I'm trying to update a the summary sheet that will run through the 10 worksheets and bring back the entire row (or the columns I specify) that matches the creteria MS.
MS will appear against each row in the same column in all the tabs.
So in the summary sheet I would see all the rows individually that appear in tabs 1-10.
Excel 2007.
I have a very large table that I want to be able to summarize neatly and columns that have zeros for a specific person, so its easier to input data later.
View 1 Replies View Relatedexcel 2010. This workbook has 4 worksheet(Process Engineer,OSBL,OSA,Lab Operator) I want to know what is the best excel formula/function to summary this 4 worksheet.
Example:I want a formula/function to summary all the statement from 4 worksheets and total number of answer "1" per statement from 4 worksheet.
Sample Statement below
"Demonstrate Interpersonal (People-to-People-) Skills" Question:What is the formula if above statement contains this statement in 4 worksheet?As i checked the total is 4 then What is the formula to get all total answered ICC on this statement from 4 worksheet?
I am using Multiple worksheets ( 30 to 35 ) of same format to calculate Individual scores of an event. Each sheet contains Participant Name in C4 and Score in E 21.
Macro to provide a summary sheet which returns C4 & E21 in all the sheets..
The score in E21 is calculated thru another macro done with excel recording feature..
I have a workbook with 4 sheets and with sheet 5 as a "consolidated" sheet. I have to create the macro, which will on a daily basis copy the populated data from those 4 sheets and paste into the sheet 5 (same workbook). The data in the Sheet 5 should be pasted from row 2 below each other.. Row 1 will be the headings and shouldn't be replaced. The data in all 4 sheets should be copied from row starting 37, columns C to BA but it will end with different row numbers. note that columns A & B are populated but shouldn't be copied.
View 7 Replies View RelatedTrying to create a macro to run through the following steps when I select a chart and run the macro:
Paste>As Picture>Copy As Picture>As Shown When Printed>OK
I used the macro record feature and when I enter the shortcut it always returns the same chart. How do I get it to run on whatever chart I have selected instead?
I am constantly using this function to copy charts from Excel into PowerPoint presentations and am frustrated with all the extra steps it takes (versus just Ctrl-C).
"How to create a 'main' macro to control other macros within a workbook". I have my individual macros created. There's one macro for each sheet that searches online data and returns the information. I have one of these per sheet (a total of 20 sheets) since I couldn't find a way to have all 20 macros be on one sheet and still work. My trouble is that whenever I'm on my 'main' sheet and try to run the macro which applies to a 'secondary' sheet, I get an error. I have to select the sheet first, then run the macro and it works. Below is the macro on each sheet.
VB:
Sub Holding1()
Dim DataSheet As Worksheet
Dim EndDate As Date [code].....
I need to create a macro that will scan a spreadsheet for the number of sheets and then pull data from the same places on each sheet in order to create a summary sheet. Let me try to explain a little better.
The spreadsheet I'm working with has a separate sheet for each new deal our company makes. Each of these sheets is in the same format - we use a template and fill in the data based on that whenever a new deal emerges. The sheets contain basic info about the deal in the first few rows and columns, then some narratives with dates describing the progress of the deal, and then a list of issues and whether or not they have been resolved. The problem is, each of these sheets contains too much info for a quick, high-level overview with the bosses so they've asked me to create something that will pull the basic info, the most recent narrative, and any unresolved issues from each sheet. This way, each time there's an overview scheduled with the bosses, the macro can be run and it will create a new sheet with data from each sheet in the workbook.
I need a formula to automatically change the summary column according to the month we are in.
Ie:
Last Months Data
Nov
Dec
Jan
Feb
1
8
1
7
4
7
9
2
9
'Last Months Data' column should show Dec. However, as we move into February and I complete the 'Jan' column, I would like 'Last Months Data' to automatically change to show Jan's data - is this possible?
I was previously told to use the following formula but this would automatically select the current months data and not the previous months data which is what i need - =INDEX(B2:L2,MONTH(TODAY()))
Code:
Date Jan-14..........Jun-14............Dec-14...........Jan-15..........Jun-15............Dec-15
Measure1
Measure2
Measure3
Code:
Date 2014 2015 2016
Measure1
Measure2
Measure3
I have two tables, examples above In the first table, Jan-14 is a dropdown value that updates all the values to the right by a month increment when a specific date is selected
I then have some code that populates the cells which have 2014,2015,2016 in them.
What I need to do next is populate the 2nd table with values based on the date ranges in the above table.
How I can have a summary sheet that takes a number from the same cell on each sheet in my workbook and display it on the summary sheet in a list. one for each sheet.
And is it possible to create a summary page that automatically updates every time I create a new sheet? (adds the name of the sheet to the summary list (alphabetical order) and the value of the specific cell)? Excel 2007
I am trying to create one Excel file for accounting purposes. Within this file I want to create a worksheet for each customer I have in my store. On this sheet I want to list my costs and their payments. I would like to then create a summary sheet which adds all of the individual customer sheets together. Now this is easy to do manually, but what I need to create is an automation (Macro I assume) that does the following:
I add a new sheet and name it after the new customer. The Macro automatically adds that sheet into the formula for the summary sheet. This way may secretary only needs to activate the macro, which will copy a sheet and automatically update the summary page to include this newly copied sheet and all its information. Now the process for automating projected costs and profits is very easy and requires nothing more but to activate the macro.
Trying to write a macro so that my summary worksheet will auto populate when new sheets are added and filled out. I want the PO#, Quanity, Date ordered, Vendor, Subtotal, Tax and Total all to transfer from worksheets like F001 to the summary sheet. Yes there is only one F001 sheet filled out but that number will rise into the hundreds as the project progresses. No idea where to begin when writing this macro.
View 1 Replies View RelatedI have 9 sheets of sales data, some with over 50,000 records. I need a way to present this information in another worksheet so I can bring up just the data based on individual brands. I understand a pivot table is needed however I cannot see how to gather data from multiple worksheets.
For example:
I need to look at all the different sales for Product A, which appears in multiple worksheets. Product A is broken down to store-level, with records for number of sales in each store, one record for units and one for value (for the same store and product). Is there a way I can get the data for all of Product A in one worksheet so I can then easily add the totals across all stores by both units and value?
E.g.
Store 1 - Product A - 10 units
Store 1 - Product A - £20
Store 2 - Product A - 7 units
Store 2 - Product A - £14
I'm trying to convert the values entered by users into specific cells into a specific percentage. When I use this macro in Excel 2010, I can enter the value to be calculated directly into the cell and the macro runs automatically. When I open the file in Excel 2007, the macro does not calculate properly unless the value to be calculated is entered into the formula bar.
For example, in Excel 2007, if I enter '30' in cell E11, it should come out as '20%'. Instead it comes out as '0.2%' unless I enter '30' into the formula bar, which then calculates properly. It is far more efficient to be able to enter the value directly into the cell.
[Code] .....
I have a series of macros I have built to automate some report manipulation at my office. One of the macros I built inserts formulas into specific columns. When I run this macro, all the formulas, save one, are populated perfectly into the column they need to be in. This particular formula is swiched over to R1C1 Reference Notation.
In the workbook I built the macro in, it inserts the formula in the correct notation. When I run the macro in a different workbook, this one formula is converted to RC Notation and then is displayed as text (since the workbook is not set to the R1C1 Reference style option).
Is there a bug in my VBA code? If so, how can I correct this?
I use Excel 2007. Macros are saved in my Personal.xlsb workbook. All other forumlas populated by the macro work correctly.
I'm looking to create a summary sheet of all data consolidated to one tab.
On the attached workbook, I want to pull all of the data from the monthly tabs and consolidate it all to the 2012 Totals tab.
How to only pull the nonblank rows, and ignore the headers.
I would like to be able to avoid using a macro for this, if at all possible. I would like for the summary to update dynamically whenever new data is added to any of the monthly tabs.
Link to spreadsheet
I want to copy all rows that have a value in say colum B from differenct worksheets to a summary sheet, it should stop when there is no data in colum B and then go to the next sheet.
The macro that I use to copy the date from sheets to a summary sheet:
-------------------------------------------------------------------------------------------
VB:
Sub extractCells()
Dim ws As Worksheet
i = 0
For Each sh In ActiveWorkbook.Worksheets
If sh.Name <> "Summary" Then
sh.Range("C3").Copy
[Code]....
I have attached a test workbook excel 2010 (ignore ref# errors, I've cut the workbook down for uploading purposes) What I would like to do is have a 'Button' on my 'information Sheet' which when clicked would clear certain cells. I have searched the forum but can't find a solution, everyone seems to want to delete rows or columns but I just want to clear certain cells. The workbook will have 11 sheets each named 'caravan 1' through to 'caravan 11' The uploaded test workbook only only has 3 sheets.
On 'caravan 1' (which is slightly different to the other 10) I want to clear the content of cells
B4 & B5
C4, C22 & C41
D4 & D5
E4,E5, E22,E23,E41 &E 42
On all other 'Caravan sheets' I want to clear the contents of cells
D4 & D5
E4, E5, E22, E23, E41 & E42
It would be icing on the cake if it could give a warning such as " are you sure you want to clear these cells" but that isn't really necessary. The worksheets will be password protected, but the cells mentioned above will not be. If it proves too difficult to clear all the cells on all the sheets with one click, then perhaps a simpler solution might be to have a button on each sheet instead
I have a 5000 line table I am filtering by a few columns, and I'd like to calculate an exponential trendline value.
=INDEX(LINEST(LN(R1059:R1167),W1059:W1167),1)
But I actually don't want all the values from R1059 to R1167 - I want to select only the displayed values (R1059, R1068, R1077, etc). Is there a way to select only display values to use in a formula? The problem is it would be a lot of manual work to select them all - there are 50 or so instances I would have to select 13 manual values.
I am using Excel 2007 on XP.
What i have is a workbook that can have multiple sheets. Sheet 2,3,4 (if there are) are a continuation of sheet 1. First 2 rows of sheet 1 are headers and the last row of the last sheet (can be 2,3, 4....) is a footer. There are 14 columns (A-N) in each sheet. Col "N" has set status and col I has set names.
What i am looking for is a macro that can perform the following actions in the the set order:
1) deletes all rows where status in col N is "closed"
2) delete all rows where name in Col I is "Many"
3) if there are multiple sheets copy all data in 1 sheet once above 2 are deleted
4) I want to update cell A2, C2, I2, M2 & N2 with Hostel, Direction,Name,Flight & Status respectively
5) Create a pivot table with all data (Col A-N & Row 2 to last) in a new sheet and call it Summary - Pivot
I can then manually select how the pivot will look
Currently i am going through all sheets manually and filtering data. Using excel 2007
Currently I am using Excel 2007. I want to merge data of alternate row of a particular column in Excel.Also i want to remove merged row. E.g.
Name City Pincode
John Mumbai
John 400009
Carol Delhi
Carol 110001
Carol Pune
Carol 411079
I want output to be ----->
Name City
John Mumbai-400009
Carol Delhi-110001
Carol Pune-411079
macro/formula for the above requirement..?
I have a VBA macro for Excel 2007 below that loops through a workbook and deletes a picture (shape) in a range at the top of each worksheet.
The macro works fine until a cell which contains a seemingly unrelated data validation list on Sheets(1) is changed. The macro then repeatedly trips up with a 'Run-time error 1004 - Application defined or object defined error'.
The cell with the data validation is outside of the range in which the shapes are deleted and does not set any of the variables in the macro.
Sub DeleteLogos()
Dim Count As Integer
Dim NumberOfWorksheets As Integer
Dim Logo As Shape
Dim LogoZone As Range
NumberOfWorksheets = Worksheets.Count
For Count = 1 To NumberOfWorksheets
With Sheets(Count)
[code].....
I am using Excel 2007 and have a simple enough macro to paste data in to another sheet - simple is what I do best.
Sub Macro1()
'
' Macro1 Macro
With Sheets("data")
.Range("B3").PasteSpecial xlPasteAll
End With
End Sub
I am wanting to change this so that before it pastes any data into B3 it will delete all data from B3:AE22.
I have had a look around and found plenty to delete full rows or worksheets but not just to delete the data in those cells.
I need to write a code to create visio flow diagram with excel inputs(Excel 2007). Attached is the requirement.
Requirement_Specification.docx
Currently I have been tasked with trying to develop a link between an excel spreadsheet and outlook. What they want is for a button to pickup new entries into the sheet and then create outlook events based on several criteria. The first been that is put on several shared calendars, second that the category of the event is call "BID" and gold in color. The last part is where specific information from the spreadsheet fits into the event areas (ie. subject, location, start time, body). I did find code that is a possible solution but manipulating it to what i need. Here is the code.
Code:
Option Explicit
Sub AddToOutlook()
Dim OL As Outlook.Application
[Code]....
As you can see for the most part I have been able to fill in most of the program with what i needed. I have column B on the sheet that has r's on it. If there is an r in that column then the macro creates information from that row, else it skips to the next one. so i need a loop. Also like stated above, how do you make it an event and not a meeting, how do you set the category and lastly for the boy how do i set it so it copies the entire row (column A, Column C to Column L)?
I've already found a TON of threads about this process but nothing that matches specifically what I'm trying to do.
I have a spreadsheet that I'm using to auto fill other tabs with data that only matches specific criteria. Here's what I'm looking to do:
Columns I, J, K, and L may be marked as either Y or N (or blank). I have different sheets that require 1, 2, 3, or 4 of those columns to match Y. For example, on sheet 2 I want to copy the entire row if there's a "Y" match on column I and J. On sheet 3 I want to match "Y" against, I, J, and K. Sheet 4 I need to match only L, etc.
I need the data copied into the existing sheets to start on row 7. I have other data on rows 1-6 that cannot be moved.
I'm running Excel 2007.
I am using MS Excel 2007.
I have column "A" a list of my PDF filenames and File path in Column "B". I want to establish hyperlinks for each of these PDF filenames (column A) and link it with the file path that I generated in Column B.
=HYPERLINK(B1,A1) did it very well, but unfortunately when converting to PDF, the hyperlink is not working, and I believe the conversion retained is only in text, so now my only resort is hardcoding it by VBA.
I am struggling with trying to create a Top 10 list in Excel 2007. I have googled and search the forum but could not find a solution. (Aplogies if i have overlooked a thread)
I have attached an example of my problem.
1. In Column F i would like to extract the names of the Top 10 performers, based on their respective score. Hence, based on the scoring in Column D, Column F should extract the Top 10 performer names from column A.
2. In Column G, same as above, but bottom 10 names
3. From the attachment, you will view some names are highlighted. I.e. Gary & Neil, and Ian & Michael. These are highlighted based on the fact that they have equal scores.
When extracting the Top / Bottom 10 list, i would like to rank the performers with same score differently. e.g. Gary & Neil, both scored 0%, hence they are equal. But in the Top 10 list, i would like to rank Gary higher as his absolute target is higher. (63 vs. 27) . Same applies to Ian & Michael, Michael should rank higher in the Bottom 10 List as his absolute target is higher.
I have a summary page that includes the titles for each tab within the excel 2003 workbook. I want to use the names of the tabs in the summary page and create it into a formula to lookup fixed cells within the various tabs. Sorry for not uploading an excel doc but I was at work earlier and the thread did not load for some reason, so I am reposting it.
View 3 Replies View Related