I want to copy 4 sheets and paste it in a new workbook and save it.
I have this code recorded
VB:
Sheets(Array("PIV", "Report")).Select
Sheets(Array("PIV", "Report")).Copy
But it don't work?
I have managed to pull together code that does the required task - save two sheets from a work book in to a new workbook on to a dorectory each day. However I woul;d liek to paste special the values and cannot figure our how to reference that on the below:
'saves text file in day on day folder
Dim WS As Worksheet, CheminDest As String, fNAME As String
'create directories as needed
On Error Resume Next
CheminDest = "T:DMRatesReportsChecks" & Year(Date) & ""
[Code] ..........
I am using Excel 2007
I have a spreadsheet with 1,000 rows in multiple columns
In column "B" i have 8 unique names.
What I am trying to work out is to copy and paste all the rows for each unique name and save in a separate workbook named as the unique name.
I am looking for either formula which will allow me to copy data from a workbook with multiple named sheets into a workbook with a single named sheet. For instance workbook 1 has sheets named bob, sue, and tom and there is a workbook 2 which only has sheet bob. I want to copy the range fo data from sheet bob in workbook1 to workbook 2 as long as workbook 2 has sheet bob.
View 2 Replies View RelatedI have a macro that takes info/data from multiple sheets in the Basin workbook and summarizes it into the Median Database workbook. I need to copy the values in range B5:EM5 in every sheet (each sheet name is site #) in the Basin workbook and paste that range into the median database workbook row with the corresponding site.
Here is what I have so far
VB:
Sub Median_Database()
'This Macro takes the median from each station tab in the current Basin workbook
'And inserts it into the Median Database workbook
[Code]....
how to grab the sheet name and insert it in the median database. The problem is the copy/paste of the range in each sheet. The macro locks up every time.
I have 8 different files all have a set of data in them
each one has a long list of (column a-n) however the number of rows change by date. I need each file copied into the finalfile.xls one after another. in the files that will be merged into the final file the final row i need copied is blank.
I have all the copy formulas and everything set, I just need a range to copy that automaticaly takes cell a10 to the first blank a cell from each file and pastes it in the finalfile.xls under the last paste so they dont over write each other.
for my school project, I am right now doing time tracking for all of my activities throughout the day with excel. Here is basically what I am doing: For everything I do, I record and put in start time and end time for the activity.(I use simple formula to subtract these twos) If my day goes on like study, break, study, meal, study, break and each activity takes one hour for each, I have total of 3 hours studying, 2 hours taking break and one hour for meal. I am using pivot table to show all totals for each activity.
Pivot table is working best as far as my knowledge goes as I can choose and look up total of multiple activity combined. The problem here is I am making one sheet per a day and I need to continue this for three months. (So that seems like 90 worksheet). What I was thinking is I make Sheet 1 as master sheet. Then, copy and paste the entire sheet for 90 sheets assuming all formulas including pivot table go along with them. then, when I put in new data to other sheet,magic happens and values in pivot tables will change relatively after refresh. You might be probably laughing hard at me right now. I know..I tried it for like 3 sheets. Simple formula to subtract endtime and start time still work accordingly with new data. But, Pivotal table is playing dead at all.
I researched and found that that might be problem with reference and absolute cell reference thingy. ( to make pivotal table work for different worksheet). All the cells used ( including column and row ) will be entirely the same for all worksheets. The only difference aka problem is different sheet. I want to use sheet 1 as a template and copy it down to next 90 sheets taking all contents except data. Is there anyway I can copy and paste the whole template to another 90 sheets while making pivot table work and calculate and update itself according to relative data from each own worksheet? I use excel 2007 btw
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
I have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.
I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.
I would like a macro to be able to save 26 tabs within the one document to individual PDFs.Preferably I would like to be able to specify each time exactly which tabs get printed, because often I don't need to print all 26, just the first 10 or so.I would like each PDF to automatically be named with the value in cell E10 of each tab.E10 already has a formula to create its final value. It references cells from other tabs within the same document. Hopefully the fact that this cell has a formula in it won't affect my ability to use the resulting value as a 'save as' reference?I would like it if the PDFs save to the same location as the Excel sheet from which they're generated is located. The location of the excel sheet will change every three months, so I'd prefer not to specify a location with a specific filepath, as it will have changed by the time I run the macro again.
I am using Excel 2010.
I have a workbook open, and want to copy and paste various items to three different sheets in another workbook.
When it comes to pasting the data however i am getting the error "Run-time error '13': Type Mismatch"
VB:
Sub BR_0153()
Dim Inv As Workbook, BR As Workbook
Dim RR As Worksheet, LH As Worksheet, IP As Worksheet
Dim LastRow As Long
Set Inv = ActiveWorkbook 'sets current workbook as Inv
[Code] .....
I've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then
Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"),
Sheets("Sheet1").Range("C7").End(xlDown)).Copy
Sheets("Sheet8").Range("A5").End(xlDown)
End If
[Code]...
I would like to create a formula on sheet 1 and be able to copy and paste it to 20 sheets in the same workbook.
View 2 Replies View RelatedI am looking for a code that would copy the data from each worksheet in a given workbook and then paste to just one worksheet within a different workbook. The Sheet names are auto generated when I run this canned report but the naming structure is always the same...the first worksheet is named Repair Details and then the next sheet is named Repair Details_1, the next sheet is named Repair Details_2 and so on for every sheet in workbook. So I would like to copy all of the data(Headers to last cell) and then paste in a worksheet(ex: Master Repair Report.xlsx and the worksheet could be titled Master Repair Details) on a different workbook, then the next sheet would copy from the one under the header to the last record and paste to the same workbook. This process would repeat for every worksheet in the Repair Details Workbook and paste to Master Repair Details worksheet in the Master Repair Report workbook.
View 4 Replies View RelatedI have a folder containing 40 single sheet excel workbooks and I would like to automate following tasks:
- Open each excel file (need to open the file so as to update it since it gets the data from another workbook through =formulas)
- Copy paste as values
- Save this as excel html in the same folder as original excel files (keeping the original file name)
- Close (original excel file should not be changed ie formulas should remain in place, only the html file will contain values)
- Since there will always be xHtml files with same name need the macro to replace the excisting file
My abilities with excel are limited to functions, no VBA knowledge other than finding ready codes and pasting them in the module.
Since this routine is to be run almost daily the macro should run all files, instead of one by one.
I just hope that I am not asking too much for excel to handle and I hope that explanation is clear.
I have multiple .xls sheets in a folder. C:Documents and Settingsu369875DesktopProject stuffTestin Save_ASCompleted History. And need to copy the data in all of them and paste them into a new sheet (one main sheet) in this folder...........
View 2 Replies View RelatedCopy and paste the data from different excel sheets to one main sheet.
I will get a file which may contain 10 sheets or 15 sheets depends on data and rows also not sure it varies from sheet to sheet. Now, I would like to consolidate all the sheet data except first row (heading) for first instance I need heading and second sheet onwards not required the headings hence, macro should copy from second row onwards.
The data should get paste one by one if first sheet contains rows till A100 then in main sheet for second sheet data paste should happen from A101.
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
=SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$R1"),2*(AND("'"&$H$1:$H$43&"'!$E1">"'"&$H$1:$H$43&"'!$F1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$S1"),2*(AND("'"&$H$1:$H$43&"'!$G1">"'"&$H$1:$H$43&"'!$H1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$T1"),2*(AND("'"&$H$1:$H$43&"'!$I1">"'"&$H$1:$H$43&"'!$J1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$U1"),2*(AND("'"&$H$1:$H$43&"'!$K1">"'"&$H$1:$H$43&"'!$L1"))))
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background:
-- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook
-- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing.
In the entire workbook, I want to add 1 (counting function) only when:
R1=2 AND E1>F1 or
S1=2 AND G1>H1 or
T1=2 AND I1>J1
U1=2 and K1>L1
on each appropriate sheet in the workbook.
I am looking for some code to copy the exact values in a couple sheets over to a new workbook. There are images in the sheet that need to come over and formatting of cells including merging.
View 2 Replies View RelatedI am trying to create a macro to copy a set of datas in a row , paste into another workbook (specific sheet),then save it as one of the datas that was copied over.
Workbook1
Ticket#
Description
Name
12345
Test 1
David
32145
Test 2
Steve
Workbook2 - sheet (ABC)
Copy row 2 from Workbook1, paste to row 1 in Workbook2 sheet(ABC)12345
Test 1
David
Saveas Workbook2 - ABC - "12345" - Ticket #
Copy row 3 from Workbook1, paste to row 1 in Workbook2 sheet(ABC)
And so on. I will have a set of data to trasfer to Workbook2, each row different workbook.
I Have a spreadsheet in which data is spreading into column A-Z. I would like to disable copy, paste, ^V,^R,^C, ^D for certain columns (Q-U) of the workbook so that user is forced to enter data manually on these columns.
Is there any simple of doing this using VBA.
Following problem:
I have a workbook containing data about some students grade on different sheets (4). The structure is almost the same on every sheet:
The first 2 row contain headers the each row contains a name and result for different test:
name - test A - test B - ...etc.
Peter - 90 - 60 -....etc.
there are 25 columns on each sheet - 4 sheets in all.
What I want is, to consolidate each students results in a separate workbook.
how to loop through workbooks in a certain directory and copy the rows in sheet1 where column B contains numbers greater than zero, and then pasting them into a new master workbook. The sheets will be named differently each week but will always be in the same directory.
View 4 Replies View RelatedI want to write a macro that will copy data from all worksheets of a specified workbook and copy them into a new workbook.
To give some detail, I receive a report each morning containing failed deliveries. I also export a list of failed deliveries from a system (SAP). These reports rarely match so I must compare the two daily. I do this using INDEX and MATCH functions but now my boss wants all the data in a single report so I would like to harness the might of vba to consolodate all the data in one workbook.
The lists of failed deliveries are contained in worksheets marked mon, tue, wed... so I need to search all worksheets for all delivery numbers and copy all of the data into a new book. This becomes complicated because on Monday there is only one tab marked mon, on tuesday there are two (mon & tue), one wednesday there are three and so on.
I have started on some code but I am getting nowhere fast. I have managed to muster an input box which asks for a date (this will be used to search the file path for a file named "failed deliveries & "mm/mm/yyy")
I have a workbook with many sheets labelled as mmm-yyyy. The constant columns in all the sheets are C,E,R,T, and U.
Is it possible to have a macro do the following: Add a sheet called Summary at the end of the workbook. From the last sheet of mmm-yyyy, copy columns C, E, and R to the Summary sheet. Copy columns T and U from all the other mmm-yyyy sheets to the Summary sheet. All the cells need to be centered.
I am using Excel 2007. I'd like to merge multiple sheets (about 13) into one workbook. The sheets are placed in one folder, and they all include 2 sheets, - only the first sheet should be merged into the final workbook.
The sheets will be updated every 3 months and merged again (-thus replacing the old data).
I'm using Excel 2013 on Windows 7.
I have an Excel file which has a macro that sucks in data from a number of separate files (two Excel, a varying number of csv). The macro grabs all the individual files and loads them into one of three worksheets with some formatting, sorting, and structuring on the way. All good so far.
I then need to take two of the worksheets and copy them to a new Workbook which I can send out to some users. So I use the Workbooks.Add method, and use the Selection.Copy on just the data (UsedRange.Rows/Columns.Count to ensure it is only the data) and Selection.PasteSpecial with the xlPasteColumnWidths, xlPasteValues, and xlPasteFormats options to copy the data over. None of the data is filtered. Just straight data.
I would expect the newly added workbook to be smaller than the one with the macros because the one with the macros has two extra sheets that I don't transfer, and the sheets I do transfer are identical.
And that's where it gets weird. The file with the macros and more data is 18.7Mb, but the new one with only two sheets is 24.8Mb. One is .xlsm and the other is .xlsx (because it has no macros).
I've tried opening the new workbook and saving as .xlsm (no material difference to the size) and as .xls (it got even bigger). I've opened the new workbook, gone to the end of the data and deleted all the blank rows and columns, but no effect (because the rows are already empty).
Why would the file with less in it be so much bigger (or bigger at all)?
Copy over data from different workbooks and using paste special values to paste it into a new workbook using a macro. Here is what I have and what I am looking for:
My file path is
C:Documents and SettingsMy DocumentsProjectCostsDecember12
In this folder I have workbooks called:
Function1
Function2
Function3
In each workbook I have 4 worksheets
Cashable12-13
NonCashable12-13
Total12-13
GrandTotal12-13
I also have a workbook called DecMonthlyTotal in the same folder with the same named worksheets.
I am looking for a macro to be placed in the DecMonthlyTotal that will pull the data from the Cashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name Cashable12-13, it will also pull the data from the NonCashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name NonCashable12-13
Both the Cashable12-13 and the NonCashable12-13 have Columns A - G The row that the macro should start the copying from is Row 3 for each of the workbooks; however I don't have an end row for the workbooks as this will vary.
I am using Excel version 2003.
I have what is probably a simple request to all the VBA experts out there, and simply want to take a template sheet in a workbook and copy it across to 100 sheets numbered/named 101 -200, and add the name of each sheet as a text reference, e.g. sheet name 101 will have a cell within the worksheet that refers to sheet 101.
I have attached a simplified spreadsheet which indicates what i'm trying to achieve.
I have one master excel file (masterexcel.xlsx) and 100 small excel files. The small excel files are saved as M30.xlsx, M31.xlsx, M32.xlsx, M33.xlsx, M34.xlsx....
I want to open the M30 file, copy a certain section and paste it into the master excel file, close the M30 file whilst saving the new information in a file called recording. Then open the next file which is M31, copy a certain section and paste it into the master excel file, close the M31 file and then open m32 and so on....
How do I create a loop for the files so it automatically opens the files in the order M30, M31, M32.......and performs the aforementioned actions.
I have attempted the following for m30 but i need to make it a loop for m31, m32, m33, m34, 35 and so on....
[Code] .....