Excel 2007 :: Copy And Paste Pivot Table To Multiple Sheets?
Dec 14, 2013
for my school project, I am right now doing time tracking for all of my activities throughout the day with excel. Here is basically what I am doing: For everything I do, I record and put in start time and end time for the activity.(I use simple formula to subtract these twos) If my day goes on like study, break, study, meal, study, break and each activity takes one hour for each, I have total of 3 hours studying, 2 hours taking break and one hour for meal. I am using pivot table to show all totals for each activity.
Pivot table is working best as far as my knowledge goes as I can choose and look up total of multiple activity combined. The problem here is I am making one sheet per a day and I need to continue this for three months. (So that seems like 90 worksheet). What I was thinking is I make Sheet 1 as master sheet. Then, copy and paste the entire sheet for 90 sheets assuming all formulas including pivot table go along with them. then, when I put in new data to other sheet,magic happens and values in pivot tables will change relatively after refresh. You might be probably laughing hard at me right now. I know..I tried it for like 3 sheets. Simple formula to subtract endtime and start time still work accordingly with new data. But, Pivotal table is playing dead at all.
I researched and found that that might be problem with reference and absolute cell reference thingy. ( to make pivotal table work for different worksheet). All the cells used ( including column and row ) will be entirely the same for all worksheets. The only difference aka problem is different sheet. I want to use sheet 1 as a template and copy it down to next 90 sheets taking all contents except data. Is there anyway I can copy and paste the whole template to another 90 sheets while making pivot table work and calculate and update itself according to relative data from each own worksheet? I use excel 2007 btw
View 5 Replies
ADVERTISEMENT
Jan 10, 2014
I have a perfectly working pivot table and I would like to make some graphs based on the report filter. My report filter has 4 categories, with each more than 10 sublevels.
When I make one pivot graph/chart, this goes fine, the data is ok, and I am happy. But one I make a second, and thus adjust the report filter, the first graphs changes according to the filter. I dont want that to happen
Ultimately I would like a powerpoint presentation with multiple charts, based on one table, with different report filter filters. Updated ONLY on the values, not the filter.
View 4 Replies
View Related
Jun 13, 2014
In excel 2010, I'm using the following to copy and paste values and formatting from a pivot table, but i lose the formatting (TableStyle2 = "PivotStyleLight8"):
VB:
Selection.CurrentRegion.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
I have tried to add, xlPasteFormats, but to no avail...?
View 4 Replies
View Related
Apr 12, 2011
Am working in Excel 07, but this would need to work in 2000 as well.
Need a macro that will...
1. Select a range of cells from B4 to RX. X is defined as the last row where Column A has a value.
2. Copy the visible cells
3. Open an email in Outlook (not via the email workbook function of excel), enter "Submission" into the title, enter "Dear X," insert 2 returns.
4. Paste the copied table (not the workbook, just what is on the clipboard) into the body the email.
View 4 Replies
View Related
May 23, 2013
I want to copy 4 sheets and paste it in a new workbook and save it.
I have this code recorded
VB:
Sheets(Array("PIV", "Report")).Select
Sheets(Array("PIV", "Report")).Copy
But it don't work?
View 2 Replies
View Related
Apr 19, 2013
I prepared a Pivot Table and then i add some data in it but now all data is not showed by Pivot Table.
I do all necessary things like refresh and all but unable to increase a range.
How to increase range for Pivot Table in 2007.
View 3 Replies
View Related
Oct 9, 2008
I have a pivot table in Office 2007. I want to filter the last column such that the values in the data area are greater than a certain number. But all those filter options are grayed out. The only option available (and working) is to select the top n entries. So clearly a reference into the data field to filter a column works, but why not by value?
View 9 Replies
View Related
Sep 26, 2011
I cannot remember how/if I can ALWAYS exclude blank results from my pivot table.
I'm hoping i don't need to use a macro, it should be in the settings for the pivot table, I hope...
I use Excel2007.
View 2 Replies
View Related
Apr 12, 2012
In my data, I have:
1. Age (up to 20, 21-30, 31-40)
2. Gender (male, female)
3. Location (London, Paris, Berlin)
I want to see Age and Gender as column labels and Location as row labels. However, I don't want Gender as a sub-set of Age - I want Age Labels followed immediately by Gender labels ie:
Upto20 / 21-30 / 31-40 / Male / Female
I don't want: 21-30 Male / 21-30 Female / 21-30 Total / etc etc..
Is there a way to specify this in a pivot table?
View 3 Replies
View Related
Dec 10, 2009
In Excel 2003 I created a macro that copied data from a table, pasted into a new sheet, created a pivot table, copied and pasted that data next to pivot table, sorted, copied and pasted into chart data. I've used this macro in Excel 2007 with no problems.
Now I'm trying to create a similar macro but it won't complete the pivot table. My Pivot Table Field List should have the Row Label and Values populated but when I run it all that is populated is the Values field.
Is there something in 2007 that will not allow me to create a macro using a Pivot Table or am I doing something wrong? The code is below if that helps ...
View 9 Replies
View Related
Aug 29, 2012
I would like to know if it's possible to copy a pivot table from one sheet and paste it into in another sheet such that two pivot tables are not linked i.e. if I create a calculated item in pivot table it doesn't show as an item in another. If yes, how could I do that?
View 1 Replies
View Related
Jun 2, 2006
I have a problem in creating Pivot Table in the format that I want for the purpose of report, so I'm not even sure if I should use it at all.
In the file attached, I have a sample data source in sheet 'Source'. Basically the data are already in the list format.
For the purpose of reporting, I want to make this data in the format of sheet 'Final Format Wanted'. Note that the report only takes in data from columns D, M, N, O ( Headings highlighted in red).
(1) I understand that I can do something like this with a Pivot Table, and I already did something like it in the sheet 'Pivot'.
The Pivot table works well for Total Exposure (data from column M)The thing is, I want just the Grand Total Figures for column N and O instead of putting it in the data section itself. For better explanation, please take a look at sheet 'Final Format Wanted'. I just want the grand total for these 2 columns because they are less important and I want to be able to squeeze just the relevant figures for the report. Can I do this?
(2) Another way I have thought of is actually using a combination of Vlookup and concatenate function (look at sheet 'vlookup'). The thing is, some names that I used to concatenate might appear twice (look at row 39 and 40 in sheet 'Source' under column L), so if I am to use this, I'll need to find Sub-total first then copy and paste each item again into the format I wanted.
To me, this seems to be a really long way of doing it. Pivot Table is preferable in that it can count the total automatically for me, but I can't get the format I want.
Does anyone have any suggestion what I can do? If I use
(1)Pivot table - how can I get just the Grand Total of the other 2 columns?
(2)Vlookup - Is there a faster way in getting the subtotal and ultimately get the data in the format I want?
View 4 Replies
View Related
Feb 8, 2011
I have a pivot table that summarizes jobs that need to be completed on a specified date. I need to put that information on a calendar, but I would like to concatenate all information from that date so I can do a vlookup from the calendar. My other problem is that the number of cells change for each date, so I cannot specify exact cells, (some only have 1 entry, but others may have 4 or more). Can I specify a range of cells based on the result of the pivot table?
I have attached the pivot table, calendar and the data sheet with the vlookup info. Am I using the proper calendar or method to find this info?I have struggled with this for over a week now.
View 4 Replies
View Related
Jan 3, 2012
I have created a pivot table using a family name in row labels. The names appear in alphabetical order unless the person's name is the same as a month or day of the week. The result is that I have Mr Sun and Mr May at the top of my list, rather than listed alphabetically. Sorting the list does not solve the problem. It switches Mr Sun and Mr May, but does not included them in the main list. Is there a setting I can use that will stop Excel 2007 thinking that these words are something that they are not?
View 4 Replies
View Related
Mar 19, 2009
I believe that I am finally getting the hang of pivot tables and VBA ... pretty nice. Now for my latest frustration - calculated fields.
I have a pivot table created which compares two years of data. The problem seems to be that this data is from the same data field (PINSAL) even though it shows in two columns (year 2007 and year 2008).
1 - I need to subtract the 2007 figure (column C) from the 2008 figure (column D) in a calculated field called DollarVariance
2 - I need to divide DollarVariance into the 2007 figure to create a calculated field called PercentVariance
This seems easy to do if I had two different variables used to create the 2007 and the 2008 data but it is the same datafield. Can I use column letter? Can I use the column name assigned by the pivot routine (12 - 2007 and 12 - 2008)?
View 9 Replies
View Related
May 4, 2011
I have a pivottable that has a calculated field returning a percentage of two other feilds. I have pivotcharted the result and now want to include a median of the calculated feild results on the same chart.
I want to use a pivot chart as it'll accomodate changes to the data range and different page fields.
using xl2007
View 3 Replies
View Related
Nov 9, 2011
I'm using Excel 2007. My pivot table seems to be limiting me to 256 columns in the Values/Data area. In researching below I believe that I should be able to have 16,000 columns in my Pivot Table.
[URL] The "Big Grid" and Increased Limits in Excel 2007
PivotTables Maximum rows displayed in a PivotTable report is 1 million.
Maximum columns displayed in a PivotTable report is 16,000.
Maximum number of unique items within a single Pivot field is 1 million.
Maximum number of fields visible in the Fields list is 16,000.
View 7 Replies
View Related
Jan 26, 2012
I have a table of data which I am analysing in a Pivot Table. For the majority of the data, the Pivot works very well: however I have a small issue, but it subsequently means the Pivot is useless.
Within the table array that I am referring to, there is a column of data of "Days per employee for a given period". The rows of data within the table array relate to every absence entry per employee, but this final column of data always contains the same figure (although can differ from employee to employee).
When I put the data into the Pivot, I can summarise the absence(s) as a simple sum. However, this final column of data should not be summed, since it is already the sum figure.
This figure though needs to be part of the Pivot, since I need to report on the percentage of absence days per type over the given period. So, the simple representation of =absence day(s)/worked days does not work... well I cannot get it to work. Additionally I have tried features like % of, but nothing.
I am using excel 2007.
View 5 Replies
View Related
Aug 8, 2012
I have a stripped down data source for debugging purposes. I only have 4 rows of data for test purposes. The dates are formatted as dates.
When I create the pivot table the dates become my column values. When I select the first date in the pivot table the Group By Field menu option is grayed out. I tried setting a tabular format but didn't work.
View 9 Replies
View Related
May 31, 2013
In Excel 2007 is it possible to filter the "Values" in a Pivot Table?
I am tracking the Gross weight of shipping containers. My table sums the weight of all items in a container by container number. So my rows are 9 digit container numbers and my data values is a Sum of part weights. I want to be able to filter out containers above a certain weight.
for example:
Row Labels Sum of Gross Wt. - Lbs
10003150588929
10003153258700
10003155984958
1000315651530
10003156549761
I know I can simply copy and paste into a new tab and sort it there, but I'd like to be able to do it internal to the pivot table if that is possible.
View 3 Replies
View Related
Sep 10, 2013
Using Excel 2007 I have a pivot table that counts that number of incidents based on month and year. To get the month and year I group the date field as months and years.
My problem is if I want to filter specfic months in say year 2012 it also takes out the month in 2013. I though it used to give you the option of year and date in the filter but mines are 2 seperate filters.
View 2 Replies
View Related
Nov 16, 2007
my macro pulls download in on sheet1. On sheet2 it makes a pivottable of it with horizontally displayed the suppliers and vertically the codes of products. This is of course dynamic (one month it may contain 10 suppliers + 8 products, other month 15 suppliers + 20 products). On sheet3 is the (static) lay-out of all suppliers and all products. Now, what I want is that all fields <> empty (or zero) from the pivot table are to be copied and placed in sheet3, the 'report' I have to fill in. index and match won't do the job I think.
View 2 Replies
View Related
Aug 19, 2013
I am using Excel 2007 and my version of visual basic is 6.5.
I am baffled by the behavior of this code to manipulate one of my pivot tables. I am trying to set all but one of the pivot items in one of the pivot fields to not visible. Because there is a large number of items, I wish to suspend all automatic updates until all items are properly set to visible or non visible.
------------------------------------------------------
Sub SwitchBoards()
Dim BoardNew As String
Sheets("Board Parameters").Select
' Make sure we get the right value.
[Code].....
The MsgBox returns with: "Manual update is set to False" right after the instruction to set it to True!!
View 12 Replies
View Related
Aug 20, 2008
I am trying to create multiple pivot tables from the same pivotcache using VBA. The data range is approximately 270,000 records with 100 columns. When I run the macro, I get "Run-time error '-2147352567 (80020009)' Method 'Add' of object 'PivotCaches' failed". Is there a size limit on the data? If there is less than 65,000 records, it works great; if I use a wizard, it works with no problems with the full dataset. If I bring the data in as an Access table, it can work with some tweaking of the code, but the size of the file is huge because each pivot is taking its own snapshot of the data. I also can only create 3 tables before it runs out of memory, so I have to stop, save the file, and open it back up to create 3 more pivots.
Dim WSD As Worksheet
Dim PTCache As PivotCache
Dim PT As PivotTable
Dim PRange As Range
Dim FinalRow As Long
[Code] .........
The last line is where I am getting the error. I am running XP, Excel 2007.
As I said, if I import an Access table, I can use the code:
ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _
"Table_Pivot_test.accdb[#All]", Version:=xlPivotTableVersion12). _
CreatePivotTable TableDestination:="", TableName:=txtPivotTableName, DefaultVersion:=xlPivotTableVersion12
And loop, but the final file size with 14 pivots can be 500MB! I have tried both "Create" and "Add", but they both give me errors.
View 8 Replies
View Related
Feb 13, 2012
I am trying to have duplicates and their corresponding data appear in my pivot table. Assume I have a list of over 1000 stores. Let's say store 101 appears twice in my data file.
When I create my pivot, the 101 only appears once and the data is consolidated. Is there a way to ungroup/display duplicates?
View 2 Replies
View Related
Feb 20, 2012
I am looking for a way to extract all of the unique items in a Pivot Table. For example, I have a Pivot Table that has category A items and category B items. There may be several B items to one A. For example:
A0
B1
B2
B3A1
B3
B4
B5
Now, what I need is a list that looks like this:
A0 - B1
A0 - B2
A0 - B3
A1 - B3
A1 - B4
A1 - B5
Formatted so that those are two columns. However, in Excel 2007, I cannot set the option to have it repeat the A series items in the Pivot table. Is there some easier way to do this?
View 2 Replies
View Related
Nov 3, 2012
Excel 2007
No empty rows
No empty cells
No calculations in cells
Field names look fine - no punctuation no merged cells
If I select one column - any single column I can generate a pivot table but not with multiple columns
View 4 Replies
View Related
Nov 18, 2012
I have a set of sales data and need to create a run rate which is simply = Total Sales/Selling Day
Selling day changes most days.
I put the calculation into my pivot data but it's summing up, (instead on 12 I get 720) so I changed this to Average so I get the right figure in the Pivot but when I then use this field, it doesn't use the Average amount, it uses the summed figure.
So what I need is Total Sales/X
X = Cell Reference
View 2 Replies
View Related
Feb 11, 2013
I am using Excel 2007. I have a population that I used to create a pivot table. I am currently double clicking on the value cells to create worksheets of only particular "row label" categories. I am then copying the "row label" information into the newly generated work sheet name tab. This works fine when I only have a few "row label" categories to do but it is tedious if there are many categories.
Is there any way to automate the creation of work sheets for all row label values and also naming each work sheet tab with it's respective row label information. Here are images of the pibot table and the type of work sheet I would like for wall row label values.
View 1 Replies
View Related
Jan 15, 2014
I am trying to create a single pivot table using data from multiple sheets (one per month). I am trying to summarise the headcounts (count of assignment number) by month in a single table and then be able to select single months/areas or combination of months/areas in the same way as a single sheet pivot table. I have managed to get the table part way there but it’s not counting the assignment number and my Jan data is not appearing (see attached). How do I fix this? (I have only used 5 months of year in example due to the large file size) Alternatively is there a different or better way to this other than pivot table?
View 2 Replies
View Related
