I would like to know if it's possible to copy a pivot table from one sheet and paste it into in another sheet such that two pivot tables are not linked i.e. if I create a calculated item in pivot table it doesn't show as an item in another. If yes, how could I do that?
View 1 RepliesI have a problem in creating Pivot Table in the format that I want for the purpose of report, so I'm not even sure if I should use it at all.
In the file attached, I have a sample data source in sheet 'Source'. Basically the data are already in the list format.
For the purpose of reporting, I want to make this data in the format of sheet 'Final Format Wanted'. Note that the report only takes in data from columns D, M, N, O ( Headings highlighted in red).
(1) I understand that I can do something like this with a Pivot Table, and I already did something like it in the sheet 'Pivot'.
The Pivot table works well for Total Exposure (data from column M)The thing is, I want just the Grand Total Figures for column N and O instead of putting it in the data section itself. For better explanation, please take a look at sheet 'Final Format Wanted'. I just want the grand total for these 2 columns because they are less important and I want to be able to squeeze just the relevant figures for the report. Can I do this?
(2) Another way I have thought of is actually using a combination of Vlookup and concatenate function (look at sheet 'vlookup'). The thing is, some names that I used to concatenate might appear twice (look at row 39 and 40 in sheet 'Source' under column L), so if I am to use this, I'll need to find Sub-total first then copy and paste each item again into the format I wanted.
To me, this seems to be a really long way of doing it. Pivot Table is preferable in that it can count the total automatically for me, but I can't get the format I want.
Does anyone have any suggestion what I can do? If I use
(1)Pivot table - how can I get just the Grand Total of the other 2 columns?
(2)Vlookup - Is there a faster way in getting the subtotal and ultimately get the data in the format I want?
my macro pulls download in on sheet1. On sheet2 it makes a pivottable of it with horizontally displayed the suppliers and vertically the codes of products. This is of course dynamic (one month it may contain 10 suppliers + 8 products, other month 15 suppliers + 20 products). On sheet3 is the (static) lay-out of all suppliers and all products. Now, what I want is that all fields <> empty (or zero) from the pivot table are to be copied and placed in sheet3, the 'report' I have to fill in. index and match won't do the job I think.
View 2 Replies View RelatedIn excel 2010, I'm using the following to copy and paste values and formatting from a pivot table, but i lose the formatting (TableStyle2 = "PivotStyleLight8"):
VB:
Selection.CurrentRegion.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
I have tried to add, xlPasteFormats, but to no avail...?
for my school project, I am right now doing time tracking for all of my activities throughout the day with excel. Here is basically what I am doing: For everything I do, I record and put in start time and end time for the activity.(I use simple formula to subtract these twos) If my day goes on like study, break, study, meal, study, break and each activity takes one hour for each, I have total of 3 hours studying, 2 hours taking break and one hour for meal. I am using pivot table to show all totals for each activity.
Pivot table is working best as far as my knowledge goes as I can choose and look up total of multiple activity combined. The problem here is I am making one sheet per a day and I need to continue this for three months. (So that seems like 90 worksheet). What I was thinking is I make Sheet 1 as master sheet. Then, copy and paste the entire sheet for 90 sheets assuming all formulas including pivot table go along with them. then, when I put in new data to other sheet,magic happens and values in pivot tables will change relatively after refresh. You might be probably laughing hard at me right now. I know..I tried it for like 3 sheets. Simple formula to subtract endtime and start time still work accordingly with new data. But, Pivotal table is playing dead at all.
I researched and found that that might be problem with reference and absolute cell reference thingy. ( to make pivotal table work for different worksheet). All the cells used ( including column and row ) will be entirely the same for all worksheets. The only difference aka problem is different sheet. I want to use sheet 1 as a template and copy it down to next 90 sheets taking all contents except data. Is there anyway I can copy and paste the whole template to another 90 sheets while making pivot table work and calculate and update itself according to relative data from each own worksheet? I use excel 2007 btw
When I filter my pivot table and I click on the button. The Filtered pivot table will automatically be copied to another sheet.
View 4 Replies View RelatedI have a very complicated table that has a bunch of links to other cells on the sheet. I would like to duplicate this table onto another sheet in my workbook. However, when I try to do that, the links also change when I paste it on the new sheet. Is there a way I can keep all of the links to the original page after I have pasted the table on the new sheet?
View 4 Replies View RelatedI have a sheet in which you enter in new information. I need a macro to copy that information onto another sheet, onto the first empty row, so it does not clear the information that has already been entered. The first sheet is an information entry sheet, and the second is the database, which contains all of the information. I hope this is clear, if you do not understand, I will be happy to rephrase my question!
I have included two screenshots of the excel system. They are named.
Recently, the boss showed me a Pivot table & chart, which consists of a list of about 30 user names in the first column. The row headings were the different items they purchased from a vending machine. & when he clicked on any name in the first column, this created a new sheet, renamed with users name, with a small table of results showing what that person purchased.
Problem is, none of us can figure out how to do this. I have created a new Pivot table & chart exactly like the original, but I cannot get the smaller sheet to generate. (Excel 2010)
Excel 2007.
I have a workbook with a sheet per day, each sheet has a variety of 'jobs' as columns and a variety of people and kit as rows. Hours are manually input each day during the month.
Simplified version... These are two separate sheets 'M060114' and 'Tu070114'.
Monday
Dig
Drive
Dave
4
5
Bill
2
7
Tuesday
Dig
Drive
Dave
2
7
Bill
8
1
I have a Pivot Table on a separate sheet. This was created using the Wizard (ALT +D +P).
Dig
Drive
Dave
6
12
Bill
10
8
So far, lovely.
But when I double-click on a number or right-click and choose 'Show Details' I don't get the sheet names in the newly created information sheet. I get the Row label, column label and a list of the entries.
So if I clicked on 10 above...
Row
Column
Value
Bill
Dig
2
Bill
Dig
8
That's fine with just a couple of entries but with about 80 columns and 250 rows spread across a month, therefore 30ish sheets, it's difficult marrying up the 'Show Details' sheet to the actual data.
So after all that, the question. Is there a way of getting the sheet name to appear in the 'Show Details' information sheet?
I've been working on a macro that makes copies of a template sheet based on a table in my Opps sheet. If column B isn't empty, make a copy of the template sheet, rename it to Opps column A, and then hyperlink column A's current A.row to the newly copied and renamed sheet.
I'm not sure what is wrong exactly, it keeps making duplicate Template(x) and stops renaming them, and the hyperlinks are not working. -This is my first go at VBA hyperlinks to internal workbook sheets
[Code] .....
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI am trying to run a macro on a few items(24) in a large pivot table(6000). How can I run through a list, one at a time and then run another macro?
Here is what I have:
Sheets("Random Demand").Select
Range("O1").Select
ActiveCell.FormulaR1C1 = "D12549.256"
Sheets("Item Lookup").Select
ActiveSheet.PivotTables("PivotTable1").PivotFields("ITEM_NUMBER").CurrentPage _
= "D12549.256"
Run other code here, then loop back and choose the next item on the list
The problem is the ActiveCell.FormulaR1C1 = "D12549.256", the range if cells with the items I need to use is Range("O1:O24"), that is what I want to use since the data will change and needs to be dynamic.
Need to know how to copy a pivot table and paste only the data and formatting of the table, but not the whole pivot table. So I'd be leaving the links to the original data behind. If I do it manually I can copy my pivot table, do a PasteSpecial Values, then do a PasteSpecial Formats. Any idea how to do that via VBA?
View 6 Replies View RelatedIn a sheet (4) I have a pivot refreshed by a VBA macro code. Since I have defined a Chart on this pivot, I need to copy this pivot in a new sheet to avoid to reduce rows using a filter of the Chart. I copy this pivot using this VBA code
Sheet4.Select
Sheet4.Copy After:=Sheet2
I have e new sheet with a number Sheet(n) not equal to maximum sheet number +1
For a new run of the VBA macro I need to delete this sheet
Sheets(n).Select where (n) is not = maximum sheet number +1
ActiveWindow.SelectedSheets.Delete
Then I need to avoid the message box where I need to confirm to delete the sheet because the sheet is not empty.
Is there a solution to copy a pivot in a new sheet replacing the previous pivot and vithout changing the number of the sheet?
I'm looking for a VBA that can copy a PivotTable to my workbook. The PivotTable is at another location. When I open my workbook, this VBA must replace the old PivotTable by the most recent PivotTable. How do I do this with VBA?
View 1 Replies View RelatedI want to start copying at a cell that contains the word "Vehicle" that is in the middle of a pivot table and copy until the end of the pivot table but I don't want to copy anything before it. How can I word this to in VBA?
View 1 Replies View RelatedI want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
On a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies View RelatedI need to copy certain values of multiple pivot tables of different worksheets into a new worksheet.
To be more clear I attached an example worksheet:
In "Sheet1_pivot table" and "Sheet2_pivot table" I have two pivot table with data divided by Area, Year, quarter and month.
In "Table" i have a summary table where, depending on the values of cell B2, B3 and B4, the summary table has different values copied from the 2 pivot tables.
I was thinking of a code like this but i have problems getting the values from the pivot tables
VB:
Sub else_if()
If Range("B2") = "North" And Range("B3") = "October" Then
ElseIf Range("B2") = "South" And Range("B3") = "October" Then
Else
.
.
.
.
Else
MsgBox ("Area not present")
End If
End Sub
In Excel 2007, is it possible to copy & paste a pivot table, and have the result look like a pivot table, but not actually be a pivot table? I want to keep the values and the formatting (the colors and borders, etc) but I want it to not actually be linked to the data or have the ability to change with dropdowns, etc. I've tried the usual copy & paste special (values) thing, and the other otions in the paste special box, but it doesn't keep the formatting.
View 10 Replies View RelatedI have a pivot table that I need to copy only certain regions from the Report Filter on a frequent basis. For example, in the Report Filter, I have 18 total regions, but I only need to submit a pivot table for only 6 regions on a weekly basis. Currently, I'm filtering the 6 regions individually from the "data dump" and making 6 pivot tables as separate workbooks...and then emailing them out. I need to make the underlying detail available for each location that is getting their "report". I have the code for emailing a single worksheet from a workbook so, at least, I have that little tidbit taken care of.
View 2 Replies View RelatedI'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
Everything seemed to be working until i tried to copy and paste something on my spreadsheet (sheet titled Input Sheet). When I paste anything onto this sheet I see the Paste happen and then Excel just hangs (no errors?). I just left it for over 5 minutes and nothing happened (still hanging). I had to close it down using X
I have LOTS of different codes and different sheets in my spreadsheet. I was wondering if anyone knows how I can go about Pinpointing the problem. Chances are no one will be cutting and pasting but I would like to know why this is happening but have no idea how to go about investigating?
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies View RelatedWhen I creating a Pivot Table Report on a different sheet. I have attached the Stock Report, where I have created a Button at the top to create the report, but the worksheet name is the default Excel name rather than the one that I want (in my case the name of the new sheet should be "Admin".
View 3 Replies View RelatedI'm getting a 1004 run-time error when creating a pivot table.
I believe this happens because I'm creating it in a hidden sheet. When I unhide it no errors occur.