?
View 5 Replies View RelatedI have a workbook I update from numerous sources every day. A few months ago I noticed some of my formatting started to disappear - a couple of borders were missing. a day or two later a couple of cells which had color were no longer colored. number formatting reverted to general so my percentages just showed up as decimals and my dollar values no longer had a $ or commas. Eventually - over the course of several weeks - all formatting in the document was completely gone. A couple of times throughout this process I tried replacing all the formatting, but as soon as I'd save the file, close it and open it back up whatever formatting related changes I had made would again disappear.
Eventually I went back a couple months and pulled an old file which still had its formatting and updated that instead. This worked fine... for about 2 months. three days ago I started noticing the same issues - a few borders disappeared in the file. two days ago a few more borders were gone and a couple of cells lost their color. yesterday and today it has gradually gotten worse again.
I am using excel 2007. I have data which, instead of being posted on multiple columns, is all within 1 column. The data most simply has the characteristics of:
AAA
AAA - description
BBB
BBB - description
CCC
CCC - description
and so on..
I would like to move the descriptions from column A to column B:
AAA AAA - description
BBB BBB - description
CCC CCC - description
and so on...
What would be the best way to accomplish this?
I want to copy old worksheet from old.xls (screen 1) to new book new.xls
(screen 2 ) on an extended desktop.
Screen 1 containing old.xls file in originally opened excel.
Screen 2 has new file new.xls in newly opened excel.
Dragging over is unsuccesful.
So is Edit-Move or Copy to new.xls.
I want to use VBA to insert an Organisation Chart in Excel 2007 (ie if I did this manually it would be Insert, SmartArt, Hierarchy), but I cannot find anything on line that shows how to do this in Excel 2007. I know the code for Excel 2003, but that does not work in 2007.
View 4 Replies View RelatedI have excel 2007 and I came across the following difficulty:
If I create a graph (or a chart) the default size is "Letter". However, I can switch this "Letter" to "A4" which I need and then create a template. But I always have to manually choose this template for new charts. However switching this any time I create a new chart is a rather bad way to cope with. Even clicking on set as default obviously does not cause to have A4 size for new chart, it still has got size of Letter when adding a new chart.
I assume the solution could be in XLStart templates, but it probably doesnt work for charts that you add. Or at least I didnt find any clue on the internet for this problem.
I have a Pie Chart that which is updated based on a dropdown list.
The pie chart works fine for all my dropdown options - except one!
Basically, on this particular chart, the entire chart is filled with one colour even though the split is 90/43.
I am using Excel 2007. The options for Fill are set to Automatic & Vary Colors by slice is checked.
I have built a chart using dynamic nameranges. The problem that I am facing is I tested it on two systems . One system the charts works fine but the other system the charts does not work . Both are excel 2007. Now the error that I get is if I see the chart data source from one system it is showing "!". The other file shows the chart data source as "0!". What should I be checking so that it works in the other system as well?
View 6 Replies View Relatedcopying within a workbook...
I have an external .xls file I'd like to copy to a new directory from within VBA. I know how to create the directory, but is there a way to do it other than opening the required file, and doing the " saveas" thing?
Can I just create a copy directly?
I have a line charts with values above and below zero.
Im looking for a way to colour the steps below zero in one colour, and above zero in another colour - without doing it manually.
Using Excel 2007.
I've just switched to 2007 and can't seem to find where they've moved the ability to change the width of bars in a chart. Where is it in 2007?
View 7 Replies View RelatedI have inherited a series of Word reports containing links to charts in several Excel files. I can tell by the link in Word that one of the charts is named 'Chart 6'. Is there an easy way to locate which chart in the Excel file is 'Chart 6' (and on and on for all of the other charts linked in the Word doc)? There are upwards of 21 charts in each Excel file linked to each of the Word reports. I am using 2007 but the files are in 2003 format because of limitations of the program from which the data comes for the charts.
View 4 Replies View RelatedI'm attempting to chart data obtained from our phone system to see when users are logged in/on rest.
I'm using Excel 2007.
The data we extract has:
person | status | start | finish | duration
Status is either "login" or "rest"
Start/finish is time (h:mm)
Duration is a formula (h:mm, finish - start)
I want to have a stacked bar chart that shows when a person was logged in/on rest; one bar for each person.
x-axis: person
y-axis: time (8am - 6pm)
legend: status
The problem I'm encountering is that each person logs in and out multiple times throughout the day (therefore, has multiple lines to their name in the data), and I can't get this information to appear on a single bar for each person.
I've sorted the data into a pivot table which gives me the information I want, but how to get the chart.
Row labels
a. Person
b. status
c. start
Values
Min of duration
Ideally, I would like to avoid using a Gantt chart within cells (as it would involve vlookup/if statements), but am beginning to think that's my only option...
I'm using Excel 2007 and I have a reasonable level of experience with VBA coding in normal / object modules, but I have no experience with class modules or events ... so I do not have a good command on what goes into a normal module vice a class module if I want to use mouse events to rotate a chart.
I am looking to rotate a chart ... Since I am not allowed to post a file, I will give the 3D array here:
1.0000
2.0000
3.0000
4.0000
[Code]...
I have placed into a normal module the following code (based on what I was able to pick up from MSDN):
Code:
Dim myClassModule As New EventClassModule
Sub InitializeChart()
Set myClassModule.myChartClass = Worksheets(1).ChartObjects(1).Chart
End Sub
And I have placed the following code into a class module named EventClassModule (also based on what I was able to pick up from MSDN):
Code:
Public WithEvents myChartClass As Chart
I want to rotate the chart by using click and drag, and, if possible, I'd also like to be able to zoom in and out via some method (say a mouse wheel event).
In the following link, a guy has done a beautiful job of enabling scatter plot rotation using scroll bars, but I'd like to be able to use mouse events instead:
3d scatter plot for MS Excel (VBA macro)
Using Excel 2007: I have a column graph whose numbers/labels on the vertical axis go from ($300,000) to a positive $550,000.
Question: How do I get the labels on the vertical axis to appear in the "accounting format" with the "negative numbers in red" and the "positive numbers in black or blue"?
I have tried to find the answer online and it appears to need to find Format Data Series, which I have been unable to do.